I have two xbox 360's and two ps3's(my brother has his own set and I have my own). I can not figure out how to have two of them running at the same time with open nats, but if one is on then it has a open nat. Also, when I'am on my xbox and my brother on the ps3, his nat is open and mine is moderate. By the way I have uPnP on and have firmware 2.10.
View 1 RepliesWe recently upgraded to the linksys ea4500 router. My brother plays call of duty on the PS3 and I play call of duty on the Xbox. The issue is we cannot figure out how to have open NAT on both consoles at the same time. I've read multiple support guides, but they don't seem to work. I'm pretty sure it's possible since I've gotten both to be open after reseting the router. The problem is it doesn't stay open on both for very long. We can get one to be open, while the other is stuck on moderate.
We've tried port range forwarding and port range triggering. By default, the PS3 is open. To get the Xbox to open, i disable 'filter anonymous requests' in the security settings, and disable UPnP. (With UPnP enabled, the is ps3 is open & xbox is moderate, with it off, xbox is open and ps3 is moderate).
My friend and I live about 2 blocks away from each other, and for the last few months we cannot connect to each other on any game whatsoever on our PS3 and Wii. We can each connect to anyone else, but we simply can't connect to each other. It used to work just fine, but then all of a sudden it decided not to work anymore. We both have gotten new routers since then, and we've tried mixing and matching using the different routers, but that didn't work.
View 2 Replies View RelatedI have 3 xbox 360s in the house and im having nat trouble with them, i am currently using an actiontec pk5000, from centrylink. i need to know if there is a way to open all ports on this router or if i should get a router/switch that i can open the ports on and use dmz on the actiontec for the new router to make this work.
View 2 Replies View Relatedwhen i am browsing,automatically new websites are being opened in new tabs.
View 2 Replies View RelatedI am having a problem getting multiple PS3's to have an open Nat type for when we Play Call Of Duty Black Ops. I can get my PS3 to have an open Nat type just fine but how can I get it so when my friend brings his PS3 over that he can also have an open nat type as well. His is always strict therefore making it harder to connect and or he may get kicked from a match more often unlike myself. my router is a Linksys WRTU54G-TM but I also have a Linksys WRT54G that I can hook up and Use.
View 5 Replies View RelatedI have a client with a cisco 1841 router with a static public ip. He has 3 dvr's he wanted to acces from the internet and we opened the ports for the dvr's ip's. The issue were having is that only the first ip that we opened shows the port opened and works ok, the other 2 ip with their ports show closed.
View 17 Replies View RelatedRegion : India
Model : TL-WR740N
Hardware Version : Not Clear
ISP : BSNL BB
I have a BSNL BB connection. When I use the connection directly, without adding TP Link router, all the websites open flawlessly. Once when I connect the wireless router, certain websites for example Yahoomail, pepperfry.com, yepme.com don't open at all. These are just examples, but I'm unable to access many sites which is a bit annoying. But sites such as gmail, youtube, facebook open clean, there are no issues. I didn't make any configuration changes too. I tried it more than three or four times, but there is a restricted access only.
I have this problem i can't open my ports on my D-link 524, i have opened about 6 ports so that my XBOX 360 works with a open nat, i have also set the DMZ to my xbox's IP which is static btw, my PC is also static. This is how i basically tested and it told me that it was not opened. I went into:
192.168.0.1 -> Advanced -> Virtual Servers ->
Enabled
Name: XBL1
Private IP: 192.168.0.100 ( because i was testing it on the computer - if it
were 360 it would be .141 )
Both UDP and TCP at port 3074
Schedule=Always
Apply -> Then restarts modem/router i waited for 2 minutes before turning them on again, i turned router on first because some guide told me to do that.
I did exactly what they did on portforwarding.com then i opened up portchecker and typed in 3074 and pressed check -> This port is NOT opened. What is wrong? This is how my net is set up.
Modem ZyXEL -> D-Link 524 -> D-Link DGS 1005D -> Computer/XBOX.
just upgraded from a Netgear 'G" router to the DIR-655, love the features of the 655 including the USB port. This is the issue, when I connect VPN to my job, I can see all of my files, databases, spread sheets, etc and use them no problem at all. Have a 25 meg connection via Comcast.I can not open my outlook 2003the program opens, however it just sits at trying to connect and then time out. Have tried for 10 days now with no luck. Lan team at job state that "N" routers are blocking traffic and ports that outlook needs, 5 other users have this problem at work.
View 10 Replies View RelatedI have an Open NAT but there's some people i can't connect to. I've treed DMZing and it's doesn't seem to get me to connect to everyone, and i've also tried Port forwarding as well.
View 1 Replies View RelatedI'm unable to open a few websites through the DIR-825. I can connect the PC to the ISP modem and these sites open just fine. It's not a browser problem.
I've updated to the very latest firmware and still have the problem. I've also researched this issue and can't seem to find a work-around for this issue.
I was doing a moving job for relatives and had to set their network back up. In a state of fatigue I plugged a higher voltage cord into the router by mistake. Now, even with the right cord, the power lights won't come on. It still gets hot , so I know electricity is getting inside. I believe I shorted the Zener diode or blew a capacitor and would like to repair. Problem is, the case is smarter than I am, can't see a way to open it. It's a D-Link Model: DIR-615.
View 2 Replies View RelatedI want to open MORE than the 24 ports that the router configuration allows (DIR-615 Hardware Version: C2 Firmware Version: 3.03RU)?
View 14 Replies View RelatedI have a DNS-323 that I can;t get my FTP to work.For some reason no matter what I try I can't open ports on the DIR-655I have the virtual server set as such. [URL]. Checked with open port tool.
View 6 Replies View Relatedcant open the ports 2300 -2400 (udp, tcp)on router. What I do isthe following.
1. Open ports on router in port forwarding.
2. Add the triggers as well in APPLICATION RULES with the ports. Triggers are 47624 and 6073.
3. Try both Dis and Enable UPNP. Even try the DMZ enabled settings.
4. Disabling firewalls on Laptop and router. Try both ways on DMZ's(enable and disable) settings on router. Check everything.
Still when I check on websites about the ports and they are shown closed (NOT STEALTH). Router uses a firmware 4.0. I have a windows 7 64 bit system. I use wireless.
Note: All the steps are performed in a combinations manner to see if there is any possibility of opening ports.
I have had this router for a while now and I have been experiencing these problems for forever. I can't seem to have two Xbox360's stay on OPEN NAT type permanently. I have tried port forwarding both xbox's, just my xbox, just my dad's xbox etc.. I have tried DMZ on one with or without the other on Port Forwarding. I have turned UPNP on I have it so the filtering is set to endpoint independent . I have tried without . I have even tried port triggering today. I have manually set static ip addresses on both the xbox and the router. I even have the most recently upgraded firmware. Now... How do I get TWO Xbox 360's on OPEN NAT ? How to get two xbox360's on permanent OPEN NAT status.
View 6 Replies View RelatedII bought a DIR-655 (not sure what rev I have)router and noticed my NAT had changed from open to strict.shen playing Modern Warfare 3 on the Wii. I didn't have that problem with the DIR-615 I replaced. I tried to set it up in the DMZ and I tried the port forwarding and neither of them worked. I am not ruling out operator error. I've tried to piece together the information from several different forums and websites but all are slightly different.
View 5 Replies View RelatedI recently upgraded my DIR-655, H/W Version A3 from 1.21 w/o SecureSpot to 1.35NA. My understanding this that this version isn't supposed to have any SecureSpot support. However, whenever the router is rebooted, the logs contain an entry that reads:
Bsecure remote access enabled on port 8098.
I have tried to open ports, but if I use the [URL], I just get the closed. I have tried to use the Viritual server function, but can`t se to get it open.
On my old, D-Link I also had something cal port forwarding, this is not here. Here is a link to an emulator of the router: [URL]
how to open the tp-link interface setup for my TD-W896ON? i have a user and a password but where do i add them ??
View 1 Replies View RelatedRegion : Others
Model : TD-W8960N
Hardware Version : Not Clear
Firmware Version :
ISP :
Region : Sweden
Model : TD-W8960N
Hardware Version : Not Clear
Firmware Version :
ISP :
opening of some ports 25565 for minecraft so i can host games. i have try so solve this by my self but with zero progress. did enter the advanced setup and then i pressed on the NAT category and then i pressed on the ADD button and enter the following" [URL] and then i used a port checker to look if it worked but did not work?
I have the port numbers but do not know how to proceed from there. Router is a WRT160N V2.
View 9 Replies View RelatedI have four DCS-942L cameras and a 2012 model Airport Express router. I cannot view live video from outside the router in any fashion other than mydlink.com's poor quality time-limited forwarded video. Here is what I have done.I have manually mapped four TCP ports through the router for accessing the cameras' web servers. This works--I can access the camera settings that way, albeit with NO SSL support (dammit). So, fundamentally, port forwarding works on this router. The "live view" accessed through the camera's web server does not work, though.I mapped port 554 on each camera to ports on the WAN side of my router, TCP and UDP.I have made sure that the external ports set on the camera under "Enable UPNP port forwarding" are the same as the external ports set on my router. (Otherwise the web server wouldn't work from outside.)When I access the mydlink web site from inside the LAN, I can view my video. When I run netstat -n -p tcp, I can see connections open to the local 192.168.0.* addresses of my cameras, so it is connecting via the LAN.If I connect to the Internet outside my LAN, and use the mydlink web site, I get the forwarded, mini-sized video with a 60 second limit. netstat reveals that connections are being attempted to the INTERNAL ip addresses of my cameras, which of course cannot succeed from outside. In addition, if I try to stream video using QuickTime Player from outside, using the URL [URL], the player connects, then says "waiting for stream" and then "switching transports." It gets stuck there and does not proceed. On the LAN, using the local IP address, I can stream video just fine.
Any way to change this?What other ports do I need to open to make the video stream work? I tried mapping ports 5556-5559 to one of my cameras, but that did not work. Also, I have four cameras and need to be able to map to all of them for this to work.The AirPort Express supports "NAT Port Mapping Protocol" which, from my limited research, is not the same as UPNP. How to successfully viewed video from outside a router without using UPNP?I have scoured these forums considerably and have read some success stories using UPNP. From the DCS-942L manual, it seems like I should be able to set up manual port forwarding in some fashion to make the video stream work. Clearly, though, some auxiliary connection is being attempted and the client cannot get through to the camera. Is it possible to even pick this statically, or is the port always dynamically chosen by the camera and therefore absolutely must be set up on the router using UPNP? If I can't make static port forwarding work, then these cameras are headed to camera heaven soon.
Region : Others
Model : TL-MR3420
Hardware Version : V2
Firmware Version : 2.1
ISP : PTCL
trying to connect to router configuration (after several factory resets) at 192.168.0.1 but each time screen displays invalid username / password,doesnot even display username / password window,using admin as username and password,just cannot log on to configuration setup
Recently had an external security scan done on my DIR 655 and scan results are stating I have an accessible TFTP Server running. i've been through all the settings, and even upgraded to the latest firmware. Yet security scans are telling me I've got a TFTP Server running. Why would one be showing on the external interface, and how can I stop it?
View 7 Replies View RelatedRegion : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 0.5 v000e.0 Build 121225 Rel.42874n
ISP :
Just checked and port 7547 which is used for CWMP is open by default even if the settings are showing disabled. Try http://"external IP address":7547
I have a DIR-655_RevB updated with the latest firmware 2.03NA. I have two VPN devices in my house trying to get to my corporate office: a VPN phone and my laptop with a VPN client, both use IPSec. Either device has no problem making a solid VPN connection separate from each other. Meaning that when my laptop is not connected, I can connect the VPN phone with no problem. And when the VPN phone is disconnected, the laptop also has no problem making a solid and stable VPN connection. So I know the router is configured correctly to let thru VPN traffic for either device. i.e. IPSec is enabled, UDP/TCP Endpoint Filtering are both set to Endpoint Independent (and I've tried every other combo), SPI is disabled.
The problem is that I need to have both devices connected simultaneously, which this router is supposed to handle. If I have the VPN phone connected first, then when I launch the laptop VPN client, the VPN phone gets disconnected. I'm assuming that at this point, all VPN traffic is being tunneled back to the laptop. I cannot re-establish the VPN phone connection until I disconnect the laptop client, at which point the VPN phone "automatically" reconnects (meaning I don't have to reboot it, the VPN traffic just somehoe gets redirected back to this device)
... see this blog and this video.
View 13 Replies View RelatedWe can only connect 2 devices at a time. Someone suggested that it may be a setting with my wireless router.
View 2 Replies View RelatedWhen I connect 2 laptops to my router, why does the speed/connection get split? I would understand that if the speed was maxed out or something but it's a lame 500 kb/s connection. Do all wify routers behave this way? It's kind of annoying since there's a trafic quota limit implemented and when someone downloads, the other one can't do s^&t? how to handle this?
View 8 Replies View Relatedwhat I want to do is setup a Tablet for use and share my one Internet connection with it and my desktop. I do not want the desktop and the Tablet networked with each other. there is a Tablet on Newegg: Velocity Micro Cruz Reader R103. the details say it's communication is 802.11b/g Wireless LAN. so I copy and paste that on Newegg and get: D-Link DIR-601 Wireless Broadband Router. not sure if that's what i need or what the configuration would be but I kind of know how to set it up.my question is can I connect a Desktop and a Tablet or any PC device to a router like this with out networking the individual units with each other? just to where it serves as more a splitter. is there any wireless alternatives to only "split" the Internet connection and not network the desktop and Tablet?
View 3 Replies View RelatedI remember the Virtual Server instead of Port Forwarding can be setup for multiple PCs to be Remote Desktop accessible from the Internet, but I forget how.
View 2 Replies View Related