D-Link DIR-601 :: LAN Route All Traffic Through A Proxy Server

Dec 3, 2012

Is it possible with the DIR-601 to have one of the IP's on the LAN route all traffic through a proxy server? I would like to have my Roku device (which I've setup as a static on the LAN side) to always connect though a proxy, while all my other devices connect to the internet normally.

View 3 Replies


ADVERTISEMENT

D-Link DIR-655 :: Routing All HTTP / Port 80 Traffic To Proxy Server?

Jul 18, 2011

I have a setup like this.

Foreach computer I need to go and configure the browser proxy settings and some people are getting smart and turn it to automatic configuration again.

So what i want to achieve is to have my DIR-655 to route all the HTTP/port 80 traffic to the proxy server.
That way it is transparent and then it is not needed to configure each computers browser settings.

I am pretty new to this and the router configurations.

The proxy server works fine if i configure the browser manually.

View 6 Replies View Related

Proxy Server / Host File - Redirect Traffic

Feb 16, 2012

So I have a proxy server in my home that all the computers use to access the internet (XP Pro). I edited the host file on the proxy to redirect traffic for various reasons (ad blocking, etc.) But I have noticed that it doesn't seem to affect the computers that use the proxy. For example one entry in the host file could be 127.0.0.1 abc123.com so that abc123.com would loopback to the localhost. For some reason this isn't working. Is there anyway to get this to work without changing the host file on each individual computer?

View 3 Replies View Related

Cisco Firewall :: ASA5505 - Redirect ASA Traffic To Proxy Server?

May 20, 2011

I have ASA5505 with bese-license. I like to install proxy sever in my network and i want redirect traffic to the proxy server.
 
Below  i added configuration in my firewall.
 
ASA(config)#access-list wccp-servers permit ip host 192.168.6.10 any ASA(config)#access-list wccp-traffic permit ip 192.168.6.0 255.255.255.0 any ASA(config)#wccp web-cache group-list wccp-servers redirect-list wccp-traffic ASA(config)#wccp interface inside web-cache redirect in
 
furher configuration and if this configuration is enough, then how to check whther its working or not in my firewall.

View 1 Replies View Related

Cisco VPN :: ASA 5520 - Send PIX501 Traffic Out To Proxy Server?

Mar 17, 2011

I currently have 90 remote locations that have PIX501's. They are all running 6.3 on them.  All of these locations are creating an IPSEC VPN to my ASA 5520 (8.4) at the data center.  Web access at the remote locations is currently being handled with ACL thru split tunnels. This is getting increasingly not fun as I have to reach out and touch them one at a time whenever I have to allow more access to the net. Code...

I would like to keep my split tunnel (if possible) for ports 443 and 21.  I allow access to "any" on those ports and have no plans to change it.

Can I send port 80 down the VPN tunnel to the Proxy/Web Filter and then return the results to the Remote Client.

View 4 Replies View Related

Re-route Traffic Through Server?

Feb 23, 2011

I have a router that supports wireless network. I have 2 desktop computers that connect through LAN, 3 Laptops that connect using WiFi. Lot of them use utorrent. I want to block it. They use it to download movies. I have warned them of consequences but they simply dont listen. I dont know how to implement QoS in my router. Mine is UTStarCom.

View 1 Replies View Related

Cisco Firewall :: ASA 5505 - Redirecting Http And Https Traffic To Proxy Server

Aug 5, 2008

I have an ASA 5505 that I am using to connect my contractors to via an inside interface, the outside interface is my private LAN. I have setup on our corporate Proxy server to allow traffic from my outside interface of my  ASA to go to the internet without credentials BUT log internet activity. The question is I want to know if the ASA can send that http & https traffic to my proxy server and all other traffic to my default route? I want to be able to send all internet traffic to my proxy server. This will avoid me asking the contractors to place proxy credentials in their browsers.

View 6 Replies View Related

Cisco Switching/Routing :: 3750 - Route Traffic From Server To End User?

Jun 3, 2013

Actually i have a design from my customer who have ( Cisco core switch 3750 (allports fiber ports) which is connected to L2 switches , these switches carry servers and end users .the only routing protocol on the access switches is static route ,
 
My question how can i route the traffic from the server to the end user , as the the server is not direct connect to the core switch.

View 6 Replies View Related

D-Link DIR-655 :: Route All Traffic From A Device?

Apr 5, 2012

I have a media player wired to my dir-655. I have a wrt300 on the same network to use for vpn. I live in Canada, and to use Netflix etc, from the US, I need to use the vpn.Is it possible to have the media player routed through the wrt300, rather than discovering all the IP addresses for Netflix etc and routing each one?

View 3 Replies View Related

D-Link DIR-655 :: Create Route From IP To VPN Server In LAN?

Sep 27, 2009

I'm trying to create a route from a VPN ip to the VPN server in my LAN. Anyhow, the DIR-655 does not let me create routing within the LAN (since only the WAN interface option is available).I have tried with the following firmwares: 1.11, 1.21, 1.30.

View 8 Replies View Related

D-Link DIR-615 :: How To Route All Incoming Connections To Default To Web Server

Jan 3, 2013

How to configure my DIR-615 (Hardware Version E1 - Firmware Version 5.00NA) to:

1. Assign/Reserve IP address for 2 machines.

2. Route a web browser to a server on the first machine (port 80) as a default when another computer or smart-phone or device joins my open wireless network.

I am hoping to eliminate any changes to the IP address of the first two computers so that the server's IP address and port are static. I would also like anyone who joins the network to merely open their browser and be presented with the http interface from my server.

View 2 Replies View Related

WNDR3700 Router And HP Procurve 1810g - Route Entire Network Through Proxy?

Apr 10, 2012

I wanted to know if I can somehow setup my network to use a proxy for all connected devices?

For example I can go into Firefox proxy settings and setup to browse using proxy. Is there any way to do this at the router or switch level to not have to configure every device individually I have a wndr3700 router and a HP procurve 1810g switch and am thinking of building a pfsense box.

View 8 Replies View Related

D-Link DIR-655 :: Passing SQL Server Traffic?

Jan 24, 2012

I have a server with SQL Server 2008 on it.  It listens on the default ports 1433 & 1434.  But traffic is not making it through my DIR-655 to the LAN so that SQL Server can respond to the request.  I am using DynDNS and have confirmed that the traffic is getting thru DNS and finding the router, but after watching the syslog I can see that I'm getting multiple of the following error messages when a request is initiated from a client (Microsoft Access app) outside my network:

01-24-2012   22:28:24   System3.Info   192.168.1.1   Tue Jan 24 22:28:28 2012 D-Link Systems DIR-655 System Log: Blocked incoming TCP connection request from 67.167.87.109:53284 to 67.167.87.109:139 01-24-2012   22:28:24   System3.Info   192.168.1.1   Tue Jan 24 22:28:28 2012 D-Link Systems DIR-655 System Log: Blocked incoming TCP connection request from 67.167.87.109:53282 to 67.167.87.109:445

In Port Forwarding I have specified a rule to allow/pass port 1433 & 1434 TCP traffic to my internal server IP.

Also I'm confused by the ports shown above since I was expecting to see 1433/1434 in there...seems this is a factor in the traffic never getting to the SQL Server to process the request?

View 1 Replies View Related

Cisco Firewall :: ASA 5505 - Proxy Server Send Register To Hosted Server Private IP Changed

Aug 23, 2011

We have Cisco ASA 5505 with ASDM 5.2 We have one Proxy server in our Local Lab and pointed to Hosted service(Simple Signal)issue is, When our proxy server send register to hosted server, ASA change private IP and post with outside IP and src port as 1063 every time.

Here is debug log on real time monitoring.
 
Aug 24 2011    05:21:19    302015    203.xxx.xxx.226    192.168.1.51     Built outbound UDP connection 3774 for outside:203.xxx.xxx.226/5060 (203.xxx.xxx.226/5060) to inside:192.168.1.51/27014 (99.119.161.107/1142)
Aug 24 2011    05:21:19    607001    203.xxx.xxx.226         Pre- allocate SIP Via UDP secondary channel for inside:192.168.1.51/27014 to outside:203.xxx.xxx.226 from REGISTER message
Aug 24 2011    05:21:19    710005    203.xxx.xxx.226    99.xxx.xxx.107     UDP request discarded from 203.xxx.xxx.226/5060 to outside:99.xxx.xxx.107/1063

Here 99.xxx.xxx.107 is Our ASA Outside IP address 203.xxx.xxx.226 is Hosted server IP address. My ASA config is attached.

View 2 Replies View Related

Cisco Wireless :: WLC 5508 - Redirect Traffic To Web Proxy

Mar 1, 2013

We need to create Guest WLAN on WLC 5508 which will be used for internet access only. My questions are:
 
1. Is it possible to use our external web proxy server to authenticate users?

2. Can we also forward all traffic to the external web proxy to filter the websites that can be accessed (without configuring it on the browser)?

3. Can this be achieved using the L3 webauth?
 
Our topology:
 
WLC -- Switch -- ASA Firewall -- Internet -- External Web Proxy
 
We are using WLC as DHCP server for Guest WLAN with ASA Firewall as the gateway.

View 6 Replies View Related

Cisco Firewall :: Redirecting Traffic To Proxy From ASA 5505

May 20, 2011

I have ASA 5505 with base license. I like to install proxy server in my network.I configured below commands to forward my traffic to proxy server from my ASA.

If there is any configuration that i need to configure.And if possible send me the configuration guide to setup SQUID server. ( Actually it was set up by the 3rd party vendor)

View 1 Replies View Related

Cisco Application :: Can ACE (4710) Behave As Reverse Proxy For HTTP And SSL Traffic

Jul 12, 2011

Can the ACE appliance behave as a reverse proxy for http and ssl traffic? I would assume it can given how it does SLB but SLB is not a requirement at this time.

View 2 Replies View Related

Cisco WAN :: 2600 - Redirect Web Traffic To External Proxy In Specific Port?

Jan 18, 2010

I want to redirect internal web traffic (browsing) to an external web server for Web, Virus and Spyware filtering. Those externals proxies are running in 8080 port. I have one ASA firewall and a Cisco 2600 router. I was thinking in doing PBR in the router but in the next hop I can only set one IP, not an IP and a port. So how can I redirect web traffic to an external proxy listening in 8080 port?

View 11 Replies View Related

Cisco :: 5508 - Guest Wireless Traffic To Blue Coat Web Proxy

Jan 17, 2012

In my lab I have a Guest Wireless network setup and fully functional. Here is a brief diagram:
 
Client -> AP -> LAN switch and WLC-Foreign -> Core router -> DMZ switch and WLC-Anchor -> Edge Router -> Internet

I have NME for credential management on the LAN as well.The WLC-Foreign is a 5508.In my DMZ, I have two networks - 1 for normal DMZ management and 1 for Guest Wireless.
 
I now have to add a Blue Coat web proxy appliance into the DMZ and have Guest Wireless traffic pass through it. I have tried multiple scenarios including connecting the WLC-Anchor to the Blue Coat directly and making the Blue Coat the gateway for my Guest Wireless network. Any good design for the DMZ networks and/or routing to enable the Guest Wireless traffic to go to the Blue Coat and then out to the Internet?

View 11 Replies View Related

Cisco Firewall :: ASA5510 - Redirect HTTP Traffic To Internal Proxy?

Feb 13, 2011

I am using ASA5510 and i want to know if it is possible to redirect http traffic to an internal proxy software. I explain : PC from the LAN use a internal proxy in their IE browser but some other PC doesn't use it.They are directy connected to the Internet using the Public IP from the WAN interface ( via NAT). Can we redirected this HTTP Traffic from the WAN interface to the Proxy in the LAN ?
 
Http Traffic will be routed like that : PC ->  WAN interface -> Proxy -> WAN interface -> Internet In fact,can we create a rule saying : All http traffic which doesn"t come from the IP Proxy must be redirected toward proxy.

View 6 Replies View Related

How To Use Proxy Server

Mar 26, 2012

my internet connection has dynamic IP. So when I download some file from file sharing site, and if my internet connection breaks, my download can't resume from where it had stopped since my IP adress is changed.But if I stop the download manually (without breaking internet connection), as the IP address remains same, I can resume the download from that point. I mean can I use a proxy server so that everytime the download resumes, it reports a constant (static) IP to the website?

View 6 Replies View Related

Cisco Firewall :: 5510 Unmatched HTTP Traffic To Symantec Public Transparent Proxy

Sep 4, 2012

I am working on a task of redirecting any unmatched http traffic to Symantec public transparent proxy through Cisco ASA. For the definition of uncatched http traffic, we have inbound squid servers for deploying IE proxy pac and redirect the http traffic to Symantec public transpraent proxy, however we can't deploy IE proxy pac to mobile device and non-support web browers.Since we have some application using IE proxy setting for direct http communication with external domains, the current symantec policy addes those domains in the exception list so that they are not redirect to Symantec public transparent proxy server.
 
-For the platform - Cisco ASA 5510 ASA 8.4(4)1

-For the solution, I have the following two nat rules

View 10 Replies View Related

Cisco :: Use ASA Instead Of Proxy Server?

Sep 15, 2011

At the moment we have all our users going through a Proxy Server, Microsoft ISA but I want to know whether I could scrap this and utilise the ASA.

Would it be possible to create a Network Object with an IP range (Domain Users) and then have a list assigned to this of any Websites not permitted?

View 5 Replies View Related

How To Setup Proxy Server

Sep 23, 2011

How would I set up my own anonymous proxy server with my own ip address without having to go on a proxy list site? I don't care how complicated or time consuming it may be, I'm a very fast learner and I do things extremely quickly.

View 3 Replies View Related

Cisco WAN :: 881 Won't Route LAN To WAN Traffic

Nov 15, 2012

Configured cisco 881, WAN has static IP address and LAN is nothing fancy. I can ping out to url... or anywhere from the router but cannot from LAN client computers. [code]

View 4 Replies View Related

Single Proxy Server For Two Different VLAN And ISP?

Jan 17, 2013

I'm looking to implement a single proxy server for two different VLANs. Both VLAN have outgoing traffic configured through different ISP i.e. traffic for users on VLAN1 is routed through ISP1 and traffic for users on VLAN2 is routed through ISP2. Inter-VLAN communication is enabled. The proxy server should route internet traffic for users in VLAN1 through ISP1 and for users in VLAN2 traffic should be routed through ISP2.

View 6 Replies View Related

Proxy Server Software For NAT Static IP

Feb 13, 2012

I have an Static IP address and I want to hide this Static IP address from users. But I dont have router I searched on internet and I got Winproxy software which can does this work but that is only trial version. How to hide my static IP? Any software like Winproxy which works on my server like proxy server i.e protect server from viruses, theft, hackers, Trojens etc.?

View 4 Replies View Related

How To Block Proxy Server Websites

Oct 10, 2011

how to block all proxy server websites in my router ( netgear brand ) so that no one can access anymore to the websites that i already restricted like facebook.

View 2 Replies View Related

Check Connection From Behind Proxy Server?

Oct 16, 2011

My computer (Win 7) is behind a proxy server at work. They have disabled the ping service. They told me it is disabled for security reasons, and everytime I try to ping a host, the connection times out.However I normally use ping as a good diagnostic to check if I have an internet connection or not. We experience frequent network problems, and I'd like to be able to at least narrow down the problem each time. Are there any other diagnostic tools/utilities I can use to test internet access? When I lose my internet connection, I'd like to be able to test if it is because my computer has lost its connecton to the proxy server, or if the proxy server has lost connection to the outside world.

View 6 Replies View Related

How To Configure Router As Proxy Server

Nov 12, 2012

My ISP provides me internet connection through password protecting Access Point bearing IP address 192.168.20.1 built with IP filtering which allows only a particular IP 192.168.20.88. I am not able to access internet on more than one computers simultaneously because router allows only single IP and I am not sure what are the WAN IP's uses Access Point provided by ISP eg. IP, Gateway and DNS. My ISP provides me static IP address for home computer as mentioned below :

IP : 192.168.20.88
Gateway : 192.19.20.1
DNS: 192.168.20.1
Alt DNS : 192.168.20.1

My public IP address is 180.87.210.26.

Is there any option to add a router to bride or configure router as proxy server so that i can access internet more than one PC's simultaneously.

View 5 Replies View Related

Configure Isa Server 2004 Using A Proxy?

Nov 29, 2011

currently we are using a proxy (192.168.45.90) for internet. the internal network ip scheme is 192.168.30.0-254. my problem is that how should i configure the new ISA2004 installation on separate PC with new IP range like 192.168.31.0-254 using that proxy 192.168.45.90.

View 1 Replies View Related

The Proxy Server Is Refusing Connection

Jun 7, 2011

After cleaning the infection, none of my browser will work.Firefox display this message: "The Proxy Server is Refusing Connection".IE displays an error as well.I can't even use Steam's (game client) browser to see what games they have available but I am able to sign on.I am sure my internet is working because I am able to log on to my Instant Messaging Program and chat with freinds and use a VoIP software to talk with friends without issue.The problem is happening on my "regular" windows account.My administrative account seems to be problem free as I am able to browse the net like I had before the infection.

View 11 Replies View Related

Home Network :: How To Route All Traffic Only Via VPN

Aug 21, 2011

I am using OPEN VPN in order to connect to a Canadian VPN server.I want ALL internet traffic to ONLY use the VPN connection and no traffic shall pass through my local ISP under any circumstance.In the event the VPN disconnects, I DO NOT want any internet traffic automatically sent via my LOCAL ISP connection. Can I simply disable my LAN network adapter in windows AFTER the vpn is connected? (since vpn uses its own TAP adapter?)

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved