Multiple Public IPs To Route To Server?

Jan 17, 2012

we need to implement a scalable solution where we can provide for each customer it's own public IP so that they can access some content restricted by IP range.the solution consists of a proxy software that will "listen" to multiple IP's, then reroute the HTTP requests and rewrite the URL's to a different format.Anyways, we came to the conclusion that what we need is the following:

- broadband line with a pool of 8 IP's
- a router that can support multiple IP's
- a server

what kind of router or device is required for this kind of configuration. basically the network diagram will be like this:

Internet ----> broadband -------> cable modem ------ > multiple static IP router -------> server NIC

we should be able to add the same above combination once we run out of IP's, another broadband line, another device and server ...

View 3 Replies


ADVERTISEMENT

How To Route Public Ip In A Windows Server With Two Nics

Feb 20, 2012

i have a windows 2003 server using it as a proxy server with 2 nics. 192.xxx.xxx.xxx to the LAN and 172.xxx.xxx.xxx to the internet router. although I can browse on the LAN, i cannot ping any public ip. because of that i cannot use my outlook to get my mail.

View 1 Replies View Related

Cisco WAN :: 5505 Route Public Ip Addresses To DMZ Port

Sep 25, 2011

I have a customer thats got a Linksys router now, that has a DMZ port.The DMZ port is configurede to it routes the extra public ip-adress to the DMZ port it has.At the DMZ port they have another router connected, where they routes the public ip-adresses på some other devices.How can i make this setup on a Cisco ASA 5505 (With the Security Plus licens)What i have to do is to replace the Linksys router, and make it so, so it works like it was before with the Linksys.

View 5 Replies View Related

Cisco WAN :: 1841 Unable To Route Public IPs On 1921 ISR

Jun 16, 2011

I've got an existing Cisco 1841 connecting to a 10Mbps Internet Leased line. With my current setup I've configured PAT for internet access for my users, and we also have some servers on site which are assigned public ip addresses, these can be accessed from the internet. Now we have procured a Cisco 1921 ISR to replace the old 1841, when I connect the 1921 with an identical configuration in place of the old router, 2 things happen.

1) The users accessing the net via the nat are able to work without any inconvenience (good)

2) My servers which have public IP addresses are unable to reach the internet and subsequently I am unable to reach them via the internet (very bad)

View 10 Replies View Related

Cisco :: Multiple Public Subnets On Asa

Mar 2, 2012

I've currently got my ASA (5505) serving a /28 public subnet. I've ran out of IPs, so my DC has issued me an additional /24 subnet that they have routed to my ASA. What needs to be done on my ASA so be able to use these new addresses? I've been trying to search and not been able to find a good answer (some say I shouldn't have to do anything, everything else references NATing, which I currently don't do and would rather not do).The servers I assign these to, I'd like them to have the public ip assigned directly to them.

View 5 Replies View Related

Cisco WAN :: Configuring 861 NAT With Multiple Public IPs

Jan 20, 2012

I've replaced my dead ASA5505 with a 861-K9.Our ISP provides a subnet of public address /29 (wan side)  by example: 200.200.200.xxx /29,we have 3 servers (lan side) in the example 10.1.1.xxx /24 is the same case than Johnatan, the only difference are the public addresses. [URL], everything is ok when NAT via the FE4 public address, but when do the same with other public IPs doesn't work.

View 7 Replies View Related

Cisco WAN :: ASA5505 - Getting Multiple Public IPs?

Sep 20, 2011

For a branch office we have an ASA5505 connected to the ISP with an DHCP provided public IP "locked" to the local MAC This works ok!Now - the ISP may provide up to 5 public IP's (all DHCP assigned).Is it possible to configure 2-5 public interfaces in the ASA?? As IP's are DHCP assigned there must be something (a interface) to request the address.Would this be possible, and if so - what license would be required??NAT routing on the inside should be possible as well.

View 4 Replies View Related

Routers / Switches :: Setup Multiple Public IP's?

Apr 7, 2011

At my company, we lease 3 static public IP addresses from 1 ISP. We want to have 3 separate networks that each use one of the IP addresses. Network 1 is the computer network, network 2 is the VOIP network, and network 3 is the security camera network. I am trying to determine the best way to do this. I have come up with 2 solutions in my head, but I'm not sure if they will work or not. I would like to get some input. Solution 1:Solution 1 looks something like this. Fiber box -> Router-> 3 switches. There would be one WAN input on the router, that would have a static route to 3 different LAN ports. For example, address 24.244.208.101 would be assigned to LAN port 1, 24.244.208.102 would be assigned to LAN port 2, and 24.244.208.103 would be assigned to LAN port 3 (by assigned, I mean have a static route to it). Is there some type of router that is capable of doing this? Solution 2:Solution 2 looks something like this. Fiber box -> Switch -> 3 Routers. The ethernet cable would run from the Fiber Box to a switch, and then 3 routers would be plugged into the switch. Each router would have the Static information configured in them. Would both of these methods work? If so, which would be the best way to go?

View 2 Replies View Related

Get Multiple Public IP Address From The Modem Using Switch?

Jan 25, 2013

My ISP assigns IP's through a standard motorola cable modem via DHCP server. I can pay extra for a persistent IP which uses the MAC of my switch and assigns an IP. Is there a way to get multiple public IP address's from the modem using a switch?For example. Can I plug the modem into the switch and then plug a computer server into the switch and get an IP assigned to that servers MAC address and then also have another server attached to another port on the switch and get a different public IP for that servers MAC address?

View 7 Replies View Related

Set DMZ With Multiple Devices On A Single Public Address?

Apr 9, 2013

I have a i-ball 150M wireless-N ADSL2+ Router device in that , in the NAT tab, i have activated DMZ at my static ip with a private address 192.168.1.224 , so that that ip enabled device can be access to anywhere in public network.I want that using this single static ip , How to configure two private address devices in DMZ, so that both of ip enabled devices can be access in public network.

View 3 Replies View Related

Multiple Public IP Addresses From Different Subnets On 1 Router

Feb 20, 2012

Is it possible to have multiple public IP addresses that are from different subnets going through one router? I have been told that this is not possible with most routers and that I would have to spend a lot of money on a router to be able to do it. I am still not totally clear on what defines a subnet even after reading up on them. What I am trying to achieve:

-My office has 10 computers.

-All would be connected to one router.

-My internet service provider has provided me with 10 public IP addresses, that are all very varied (which I asked for)

View 3 Replies View Related

Cisco WAN :: Multiple Public IP Addresses On 877W

Nov 23, 2011

I would like to configure an 877w I just bought. It's connecting to a UK ADSL2+ link.I'm a penetration tester and I want to put the Cisco router in front of my existing firewall which has an IPS on it, so that it doesn't get in the way of port scans and vulnerability scans. My ISP has issued me with 14 usable addresses a/240 subnet and basically I want to be able to use the route with just the public IP addresses. I have configured Cisco routers before, but never with this type of configuration. It's always been single public IP address  NAT'd through to one or two internal LAN's.
 
It will be nice if I could assign the wireless and fast ethernet ports to the same VLAN using the public addresses. I don't want to use DHCP I'm quite happy statically assigning IP addresses to the computers wireless and LAN interfaces. I am reasonably certain this is possible because not sure how to do it and a little busy at the moment carrying out penetration tests.

View 7 Replies View Related

Cisco Firewall :: Multiple Public IPs On ASA 5520?

Apr 28, 2013

I have ASA 5520 with Ver 8.2.Outside interface is directly connected to ISP's router(TelePacific) and is assigned one of public IP:198.24.210.226.There are two servers inside the network with the private IP's:192.168.1.20 for DB Server, and 192.168.1.91 for Web Server.I did Static NAT 198.24.210.226 to 192.168.1.20  and 198.24.210.227 to 192.168.1.91.When I access DB Server(198.24.210.226) it's working OK but when I access Web Server(198.24.210.227) there is no response at all.I checked the inside traffic, it even did not get into the firewall.Is this the problem with ISP's router?  How can we route all of our public IP's to the outside interface(198.24.210.226)?

interface GigabitEthernet0/1nameif insideip address 192.168.1.1 255.255.255.0security-level 100no shutdown
interface GigabitEthernet0/0nameif outsideip address 198.24.210.226

[Code].....

View 9 Replies View Related

Cisco Firewall :: ASA5505 Multiple Public IP NAT

Mar 9, 2013

I have three public IP:s from /24 network like 83.x.x.10, 83.x.x.25 and 83.x.x.41 all using netmask 255.255.255.0.

I'm using 83.x.x.10 on ASA outside interface and trying to do static nat for inside servers with those other IP:s, but not yet solved it.
 
Using Cisco ASA 5505 software v9.02
 
Config:
object network obj_guest
nat (guest,outside) dynamic interface
object network obj_any
nat (inside,outside) dynamic interface
object network w2008
host 192.168.1.10

[code]....

This works other networks that are like whole network with /29 mask and have router in front of ASA using bridge. But in my case i just have DSL modem bridged in front of ASA. This static nat works like should if i use like Zywall USG series fw and this same configuration works in my customers, but they have those scenarios i said having mask /29 and router in front...
 
It seems that the problem is in ASA, like i won't show those public IP:s to public router from my operator. Because if i roll those other public IP:s on my ASA:s outside interface: i will use 83.x.x.25 and 83.x.x.41 on outside interface and after that put back my original 83.x.x.10 then my static nat is working just fine, atleast few hours, but not in next morning because ISP router flushes ARP cache.

View 4 Replies View Related

Cisco Firewall :: ASA 5520 / Outside With Multiple IP Public?

Oct 16, 2012

I have ASA 5520 with Version 8.2(5), the ISP give me a block of IP pubic (201.148.156.193/28), one IP valid (201.148.156.194) have the Global NAT (all users LAN) and server FTP, but i need that IP 201.148.156.195 is used for VCSe, and the IP 201.148.156.196 is used for other server FTP.

View 5 Replies View Related

Cisco Routers :: RV220W - Multiple Public IPs?

Jan 29, 2013

I am configuring this new router for a client. I am running into an issue that I cannot get working. They use 5 public IP addresses. Currently the wan port on the router is .66 and I have all the ports forwarded to the correct internal IPs. This works fine. However I need to forward parts from other public IPs (ex: .67) to internal IPs. So far I have been able to accomplish this via the One to One NAT feature. It allows me to forward ONE port from a public IP to a private IP. However I need to forward 3 or 4 ports per public IP to a single internal address. Does this router not support that functionality?

View 2 Replies View Related

Cisco Firewall :: ASA 5505 - Multiple Public IP

Sep 10, 2011

Attached is my updated ASA 5505 (8.4[2]) config. With this config, basically the "laptop" group works fine, but the leo and orion groups don't ever receive packets inbound.  No DNS, nothing.
 
The laptop is windows, the other two are servers with two NICs.  The interface cards are Intel Pro/1000s.   I've been through everything including Vlan protocol conflicts and actually enabled the servers for 802.1(Q).

View 19 Replies View Related

Cisco Routers :: RVS4000 One-to-One NAT / Multiple Public IP Addresses

Mar 11, 2013

If there are any small business routers that offer one-to-one NAT? I have several public IP addresses assigned to me by CenturyLink. I have two servers that provide email and web hosting for two different domains. I want to put the client machines on one VLAN (VLAN Z) and assign it a public IP address (to keep server traffic separate). I want to put each server on its own VLAN (VLANs X & Y) and assign each server its own public IP address. I need the router to be able to provide a firewall and port forwarding for each VLAN. I also need to be able to route traffic between VLANs so the clients on VLAN Z can access their email and the websites on VLANs X and Y. I also need to be able to route DNS traffic between VLANs so each server can provide name resolution for their respective domains.
 
So, is this possible with a small business router or do I need to look at something different? I'm fairly certain this configuration is not possible with my current Cisco RVS4000. What it boils down to is I need a router that is capable of having multiple public IP addresses on the same interface and to forward those public addresses to private VLAN subnets. This would be one-to-one NAT if I understand it correctly..

View 5 Replies View Related

Cisco Routers :: RVS4000 - Multiple Public IP Addresses Go Into LAN

Aug 22, 2012

The client has a Cisco RVS4000. There are 3 Internet devices need to be accessed from the outside and will use one public IP for one device. I don't see any options to setup on Cisco RVS4000 to do 3 NATs. If Cisco RVS4000 doesn't work in this situation, which router will do?

View 1 Replies View Related

Cisco Firewall :: Multiple Public IP Addresses On ASA 5505?

Sep 8, 2011

Is it possible to two or more public IP Addresses bound to a Cisco ASA 5505 running 8.4(2).

View 9 Replies View Related

Route Connections For Multiple NICs Setup?

Feb 27, 2013

I have the setup as following on my PC:

[code]...

I use the fibre internet for almost all internet activities since the speed is fast.However, when I do school's stuff, I need to VNC to my lab's server. Hence I need to connect to school internet point. External IP cannot directly connects to my school's server.Therefore, I would need to force Windows (or VNC) to use the connection of the Wireless Ethernet card when I VNC to my lab's server. But I want to use my fibre for all other internet activities.

View 4 Replies View Related

Netgear FVX538 / Setup Multiple Public IP Addresses In Network

Aug 9, 2011

I have a Netgear ProSafe VPN Firewall FVX538. But I also have 10 Public IP Addresses that I will like to setup for three web services. So how do I set this up. With multiple routers. Or can my Netgear FVX538 take multiple Public IP Addresses to the same ports. If not how can setup multiple routers. one being the main one.

View 1 Replies View Related

Cisco Routers :: Does RSV4000 Support Multiple Public IP Addresses

Aug 3, 2011

I have a customer that has an RSV4000 Router. The customer has also purchased a block of 5 usable public IP addresses. I need to be able to assign these public IP addresses to printers either by configuring a static IP on each printer directly or thru IP mapping or some other method. Does the RSV4000 support using multiple public IP addresses and if so what configuration is needed in the router for the printers to be seen by the outside world.

View 2 Replies View Related

Cisco Firewall :: ASA 5510 - How To Assign Multiple Public IP Addresses

Dec 2, 2010

I'm currently replacing my ASA 5505 with a 5510. I have a range of public IP addresses, one has been assigned to the outside interface by the setup wizard (e.g. 123.123.123.124 ) and another I would like to NAT to an internal server (e.g 192.168.0.3 > 123.123.123.125). On my asa 5505 this seemed fairly straigh forward, i.e. create an incoming access rule that allowed SMTP to 123.123.123.125 and then create a static nat to translate 192.168.0.3 to 123.123.123.125. Since I've tried to do the same on the 5510 traffic is not passing through so I'm assuming that the use of additional public IP addresses is not handled in the same way as the 5505? I also see that by default on the 5505, 2 VLANs are created, one for the inside and one for the outside, where as this is not the case on the 5510. Is the problem that VLANs or sub-interfaces need to be created first?  I'm doing the config via ASDM.
 
Everything else seems to OK i.e. access to ASDM via 123.123.123.124, outbound PAT and the site-to-site VPN.

View 15 Replies View Related

Cisco Firewall :: Multiple Route Commands On ASA 5505?

Jan 7, 2013

I want to know with an ASA 5505 w/ Security Plus License I get up to 20 VLANS/Named Interfaces.I have a customer that is getting a new subnet of external IP addresses from their service provider and a different default gateway to accomodate re-hosting their datacenter at their main office instead of at a Colo. My question, when building out their new DMZ, can I have multiple route 0.0.0.0 commands?
 
Example.
 
Current Default Gateway 1.1.1.X
 
Internal hosts 192.168.1.0 use and are natted to 1.1.1.X
 
New Default Gateway for DMZ Servers 2.2.2.x
 
Internal hosts still use 1.1.1.X, but server hosts in 192.168.1.3 should use 2.2.2.X -- there are also a bunch of pre-existing static NAT rules for these servers such as 2.2.2.30 translates to 192.168.1.30.
 
I think I would accomplish this by using the following:
 
route inside 0.0.0.0 0.0.0.0 1.1.1.X
route DMZ 0.0.0.0 0.0.0.0 2.2.2.x
 
Would this be correct?

View 2 Replies View Related

Cisco Firewall :: ASA 5505 8.4(1) - Map Multiple Inside Hosts Ports To One Public IP?

Jun 22, 2011

I'm stuck at asa 5505 nat, port forwarding configuration Here is what i need:

host1: 192.168.1.1 service tcp/100 >>>>> public ip 1.1.1.1 service tcp/100
host2: 192.168.1.2 service tcp/200 >>>>> public ip 1.1.1.1 service tcp/200
host3: 192.168.1.3 service tcp/300 >>>>> public ip 1.1.1.1 service tcp/300
 
So people from remote just need to use 1.1.1.1 public ip to access all the ports on three different inside server.I can do this on my old ASA 5505 with 8.0(4). Looks like there're lots of change from 8.0 to 8.4.

View 7 Replies View Related

Cisco Switching/Routing :: 4507 Not Able To Route Multiple Ip Ranges

Apr 24, 2012

I have this cisco 4507 switch that I need to configure multiple ip ranges on. The problem is that I can only configure two ip ranges on it, one ip range on the management vlan and the other ip range on vlan 2. After I have configured these 2 vlans with different ip ranges, I can route between then and get them to talk to each other, but that is all I can do. If I add another vlan with a different IP range I cannot see it from the switch or get any of the otehr ip ranges to see it.
 
I am doing something dumb because this is a layer 4 device so it should be able to route the ip ranges. I have tried everything just cannot get it to work. I have assigned the IP range directly to the port number and directly to the vlans. Just wont work.

View 6 Replies View Related

Cisco Firewall :: ASA 5510 - Multiple Static Route Tracking

May 15, 2013

I am trying to set up my ASA5510 the fail over of ISP when it can't ping three different IP. I create three different tracking to three different IP using sla monitor & track rtr. But when I do

   route isp2  0 0  yy.yy.yy.yy  50
   route isp1  0 0  xx.xx.xx.xx  31  track 1
   route isp1  0 0  xx.xx.xx.xx  32  track 2
   route isp1  0 0  xx.xx.xx.xx  33  track 3

the last route will replace the previous two and only the last route command takes effect.Is there anyway I can set up the fail over to ISP2 only when it can't ping three different IP from ISP1?

View 1 Replies View Related

Linksys Wireless Router :: Wrt160n Can Access Work Network From Multiple Public Locations From IPad

May 17, 2010

home router is a wrt160n v3 With my iPad I set up the built in IPSec VPN to my office's cisco gateway. I successfully get the VPN logo. With an RDP app, i can access my work network from multiple public locations from my iPad. At home, on my laptop, I start the cisco client then use the windows rdp, presto i'm in my work network. At home on my iPad I can activate the VPN, but I can not connect with rdp. I spoke with linksys support tonight they had me add port 3389 to port range triggering and disable the firewall on the home router. This didn't solve the problem. To recap: 1) I can connect to my work network with rdp from multiple public locations, but not at home with the iPad 2) I can connect to my work network at home with my laptop with the cisco client ant the windows rdp

View 6 Replies View Related

Cisco Application :: ACE 4710 Server In Multiple Server Farms

Jul 23, 2012

I put multiple rservers in multiple server farms?
 
So for example rserver1 and rserver2 are put in serverfarm production1 and are in use with particular sticky and load balancing settings.
 
Can I then create serverfarm test_production and put both rserver1 and rserver2 in it?  Then play around with the sticky and load balancing settings as a test without affecting the production serverfarm.  

View 1 Replies View Related

Port Through Public IP To Free NAS Server?

Feb 16, 2012

I have a virtual FreeNAS server running from VMPlayer and I want to allow my friends to connect to my media server from their houses, but I don't want to buy a domain. Is there a way to port them to it when they connect to my Public IP? I am willing to use another program if necessary. I have looked at Filezilla, but have the same issue.

View 4 Replies View Related

Cisco WAN :: 1841 / Use 1 NAT Public IP For Server?

Nov 9, 2012

I got 1 public IP for router and 16 Public IP's for NAT from ISP. Both router IP in one range and the NAT IP's are in different range. I want to use 1 NAT public IP for one of my windows server.Am using cisco 1841 router, in which I ve configured the public IP provided by the ISP for router.

View 10 Replies View Related

Linux Server With Two Static Ip - Public / Private

Dec 14, 2011

Is there a simple way to have a web server have both a static public ip (I have a block of static IP's) and an static private ip (ex 192.168.0.60)? I am running a web project management application....

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved