D-Link DIR-655 :: Can't Access Web Server From LAN
Jul 22, 2011
I run a web server behind a D-Link DIR-655 (Rev B). I have port 80 opened and forwarded to my servers IP and a domain pointed at my external IP. I can access the server without issue using the domain or external IP from outside of my network, but I can only access it via the internal IP from inside my network. Using the domain or the external IP just gives me a timeout error. I had a Linksys router previously and didn't face this issue.
View 3 Replies
ADVERTISEMENT
Mar 22, 2013
Region : Others
Model : TD-W8961ND
Hardware Version : V3
Firmware Version : 3.0.0
ISP :
My router is TDW8961ND
The firmware version is 3.0.0
The hardware version is 3.0
I am trying to have a virtual http server at port 80 but when I do this and save, I get this message: "Notice: The WAN HTTP port of CPE will be chaged to 8080 if submit successfully."Then after that I cannot access the server at port 80.
View 2 Replies
View Related
Feb 25, 2013
Region : UnitedKingdom
Model : TL-WDR3600
Hardware Version : V1
I am trying to restrict external access to a ftp server I have running, to a single external IP address. Is this possible? It can be done for the Remote Management IP Address page, where you can enter a single address or 255.255.255.255 to allow all external hosts. But the set up of a virtual server does not appear to have that option.
View 1 Replies
View Related
Jan 26, 2013
Region : Singapore
Model : TL-WDR4300
Hardware Version : V1
I need to set up remote access to my HDD connected to my WDR4300, so I can always go online when I am out to retrieve the saved files in the HDD. However I have zero knowledge of network setting of the FTP servers, I can gain access when I am home and connected to the Wireless network, but how to gain access remotely.
View 6 Replies
View Related
Dec 9, 2012
I purchased the EA6500 a few days ago, and when I'm connected to Cisco Connect Cloud I am unable to select Folder Access / FTP Server / Media Server. I click them and nothing happens.Also, the Cisco light on the router keeps blinking.
View 5 Replies
View Related
Mar 3, 2013
Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version : latest
ISP : french orange
I am trying to set up port forwarding on this router but it seems I need to use virtual servers but in all the guides there is a menu for this under the advance settings nat menu.I do not have that option, I have downloaded the latest firmware but still nothing.
View 1 Replies
View Related
May 13, 2013
Region : UnitedStates
Model : TL-WR740N
Hardware Version : V4
Firmware Version : 3.1
ISP : T2
I have a problem with my tp-link router. I dont have an internet access of the router, updated firmware... When i connect to router by laptop the internet works fine, but when i connect to router by phone i have an internet access only 5 second and than i lost it, but still connected. I don't know what is the problem here, maybe phone?
View 3 Replies
View Related
Oct 21, 2012
I have just moved into a new apartment that has a free wifi connection the problem is that my apartment is in the basement at the completly opposite side of the office and i cant get a strong enough signal to connect to the internet and im not very good with computers. the first time i tride setting up the repeater i was able to connect everything and get online but it had changed the ssid and when i tride to change it bacck to its origanil name i lost my internet connection and have not been able to get access the internet again.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: AMD Duron(tm) processor, x86 Family 6 Model 8 Stepping 1
Processor Count: 1
RAM: 479 Mb
Graphics Card: S3 Graphics ProSavageDDR (Microsoft Corporation), 32 Mb
Hard Drives: C: Total - 24385 MB, Free - 3678 MB; D: Total - 13776 MB, Free - 13649 MB;
Motherboard: , KM266-8235
Antivirus: None
View 3 Replies
View Related
Apr 22, 2013
I've been following those instructions to set a dir-615 as a wifi access point connected to a switch : [URL]. I am now able to connect to the 615 either by wifi or by typing it's ip address with another computer connected to the LAN. Connecting to the 615 by wifi, i can do a ping request to urls or receive and send mail with my e-mail client but i can't access websites using my browser.s it possible to get it working without installing some kind of modified firmware? I tried plugging the Internet ethernet cable in the LAN and Internet ports of the 615, none works.
View 3 Replies
View Related
Feb 27, 2012
I get the message "dns server isn't responding" several times per day. If i get the message, nothing can get through to the internet (smartphones, laptop, vita, friends smartphones, etc.) If i reset the router, i can access the web again. Or if i wait for 2 minutes.
This is my setup:
Cable modem connects to D-link 615. Laptop is connected with a cable in D-link 615. All my wireless stuff is connected via wireless D-link 615. My cable modem is also connected directly to my ps3. I'm running windows 7 on my laptop.
View 13 Replies
View Related
Jun 15, 2012
I'm running a Mac OS X Server on my network. I'd like to use the Server's DNS instead of my ISP's. In the D-Link Router I've set the DNS to the OSX server in the WAN section. Unfortunately it doesn't allow my clients on the network to connect to the internet when I do this.
If I set the DNS on the client to the OS X server it works fine. Or if I set the DNS on the router to my ISP's (or Google's) it works fine too.
Is this a route configuration issue? (And if so, what can I do to fix it?) Or is this an OS X Server issue?
View 3 Replies
View Related
Jul 3, 2011
I have have my Dir-655 set up as an access point for awhile and would like to change the wireless access code. I can't seem to figure out how to access the setup menu while it is an access point to do this. How I access the router when it is set up as an access point?
View 4 Replies
View Related
Jan 2, 2013
Im trying to use my DIR 655 as an access point from my new router, which is a TP-Link TL-R860. I've read about every post and blog I can find about this and still cant get it to work. Currently I have a cable running from the TP main router to LAN port 1 on the 655. I then plugged my computer in to LAN port 2 to configure the router.
View 14 Replies
View Related
Jan 30, 2012
I am looking to the best way to add a link to our File server on our network. We have a win 2008 r2 server set up to share a directory for network storage. The storage server has a static IP and the way we access it now it so go to RUN and input "//servername" and it pops up the directory in Win Explorer. This has worked fine but now we are building an Intranet and I need a way to link the Data Storage on the Intranet site.
View 1 Replies
View Related
May 21, 2012
While playing on Diablo 3 using DIR-615, it will always get disconnected from server after 2 to 20 minutes. The router firmware version is 7.12.
View 4 Replies
View Related
Aug 16, 2011
On my server I host several websites.Last Monday we got our FttH-connection and I'd set up my D-Link DIR 655 to manage our server and other computers.In the webconfig of my router I set up the Virtual Server for several applications (Telnet - 23, HTTP - 80, HTTPS - 443, FTP - 21, SMTP - 25, POP3 - 110, IMAP - 143 and also ports 20, 22 en 81) redirected to my server's IP address.For these items the private port and the public port of each item is the same port number; the protocol is TCP for these items. I didn't change the options Schedule ("Always") and Inbound Filter ("Allow All").
The DNS of my domains (samendienen.nl and some other domains) is set to my new IP-address.May be I forgot some other settings in my D-Link-router.what I have to do to make my websites reachable?
View 6 Replies
View Related
Jun 3, 2012
Up to this point, all the computers on the network accessed the e-mail server via the Windows name of the PC running the e-mail server. However, one of the PCs will need to access e-mail from the WAN soon as opposed to the LAN, so I switched the server name in Thunderbird (e-mail client) to the actually fully qualified domain name of the server (registered at NO-IP, which redirects to the e-mail server at home).
The problem I am running into is that all the requests sent for IMAP or SMTP are being blocked by the router. That's even though I added port forwarding rules for them. The logs show messages similar to the following:
"Blocked incoming TCP connection request from 216.168.101.68:51291 to 216.168.101.68:143"
It doesn't make a difference if I change the endpoint filtering to "Endpoint Independent" either. Any thoughts of what else I can try? DMZ is not an option.
View 2 Replies
View Related
May 4, 2010
I have a DIR-601 and I'm trying to play the IOQuake3 game Urban Terror (UT). Every time I try to get a list of servers the DIR-601 stops and reboots.What is that? Flood protection? Something else?
View 4 Replies
View Related
Apr 11, 2013
I am trying to get a L2TP/IPSEC VPN going on one of my servers behind the DIR655 router I have used Port Forwarding and Virtual Server and neithere seem to allow these ports to be open in either situation a port scan shows the ports closed..My ISP (Comcast) does not block these ports?
View 14 Replies
View Related
Feb 8, 2012
Alright, so I'm trying to set up a Minecraft server without having to use some sort of hosting program, such as LogMeIn Hamachi. I have tried port forwarding both my external IP from "whatismyip.com" and from ipconfig in the CMD WITH the correct Minecraft port, and others still cannot connect. note that I can only connect to my own server when I use the IPv4 address from my CMD. get my server working so that others can connect? (I have been sure to change my "server properties" file's "server-ip" line accordingly.)
View 1 Replies
View Related
Feb 23, 2012
Having router issues that is definitely not the routers fault, and most likely not the modem's. I currently have a DIR-655 in place here but have gone through 4 routers and 2 modems trying to resolve this problem.we were having trouble staying connected to a terminal server and would lose access to its URL which is set up with DynDNS. We switched service providers and all was well for a wile until our wireless started to drop, at the time we had a Netgear VPN and a Netgear Access point, and the network would just drop until the router was rebooted, sometimes 2-3 times a day and it would become a morning ritual to reboot the modem/router first thing.We removed the Netgear AP and turned on the wireless on our VPN and tried that along with a new modem, we replaced both with a Cisco VPN with wireless, we migrated to a software vpn solution and installed the current D-link router and the next day the same thing happened, I then replaced the power strip that was feeding the router and modem and that fixed.
View 3 Replies
View Related
Jan 24, 2012
I have a server with SQL Server 2008 on it. It listens on the default ports 1433 & 1434. But traffic is not making it through my DIR-655 to the LAN so that SQL Server can respond to the request. I am using DynDNS and have confirmed that the traffic is getting thru DNS and finding the router, but after watching the syslog I can see that I'm getting multiple of the following error messages when a request is initiated from a client (Microsoft Access app) outside my network:
01-24-2012 22:28:24 System3.Info 192.168.1.1 Tue Jan 24 22:28:28 2012 D-Link Systems DIR-655 System Log: Blocked incoming TCP connection request from 67.167.87.109:53284 to 67.167.87.109:139 01-24-2012 22:28:24 System3.Info 192.168.1.1 Tue Jan 24 22:28:28 2012 D-Link Systems DIR-655 System Log: Blocked incoming TCP connection request from 67.167.87.109:53282 to 67.167.87.109:445
In Port Forwarding I have specified a rule to allow/pass port 1433 & 1434 TCP traffic to my internal server IP.
Also I'm confused by the ports shown above since I was expecting to see 1433/1434 in there...seems this is a factor in the traffic never getting to the SQL Server to process the request?
View 1 Replies
View Related
Jan 17, 2010
I'm having trouble keeping my server asleep. I've been thorough in my process of elimination, and have narrowed it down the DIR-655.
I am trying to get my server to go to sleep after say, 30 mins.. and stay asleep until either me, or my wife try to access a file on it. However, it wakes up around 30 seconds after going into sleep... every time.
I've disconnected everything else from the network, and it still does it. I've disconnected my modem from the router, thus having no WAN access, and it still does it.
No other software is running on the server that is waking it up. No tasks are running that can wake it up. However, if I pull the ethernet cable from the back of the rig, it sleeps just fine.
I've disabled DHCP as all machines have a static IP.
I'm at a loss as to what else to do now. Clearly the router is broadcasting something that keeps the server awake.
I hope so, otherwise the DIR-655 goes into the trash. I need the server to sleep when not required.
View 14 Replies
View Related
Sep 27, 2009
I'm trying to create a route from a VPN ip to the VPN server in my LAN. Anyhow, the DIR-655 does not let me create routing within the LAN (since only the WAN interface option is available).I have tried with the following firmwares: 1.11, 1.21, 1.30.
View 8 Replies
View Related
May 17, 2011
i used the vpn over the weekend to access my comp. and now i can't access the server at my office come Monday . . . my internet works fine, when i ping the ip addy it "timed out" when i run a tracert it shows me step1 step2 vpn addy and at step3 "* * *" symbols and stops there for 30 lines/"hops" same thing . . . i tried accessing the router via web after ipconfig/using the default gateway as the ip for the router but it won't let me saying firewall or proxy setting is there . . . i went to internet options and turned off the proxy setting and same thing, can't access the router via web . . . i've checked the firewall settings for the windows and it's been "off" . . .
View 1 Replies
View Related
May 26, 2011
I am having linking a computer to our SBS server. The computer in question is set in a warehouse on our site. We have a leased internet connection which is used on a number of different offices. The sbs-server has an IP address of 192.168.50.254 with a gateway Ip address of 192.168.50.1. The firewall on this network has an external IP of 10.50.0.37 with a gateway of 10.50.0.254 and this links to the leased line equipment. The external IP address for this network is 62.7.70.237. The PC in the warehouse has an IP address of 192.168.0.2 attached via a router to the leased line. The routers Ip address is 192.168.0.1, the external IP address is 10.50.0.55 and a gateway of 10.50.0.254. This links to the leased line and seems to have an external Ip address of 62.7.70.238. My issue is that I want the PC in the warehouse to be able to connect in some way to the SBS-Server. I cannot seem to access it via the external IP or the gateway (10.50.0.37).
View 2 Replies
View Related
May 13, 2011
i cant connect to most of my friends through xbox and computer, i also cant connect to some games servers. it also says that i have a nat strict. i don't care if my router has no security. i just want my internet to be fast and i can connect to people.
View 1 Replies
View Related
Mar 16, 2012
Under Advanced>DHCP Server, when I put in the Default DNS server of 192.168.0.1 and click save, it goes away. Meaning it doesn't show up anymore.
View 4 Replies
View Related
Jun 28, 2011
Configured a DP-G310 Print Server to work with the DIR 655? I have upgraded the firmware so I have WPA Security. I have typed in the WPA key in the DP-G310 setup. The DIR 655 sees the DP-G310 but it won't assign it an IP address. I can see the DP-G310 MAC address in the DIR 655 wireless status page but the IP is 0.0.0.0 and it disappears and reappears in the wireless connections list.
View 3 Replies
View Related
Dec 3, 2012
Is it possible with the DIR-601 to have one of the IP's on the LAN route all traffic through a proxy server? I would like to have my Roku device (which I've setup as a static on the LAN side) to always connect though a proxy, while all my other devices connect to the internet normally.
View 3 Replies
View Related
Apr 25, 2012
I have an DLINK-dir 815 router.. I have tried for 10 hours to get broadcast IP to work, no luck.. All html/javascript modifications = no luck..The WOL works on LAN, but not over internet, so I figure it's the broadcast IP that needs to be virtual servered?
View 9 Replies
View Related
Feb 18, 2013
I've replaced my old wireless router with a new DIV-655. Now, I can connect to my work's VPN and connect to servers and data via the VPN, but my Outlook client will NOT connect to the Exchange server.It (Outlook) just sits there saying "Trying to connect to Microsoft Exchange.Will it work.
View 3 Replies
View Related
Dec 19, 2012
I just upgraded my dir-835 to the latest 1.03 firmware and it still not working.Plugged an ntfs firmated drive with films on it into the router and windows media player can see and stream from the router but xbox 360 is not detecting the media server !I tried with a dir 857 and xbox works fine but with the dir 853 no go
View 14 Replies
View Related
