D-Link DIR-655 :: Outlook Will Not Open Over VPN
Sep 4, 2010
just upgraded from a Netgear 'G" router to the DIR-655, love the features of the 655 including the USB port. This is the issue, when I connect VPN to my job, I can see all of my files, databases, spread sheets, etc and use them no problem at all. Have a 25 meg connection via Comcast.I can not open my outlook 2003the program opens, however it just sits at trying to connect and then time out. Have tried for 10 days now with no luck. Lan team at job state that "N" routers are blocking traffic and ports that outlook needs, 5 other users have this problem at work.
View 10 Replies
ADVERTISEMENT
Aug 22, 2011
I can connect to Internet perfectly fine. I can even VPN back into my office. However, once connected via VPN and I launch my Outlook Client, I'm not able to connect to get emails. When I run a "netstat -a", I get my "SYN_SENT" to all my office domain controllers and exchange servers.However, if I connected via my Starhub USB Broadband dongle, everything works perfectly fine.What settings do I need to do on my router? I tried port forwarding and application rules but none worked.
View 4 Replies
View Related
Feb 18, 2013
I've replaced my old wireless router with a new DIV-655. Now, I can connect to my work's VPN and connect to servers and data via the VPN, but my Outlook client will NOT connect to the Exchange server.It (Outlook) just sits there saying "Trying to connect to Microsoft Exchange.Will it work.
View 3 Replies
View Related
Feb 16, 2013
Region : India
Model : TL-WR740N
Hardware Version : Not Clear
ISP : BSNL BB
I have a BSNL BB connection. When I use the connection directly, without adding TP Link router, all the websites open flawlessly. Once when I connect the wireless router, certain websites for example Yahoomail, pepperfry.com, yepme.com don't open at all. These are just examples, but I'm unable to access many sites which is a bit annoying. But sites such as gmail, youtube, facebook open clean, there are no issues. I didn't make any configuration changes too. I tried it more than three or four times, but there is a restricted access only.
View 4 Replies
View Related
Feb 9, 2011
I have this problem i can't open my ports on my D-link 524, i have opened about 6 ports so that my XBOX 360 works with a open nat, i have also set the DMZ to my xbox's IP which is static btw, my PC is also static. This is how i basically tested and it told me that it was not opened. I went into:
192.168.0.1 -> Advanced -> Virtual Servers ->
Enabled
Name: XBL1
Private IP: 192.168.0.100 ( because i was testing it on the computer - if it
were 360 it would be .141 )
Both UDP and TCP at port 3074
Schedule=Always
Apply -> Then restarts modem/router i waited for 2 minutes before turning them on again, i turned router on first because some guide told me to do that.
I did exactly what they did on portforwarding.com then i opened up portchecker and typed in 3074 and pressed check -> This port is NOT opened. What is wrong? This is how my net is set up.
Modem ZyXEL -> D-Link 524 -> D-Link DGS 1005D -> Computer/XBOX.
View 19 Replies
View Related
Feb 14, 2012
I have an Open NAT but there's some people i can't connect to. I've treed DMZing and it's doesn't seem to get me to connect to everyone, and i've also tried Port forwarding as well.
View 1 Replies
View Related
May 14, 2012
I'm unable to open a few websites through the DIR-825. I can connect the PC to the ISP modem and these sites open just fine. It's not a browser problem.
I've updated to the very latest firmware and still have the problem. I've also researched this issue and can't seem to find a work-around for this issue.
View 7 Replies
View Related
Apr 23, 2012
I was doing a moving job for relatives and had to set their network back up. In a state of fatigue I plugged a higher voltage cord into the router by mistake. Now, even with the right cord, the power lights won't come on. It still gets hot , so I know electricity is getting inside. I believe I shorted the Zener diode or blew a capacitor and would like to repair. Problem is, the case is smarter than I am, can't see a way to open it. It's a D-Link Model: DIR-615.
View 2 Replies
View Related
May 14, 2011
I want to open MORE than the 24 ports that the router configuration allows (DIR-615 Hardware Version: C2 Firmware Version: 3.03RU)?
View 14 Replies
View Related
Jan 4, 2011
I have a DNS-323 that I can;t get my FTP to work.For some reason no matter what I try I can't open ports on the DIR-655I have the virtual server set as such. [URL]. Checked with open port tool.
View 6 Replies
View Related
Nov 7, 2012
I have two xbox 360's and two ps3's(my brother has his own set and I have my own). I can not figure out how to have two of them running at the same time with open nats, but if one is on then it has a open nat. Also, when I'am on my xbox and my brother on the ps3, his nat is open and mine is moderate. By the way I have uPnP on and have firmware 2.10.
View 1 Replies
View Related
Jul 16, 2011
cant open the ports 2300 -2400 (udp, tcp)on router. What I do isthe following.
1. Open ports on router in port forwarding.
2. Add the triggers as well in APPLICATION RULES with the ports. Triggers are 47624 and 6073.
3. Try both Dis and Enable UPNP. Even try the DMZ enabled settings.
4. Disabling firewalls on Laptop and router. Try both ways on DMZ's(enable and disable) settings on router. Check everything.
Still when I check on websites about the ports and they are shown closed (NOT STEALTH). Router uses a firmware 4.0. I have a windows 7 64 bit system. I use wireless.
Note: All the steps are performed in a combinations manner to see if there is any possibility of opening ports.
View 3 Replies
View Related
Oct 21, 2011
I have had this router for a while now and I have been experiencing these problems for forever. I can't seem to have two Xbox360's stay on OPEN NAT type permanently. I have tried port forwarding both xbox's, just my xbox, just my dad's xbox etc.. I have tried DMZ on one with or without the other on Port Forwarding. I have turned UPNP on I have it so the filtering is set to endpoint independent . I have tried without . I have even tried port triggering today. I have manually set static ip addresses on both the xbox and the router. I even have the most recently upgraded firmware. Now... How do I get TWO Xbox 360's on OPEN NAT ? How to get two xbox360's on permanent OPEN NAT status.
View 6 Replies
View Related
Feb 8, 2012
II bought a DIR-655 (not sure what rev I have)router and noticed my NAT had changed from open to strict.shen playing Modern Warfare 3 on the Wii. I didn't have that problem with the DIR-615 I replaced. I tried to set it up in the DMZ and I tried the port forwarding and neither of them worked. I am not ruling out operator error. I've tried to piece together the information from several different forums and websites but all are slightly different.
View 5 Replies
View Related
Apr 25, 2011
I recently upgraded my DIR-655, H/W Version A3 from 1.21 w/o SecureSpot to 1.35NA. My understanding this that this version isn't supposed to have any SecureSpot support. However, whenever the router is rebooted, the logs contain an entry that reads:
Bsecure remote access enabled on port 8098.
View 10 Replies
View Related
Jul 23, 2011
I have tried to open ports, but if I use the [URL], I just get the closed. I have tried to use the Viritual server function, but can`t se to get it open.
On my old, D-Link I also had something cal port forwarding, this is not here. Here is a link to an emulator of the router: [URL]
View 13 Replies
View Related
Aug 16, 2012
how to open the tp-link interface setup for my TD-W896ON? i have a user and a password but where do i add them ??
View 1 Replies
View Related
Feb 23, 2013
Region : Others
Model : TD-W8960N
Hardware Version : Not Clear
Firmware Version :
ISP :
Region : Sweden
Model : TD-W8960N
Hardware Version : Not Clear
Firmware Version :
ISP :
opening of some ports 25565 for minecraft so i can host games. i have try so solve this by my self but with zero progress. did enter the advanced setup and then i pressed on the NAT category and then i pressed on the ADD button and enter the following" [URL] and then i used a port checker to look if it worked but did not work?
View 2 Replies
View Related
May 23, 2012
I have the port numbers but do not know how to proceed from there. Router is a WRT160N V2.
View 9 Replies
View Related
Mar 27, 2013
I have four DCS-942L cameras and a 2012 model Airport Express router. I cannot view live video from outside the router in any fashion other than mydlink.com's poor quality time-limited forwarded video. Here is what I have done.I have manually mapped four TCP ports through the router for accessing the cameras' web servers. This works--I can access the camera settings that way, albeit with NO SSL support (dammit). So, fundamentally, port forwarding works on this router. The "live view" accessed through the camera's web server does not work, though.I mapped port 554 on each camera to ports on the WAN side of my router, TCP and UDP.I have made sure that the external ports set on the camera under "Enable UPNP port forwarding" are the same as the external ports set on my router. (Otherwise the web server wouldn't work from outside.)When I access the mydlink web site from inside the LAN, I can view my video. When I run netstat -n -p tcp, I can see connections open to the local 192.168.0.* addresses of my cameras, so it is connecting via the LAN.If I connect to the Internet outside my LAN, and use the mydlink web site, I get the forwarded, mini-sized video with a 60 second limit. netstat reveals that connections are being attempted to the INTERNAL ip addresses of my cameras, which of course cannot succeed from outside. In addition, if I try to stream video using QuickTime Player from outside, using the URL [URL], the player connects, then says "waiting for stream" and then "switching transports." It gets stuck there and does not proceed. On the LAN, using the local IP address, I can stream video just fine.
Any way to change this?What other ports do I need to open to make the video stream work? I tried mapping ports 5556-5559 to one of my cameras, but that did not work. Also, I have four cameras and need to be able to map to all of them for this to work.The AirPort Express supports "NAT Port Mapping Protocol" which, from my limited research, is not the same as UPNP. How to successfully viewed video from outside a router without using UPNP?I have scoured these forums considerably and have read some success stories using UPNP. From the DCS-942L manual, it seems like I should be able to set up manual port forwarding in some fashion to make the video stream work. Clearly, though, some auxiliary connection is being attempted and the client cannot get through to the camera. Is it possible to even pick this statically, or is the port always dynamically chosen by the camera and therefore absolutely must be set up on the router using UPNP? If I can't make static port forwarding work, then these cameras are headed to camera heaven soon.
View 5 Replies
View Related
Jan 27, 2013
Region : Others
Model : TL-MR3420
Hardware Version : V2
Firmware Version : 2.1
ISP : PTCL
trying to connect to router configuration (after several factory resets) at 192.168.0.1 but each time screen displays invalid username / password,doesnot even display username / password window,using admin as username and password,just cannot log on to configuration setup
View 3 Replies
View Related
Mar 18, 2013
Recently had an external security scan done on my DIR 655 and scan results are stating I have an accessible TFTP Server running. i've been through all the settings, and even upgraded to the latest firmware. Yet security scans are telling me I've got a TFTP Server running. Why would one be showing on the external interface, and how can I stop it?
View 7 Replies
View Related
Feb 18, 2013
Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 0.5 v000e.0 Build 121225 Rel.42874n
ISP :
Just checked and port 7547 which is used for CWMP is open by default even if the settings are showing disabled. Try http://"external IP address":7547
View 6 Replies
View Related
Feb 15, 2011
How to create a Yahoo E-mail Address?
View 1 Replies
View Related
Nov 16, 2011
Since Monday, when I have tried to access my emails in Outlook, a box pops up saying Enter Network Password The box is already prepopulated, with Server: pop3.live.com User name: my email address and a password that shows up as a bunch of stars.
Clicking on "ok" or "cancel" just causes the box to pop up again. (I can still access my emails on Hotmail, BTW, and all internet is working fine). I access the web through Qwest/Century link and MSN.
I am hesitant to delete the password 'cause who knows what it is?? It is NOT my Windows Live/Live Mesh password, as it has one too many stars. But the box came up prepopulated so I assume at some point this was the correct password.
In the past when this happened, you could call Qwest/Century Link and they would walk me through (as best as I remember) redoing all the pop 3 settings. Now, they say they "don't support" MSN.
View 2 Replies
View Related
Jul 24, 2011
i want to configure outlook messanger on my machine how to do it
View 2 Replies
View Related
Mar 15, 2012
Outlook keeps losing the connection to the PST file on the server. I then have to close outlook and restart then it works fine. But after a while when I have not looked at it, it loses the connection again and again. I can send and receive e-mail.
View 2 Replies
View Related
Aug 9, 2011
I work in a two-person office that uses Comcast as their ISP. All of a sudden neither of us can't access our email via Outlook 2007 using hostmonster's servers. I was also unable to ping their IP Address from the command prompt though I could ping any other web site I tried successfully. Comcast says they are not blocking it. When I went home where I use Comcast I was able to access my email. I removed Webroot's security software which did not work. Windows Firewall is now being used.
View 2 Replies
View Related
Apr 4, 2012
My company have just set up a new subsidiary. I have had a request from my Managing Director asking if it is possible for us to share calendars with the other company so if he wants to make a meeting appointment he can check if Joe Bloggs from the subsidiary is free.There is domain A (parent company) and domain B (subsidiary)Both us and the subsidiary are currently running Microsoft Exchange 2007 on windows SBS 2008 server with mainly windows 7 clients with Outlook 2007-2010?Is it possible to share calendars between the 2 domains?
View 7 Replies
View Related
Dec 4, 2012
I am using a verizon wifi unit. I us outlook 2007. I can receive emails but I cannot send emails. How can I adjust the settings to send emails using my wifi?
View 3 Replies
View Related
Apr 5, 2011
I have been using outlook for a while but I don't know what is offline or online mode.
View 1 Replies
View Related
Jun 26, 2011
I have an AD User, lets call them workauser and there password just expired, so next logon to the domain they need to change there password.They decide while at home to connect to Outlook Web Access, which authenticates to via ACS 5.1 to AD, when they try and connect they are denied with the following message in ACS -
24407 User authentication against Active Directory failed since user is required to change his password Authentication failed.
Check the password expiry under Account options in the properties of an external database user. If the password is expired and the Enable Change Password is turned on in the Users and Identity Stores: External Identity Stores > Active Directory page, then the password will be changed.
Now, our OWA is not configured to allow password resets, so they must call in to have there password reset, or they can connect via VPN and our ASA allows them to change there password as configured under Identity Stores > Active Directory > Enable Password Change
This VPN password change is successful although OWA still will not work. The only way to fix it is to select passwsord does not expire within AD. Let it replicate, then de-select password does not expire and let it replicate.
This is pointing to a OWA issue in my opinion, although ACS is somehow involved, is it possible that ACS caches authentication, or because OWA does not allow password resets, it keeps responding with user required to change his password?
View 7 Replies
View Related
Nov 30, 2012
I have a mac and an android connected to a wireless network and can not open outlook express on both at the same time. Is that just the way it is.
View 2 Replies
View Related
