Route Connections For Multiple NICs Setup?
Feb 27, 2013
I have the setup as following on my PC:
[code]...
I use the fibre internet for almost all internet activities since the speed is fast.However, when I do school's stuff, I need to VNC to my lab's server. Hence I need to connect to school internet point. External IP cannot directly connects to my school's server.Therefore, I would need to force Windows (or VNC) to use the connection of the Wireless Ethernet card when I VNC to my lab's server. But I want to use my fibre for all other internet activities.
View 4 Replies
ADVERTISEMENT
Jul 16, 2011
I have to connect/switch to two different ips different gateways, can I possibly keep two set of ips always ready.
View 1 Replies
View Related
Feb 20, 2012
i have a windows 2003 server using it as a proxy server with 2 nics. 192.xxx.xxx.xxx to the LAN and 172.xxx.xxx.xxx to the internet router. although I can browse on the LAN, i cannot ping any public ip. because of that i cannot use my outlook to get my mail.
View 1 Replies
View Related
Jun 30, 2011
I have 2 NICs in my Windows 7 PC at work.NIC #1 connects to our private network and is also how I connect to the internet. NIC #2 connects to our customer's network and does not allow internet connectivity for me.When I first boot up my Windows 7 machine I get the following info in route print:Despite the fact that I have a persistent route with metric 1 to send my internet traffic to the 172 subnet, the internet requests go to the 10 subnet. I am guessing that is because the non-persistent route to the 10 subnet has a metric of 20 vs. the 21 for the 172 subnet. I delete the route 0.0.0.0 mask 0.0.0.0 10.242.1.254 and I am able to connect to the internet again.HOWEVER, after something like 4-6 hours, (without rebooting) the bad route automatically reappears in my route table! I become aware of it because I suddenly have connectivity problems. There are no entries in the Windows Logs that seem to be related (i.e., no DHCP renewal requests.) so I do not know how or why it reappears.
View 1 Replies
View Related
Apr 22, 2012
I have two NICs and two seperated network connections on Windows Vista System. I want all visits to websites that are blocked by our Corporation LAN go to the external network, so I can use my personal emails etc.All the other applications still use corporation LAN.
1) Corporation LAN subnet: (Connection 1 - DHCP)
IP: 142.241.X.X
Subnet: 255.255.255.0
Gateway: 142.241.X.X
2) External network LAN subnet: (Connection 2 - DHCP)
IP: 192.168.1.X
Subnet: 255.255.255.0
Gateway: 192.168.1.1
View 2 Replies
View Related
Mar 29, 2012
I have a Cisco 2851 (with a 4 port switch module) that I am trying to set up with two different internet connections, and have it route traffic out to them based on the source IP. One connection is a 50mb Comcast connection, another is our T1 that our servers are hosted on. The goal is to guide server/phone system traffic to the T1 and have the rest default to the Comcast. I currently have the 2851 connected to our Layer 3 switch (Dell Powerconnect 6224) with a subnet created between them. Static routes have been created on the 2851 back to all of our existing subnets. Traffic flows internally without a problem between the subnets and 2851 (and vice versa). I set up the 2851 with route-map's in the NAT to control the flow of traffic, with the default route set to the Comcast connection. Default route works great, speedtest shows full speeds and everything looks great. The problem happens when I apply my route-map policy to the internal LAN interface with the ACL list of IP's that I want to guide to the T1 (with a next-hop of the T1's IP address). I tested some tracert's and pings from one of the IP's in this list and they would stop at the T1 modem and not go any further. I did a "show ip nat translations" and noticed that the "outside" portion (right half) was blank for every IP that was in the ACL or related to the T1. So my guess is it looks like this is not doing NAT for the T1? I double-checked that I had my "ip nat inside" on the LAN interface and "ip nat ouside" on the T1 VLAN interface and Comcast interface and they were there.
View 6 Replies
View Related
Jul 19, 2012
We are planning 3 Internet Connections into our building. 1 will be for actual Internet traffic, 2nd for Voip phone system, and 3rd for internal network for Active Directory...etc. Oh the AD servers are controlled by another business so technically this line is still considered and outside line and is a T1. What I need to know is how best to make this all work so that our internet phones use the VOIP system, computers can log into the domain and access that network but use the Internet network for actual internet traffic? We were considering a series of managed switches and creating 3 VLAN's but I'm thinking we instead need a new router that all 3 networks connect to and dishes out DHCP to computers and phonesn example network is below.192.168.1.x ----> Internet (all computers use for internet traffic)72.10.10.x ----> VOIP (All physical and software phones use this network)10.10.10.x -----> Connection to external company that controls our network and has domain controllers, mainframe...etc.
View 2 Replies
View Related
Jan 3, 2013
How to configure my DIR-615 (Hardware Version E1 - Firmware Version 5.00NA) to:
1. Assign/Reserve IP address for 2 machines.
2. Route a web browser to a server on the first machine (port 80) as a default when another computer or smart-phone or device joins my open wireless network.
I am hoping to eliminate any changes to the IP address of the first two computers so that the server's IP address and port are static. I would also like anyone who joins the network to merely open their browser and be presented with the http interface from my server.
View 2 Replies
View Related
Jan 17, 2012
we need to implement a scalable solution where we can provide for each customer it's own public IP so that they can access some content restricted by IP range.the solution consists of a proxy software that will "listen" to multiple IP's, then reroute the HTTP requests and rewrite the URL's to a different format.Anyways, we came to the conclusion that what we need is the following:
- broadband line with a pool of 8 IP's
- a router that can support multiple IP's
- a server
what kind of router or device is required for this kind of configuration. basically the network diagram will be like this:
Internet ----> broadband -------> cable modem ------ > multiple static IP router -------> server NIC
we should be able to add the same above combination once we run out of IP's, another broadband line, another device and server ...
View 3 Replies
View Related
Jan 7, 2013
I want to know with an ASA 5505 w/ Security Plus License I get up to 20 VLANS/Named Interfaces.I have a customer that is getting a new subnet of external IP addresses from their service provider and a different default gateway to accomodate re-hosting their datacenter at their main office instead of at a Colo. My question, when building out their new DMZ, can I have multiple route 0.0.0.0 commands?
Example.
Current Default Gateway 1.1.1.X
Internal hosts 192.168.1.0 use and are natted to 1.1.1.X
New Default Gateway for DMZ Servers 2.2.2.x
Internal hosts still use 1.1.1.X, but server hosts in 192.168.1.3 should use 2.2.2.X -- there are also a bunch of pre-existing static NAT rules for these servers such as 2.2.2.30 translates to 192.168.1.30.
I think I would accomplish this by using the following:
route inside 0.0.0.0 0.0.0.0 1.1.1.X
route DMZ 0.0.0.0 0.0.0.0 2.2.2.x
Would this be correct?
View 2 Replies
View Related
May 17, 2011
I am working on a project at my company. In short, there is one PC in the office to which other user must remotely connect to perform certain tasks. The stuff they do must be done from the machine with the specific IP, the IP of that machine, as this is specified in agreements with the companies we work with. So far, we have been using Remote Desktop (our machines are Windows-XP-based PC's), but this is quite annoying when more than one person needs to use the machine at the same time
View 3 Replies
View Related
Jun 7, 2011
I have a two broadband (Indian standards) connections that I want to use together. One is a 1mbps and the other is a 512kbps. The config that I have is below.
OS: Windows 7
Laptop: Acer Aspire
Router 1: Buffalo AirStation WHR-G54S
Router 2: ZyXEL P-600
I read about it on a few boards but I couldn't find any proper info on that.
View 2 Replies
View Related
Nov 14, 2012
I am trying to find out the availability of a router which will allow multiple connections, each with their own username and password and the ability for an administrator to control access.
View 2 Replies
View Related
Dec 24, 2012
i'm trying to setup multiple internet connections however the ISP i am using doesnt allow the use of NAT. DHCP and uses the registered mac address as a way to authenticate the account. To compensate for no NAT i use a web proxy feature on my router.[CODE]
View 2 Replies
View Related
Apr 24, 2012
I have this cisco 4507 switch that I need to configure multiple ip ranges on. The problem is that I can only configure two ip ranges on it, one ip range on the management vlan and the other ip range on vlan 2. After I have configured these 2 vlans with different ip ranges, I can route between then and get them to talk to each other, but that is all I can do. If I add another vlan with a different IP range I cannot see it from the switch or get any of the otehr ip ranges to see it.
I am doing something dumb because this is a layer 4 device so it should be able to route the ip ranges. I have tried everything just cannot get it to work. I have assigned the IP range directly to the port number and directly to the vlans. Just wont work.
View 6 Replies
View Related
May 15, 2013
I am trying to set up my ASA5510 the fail over of ISP when it can't ping three different IP. I create three different tracking to three different IP using sla monitor & track rtr. But when I do
route isp2 0 0 yy.yy.yy.yy 50
route isp1 0 0 xx.xx.xx.xx 31 track 1
route isp1 0 0 xx.xx.xx.xx 32 track 2
route isp1 0 0 xx.xx.xx.xx 33 track 3
the last route will replace the previous two and only the last route command takes effect.Is there anyway I can set up the fail over to ISP2 only when it can't ping three different IP from ISP1?
View 1 Replies
View Related
Feb 19, 2013
The ethernet ports across the entire campus including the halls all host multiple networks via one port. I connect to the port and I get one connection, and my friend connects to get a second connection through the same port, and a third person connected via the same port to get yet another connection. I think there may be 4 connections being hosted through this in total. Now, the university have 3 main streams of internet: 1 for Staff/postgrad, 1 for students, 1 for exchange students. The fourth connection type is intranet with only access to a portal. The purpose of the portal is to submit your mac address for wireless and ethernet to be assigned an IP address for both. The issue we are having is my friend needs to connect to the exchange students connection for actual internet access, but the ethernet cable will only connect her to the portal (all her details have been submitted). I have cycled through every window in the networking control panel and usually issues like this I can resolve within a couple of hours but how to identify other networks that are available through ethernet.
View 3 Replies
View Related
Aug 6, 2012
I have laptop with windows 7 ultimate.i have two internet connection avalable...
1> wifi network of my office...which is protected by cyberom..so i cant open facebook and other restricted sites
2> internet through my android mobile...which is dialup connection or through usb tethering
i want to use office wifi for downloading via idm or other download manager and my mobile internet for social networking..or any idea i allow application to connect internet via perticuler network/way..
View 5 Replies
View Related
Nov 6, 2011
When I connect 2 laptops to my router, why does the speed/connection get split? I would understand that if the speed was maxed out or something but it's a lame 500 kb/s connection. Do all wify routers behave this way? It's kind of annoying since there's a trafic quota limit implemented and when someone downloads, the other one can't do s^&t? how to handle this?
View 8 Replies
View Related
Mar 22, 2011
I am using Cisco VPN client for windows 4.0.5 (C)I use the VPN client to connect to my office from home and to connect to a customer via their VPN connection.Is there any way that I can have these two VPN clients active at the same time instead of needing to diconnect one to connect the other ?
View 1 Replies
View Related
Nov 9, 2011
what I want to do is setup a Tablet for use and share my one Internet connection with it and my desktop. I do not want the desktop and the Tablet networked with each other. there is a Tablet on Newegg: Velocity Micro Cruz Reader R103. the details say it's communication is 802.11b/g Wireless LAN. so I copy and paste that on Newegg and get: D-Link DIR-601 Wireless Broadband Router. not sure if that's what i need or what the configuration would be but I kind of know how to set it up.my question is can I connect a Desktop and a Tablet or any PC device to a router like this with out networking the individual units with each other? just to where it serves as more a splitter. is there any wireless alternatives to only "split" the Internet connection and not network the desktop and Tablet?
View 3 Replies
View Related
Mar 16, 2011
which product has the capability to receive multiple incoming connections
View 1 Replies
View Related
May 1, 2012
I have a belkin router that I've been using to share internet connectivity with several devices around my home. It has happily supplied this to an Ethernet connected desktop, Ethernet connected Blu-ray player, and wireless connections to two seperate laptop computers. When I try to add one more Ethernet (wired) connection to the mix, I always run into problems. Although the router has 4 outgoing Ethernet ports, it doesn't like to do more than two. Should I buy a new router? Cables?
View 4 Replies
View Related
Apr 8, 2013
Currently I have my SG300 connected to a Wireless Router which is, in turn, connected to a Cable Modem.
I'm considering adding a second cable modem. Can the SG300 handle that?
View 3 Replies
View Related
Jun 20, 2012
We are about to install a cisco 2911 router to replace a linux based router.
The Cisco will have 5 gig ports, 4 ports connected to DSL modems each modem connected to a different ISP, and the last port connected to a Cisco LAN switch.
802.1q will be used on the internal router port to split the LAN segments up into VLAN's as the building contains lots of different businesses.
Each customer in the building has there own servers and set of public IP addresses assigned e.g
Customer A - ISP 1 uses 81.34.65.78 NAT'd to 10.0.0.1 Vlan 5 port 25 (SMTP)
Customer B - ISP 2 uses 217.23.67.87 NAT'd to 192.168.1.1 Vlan 6 port 25 (SMTP)
and so on
The outbound traffic also needs to go out of the correct DSL line which ever has been assigned to that customer.
Am i right in thinking the only way to do this will be to use "Route Maps" ??
(IP addresses above are made up, or at least not ours)
View 17 Replies
View Related
Nov 1, 2011
Everytime I disable SSID Broadcasting 2 extra wireless connections appear available connections list. (See wirelessconnections.jpg) One is blank and one is labeled Other Network. They disappear when I enable SSID Broadcasting. I am not sure why this is happening.
View 5 Replies
View Related
Oct 17, 2012
We have a ZyXEL (P-2601HN-F1) router and three computers in our house. Currently, we only use cables to connect to the router because we haven't been bothered to setup wireless. However, there's a curious problem where the moment we connect more than 2 devices at a time, the router loses connection to the internet. To be precise, all LEDs are on, except wireless (d'uh) and Internet.
All involved computers run Win7.
View 1 Replies
View Related
Jul 13, 2011
Is there any way to make it so that my computer has two internet connections, so to my router it looks my computer is two separate computers, and would this increase my speed, since my router is made for up to 15 connections and has only 300mb/s to give out, so [would]each computer is[be] only limited to 20mb/s? As of now I have a dlink xtreme-n DWA-552 adapter in my computer.
View 2 Replies
View Related
Jan 26, 2011
do not have fast internet service so we must need to combine two or more different internet providers and get one speed kindly reply do you know any router/modem/switch which can do this for us.
View 2 Replies
View Related
Jun 17, 2012
How to make 2 (or more) connections work together and increase your final download and upload.You will need the following items
- A PC or server connected at high speed that is greater or equal to both connections speed (from a data center, You can get some very cheap $30 a month, a VPS can be good enough)
- 2 Internet connections at your home (DSL + cable for example)
- A router that supports dual WAN
- A Magic software that I can write for example
So what is needed is a way to split your data using some technology like the concept of RAID 0 (MAGIC software will be here used) and then use both IPs through the router to send the data to the server which will handle your request (it is possible to have a good usage of VPN here to forward all your traffic to the server without worrying about doing much work here). After that on the server you can reverse your RAID 0 data (using the same MAGIC software) and forward your request to the destination site that you want to visit. Same way the downloading will happen when the server receives a reply from the destination site, it will split the data using same RAID 0 technology (using the MAGIC software) and then send the data to both of your IPs. After that on your side you combine the received data (using the software) and you are done. Of course I do prefer the data splitting to happen using some hardware like a router with MAGIC software as it will be much more effective.
View 3 Replies
View Related
Jan 19, 2013
We have a network, with a MAC filter for the internet acces. Every body can just have one MAC adress entry on their name for internet acces . My idea was to give the MAC adress of another router(that i can control), plug the LAN cable in the WAN of the second router, and then connect more computers to that router. Would that enable Internet acces for all the computers behind the 2 router?would it work if i make one computer with an extra network card, register that computers MAC adress and forward internet by the second network card to a router or other computer?
View 7 Replies
View Related
Apr 27, 2011
setting up a simple internet plan for a place, but a LAN center needs crazy fast internet, faster than most large enterprise class offices that take up an entire floor or two. Otherwise there is too much lag in games like first person shooters. We are expecting to have 60 computers, plus people bringing their own gaming rigs from home and laptops as well, xbox, ps3 and other consoles, all accessing the internet at the same time to varying degrees, with no room for lag. There is a LAN center in california that has 200 or more computers and they pay for 9 t3 lines, which is thousands and thousands of dollars per month. Plus the initial equipment to set that up from what I can find on cdw is many thousands of dollars also. Something like 10,000 for a router with 4 expansion bays, and 4000-6000 dollars for a t3 expansion card, bringing the total to around 22-28,000 for equipment to do just 4 t3's. Plus the monthly cost. Since we don't need all of the traffic to be secured like a high end business class line like a t3, I was considering what it would be like, and how one would set up, having multiple cable internet lines coming in. They make cable wic cards for cisco routers. 4, 50meg cable lines would give us 200 down and 40 up but I don't know how to make that work without having multiple public ip's. I was thinking that if I did have multiple public ip's on the network I could just divide the computers up so that they are in groups, using all of the public ip addresses for gateways, so that the load is split pretty evenly, but still, there should be a more seamless way to do this, I just don't know what it is. At the rate for business cable internet, 4 lines would probably only cost around 700 dollars a month, which is much better than probably 5 grand a month for several t3 lines.
View 3 Replies
View Related
Aug 29, 2012
There is a 6500 switch with fwsm. We have extended 2 vlans from the ISP into the FWSM. Also there are atleast 10 other vlans for our internal network. We would like say half of the internal vlans to go out of the 1st ISP vlan and the remaining half from the 2nd ISP vlan. Is there a way we can do this in the FWSM?
View 2 Replies
View Related
