Linksys Wireless Router :: Wrt160n Can Access Work Network From Multiple Public Locations From IPad
May 17, 2010
home router is a wrt160n v3 With my iPad I set up the built in IPSec VPN to my office's cisco gateway. I successfully get the VPN logo. With an RDP app, i can access my work network from multiple public locations from my iPad. At home, on my laptop, I start the cisco client then use the windows rdp, presto i'm in my work network. At home on my iPad I can activate the VPN, but I can not connect with rdp. I spoke with linksys support tonight they had me add port 3389 to port range triggering and disable the firewall on the home router. This didn't solve the problem. To recap: 1) I can connect to my work network with rdp from multiple public locations, but not at home with the iPad 2) I can connect to my work network at home with my laptop with the cisco client ant the windows rdp
View 6 Replies
ADVERTISEMENT
Nov 10, 2011
I am cascading a wrt160n (R1) and a wrt160nl (R2) which are hooked up LAN port to LAN port (via a DLink power line adapter). R1 is hooked up via dhcp to the internet. The whole system works wonderfully for several hours until all of a sudden wireless access to R2 ceases to work (though I still can access everything wired). [code]
View 4 Replies
View Related
Feb 23, 2012
How do I connect IPAD to Linksys router WRT160n?
View 2 Replies
View Related
Dec 11, 2012
I am trying to use the directv ipad app to watch/control my directv service. I am not able to see the DVR that is on my system. It is plugged directly into the router and the other receivers (and ipad) are wireless connecting through the same router.Direct TV says:
"For added security, some brands of routers treat Wi-Fi as separate from an Ethernet cable connection within the same router. If your HD DVR is connected to the router by Ethernet cable, and the iPad to the router via Wi-Fi, they may not see each other. Check your router manual as you may need to configure your setup."Can someone tell me if the WRT160N considers them as two separate networks when connected via wireless vs plugged in?
View 3 Replies
View Related
Apr 14, 2011
I want to create a home network to share all my files across my three computers.. two pc, 1 mac laptop.They are currently all connecting wirelessly to my single router (linksys WRT160n flashed with DD-WRT). When I try to share the drives.. I notice they are all connected to separate duplicate network names ... such as NetworkName1, NetworkName2, NetworkName3 (even when they all connect to same SSID). get them all connect one network NetworkName so I can share folders across?
View 5 Replies
View Related
Feb 11, 2011
setting up networks with multiple locations and multiple wireless points.For example: My sisters' home has here modem in her main computer room, it has a Belkin router hooked to the modem. Then a line goes from there to my nephew's room where I tried to expand their network by adding another router. I really just wanted an access point, but they don't seem to sell these as much as they used to. Anyway, I had it working, but it was two different networks, NETWORK1 and NETWORK2. So they had to swap networks when moving around the house. what would be the best hardware setup to provide both sides of the house with some Hardwired access as well as wifi access? Right now, we have two routers, a DIR615 (or something like that) and a Cisco E1000, and again hardwire going from the main computer room to my nephew's room.Also, in my house, I have lots of stuff... I have an Actiontec Router from FIOS, feeding a small hub as well as a switch in my main room. Which then feeds a Ps3, Wii, laptop, Denon reciever, and Access Point... and also feeds my Apple TimeCapsule, which also feeds my printer. My wireless devices range from cameras, iphones/ipads, and a wifi unit (I forget what it's called, but it connects my DVR wirelessly to my network, and the DVR itself doesn't have wifi).
my question about my setup is, should everything be on one network... as in let the ActionTec handle most of the duties and use switchers and accesspoints to extend the network. Should everything be on the same wireless network and channels? Like if I used my access point to extend, do I want the same settings as my main wireless router, and would that be the same for the Apple Airport Extreme?Also, does having all these wireless networks going create any kind of hinderance on my performance. For example, the PS3 has some sort of wifi in it... it produces a SSID, but I never connect to it. Should I make sure that's off? And in my main room, should I go with just the AirPort extreme over using it and the Wireless Access point.
View 1 Replies
View Related
Apr 4, 2013
My WRT54GS works fine with my wireless computer. I just tried using the router to work my wireless IPad and it wont work. The WiFI sees the router, and when I type in the router password, Linksys shows on the WiFi , but it won't download it and show a wireless icon, or let me go online. I looked in the router information and it said my version is v.1.50.9
ON the router, after the model number says ver.6. I see a 6 for downloading a firmware upgrade, but no 1.50. Any solution other than having to buy a new router?
View 1 Replies
View Related
Feb 7, 2011
I've worked on it and read on it for almost 2 days and I'm stuck. I'm using a Win 7 Pro desktop that is hardwired and a Win 7 Home Premium laptop wireless. Both current on all updates.
My Comcast modem is hooked into a WRT160N that is hardwired to the desktop PC and to a WRT400N which is being used as an access point. Both routers have the latest firmware. Both routers have the same SSID, security and password but use different channels. (2 & 6) Internet works perfect both wired and wireless through both routers.
The homegroup has been set up through the desktop but I've removed and added homegroups on both machines multiple times. My problem doesn't go away. The homegroup works when the laptop is either wired or wireless using the WRT160N. It will not work at all through the WRT400N. I can be in the room with the WRT160N hooked to the homegroup, when I move to the other router so the wireless switches to the WRT400N, it drops the homegroup. The internet stays connected just fine as I move back in forth so the IDs and security has to be correct. Once the laptop drops the homegroup, it can't find it until I go back and connect to the main router.
Both machines have IPv6 addresses, auto discovery is on.
I also have an XP machine hooked to the main router. The desktop can see it but it also is invisible to anything using the WRT400N router. I also made sure all PCs are using the same Network ID with no password.
It seems to me that neither Homegroup or Home Network are passing between the two routers since everything works fine using just one router.
View 4 Replies
View Related
Oct 9, 2012
As of last night my router has been producing slow connectivity when multiple users are connected to it, but it's perfectly fine when only one user is connected. I am on a laptop myself, but we also have a second laptop and a desktop where the modem and router are set up. I have upgraded the firmware so that is up to date. We have Comcast Fiber Optics so my internet speed is normally quite fast even when all of my computers are connected.
I am using DHCP Configuration. My Channel Width is set to 20 MHz and I am using Channel 11. The Security Mode is set to WPA Personal. I had it on WPA2 Personal but I read that changing to WPA Personal might work and so far it doesn't seem to have done anything. I set the Beacon Interval to 50, Fragmentation Threshold to 2304, and RTS Threshold to 2304. Everything else is set to the default factory configuration.
Just today I received a notice that said "Windows has detected an IP Address Conflict", but ever since I reinstalled the Firmware it hasn't come back. I've rebooted both my laptop and the desktop to confirm it hasn't come back as well. I've tried everything that I could think of including reconfiguring my router and restarting my modem as well.
View 6 Replies
View Related
Oct 19, 2012
i have a WRT160N V3 and DMZ or Portforwarding dont work.i tried locally following
WAN_PC-> WAN-PORT -> WRT160N V3 -> LOCAL-PORT -> LOCAL_PC
The WAN_PC has a Static-IP 192.168.1.2, Subnet 255.255.255.0
The WAN-PORT has a Static-IP 192.168.1.1, Subnet 255.255.255.0
ON the WRT160N V3 i configured a DMZ on 192.168.0.100.and Disabled the Firewall.
On the LOCAL_PC (192.168.0.100:8888) is a Apache
So when i type 192.168.1.1:8888 on the WAN_PC i get NOOO Website from the Apache on 192.168.0.100:8888?
View 2 Replies
View Related
Jul 11, 2011
Will the WRT160N work with the WAP4410N range booster? Will it power the booster over ethernet cable? my location has several concrete walls and the signal from the router is blocked. Will the WAP4410N work better in this environment?
View 1 Replies
View Related
Mar 22, 2013
I have a FIOS setup with their Router/modem providing DHCP and Wireless routing. The problem I have is that I have a mix of older equipment and newer equipment. The newer equipment is capable of supporting WPA2, the older is not. I would like the benefits of WPA2, but still would like to at times be able to use the older equipment.My solution was to use a WRT160N v2 router that I had as an access point and it also gives me switch capabilities for wired systems as the FIOS router in on a different floor than the Linksys router. Wired access works just fine and the wireless worked fine until just recently.Since both routers have the same default IP addresses I changed the Linksys to a different static IP and turned off DHCP. I left all of the other defaults the same. I set up the Linksys for WEP and created the key for security. Everything worked fine for the better part of a year, but recently I am having problems where some of the computers cannot find the network or find it then lose connection.
View 9 Replies
View Related
Mar 23, 2010
Even when I disable remote access, people still can get to my router login by typing my external IP. Is there anything I can do to stop this?
View 5 Replies
View Related
Jul 28, 2011
I have a Router WRT160N and need to connect an Access Point using a wireless bridge (i.e. cannot use cable between router and AP). Which Linksys Access Point model is recommended to use with this router?(No I dont want to use another WRT160N with DD-WRT!)
View 1 Replies
View Related
Dec 25, 2011
While trying to add my kindle fire (unsuccessfully) I lost all internet connections, now my laptop won't connect. I reset the router and and can see my wi-fi account but when I try to use on my PC and laptop it won't recognize it.
View 3 Replies
View Related
Aug 3, 2011
I have a WRT 160n I want to use as an access point. The cable company has provided the main router so I want to use the 160 as the access point. I have a switch attached to the router and have the 160 attached to the switch. I can ping and access the 160, however there signal strength has not changed and is still extremely low. I know that the strength on the router is very good when I plug it in to the cable modem.
View 1 Replies
View Related
Sep 16, 2012
I have Linksys router model no. WRT160N, which I have been using for three years. I need to add two iPads to my router but I do not know the network password. I am trying to access the router IP address 192.168.0.1 to find out the network password, but when I put HTTP://192.168.0.1 in my browser, I receive the message: Internet Explorer cannot display the webpage. How can I find out the network password?
View 9 Replies
View Related
Nov 12, 2011
We have a brand new Dell Insprion Q15R laptop which works fine apart from the fact that certain websites hang when we try to log on at home using our edimax router and we cant get into them. Other websites work fine. Also we have an old IBM laptop where all websites work fine. Its just the Dell that is playing up on certain sites. However if we go to somebody else's house and log on using their internet connection and router the websites in question work fine on the Dell.
Examples of the websites that we cant access at home and just hang are : argos, easyjet, national rail, expedia
View 2 Replies
View Related
Sep 19, 2011
I just bought a Linksys E4200 wireless router. I have an old Linksys WRT160N wireless router. I would like to setup the WRT160N downstairs to wire the DirecTv box and PS3 to it. Then wirelessly connect to the E4200 upstairs where our modem is connected. Can the WRT160N be used as an access point to do this or do I need other equipment?
View 1 Replies
View Related
Dec 10, 2008
I am having trouble logging in on my wireless router and when i put "admin" (WITHOUT QUOTATIONS) on the password, the same prompt kept on coming for three times and after that the message says "401 Authorization Required" (WITHOUT QUOTATIONS). I don't get though, i installed the wireless router just after i change admin and my password into (******).
View 9 Replies
View Related
Mar 21, 2013
I have a wrt160n v1 that stopped working after a power outage. The power light stays solid and I cannot reset the device with the reset button, power cycle, and I cannot access the user interface at 192.168.1.1. Is it bricked? It doesn't show up on my wireless network and when I try to access it via ethernet cable it shows up as an unidentified network with no network access
View 2 Replies
View Related
Oct 13, 2008
I got this router and I need to set it as an Access Point (will not be using the routing functionality) in the far side of our building. Our LAN uses IP address in the range 10 with subnet 255.0.0.0, so I need to put the access point ino this subnet. The drop down box only allows me to set some predefined subnet masks, none of which matches ours. So how am I supposed to set this router in our LAN?
View 9 Replies
View Related
Oct 16, 2012
I have updated the WRT160n firmware and, since then, I couldn't access the setup page anymore. I could still use the router as a switch, but couldn't access the setup page and configure it as a router.
View 5 Replies
View Related
Nov 15, 2011
Everything was going great until tonight. I can connect to the internet fine wired. Wireless devices can connect to the router, but cannot access the internet. No changes were made to the unit. Updatae firmware to 1.02.11 but that did not fix the issue.
View 1 Replies
View Related
Aug 21, 2011
How to access the media server and/or external USB drive on an E4200 from an iPad?
View 1 Replies
View Related
Nov 18, 2011
My iPad cannot connect to my network wireless through WPA2 using router E4200 the way my Macbook is connected. Only using guest access i can get internet contact. Is this a known problem with this combination and/or is it meant to be, that only guest access gives an iPad connection?
View 6 Replies
View Related
Feb 16, 2012
I was unable to access the web admin on my WRT160n v3 w/ latest firmware this morning. Reset config to defaults & was able to get in. Enabled HTTPS access & disabled HTTP access & was right back where I started; reset to defaults again & left both boxes checked. Can access via HTTP, but HTTPS requests get refused/reset.
The reason I needed access was that when I booted up my laptop this morning, my wireless card wasn't picking up an IP address via WIFI, only worked via ethernet, so I need to see what was going on there — several reboots of the router didn't fix, nor has it fixed the HTTPS access problem described above.
View 6 Replies
View Related
Jul 24, 2011
I want to use my WRT160n in my room to connect all my devices (Xbox, playstation 3, and 3 laptops) I hardwired the E3000 from the room downstairs thats connected to everything else.
View 2 Replies
View Related
Aug 20, 2012
why i can't add a new policy. I can't fillin a policyname or change the status from disable to enable. I have model V2 with firmware v2.0.03 build 007Jul 2, 2009
View 3 Replies
View Related
Aug 11, 2011
I have" a WRT160N but I guess we had a power outage while I was on vacation and now I can't connect to my old network I set up.I see the Linksys internet connection and I can connect but its not the password protected one I set up. When I go to "manage connection" I can see the old "house" connection but can't connect
View 4 Replies
View Related
Dec 27, 2012
I have just purchased a PC Tablet, but cannot add it to my network on my WRT160N Router.All I get is "Authenticating" then "Authenticating problem".
View 1 Replies
View Related
Aug 9, 2012
We have a home use WRT160N router linked to a PC desktop and two wireless laptops, Yesterday bought a new I-Phone, but could not link to my network (entered the security key many times). I accidentally connected to computer fix it firm that linked to my PC and wanted a large sum to fix the problem which he said was due to large number of temp?? internet files and once removed he would change the IP address of the desktop computer? Is this diagnosis logical and can I do it on my own. The router is definetely working - both laptops access the internet and I was recently able to hook up a Samsung Blu-Ray player using the same security code I used for the I-Phone.
View 1 Replies
View Related
Nov 18, 2012
I have a desktop running XP. I am using comcast as my ISP. I have my printer attached to my Linksys wrt160N router via Ethernet. My desktop is also attached via ethernet. I also have a laptop attached to the router via wireless. How do I access the printer via the router from either the desktop or laptop? I had it configured properly in the past then lost my motherboard. Once the PC was rebuilt, I lost access.
View 6 Replies
View Related
