D-Link DIR-655 :: Create Route From IP To VPN Server In LAN?

Sep 27, 2009

I'm trying to create a route from a VPN ip to the VPN server in my LAN. Anyhow, the DIR-655 does not let me create routing within the LAN (since only the WAN interface option is available).I have tried with the following firmwares: 1.11, 1.21, 1.30.

View 8 Replies


ADVERTISEMENT

Create A Static Route On The TP-Link TD-W8950ND Router?

Jan 26, 2011

I am trying to create a static route on the TP-Link TD-W8950ND router, however am a little confused about the interface I should use. The default gateway on the route is another router on the LAN. I have a choice to use interface pppoe (telstra), LAN/br01 (bridge) or no interface. I was assuming I didn't need to use any interface as this is not a bridge setup and is on the LAN, but when I select "no interface" it doesn't save the static route settings.Also, when I select LAN/br01, the routing saves but doesn't actually work (tracert shows not going through the right router).

View 1 Replies View Related

Home Network :: Cisco 877W - Create Route Or New Link(s)?

Mar 22, 2011

I have the above router on 10.10.10.1 which I'm quite familiar with but I need reaching a VM residing on one of my internal MAC's. My cisco route table is as follows:

Gateway of last resort is 93.97.20.1 to network 0.0.0.0

93.0.0.0/21 is subnetted, 1 subnets
C 93.97.16.0 is directly connected, ATM0.1
10.0.0.0/24 is subnetted, 1 subnets
C 10.10.10.0 is directly connected, BVI1
S* 0.0.0.0/0 [1/0] via 93.97.20.1

The internal physical machine that contains the VM is 10.10.10.9 whose routing table is:

Routing tables

Internet:
Destination Gateway Flags Refs Use Netif Expire
default 10.10.10.1 UGSc 6 8 en0
10.10.10/24 link#4 UCS 5 0 en0
10.10.10.1 0:1b:2b:cc:7:8a UHLWI 7 1248 en0 284
10.10.10.9 127.0.0.1 UHS 0 86171 lo0
10.10.10.11 0:23:54:2a:6:d3 UHLWI 0 234 en0 150
10.10.10.30 0:9:34:28:60:2e UHLWI 0 25 en0 857
10.10.10.111 0:1d:ec:2:2d:2d UHLWI 1 1599 en0 721
10.10.10.255 link#4 UHLWbI 2 18609 en0
10.37.129/24 link#8 UC 2 0 vnic1
10.37.129.2 0:1c:42:0:0:9 UHLWI 1 2 lo0
10.37.129.255 link#8 UHLWbI 2 14046 vnic1
10.211.55/24 link#7 UC 2 0 vnic0
10.211.55.2 0:1c:42:0:0:8 UHLWI 0 2 lo0
10.211.55.255 link#7 UHLWbI 2 14046 vnic0
127 127.0.0.1 UCS 0 0 lo0
127.0.0.1 127.0.0.1 UH 5 214223 lo0
169.254 link#4 UCS 0 0 en0

The VM has a static IP of 10.211.55.5 and can obviously ping out to the rest of my lan but as of yet my router and other machines on the 10.10.10/24 subnet cannot reach the VM. I sort of presume this is a simple task of adding some kind of static route on my router and then all other machine will know how to get to the VM. So what do I need to do as I have about 40 or so customers already connected of whom I do not wish to suddenly halt their access due to my inexperienced attempts to create this route or new link(s)

View 1 Replies View Related

D-Link DIR-601 :: LAN Route All Traffic Through A Proxy Server

Dec 3, 2012

Is it possible with the DIR-601 to have one of the IP's on the LAN route all traffic through a proxy server? I would like to have my Roku device (which I've setup as a static on the LAN side) to always connect though a proxy, while all my other devices connect to the internet normally.

View 3 Replies View Related

D-Link DIR-615 :: How To Route All Incoming Connections To Default To Web Server

Jan 3, 2013

How to configure my DIR-615 (Hardware Version E1 - Firmware Version 5.00NA) to:

1. Assign/Reserve IP address for 2 machines.

2. Route a web browser to a server on the first machine (port 80) as a default when another computer or smart-phone or device joins my open wireless network.

I am hoping to eliminate any changes to the IP address of the first two computers so that the server's IP address and port are static. I would also like anyone who joins the network to merely open their browser and be presented with the http interface from my server.

View 2 Replies View Related

Home Network :: Create A Manual Route Into Laptop

Jun 6, 2012

My laptop have 2 NIC attach it, the cable NIC and Wireless NIC, the cable one connect to my lab network environment and the Wireless connect to office network environment (connect to internet) which both have differen segments [code] when my Wireless was turn off my pc can ping to all segment on my lab network environment, but if the wireless was turn on, i cant ping to others segment but only my laptop segment and i still could surfing to the internet without any problem.then i tried to add a new route from my laptop using "route add x.x.x.x mask x.x.x.x (gateway)" in command line and after that i can ping back to all segment in my lab network environment eventhough my wireless was onwhy i have to create a manual route into my laptop so that i can have connection between my laptop and my lab environment in the condition my wireless turn on ??

View 8 Replies View Related

Cisco Switching/Routing :: Create A Route-map For An EIGRP Distribute List On A N7K?

Apr 26, 2012

I'm trying to create a route-map for an EIGRP Distribute list on a N7K, the goal is to not advertise a 10.0.0.0/8 and 172.31.30.20/32 networks out a link to a remote site while permitting all other traffic to the internet (default). I configured the ACL/route-maps below and applied them outbound on the N7K interface but no subnets at all are being received on the remote site router.

ip access-list DENY_10.0.0.0
  10 permit ip any 10.244.244.20/30 <<--WAN interface network
   20 deny ip any 10.0.0.0/8
   25 deny ip any 172.31.30.20/32
   30 permit ip any any

[code]....

View 0 Replies View Related

Cisco Switching/Routing :: Create Trunk Between 4507 And 3945E Router And Route Two VLans

Feb 12, 2012

i want to create a trunk between 4507 & 3945E router  & route two vlans from router 3945E
  
4507# vlan 99 & 51
# int vlan 99
# ip add 10.22.100.1/24
#int vlan 51
# ip add 10.22.103.1/24

[code].....
 
4507 version : IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSAL-M), Version 03.02.00.SG RELEASE SOFTWARE (fc4)
 
3945E: 15.1(2)T4 what I am missing?

View 3 Replies View Related

Way To Create A Server

Dec 18, 2012

I am running windows 7 ultimate 32bit its been a long time that i've been trying to set a private server for call of duty 4 i've looked all over the web but no guide get my server online.i just read that i need to do something with ports etc(i dont even know what that is)

View 3 Replies View Related

Re-route Traffic Through Server?

Feb 23, 2011

I have a router that supports wireless network. I have 2 desktop computers that connect through LAN, 3 Laptops that connect using WiFi. Lot of them use utorrent. I want to block it. They use it to download movies. I have warned them of consequences but they simply dont listen. I dont know how to implement QoS in my router. Mine is UTStarCom.

View 1 Replies View Related

Servers :: How To Create A Proxy Server In Windows 7

Mar 18, 2011

how to make a proxy server in o.s server 2003

View 1 Replies View Related

Multiple Public IPs To Route To Server?

Jan 17, 2012

we need to implement a scalable solution where we can provide for each customer it's own public IP so that they can access some content restricted by IP range.the solution consists of a proxy software that will "listen" to multiple IP's, then reroute the HTTP requests and rewrite the URL's to a different format.Anyways, we came to the conclusion that what we need is the following:

- broadband line with a pool of 8 IP's
- a router that can support multiple IP's
- a server

what kind of router or device is required for this kind of configuration. basically the network diagram will be like this:

Internet ----> broadband -------> cable modem ------ > multiple static IP router -------> server NIC

we should be able to add the same above combination once we run out of IP's, another broadband line, another device and server ...

View 3 Replies View Related

Add Static Route For New Exchange Server?

Sep 11, 2012

Add static route for new exchange server?

View 1 Replies View Related

Create A Cache Server To Caching Downloaded Files?

Mar 28, 2013

How can I install cache server for caching downloaded files ?I try use Squid for it.but it's not working properly.Squid can caching downloaded files when download the file without Download Managers.(Like IDM)When I use a Download Manager , Squid can't cache the downloaded file. ( Max connections number in IDM = 16) How can I cache downloaded file , when download file with IDM and multi connection mode (max connections number = 16 or 8 )

View 1 Replies View Related

Cisco VPN :: ASA 5505 To Create Web Server That Only Some Ip Address Can Access

Feb 21, 2013

we have a cisco asa 5505 and it working great .i want to create web server that only selected public ip address can access.

View 3 Replies View Related

How To Route Public Ip In A Windows Server With Two Nics

Feb 20, 2012

i have a windows 2003 server using it as a proxy server with 2 nics. 192.xxx.xxx.xxx to the LAN and 172.xxx.xxx.xxx to the internet router. although I can browse on the LAN, i cannot ping any public ip. because of that i cannot use my outlook to get my mail.

View 1 Replies View Related

Linksys Wireless Router :: WRT610N - What Needs To Be Done In Settings To Create VPN Server

Jan 24, 2012

We have a WRT610N wireless router in our office.we want to setup VPN server through a static ip.we dont know what needs to be done in the router settings to create a VPN server. (necessary port forwarding etc)??

View 8 Replies View Related

Cisco Firewall :: Create Dhcp Server Pool On ASA 5510

Jul 16, 2012

I'd like to create dhcp server pool on ASA 5510. I was wondering how big is the DHCP scope that Cisco ASA 5510 can support? Are there any ASA models which can support up to subnet mask 22 for DHCP scope?

View 7 Replies View Related

Cisco Firewall :: ASA 5505 - Create Public Server For DVR Cams?

Apr 19, 2012

I'm trying via the ASDM to port forward http connections to a DVR for the purpose of viewing IP cams.I've tried via ASDM to create a public server but I'm not allowed to use my public IP address for the public Interface.I have only one public IP address available.Is there any way round this ?  I would also like to know how I can enable NAT with PAT.I've tried setting the outside Interface for use with PAT but It keeps reverting to the setting for a range of external addresses.I'm not really used to the ASA cli yet , I'm getting there.If there's a workaround via the CLI , I'll take that route.

View 4 Replies View Related

Cisco Switching/Routing :: 3750 - Route Traffic From Server To End User?

Jun 3, 2013

Actually i have a design from my customer who have ( Cisco core switch 3750 (allports fiber ports) which is connected to L2 switches , these switches carry servers and end users .the only routing protocol on the access switches is static route ,
 
My question how can i route the traffic from the server to the end user , as the the server is not direct connect to the core switch.

View 6 Replies View Related

D-Link DI-524 - Create A Wireless Bridge?

Jun 19, 2011

my wireless router that is connected to the internet is in the basement and my computer is upstairs on the second floor of my house. Because of this the signal is very bad, to fix this problem I bought a Belkin Wireless N300 in order to create a wireless bridge but I am having trouble. My downstairs router is a D-Link DI-524 and I have googled all over the place to find a solution but the belkin router doesn't have a wireless bridging option...

View 2 Replies View Related

D-Link DIR-825 :: No Ability To Create Static LAN Routes?

Feb 6, 2011

Ok I realise that the 825 doesn't have the ability to create static LAN routes. Is there a workaround or is this somthing that may be implemented in the future. It's a real let down to find this feature missing in an expensive router such as this.

View 1 Replies View Related

D-Link DIR-655 :: Create A Wireless Network For Internet Only?

Mar 6, 2012

I have a working wired network and really all I want to do is set up my DIR-655 on it so that it provides internet only for wireless users, but doesn't allow access to the rest of the local network. I though that's what the Guest network would do, but when I connect to that I can still type in local IP addresses and get to those devices.

"Enable Routing Between Zones" is unchecked in the Guest Zone settings.

View 3 Replies View Related

Linksys Wired Router :: Static Route To Access TMG Internal Network Through RV042 Pptp Server?

Mar 20, 2012

Currently i am having a scenario where i have setup RV042 and which is connected to Microsoft Forefront 2010. PPTP works fine only on rv042 subnet but i am not able to access the "internal" network of TMG.RV042 (172.16.1.1) ---> TMG [external] (172.16.1.2) ---> TMG [internal] (192.168.1.1) Is there any way through static route to access the TMG internal network through RV042 pptp server?

View 1 Replies View Related

D-Link DIR-601 :: Route Website Name To Local IP?

Oct 7, 2011

I'm trying to have a website name:  remote.test.com  route to a local IP address but can't seem to get it working with this router.  I don't want to use the windows hosts file as there are different Operating Systems that will connect and so routing though this D-Link is the only option.  I have my wireless router connected to a separate network switch though it's WAN port where other computers sit as well as the target machine.  I can use the internet as normal like this so things are working fine.

[code]...

View 7 Replies View Related

D-Link DIR-655 :: Route All Traffic From A Device?

Apr 5, 2012

I have a media player wired to my dir-655. I have a wrt300 on the same network to use for vpn. I live in Canada, and to use Netflix etc, from the US, I need to use the vpn.Is it possible to have the media player routed through the wrt300, rather than discovering all the IP addresses for Netflix etc and routing each one?

View 3 Replies View Related

D-Link DCS-930L :: Way To Create Java Script For Webcam?

Apr 5, 2012

I urgently need to create a DCS-930L java script for a my website so that the streaming images (different from the visible images on the "my dlink service") can be viewed by visitors even if my PC is off and only router work.In the Modem/router Linksys WAG 320N I opened port 80 (port forwarding) but I can not see them on the web.

View 1 Replies View Related

Cisco WAN :: 2811 - Route Over Mpls Link?

Mar 2, 2012

i have 2 routers 2811 interconnected together ,1 of these router running in circuit with 2 Mbps over Internet the 2nd one use MPLS Circuit with a bandwidth of 4Mbps,how configure the routing to route over the MPLS while IPSec act as standby

View 1 Replies View Related

D-Link DAP-1522 Wireless - Create Access Point Password?

Mar 3, 2013

i cant create dlink acess point password , if I am going 192.168.0.50 then showing error massages , I am check two three computer , then the same error coming

View 1 Replies View Related

D-Link DIR-600 :: Block Incoming Traffic / How To Create Rule Source

Jun 23, 2011

I need to block incoming traffic with Dlink DIR 600. I know how to create the rule source (WAN) to destination (LAN)  to deny all protocols. But what IP will I put in WAN? IP address of my Internet? Or how can I enter the ALL IP range in source...format for the IP (it's not 0.0.0.0).

I want to do this because in the DIR log section I'm being PING Flooded.  I already un-check "Enable WAN Ping Response" but still receiving the message.

View 4 Replies View Related

D-Link DIR-655 :: Create Firewall Rule To Block All DNS Requests Except To Specific Servers

Mar 3, 2011

Using a DIR-655, does anybody know how to create a firewall rule to block all dns requests except to specific servers?

View 2 Replies View Related

TP-Link 150Mbps Wireless :: WR702N - How To Create Access Point For Printing

Mar 5, 2013

Region : United Kingdom
Model : TL-WR702N
Hardware Version : V4.20.0
Firmware Version :
ISP :

Using a TL-WR702N router as a wireless access point on a narrow-boat. How to print from my i Pad and iPhone to a printer on my narrow-boat, on the UK inland waterways. The Apple store geniuses seem to contradict each other on how it can be done, if at all. I have an i Pad and iPhone and would like to print photos, documents and the occasional web page to my Canon MG4250 printer, which has Air print capability, while I am cruising. I don't have a PC on the boat and of course there is no telephone or broadband connection (other than via 3G on my iPhone). In other words, I want to link my printer to a router, then when required, wireless connect to the router to print from my Apple devices.

Will the TP Link TL-WR702N 150Mbps Wireless N Nano Router allow me to do this? Reading the product information, this nano router looks very flexible, but all five modes mentioned seem to utilize an internet connection. I only have an internet connection via 3G on my iPhone, and can also tether the i Pad to the iPhone's WiFi hotspot to give internet connection on the i Pad. Would I have to use this internet connection somehow, or can I just connect the Apple devices to the printer via the WiFi on the nano router?

In effect I want to create a wireless access point for printing, without any, or at least a regular, internet connection.

View 4 Replies View Related

TP-Link 150Mbps Wireless :: WR741ND Does Not Route Between Local LAN And The Internet

Dec 1, 2012

Region : Argentina
Model : TL-WR741ND
Hardware Version : V4
Firmware Version : 3.13.12
ISP : Triple C

I'm trying to set up my new WR741ND router to replace the old WR541G with excctly the same cabling,ISP account etc.
All seem to be working i.e. I get the PPPoE connection against the ISP and cat ping by name to Internet addresses from THE ROUTER.Also I get DHCP handing out addresses both to my desktop connection by Ethernet cable and to my laptop via Wifi.And the computers may ping the router and also connect its admin GUI.However,the computers stop at the router and can't go further.All they can go is to the router as if it doesn't route between LAN and WAN.With the 541 router everything works and as I said it has the same setup (very basic,no static routes or anything too smart).

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved