Linksys Wireless Router :: WRT160n V3 Has Slow Connection When Multiple Users Are Connected
Oct 9, 2012
As of last night my router has been producing slow connectivity when multiple users are connected to it, but it's perfectly fine when only one user is connected. I am on a laptop myself, but we also have a second laptop and a desktop where the modem and router are set up. I have upgraded the firmware so that is up to date. We have Comcast Fiber Optics so my internet speed is normally quite fast even when all of my computers are connected.
I am using DHCP Configuration. My Channel Width is set to 20 MHz and I am using Channel 11. The Security Mode is set to WPA Personal. I had it on WPA2 Personal but I read that changing to WPA Personal might work and so far it doesn't seem to have done anything. I set the Beacon Interval to 50, Fragmentation Threshold to 2304, and RTS Threshold to 2304. Everything else is set to the default factory configuration.
Just today I received a notice that said "Windows has detected an IP Address Conflict", but ever since I reinstalled the Firmware it hasn't come back. I've rebooted both my laptop and the desktop to confirm it hasn't come back as well. I've tried everything that I could think of including reconfiguring my router and restarting my modem as well.
View 6 Replies
ADVERTISEMENT
Nov 29, 2011
I have a WRT160NV3. When more than 1 member of the family is using a device it gets really slow. For example, we have 3 laptops and a PS3. When the PS3 is being used for online play and someone gets online to watch videos, etc it is extremely slow. Is there an update to the router or do I need to upgrade?
View 9 Replies
View Related
Apr 10, 2012
I have speed 12M when I connect wrt160n v3 through l2tp, my speed down to 4M-5M. When i connect modem directly to computer I get speed 12M.
View 1 Replies
View Related
May 24, 2012
I upgrade the firmware to Version: v1.52.0. The connection by wired is very good, i haven't slowness in internet. But if i'am connect by wifi, the website are very slow to load, and i can't see video on youtube without waiting.
I test without configuring the wifi (no security)
View 4 Replies
View Related
Nov 23, 2011
I got an WRT160N,when I had 5mb connection it was working normal,but since I changed to 10mb,it downloads at 40kbp-100kbp,The connection is very stable,but the speed its very slow.I try to download the firmware but its with .bin extension and I don't know how to open it.
View 9 Replies
View Related
May 10, 2013
My WRT160N V3 halves my connection speed (5mbps to 2.7)with both wired and wireless. I have tried changing a lot of settings.
View 4 Replies
View Related
May 19, 2008
I have a WRT160N with one desktop connected via a lans cable, another desktop connected wireless via WUSB300N and a Laptop connected wireless via WPC600N.
View 6 Replies
View Related
May 25, 2011
I have the WRT160N. Using [URL], I can get 2.5Mps from wired ports, but less than 0.5 Mps using the wireless.
View 9 Replies
View Related
Aug 7, 2008
I've recently purchased a WRT160N router, and I'm using it in conjunction with a WMP54G wireless PCI card. I've set the router up to my requirements, and can get a stable wireless connection.. but internet speed seems excessively slow. While I'm able to get up to around 4MB/s transferring files over the network, running speed tests, it consecutively shows my download speed to sit around 400KB/s, whereas I'm able to get a steady 1.1MB/s on another desktop that is wired. Disabling the LAN adapter on that computer, and connecting via wireless, brings down the speed that that computer is able to get to around 400KB/s as well. Hence, I don't think it's my wireless cards, but something to do with the router itself.I'm also experiencing lag spike issues in online games, which I can only attribute to the current wireless setup, because I've previously had no issues with it. All relevant ports are forwarded, so that is not an issue.After doing some Googling on the subject, someone had suggested running SpeedGuide's TCP Optimizer, and changing the RWIN - I ran it, and set it to the 'optimal' settings, and after a reboot the wireless seemed fine - I was getting just a tad under what I should (about 950KB/s).. but after a short while, it just went back to 400KB/s. After further investigation, it seems that Vista automatically changes that RWIN value to optimize network traffic.. but I never had this issue with my old wireless gear, so I can only assume that the way Vista is reacting is based on the way the router is interacting with it.
View 9 Replies
View Related
Oct 22, 2011
I have cable internet 40 mbps my win xp pc is wired and gets 38-39 mbps download laptop1 is 1 year old w/ win7 gets 28-30 in the same room and laptop 2 is new w/ win7gets 4-5 in the same room I have updated firnware for router speed #s are from speedtest.net
View 2 Replies
View Related
Jan 15, 2012
I have the WRT160N. Using speed test.net, I can get 2.5Mps from wired ports, but less than 0.5 Mps using the wireless.
View 1 Replies
View Related
Jun 25, 2012
get a new router. but lets give it a try. I read many many post on how to optimize the speed of the router but none worked so far.I got a great wired Internet connexion hitting between 45 to 60 Mbps[URL] the wifi is crazy slow on Iphone, Macbook pro and iPad staying between 3 to 8 Mbps....
I tried to change all of the specs, did the firmware update. is there a perfect configuration with the new firmware ?
View 9 Replies
View Related
Aug 28, 2012
I have a Linksys WRT160N V2 wireless router that I am using with my Comcast Internet service. When I connect to the router via cable, I get download speeds up to 52Mbs (per www.speedtest.net). When I test my wireless connection, I can only get download speeds up to 14.5 Mbs, even though the Windows “Wireless Network Connection” speed shows 54.0 Mbs. I also verified this with another laptop, and got the same results. I also checked upload speeds, both wired and wireless I get the same speed of 11 Mbs.
Is there some reason I can’t get faster download speeds with a wireless connection?
View 3 Replies
View Related
Oct 16, 2011
I live in a house with 5 other students. To be fair, it is in the middle of nowhere so the internet is probably very slow anyway, but here is my problem: Skype is so slow I can only just make a voice call, webcam chat is off the cards. YouTube and other videos are so slow to load I cannot watch them. My Xbox 360 constantly disconnects from the wireless, so I cannot play online.
View 6 Replies
View Related
Nov 6, 2011
For a while now, my wireless network at home has been very unreliable. I posted on these forums before, asking for assistance to fix crashes that seemed to be random. I was largely unsuccessful, and the problem continued. However, as I continued to experiment with different methods to keep my network up and running, I noticed that as long as I had at least one device connected to the network around-the-clock it never crashed. This was easy enough, as I own an iPod touch and a dock (I would leave it sitting it the dock unlocked all the time). But it's annoying to never be able to leave the house with it, and I'm ready to finally get a solution to the problem once and for all. I would prefer not getting a new router, but if worse comes to worse I will.
To sum it up:
-Works perfectly (when up) at full speed, never crashes unless there are no devices connected to it.
-When it does crash, it is very difficult to 'coax' it back into working again; it's been down for weeks at a time before.
-For some strange reason (and maybe this is a clue), newer game systems such as a Nintendo DSi or PS3 can make it start working again. I, of course, own neither of these.
-I'm using a WRT160N V3, latest firmware as far as i know.
View 9 Replies
View Related
May 17, 2010
home router is a wrt160n v3 With my iPad I set up the built in IPSec VPN to my office's cisco gateway. I successfully get the VPN logo. With an RDP app, i can access my work network from multiple public locations from my iPad. At home, on my laptop, I start the cisco client then use the windows rdp, presto i'm in my work network. At home on my iPad I can activate the VPN, but I can not connect with rdp. I spoke with linksys support tonight they had me add port 3389 to port range triggering and disable the firewall on the home router. This didn't solve the problem. To recap: 1) I can connect to my work network with rdp from multiple public locations, but not at home with the iPad 2) I can connect to my work network at home with my laptop with the cisco client ant the windows rdp
View 6 Replies
View Related
Jul 21, 2011
I have a home network with a media center. I have the hauppauge 1212 HD pvr so that I can record video in HD to my hard drive. I want to stream this content to the differnet PCs on my home network. Every TV in my home I have hooked an HTPC to it. I use them to play dvd's. Stream netflixs etc. My problem is that I am getting a terrible transer rate wirelessly. 600 -750 kbps. (tested by transfering large files from pc to pc) All computers have 300Mbps wireless n cards. all are recieving max signals. There are either 3 or 4 pc's connected at a time depending on whether my laptop is connected or not. Obviously this is way to slow to stream video. Made sure my network name is unique. changed to wireless channel 1 I do think I have WEP 64bit encription could this be an issue?
View 7 Replies
View Related
Apr 14, 2011
I want to create a home network to share all my files across my three computers.. two pc, 1 mac laptop.They are currently all connecting wirelessly to my single router (linksys WRT160n flashed with DD-WRT). When I try to share the drives.. I notice they are all connected to separate duplicate network names ... such as NetworkName1, NetworkName2, NetworkName3 (even when they all connect to same SSID). get them all connect one network NetworkName so I can share folders across?
View 5 Replies
View Related
Aug 20, 2011
I have a problem with my wrt160n and l2tp connection. I setting up router to l2tp VPN connection and speed of internet is down, and connection with my router interrupt very often. How I can fix it all?
View 7 Replies
View Related
Jul 22, 2011
specs: linksys router wrt160n v3, verizon modem gt701c, windows xp service pack 3, verizon DSL, southern california.I have been able to connect to the internet directly through the modem only...but i need my wireless back working. I've reset my router a few times recently trying things i've read on forums from people with similar problems. The most recent thing i did was RESET the router -> connected modem/router/computer properly -> turned them all back on in the proper order -> check to see if websites would open. They didn't so i tried doing this, which was suggested...i plugged the router into the computer and enabled MAC address and then pressed the Clone MAC address button and saved....then I tturned everything off again and rebooted everything again in the proper order and still couldn't load any web pages. Here are my IPCONFIG/ALL read outs for both when i'm hooked up with the router & modem (which isnt working) and directly to the modem (which is working) this is the one with the router & modem:
C:Documents and SettingsOwner>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : shakas
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
[code]....
My modem and wireless were working fine for years...and then recently without me doing anything my modem kept dropping connection and the internet and dsl lights kept flashing and then going back solid....so i'd be connected for a few minutes and then they'd start flashing again over and over all the time. I finally called verizon and then had me fiddle around with stuff...followed all their directions...but ended up only being able to connect while directly connected to the modem. Even then, the modem was still losing connection and getting it back. (i was supposed to schedule a house call for a tech to check it out, never did) Over a couple weeks the connection ended up getting better on its own, so now it pretty much never drops out anymore. (almost) i've reset my modem, i've reset my router....i just still cant seem to get websites working with my modem and wireless router connected.
View 3 Replies
View Related
Oct 3, 2011
I recently changed the security mode on my router from WEP to WPA2 Personal. However, since that change, I've noticed that the wireless devices, 2-laptops, are intermittently loosing their connections. . I don't know if it has anything to do with the security mode change, but I don't want to go back to WEP for obvious reasons.
View 9 Replies
View Related
Dec 25, 2010
I had a secure connection, after trying to change the passsword, it now is unsecured. I was trying to connect a new Ipad to my router but I have failed miserably.
How can I get my router a password and then use that password to connect an Ipad to my home network? I reset the router, but the connection is unsecured, I can't figure out how to get it back.
View 5 Replies
View Related
Nov 4, 2011
I have a net gear WNR2000vs with the latest firmfware to date.wired devices connected: 1. my pc 2. xbox, and also one wireless device connected to my cell phone via wi fi.
View 9 Replies
View Related
Jun 3, 2009
Having problems with my wireless router, dropping and keeping connection active. For some odd reason I keep dropping connection either wireless or wired. I have a total of 5 items going through this router. 2 of them are wireless and the other 3 are wired. The wireless items are a desktop computer that is using the Wireless USB adapter to get online. Sometimes it drops and most of the time it doesn’t have any problems. I have a laptop that sometimes the connection goes from strong all the way down to no connection at ALL. It starts at 54MBPS to down to the RED X over the wireless manager. Forgot to mention both of these machines are Windows XP. If I reboot the laptop, it comes up without any problems.
Sometimes I tell Windows XP to manage the Wireless connection and tell it to disconnect and re-connect again, it goes. Now for the wired items, I have 2 gaming systems and another computer plugged directly up to the router. For some odd reason when I double click on the internet, on the computer that is hooked directly to the router, it says page couldn’t be found. I know that there is connection and there is nothing running in the task tray except for the Anti-Virus and Firewall. The browsers that I am using are Internet Explorer 8 and Mozilla Firefox 3.0.10. Also checked on the back of the machine to see if I have link lights and everything is flashing. Finally, when I click the homepage or refresh button about 2 or 3 times, it goes through.
think that I am overloading this Router and it can’t handle it. I might have to look into sending "Keep Alive" packet setting on the router.
View 9 Replies
View Related
Aug 4, 2011
here is what I have:
A) Sonic Wall @ 192.168.1.215
B) Linksys Switch (WRW248G4P) @ 192.168.1.254
C) Linksys Router (WRT160N) @ 192.168.1.202 (Disabled DHCP Server)
D) Linksys Router (E2500) @ 192.168.1.203
E) Windows Server 2003 @ 192.168.1.200
F) There is also a Router @ 192.168.1.201 that runs DD-WRT that has an enabled DHCP Server.
It goes something like this
i) A - B --ETHERNET-- E
ii) A - B --ETHERNET-- C
iii) A - B --FIBER to another building, then ETHERNET -- D
Everything connects to the internet, but (D) on (iii) doesn't allow connection to the server (E). What can I do to make this work?
View 1 Replies
View Related
Dec 19, 2012
I've got a router in room where my cable modem comes in. In center of house, I have another router, N Ultra Range PLUS, WRT160N.
My laptop, which I use in front room near that middle room router and my husband's desktop, also near that middle room have no problems. My desktop which is right next to the main router in back of house (where the cable modem is), has the weakest signal. I guess that's because the WRT160N is further away from it and has two walls to go through. But most of time signal was good - just not as good as the other two computers. And even when signal was Low, it never dropped connection.
Recently I got a new smart phone with WIFI. Anytime I have turned on the phone and used it, I often then have to refresh my wireless signal or reboot computer because it loses the connection. I read somewhere on internet that this may be because of the additional device but again, it doesn't effect the other two closer computers.
View 3 Replies
View Related
Dec 10, 2012
I have 3 laptops connecting wirelessly to this router. One is running at 18Mbps, the other two at 0.4Mbps. the internet setting are the same and the security is the same (WPA2-Personal with AES encryption). One of the slow computers is brand new and WAY faster than my "fast internet" computer. The other is about the same as the "fast internet" computer. I updated the I connected the new computer to the router tusing an ethernet cable and it had superfast internet. I redid the Cisco connect on each computer, but it didnt change anything. Why is it so slow wirelessly?
View 4 Replies
View Related
Aug 14, 2012
The wireless router, which is a linksys E1200 is completely new. I setup the entire wireless and there was no problems on that front.The problem is the wireless connection. Even when I am within a few inches of the router, I couldn't even load a youtube video properly. It buffers every 2 seconds. But when I plug the cable into my computer, it works completely fine. The signal strength is excellent all the time.
I tried using inSSIDer to look for the number of connections within my area for the one with the least inteference and found that I'm already on the good one, or actually, all of them looked more or less the same. But I tried changing anyways from 1 to 6 to 11, and none of them made a difference.I then tried changing my Wireless Security to WPA2 Personal. Then I tried changing the Wireless Network Mode to Wireless-G Only instead of Mixed and the wireless speed increased.
View 5 Replies
View Related
Jan 13, 2012
Often my router drops connection to all my devices. Multiple times a day. It's only for a minute or so, but it's annoying. I'm using a Linksys Wireless-N router (WRT160N) with WEP encryption. I'm running two Windows 7 laptops, LG BluRay player, Apple TV, Xbox 360 (Wired) iPhone 4, and a iPad 2. It doesn't matter if I'm browsing the web, watching Netflix, or playing a game, the connection gets lost. As we speak it happened again. I have no clue on what to do. I've reconfigured it multiple times. Firmware has been updated months ago.
View 6 Replies
View Related
Jul 8, 2011
i bought a WRT160N router
I connected the Router to the modem, and all the wired connected PCs were working perfectly.But then, i went to the setup page to configure the Wireless settings, and as soon I changed the SSID name, the connection internet connection droppedThe only way i had to fix this was by making a Hard Reset.after that, I also tryed changing values and settings from all the configuration tabs, and the wired connection was working properly, but as soon i changed any value from the Wireless tab, the internet connection dropped (even, in the diagnostics section, i could not do a ping to google. It says unknown host).
View 3 Replies
View Related
Feb 8, 2013
I have been spending days !!! trying to resolve why my laptop pc disconnects frequently from its wireless connection. No discernable pattern to disconnects, totally random. Happens in cycles of disconnect/auto reconnect or will go hours of stable operation. What I have noticed is tht the connection speed seems to vary, from a hig of 54.0 Mbps to as low as 2.0 Nbps. At same time the desktop pc (hard wired to modem) stays connected at 100 Mbps.Using RCA modem, WRT160n v3 router.
View 2 Replies
View Related
Aug 9, 2011
Comcast had us unplug our modem in order to upgrade to their new faster speed. now our wireless router won't work. We've reset the router twice. we can set up the wireless network but we cannot connect to it. The connection last for about 5 minutes and then we get an error, cannot read IP address. Comcast says it is not their problem and linksys says they can't assist either.
View 1 Replies
View Related
Jul 3, 2012
Transfer speed for sending or receiving files from a USB external HDD connected to the router is slow? Speed ranging from 2MB - 4MB/s. The HDD is definitely capable of at least 80MB/s if plugged directly into the PC. Is it meant to be this slow or there's a fix somewhere which I'm not aware of? Thought it's suppose to be the top of the line products but seems so inferior if I were to compare with other high end routers in the market which performs better, faster and definitely much cheaper.
View 9 Replies
View Related
