D-Link DIR-655 :: Modern Warfare 3 On Wii Has NAT Srict / Need It Set To Open
Feb 8, 2012
II bought a DIR-655 (not sure what rev I have)router and noticed my NAT had changed from open to strict.shen playing Modern Warfare 3 on the Wii. I didn't have that problem with the DIR-615 I replaced. I tried to set it up in the DMZ and I tried the port forwarding and neither of them worked. I am not ruling out operator error. I've tried to piece together the information from several different forums and websites but all are slightly different.
View 5 Replies
ADVERTISEMENT
Mar 21, 2011
Has anybody read The Illustrated Network: How TCP/IP Works in a Modern Network by Walter Goralski? url...I was thinking about picking it up. Does it offer anything new to a student studying for his CCNP?
View 9 Replies
View Related
Jan 26, 2012
My laptop is equiped with an old WLAN adapter, which handles G standard maximum.
How do I replace it with a new compatible WLAN adapter to serve B/G/N all?
View 3 Replies
View Related
Feb 16, 2013
Region : India
Model : TL-WR740N
Hardware Version : Not Clear
ISP : BSNL BB
I have a BSNL BB connection. When I use the connection directly, without adding TP Link router, all the websites open flawlessly. Once when I connect the wireless router, certain websites for example Yahoomail, pepperfry.com, yepme.com don't open at all. These are just examples, but I'm unable to access many sites which is a bit annoying. But sites such as gmail, youtube, facebook open clean, there are no issues. I didn't make any configuration changes too. I tried it more than three or four times, but there is a restricted access only.
View 4 Replies
View Related
Feb 9, 2011
I have this problem i can't open my ports on my D-link 524, i have opened about 6 ports so that my XBOX 360 works with a open nat, i have also set the DMZ to my xbox's IP which is static btw, my PC is also static. This is how i basically tested and it told me that it was not opened. I went into:
192.168.0.1 -> Advanced -> Virtual Servers ->
Enabled
Name: XBL1
Private IP: 192.168.0.100 ( because i was testing it on the computer - if it
were 360 it would be .141 )
Both UDP and TCP at port 3074
Schedule=Always
Apply -> Then restarts modem/router i waited for 2 minutes before turning them on again, i turned router on first because some guide told me to do that.
I did exactly what they did on portforwarding.com then i opened up portchecker and typed in 3074 and pressed check -> This port is NOT opened. What is wrong? This is how my net is set up.
Modem ZyXEL -> D-Link 524 -> D-Link DGS 1005D -> Computer/XBOX.
View 19 Replies
View Related
Sep 4, 2010
just upgraded from a Netgear 'G" router to the DIR-655, love the features of the 655 including the USB port. This is the issue, when I connect VPN to my job, I can see all of my files, databases, spread sheets, etc and use them no problem at all. Have a 25 meg connection via Comcast.I can not open my outlook 2003the program opens, however it just sits at trying to connect and then time out. Have tried for 10 days now with no luck. Lan team at job state that "N" routers are blocking traffic and ports that outlook needs, 5 other users have this problem at work.
View 10 Replies
View Related
Feb 14, 2012
I have an Open NAT but there's some people i can't connect to. I've treed DMZing and it's doesn't seem to get me to connect to everyone, and i've also tried Port forwarding as well.
View 1 Replies
View Related
May 14, 2012
I'm unable to open a few websites through the DIR-825. I can connect the PC to the ISP modem and these sites open just fine. It's not a browser problem.
I've updated to the very latest firmware and still have the problem. I've also researched this issue and can't seem to find a work-around for this issue.
View 7 Replies
View Related
Apr 23, 2012
I was doing a moving job for relatives and had to set their network back up. In a state of fatigue I plugged a higher voltage cord into the router by mistake. Now, even with the right cord, the power lights won't come on. It still gets hot , so I know electricity is getting inside. I believe I shorted the Zener diode or blew a capacitor and would like to repair. Problem is, the case is smarter than I am, can't see a way to open it. It's a D-Link Model: DIR-615.
View 2 Replies
View Related
May 14, 2011
I want to open MORE than the 24 ports that the router configuration allows (DIR-615 Hardware Version: C2 Firmware Version: 3.03RU)?
View 14 Replies
View Related
Jan 4, 2011
I have a DNS-323 that I can;t get my FTP to work.For some reason no matter what I try I can't open ports on the DIR-655I have the virtual server set as such. [URL]. Checked with open port tool.
View 6 Replies
View Related
Nov 7, 2012
I have two xbox 360's and two ps3's(my brother has his own set and I have my own). I can not figure out how to have two of them running at the same time with open nats, but if one is on then it has a open nat. Also, when I'am on my xbox and my brother on the ps3, his nat is open and mine is moderate. By the way I have uPnP on and have firmware 2.10.
View 1 Replies
View Related
Jul 16, 2011
cant open the ports 2300 -2400 (udp, tcp)on router. What I do isthe following.
1. Open ports on router in port forwarding.
2. Add the triggers as well in APPLICATION RULES with the ports. Triggers are 47624 and 6073.
3. Try both Dis and Enable UPNP. Even try the DMZ enabled settings.
4. Disabling firewalls on Laptop and router. Try both ways on DMZ's(enable and disable) settings on router. Check everything.
Still when I check on websites about the ports and they are shown closed (NOT STEALTH). Router uses a firmware 4.0. I have a windows 7 64 bit system. I use wireless.
Note: All the steps are performed in a combinations manner to see if there is any possibility of opening ports.
View 3 Replies
View Related
Oct 21, 2011
I have had this router for a while now and I have been experiencing these problems for forever. I can't seem to have two Xbox360's stay on OPEN NAT type permanently. I have tried port forwarding both xbox's, just my xbox, just my dad's xbox etc.. I have tried DMZ on one with or without the other on Port Forwarding. I have turned UPNP on I have it so the filtering is set to endpoint independent . I have tried without . I have even tried port triggering today. I have manually set static ip addresses on both the xbox and the router. I even have the most recently upgraded firmware. Now... How do I get TWO Xbox 360's on OPEN NAT ? How to get two xbox360's on permanent OPEN NAT status.
View 6 Replies
View Related
Apr 25, 2011
I recently upgraded my DIR-655, H/W Version A3 from 1.21 w/o SecureSpot to 1.35NA. My understanding this that this version isn't supposed to have any SecureSpot support. However, whenever the router is rebooted, the logs contain an entry that reads:
Bsecure remote access enabled on port 8098.
View 10 Replies
View Related
Jul 23, 2011
I have tried to open ports, but if I use the [URL], I just get the closed. I have tried to use the Viritual server function, but can`t se to get it open.
On my old, D-Link I also had something cal port forwarding, this is not here. Here is a link to an emulator of the router: [URL]
View 13 Replies
View Related
Aug 16, 2012
how to open the tp-link interface setup for my TD-W896ON? i have a user and a password but where do i add them ??
View 1 Replies
View Related
Feb 23, 2013
Region : Others
Model : TD-W8960N
Hardware Version : Not Clear
Firmware Version :
ISP :
Region : Sweden
Model : TD-W8960N
Hardware Version : Not Clear
Firmware Version :
ISP :
opening of some ports 25565 for minecraft so i can host games. i have try so solve this by my self but with zero progress. did enter the advanced setup and then i pressed on the NAT category and then i pressed on the ADD button and enter the following" [URL] and then i used a port checker to look if it worked but did not work?
View 2 Replies
View Related
May 23, 2012
I have the port numbers but do not know how to proceed from there. Router is a WRT160N V2.
View 9 Replies
View Related
Mar 27, 2013
I have four DCS-942L cameras and a 2012 model Airport Express router. I cannot view live video from outside the router in any fashion other than mydlink.com's poor quality time-limited forwarded video. Here is what I have done.I have manually mapped four TCP ports through the router for accessing the cameras' web servers. This works--I can access the camera settings that way, albeit with NO SSL support (dammit). So, fundamentally, port forwarding works on this router. The "live view" accessed through the camera's web server does not work, though.I mapped port 554 on each camera to ports on the WAN side of my router, TCP and UDP.I have made sure that the external ports set on the camera under "Enable UPNP port forwarding" are the same as the external ports set on my router. (Otherwise the web server wouldn't work from outside.)When I access the mydlink web site from inside the LAN, I can view my video. When I run netstat -n -p tcp, I can see connections open to the local 192.168.0.* addresses of my cameras, so it is connecting via the LAN.If I connect to the Internet outside my LAN, and use the mydlink web site, I get the forwarded, mini-sized video with a 60 second limit. netstat reveals that connections are being attempted to the INTERNAL ip addresses of my cameras, which of course cannot succeed from outside. In addition, if I try to stream video using QuickTime Player from outside, using the URL [URL], the player connects, then says "waiting for stream" and then "switching transports." It gets stuck there and does not proceed. On the LAN, using the local IP address, I can stream video just fine.
Any way to change this?What other ports do I need to open to make the video stream work? I tried mapping ports 5556-5559 to one of my cameras, but that did not work. Also, I have four cameras and need to be able to map to all of them for this to work.The AirPort Express supports "NAT Port Mapping Protocol" which, from my limited research, is not the same as UPNP. How to successfully viewed video from outside a router without using UPNP?I have scoured these forums considerably and have read some success stories using UPNP. From the DCS-942L manual, it seems like I should be able to set up manual port forwarding in some fashion to make the video stream work. Clearly, though, some auxiliary connection is being attempted and the client cannot get through to the camera. Is it possible to even pick this statically, or is the port always dynamically chosen by the camera and therefore absolutely must be set up on the router using UPNP? If I can't make static port forwarding work, then these cameras are headed to camera heaven soon.
View 5 Replies
View Related
Jan 27, 2013
Region : Others
Model : TL-MR3420
Hardware Version : V2
Firmware Version : 2.1
ISP : PTCL
trying to connect to router configuration (after several factory resets) at 192.168.0.1 but each time screen displays invalid username / password,doesnot even display username / password window,using admin as username and password,just cannot log on to configuration setup
View 3 Replies
View Related
Mar 18, 2013
Recently had an external security scan done on my DIR 655 and scan results are stating I have an accessible TFTP Server running. i've been through all the settings, and even upgraded to the latest firmware. Yet security scans are telling me I've got a TFTP Server running. Why would one be showing on the external interface, and how can I stop it?
View 7 Replies
View Related
Feb 18, 2013
Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 0.5 v000e.0 Build 121225 Rel.42874n
ISP :
Just checked and port 7547 which is used for CWMP is open by default even if the settings are showing disabled. Try http://"external IP address":7547
View 6 Replies
View Related
Feb 2, 2013
How can I allow all ports to be open? I don't really want my 1811 to block any traffic. I tried the command access-list 1 permit any which allows me to surf the internet, but when I check my web server, and port 3389 (Remote desktop) on yougetsignal.com it says those ports are blocked.
View 6 Replies
View Related
Apr 24, 2012
Since downloading constant guard and Norton on my computer, I can connect to a wireless router but cannot open a web browser. My network diagnostics says could not make HTTP/HTTPS/FTP connection.I have tried many different things. IP configuration is correct. It will ping out to the internet and receive back without a problem.
View 8 Replies
View Related
Apr 3, 2012
For a few weeks now, I couldn't open any long links on Twitter. I can only open short links which can be highlighted, then right-click and "switch to 'website'". For example, I can open this link, because it's short enough to highlight the whole thing and then rightclick:It opens like that because it directly goes to that website without going through the shortened link first.When there's a long link like this one it won't open, just bring me to a page which says:"Oops, Google Chrome couldn't find t.co"This was mainly on Twitter, but now I found out that none of the shortened links like bit.ly, etc work either.
View 9 Replies
View Related
Apr 30, 2012
How to make Nas Box accessible by his customers so that they can upload large files to it rather than rely on posting these to him (e.g. on CDs/DVDs).He has the Nas Box for his own use and ideally would like to link it through his business website so that a customer can go there and upload files. Another option seems to be opening the network to his customers as well but I'm not sure about how to approach either of these options.
View 1 Replies
View Related
Feb 4, 2011
My laptop won't open a web page anymore what is wrong? My desktop still opens itwhat can I do to fix it ? When I try to go to the web page I just get a blank screen and that is allIt was working just fine until I installed Adobe pro X
View 1 Replies
View Related
Mar 9, 2011
I was told i need to open certain ports to certain IP's,what ports need to be opened to what IP's for the folowing game as im close to giving up.The games are as follows - Call of Duty 4, Counter Strike 1.6 and Source, Warcraft III, and StarCraft 2
View 2 Replies
View Related
Jun 6, 2012
im using windows 7 when i open my yahoo messenger and gtalk its not opening due to dns prob well my skype opens howz it possible ive done all possiblites but no use and even its not conencting in my phone and if if take my lappi and use it in some other network it opens my question is how does skype opens while havin dns problem.
View 1 Replies
View Related
Nov 3, 2012
Sorry, I realized that this should have been under web and email...not networking so I moved it there.
View 1 Replies
View Related
Feb 10, 2011
We already have wired network and some access points. Today one addition wireless access point (wireless router) is purchased. I'm confused how to start off though I know to configure after I read some articles(disable DHCP, and give lan ip) . In the router, it is written 192.168.1.1, id : admin, pass : admin. We already have router with 192.168.1.1 so if I type 192.168.1.1 , it opens the page of that router. How to open the new router page?
View 6 Replies
View Related
May 15, 2012
The problem is I don't know what to do to open my modem's ports because every single of them except of 80 is blocked,im having some latency problems on online games etc, I asked my ISP and they didnt probably understand what the port is they offered me changing my IP to PUBLIC IP for onetime payment, seeing as they probably dont know what the port is im confused now, will the public ip unblock the other ports?
View 19 Replies
View Related
