I'm unable to open a few websites through the DIR-825. I can connect the PC to the ISP modem and these sites open just fine. It's not a browser problem.
I've updated to the very latest firmware and still have the problem. I've also researched this issue and can't seem to find a work-around for this issue.
Region : India
Model : TL-WR740N
Hardware Version : Not Clear
ISP : BSNL BB
I have a BSNL BB connection. When I use the connection directly, without adding TP Link router, all the websites open flawlessly. Once when I connect the wireless router, certain websites for example Yahoomail, pepperfry.com, yepme.com don't open at all. These are just examples, but I'm unable to access many sites which is a bit annoying. But sites such as gmail, youtube, facebook open clean, there are no issues. I didn't make any configuration changes too. I tried it more than three or four times, but there is a restricted access only.
I loaded in Qwest wireless software for their internet and now I can not open half the pages I use to be able to.
View 1 Replies View RelatedI currently have a problem connecting to certain websites via wifi using our home connection. We have the same issue with an HP laptop, Nexus 7 tablet, and also with an iPod. We tried connecting to the internet using other methods or using other connections, and the devices worked as expected.For example when using our wifi, I can open the results page of Google, but when I try to go to the website it won't load. I can download using Google play on my Nexus, but I can't access social networking sites on all three devices.
View 1 Replies View RelatedI was playing a MMO game called Wizard101, when randomly, I disconnected from it. I tried first to re-connect to the game, no success.So I tried going to its website, loads very slowly, sometimes not loading at all.Then I wanted to try go to its fansite, to ask for support there, but it turns out that the fansite isn't loading too.I try to load a few more pages that is related to the game, but none of them will load.However everything else seems to load just like normal.
I try to fix this with using my usuall fixes:
- I tried connecting to the websites on another computer. Didn't work.
- Restarted my internet + reset my router back to standard. Neither did this work.
I haven't changed any of my internet settings in a few months; so I doubt anything there would be the problem.
when i am browsing,automatically new websites are being opened in new tabs.
View 2 Replies View RelatedRegarding to subject above, I using Cisco 1921/K9 which I have bought from ECSM on 19-march 2012 currently facing a problem with the cisco. My problem is the I can’t browse most of the webpages and very slow browsing even I’m using Unifi 10mbps .
I couldn't open websites ex. msn.com / yahoo.com but if i bypass the cisco router there is no issue appear. I have checked the setup and there are no problem on the configuration or the Unifi line . I think it would be any hardware problem. I have attached the info of configuration the cisco .
Been more than 2 years since I purchsed this router from US and has been working flawlessly till now. Lately I have been facing issues with few websites not opening when my laptop is connected to the router using a lan cable. Sites like speedtest.net (I get the download speed but when it needs to upload it is stuck there forever), [URL] is another which just does not open.
I tried opening these sites using e4200 wifi and everything works perfectly. I even updated the firmware to the latest 1.0.05 build 7 Aug 23, 2012 but still the same issue.
My router set to Automatic configuration - DHCP...
Also when I directly connect the internet cable to my laptop lan, everything opens without any issues.
There's a WRT54G2 v1.5 router in the apartment I just moved in to (belongs to my roommate) which crapped out the other day. My computer and iPod touch both recognize the router's signal and connect to it, but I can't access any Web sites after that (both work fine on other wireless networks). I can, however, access the Web via the cable modem, but when I plug an Ethernet cable into one of the ports on the Linksys router, I have the same problem as when I'm connecting wirelessly. So far, I've tried resetting the router (with the reset button on the back), updating the firmware, changing settings (beacon interval, frag & RTS thresholds....saw that suggested on other forums) & leaving the network unsecured (it's currently WPA2/TKIP & AES, what it was originally).Is it safe to say this router's done for, or is there anything else I can do to resurrect it?
View 1 Replies View RelatedI just installed a Cisco ASA 5505 in my company's network,however the network became so slow and many websites cannot be opened or it takes toolong to open (yahoo, hotmail etc.) resulting to a request time out sometimes.
Here is my configuration:
ASA Version 8.2(1) !hostname xxxxxxenable password xxxxxx encryptedpasswd xxxxx encryptednames!interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 !interface Vlan2 nameif outside security-level 0 ip address
[Code].....
When I connect through my router, GMail, Livejournal, Yahoo and Facebook and some other sites are really slow, especially Google and Livejournal. If I connect directly to the modem, they are fine. I've reset the modem to factory and it's still slow on both my Vista PC connected with a cable and my GF's Macbook on wifi. I clear the cookies regularly, use CCleaner, scanned for adware, viruses. What do I do?
View 14 Replies View RelatedI can't block web sites on my DIR655
View 3 Replies View RelatedTwo weeks ago my DIR-825 stopped connecting to some URLs. I made no changes to the router nor did I add any new software. If I tether my laptop to my smartphone, I connect to those URLs without any problems. I connected my cable modem directly to the laptop and I was able to connect to the URLs also.
View 7 Replies View RelatedI have dlink dir-600 router and I want to block access to website [ URL] for only one PC connect to router. i can either block web access to both PCS connected or block entire web access to one PC.
View 1 Replies View RelatedOver the past few months I've noticed that, although my USB adapter picks up a good signal from the router (never less than 65 - 70% signal strength) and stays connected to it I am at times unable to access any websites. It started off happening once or twice a week and could happen for about 5 - 10 minutes at a time but now happens several times a day and can stop me accessing the web even though the USB adapter says that it is still picking up the signal from the router. After a period of time it will just start working again, I don't have to restart the router or anything.I've tried changing the channel to a few different ones after using a utility to see what my neighbours were using but this hasn't made a difference. I'm using a Netgear RangeMax Dual Band Wireless-N USB Adapter. It has the N technology so should work pretty well.The current firmware version is 1.00VG dated 5th May 2009. In the router settings it allows you to search for an update for the firmware however it told me that my current version is the most up to date.
View 7 Replies View RelatedOn my server I host several websites.Last Monday we got our FttH-connection and I'd set up my D-Link DIR 655 to manage our server and other computers.In the webconfig of my router I set up the Virtual Server for several applications (Telnet - 23, HTTP - 80, HTTPS - 443, FTP - 21, SMTP - 25, POP3 - 110, IMAP - 143 and also ports 20, 22 en 81) redirected to my server's IP address.For these items the private port and the public port of each item is the same port number; the protocol is TCP for these items. I didn't change the options Schedule ("Always") and Inbound Filter ("Allow All").
The DNS of my domains (samendienen.nl and some other domains) is set to my new IP-address.May be I forgot some other settings in my D-Link-router.what I have to do to make my websites reachable?
I have 4 computers using the DIR-615. One of them works just fine (windows 7) the other ones (XP sp3) are very slow, one of which is on the wireless the others are plugged in.
View 3 Replies View RelatedI got a new DIR-655 RevB today, and set it all up. It works fine right now in terms of speed, but certain websites (specifically, facebook.com) load very slowly on wireless. I've tried on two computers with different browsers / operating systems and it still loads slow. I also have comcast which I use a linksys router with, and it loads instantly. Connecting through wired works. Also, I get no slow down when connecting wirelessly if I use a VPN. When I do a speed test, I get my full speed, so that's not a problem.
A few things I have tried:
-Changing the wireless channel
-Disabling QoS
-Disabling traffic shaping
-Changing DNS servers
-Transmit only N/G
-Reducing MTU size
-Disable Dynamic DNS
-Disable advanced DNS service
-Connect to facebook through SSL and not
-Turning router off and on again
Also as a side, unrelated problem, whenever I enable a few ports to be forwarded, I can't connect to the internet when either wired or wireless?
In Setup > Parental Control it is possible to set rules attached to specific website URLs. I want to block access from 1am to 6am.
However these rules only apply to websites URL. Is there a way to apply a rule to ALL websites at once? I tried to enter "*" or "*.*" in website URL field but it doesn't work.
Is there a way to block specific computers on the LAN from specific web sites by the domain name? All I can see is that if I put, for example, www.facebook.com, it will be blocked from all computers on the LAN, whereas if I want to block only 192.168.1.3 for example, I have to use the IP address through the Access Control, which is much harder and ****e to some "work around" by the user.
View 3 Replies View RelatedI'm using DIR 600 for home use. Recently, I noticed that I have trouble connecting to some websites (Twitpic.com, 4shared.com) which I never had any problems before I used the wireless router. It doesn't exactly block the websites but rather it won't load completely (i.e., with Twitpic, I can load the site but not the images; for 4shared I really can't load the page itself).Initially, I had problems updating JDownloader after installation. I tried using our old Edimax wired router, and the JDownloader update worked flawlessly. I also tried loading Twitpic while connected via LAN, and it also worked properly.I'm assuming the problem lies with the wireless router but when I set it up for use I only tinkered with the WPA/WPA2 security for a password-secured wifi connection at home, and nothing more since I can't understand the other features.
View 5 Replies View RelatedI've installed aDIR655 for my friend's cafe and found that Clients ( both wired and WIFI ) have difficulties accessing Yahoo and MSN while Googles etc ( and other Newspaper and webmail sites are OK ) is fine.....I tried to reload and reboot and re-config etc but all in vain...
View 1 Replies View RelatedI noticed that no matter what URL I put for a website using HTTPS such as Facebook [url]...
View 1 Replies View Relatedi've lost the ability to view live streaming video (adobe flash, i think) on several websites. it happened gradually over several weeks and now videos will not load. the dir-615 has functioned flawlessly over several years but it might be showing its age now. connecting directly to my com cast broadband modem fixes the problem. can i tweak the router settings or do i need to replace it?
my setup: dir-615, H/W Ver. E1, F/W Ver. 5.00NA, two wired connections to X Box's and one to Win 7 PC. wireless connections to several Win 7 laptops and other tablets/phones. com cast high speed broadband with their Norton security suite.
if replace.....i need a recommendation. the best bang for a buck while staying within a tight budget.
Like others I see on this board, we've got middle- and high-school age kids whose access to FB and other sites needs to be controlled/scheduled.
I thought the DIR-655 was great, in that it has features that, on the face of it, would seem to be ideal for blocking domains and restricting access.
My problem: I've never been able to get this to work.
I've set up schedules and created lists of domains that I want to limit access to according to the schedules, but the only constraint I've ever gotten to stick is blocking access completely to the router.
*None* of the schedule-based or website-based access controls have ever worked; I'll put the block in place to my daughter's computer's MAC address so she shouldn't be able to get to youtube or facebook, save, bounce the router, but then I go by her room and she's still busily chatting away online to her FB friends.
Based on similar posts I've seen on this forum, this may not be a unique problem.
So in a nutshell, this is what I want to do:
1) Block certain computers (identifiable by MAC address)
2) from being able to get to particular named domains (and any of their sub-domains)
3) according to a schedule that I can create and modify.
My preference would be to do this in the router, but again, responses I've seen here suggest that may not be possible.
I am using Comcast as an ISP and have a standalone Arris modem. I, obviously, have a DIR-655 router REV B with a firmware revision on 2.00NA. I have already turned off packet shaping and QOS. Also, I have set the firewall settings to Endpoint Independent for both TCP and UDP, and assigned static IP addresses to my computers. The problem I am having is that whenever I go to any secure websites, i.e. anything that starts with https, it takes an extraordinary long time to log in and to navigate to any webpages therein. I also cannot upload photos to a website and when I try the Speed-test.net website the download speed is OK but the upload test errors out, it doesn't connect.
View 2 Replies View RelatedD-Link Router 615, with Xplornet Satellite Internet <-(internet sucks).
We got the router about 5 months ago and it has been good, few losses of connection and you have to reboot which is understandable. The internet is always random so if the router needs reset/reboot its no problem.
However about a month or so ago its started redirecting constantly once you put a website in the address bar. Its not always the same sites either. Sometimes its google for part of the day, some times the site wont work for a week. It redirects me all the time to the D-Link Router Log In, and no matter how i try to access the website im trying to go to, it redirects me to the D-Link.
Region : Vietnam
Model : TL-WR841N
Hardware Version : V8
Firmware Version :
ISP : VNPT on Vietnam
I have bought WR841 V8.3. Signal show is good, but i ping to router many timeout or delay when i open some website. Ping only geog when i near router.(some time delay)
Region : UnitedKingdom
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version :
ISP :
certain websites couldn't be accessed on any of our devices (mixture of PC's, android and apple devices)After trying everything I could think of and even phoning our internet provider nothing would get the sites to load (Facebook, hotmail to name but two)A friend of mine also said he was having exactly the same problems whereas no one else I know had any problems!.Anyway, after much scratching of head with resetting the router to factory defaults etc the only thing left to test was a direct connection with the modem where all websites worked perfectly!So the problem is 100% the router! Even after a factory restore it still doesn't work with those websites and after talking to my friend it turns out he too has a tp-link router but a different model.
I have this problem i can't open my ports on my D-link 524, i have opened about 6 ports so that my XBOX 360 works with a open nat, i have also set the DMZ to my xbox's IP which is static btw, my PC is also static. This is how i basically tested and it told me that it was not opened. I went into:
192.168.0.1 -> Advanced -> Virtual Servers ->
Enabled
Name: XBL1
Private IP: 192.168.0.100 ( because i was testing it on the computer - if it
were 360 it would be .141 )
Both UDP and TCP at port 3074
Schedule=Always
Apply -> Then restarts modem/router i waited for 2 minutes before turning them on again, i turned router on first because some guide told me to do that.
I did exactly what they did on portforwarding.com then i opened up portchecker and typed in 3074 and pressed check -> This port is NOT opened. What is wrong? This is how my net is set up.
Modem ZyXEL -> D-Link 524 -> D-Link DGS 1005D -> Computer/XBOX.
just upgraded from a Netgear 'G" router to the DIR-655, love the features of the 655 including the USB port. This is the issue, when I connect VPN to my job, I can see all of my files, databases, spread sheets, etc and use them no problem at all. Have a 25 meg connection via Comcast.I can not open my outlook 2003the program opens, however it just sits at trying to connect and then time out. Have tried for 10 days now with no luck. Lan team at job state that "N" routers are blocking traffic and ports that outlook needs, 5 other users have this problem at work.
View 10 Replies View RelatedI have an Open NAT but there's some people i can't connect to. I've treed DMZing and it's doesn't seem to get me to connect to everyone, and i've also tried Port forwarding as well.
View 1 Replies View RelatedI was doing a moving job for relatives and had to set their network back up. In a state of fatigue I plugged a higher voltage cord into the router by mistake. Now, even with the right cord, the power lights won't come on. It still gets hot , so I know electricity is getting inside. I believe I shorted the Zener diode or blew a capacitor and would like to repair. Problem is, the case is smarter than I am, can't see a way to open it. It's a D-Link Model: DIR-615.
View 2 Replies View Related