Linksys Wireless Router :: WRT160n Signal Loss And Connection Speed Variations
Feb 8, 2013
I have been spending days !!! trying to resolve why my laptop pc disconnects frequently from its wireless connection. No discernable pattern to disconnects, totally random. Happens in cycles of disconnect/auto reconnect or will go hours of stable operation. What I have noticed is tht the connection speed seems to vary, from a hig of 54.0 Mbps to as low as 2.0 Nbps. At same time the desktop pc (hard wired to modem) stays connected at 100 Mbps.Using RCA modem, WRT160n v3 router.
View 2 Replies
ADVERTISEMENT
Aug 9, 2011
Comcast had us unplug our modem in order to upgrade to their new faster speed. now our wireless router won't work. We've reset the router twice. we can set up the wireless network but we cannot connect to it. The connection last for about 5 minutes and then we get an error, cannot read IP address. Comcast says it is not their problem and linksys says they can't assist either.
View 1 Replies
View Related
Nov 23, 2011
I got an WRT160N,when I had 5mb connection it was working normal,but since I changed to 10mb,it downloads at 40kbp-100kbp,The connection is very stable,but the speed its very slow.I try to download the firmware but its with .bin extension and I don't know how to open it.
View 9 Replies
View Related
Jan 16, 2012
I had to change from a WRT300N wireless router which died to a new E2500. I noticed that the speed my computers report that they are connected to the wireless network connection is now 144.5 mps, versus 270 mps with the WRT300N. There is no change in location of the devices or computers. The computers use a WUSB300N adapter. Is there a setting or setup that needs to be changed?
View 3 Replies
View Related
Nov 24, 2011
I have Linksys WRT160N v2 wifi router that I have been using for over a year now, till two months back I was very happy with the router, speed was good without any signal issues though in last couple of weeks I have noticed that the router has started to create problems like the browsing will stop it self for a few seconds without any reason (specially I notice this when I am on youtube playing a video that will stop after 2 or 3 minutes).
View 7 Replies
View Related
Dec 23, 2011
I had to change from a WRT300N wireless router which died to a new E2500. I noticed that the speed my computers report that they are connected to the wireless network connection is now 144.5 mps, versus 270 mps with the WRT300N. There is no change in location of the devices or computers. The computers use a WUSB300N adapter. Is there a setting or setup that needs to be changed?
View 2 Replies
View Related
Mar 29, 2012
I'm using the Linksys WRT160N V3 for testing a few ambedded applications.I need to set the speed of operation of the router to 100Mbps. (or at least find out what speed it currently supports) I looked up the router home page and couldn't find anything concrete.
View 3 Replies
View Related
May 25, 2011
I have the WRT160N. Using [URL], I can get 2.5Mps from wired ports, but less than 0.5 Mps using the wireless.
View 9 Replies
View Related
Aug 7, 2008
I've recently purchased a WRT160N router, and I'm using it in conjunction with a WMP54G wireless PCI card. I've set the router up to my requirements, and can get a stable wireless connection.. but internet speed seems excessively slow. While I'm able to get up to around 4MB/s transferring files over the network, running speed tests, it consecutively shows my download speed to sit around 400KB/s, whereas I'm able to get a steady 1.1MB/s on another desktop that is wired. Disabling the LAN adapter on that computer, and connecting via wireless, brings down the speed that that computer is able to get to around 400KB/s as well. Hence, I don't think it's my wireless cards, but something to do with the router itself.I'm also experiencing lag spike issues in online games, which I can only attribute to the current wireless setup, because I've previously had no issues with it. All relevant ports are forwarded, so that is not an issue.After doing some Googling on the subject, someone had suggested running SpeedGuide's TCP Optimizer, and changing the RWIN - I ran it, and set it to the 'optimal' settings, and after a reboot the wireless seemed fine - I was getting just a tad under what I should (about 950KB/s).. but after a short while, it just went back to 400KB/s. After further investigation, it seems that Vista automatically changes that RWIN value to optimize network traffic.. but I never had this issue with my old wireless gear, so I can only assume that the way Vista is reacting is based on the way the router is interacting with it.
View 9 Replies
View Related
Mar 2, 2012
I have WRT160N router and am not sure if I have a connectivity problem or a setting issue. I've done a speed test with speakeasy.net and get fine through the hard wire desktop (25.16/3.77) but when I do it on my wireless laptop I get 2.03down / 3.66up. The speeds were basically the same right next to router as it was 40' away.
View 3 Replies
View Related
Jan 15, 2012
I have the WRT160N. Using speed test.net, I can get 2.5Mps from wired ports, but less than 0.5 Mps using the wireless.
View 1 Replies
View Related
Feb 21, 2012
I have lately been having trouble with the speed of my wireless connection. usually downloads can run at approx max 1.2MB/S i have noticed significant speed drops in my downloads - when i connect to the network it starts off at 130mpbs, but then quicky drops to 12mbps - no settings have been changed recently.
Windows XP
LinkSYS Wireless N Router E1000
Netgear Wireless Repeater
Signal Strength on Repeater is indicated as strong
Signal Strength on Laptop is indicated as Excellent
View 1 Replies
View Related
Feb 3, 2012
I have a 30Mbps download speed when plugged directly into my modem.
When I go from modem to router and then directly plugged into computer (using ethernet) it degrades to 15 Mbps.
When I swith to wireless and I step about 20 feet from router my speed degrades down to 0.57 Mbps with full signal strength.
My version of firmware is 1.2.11. Here are my settings:MTU = 50Beacon = 50
Fragment Threshold = 2304
RTS = 2304
Radio Band = 20 GHZ channel
Standard Channel = set to 11
Network mode is mixed.
Security is a WPA2 / AES
What's wrong with this router that my download speed is degrading so much?
View 5 Replies
View Related
Aug 28, 2011
I am sharign my bandwidth with my neighbour and would like to keep a tab on what he is downloading, and then limit the speeds he gets while using my 4Mbps line. He's accessign using a WIFI L:AN card.Can I do this usign WRT160Nv2? Maybe any third-party.
View 2 Replies
View Related
Dec 26, 2012
I have a wrt160n as my main router cascading to an e1200 at the other end of my house. The idea was to enhance the wireless signal there. Went thru extended discussion with Cisco support settnig the system up.
Ip address of e1200 is set more than 5 apart from primary router, dhcp is disabled. The connection bewtween routers is Wan to Wan.
I have wired signal at the e1200 but no wireless signal?
View 2 Replies
View Related
May 27, 2012
Bought the new EA4500 a couple of days ago and have looked at my wireless connection and see it varies from 72Mbps to 144Mbps. It has jumped up to 270Mbps a few times, but rarely. Shouldn't it be 300Mbps most of the time? My laptop is 4 feet away from the router and the router is on top of a card board box being elevated away from interference. The prior router was a dlink 855 that went whacky after 3 years. I believe I was usually at 270 Mbps with that. What gives? Do I have a faulty router? With this new router, I expected the range to be a lot farther and faster too, but it is not in my family room. 2nd floor router, family room is 1st floor about 50 feet away and I get 1Mbps - 5Mbps. Everything is set to Auto on router and IP6 is disabled on laptop.
View 9 Replies
View Related
Aug 30, 2012
I have been disappointed by the range of the EA4500 compared to previous routers, but I am most puzzled by it's behavior. I may get an "excellent" connection close to the router (one room away) and speeds up to 65 Mps, but after a few minutes of surfing the web the signal strength and speed can drop substantially.
The problem is the worst at a distance (one floor down in our house, maybe 30 feet away in total) where the signal strength may start at "good" and a speed of perhaps 30 Mps, but then after 3-4 minutes drops to "poor" and maybe 5 Mps.
View 4 Replies
View Related
Dec 30, 2011
I am getting very slow download speeds on my wireless router (Linksys model#WRT160N). I measured it on speedtest.net. with my ASUS laptop, ASUS Transformer Prime tablet, and 2 Ipod touches. All similar speeds.
Download avg: 1.30 Mbps
upload avg: 6.20 Mbps
I measured my desktop speed that is hardwired through the router to the modem.
Download avg: 30.00 Mbps
upload ave: 6.20 Mbps
I have scanned all the wireless connection in my area and found them to occupy channels 1, 6, 11. I tried changing my channels one at a time for all 11 channels. Some did a little better than others but not a lot.Also, if I by a dual channel router, can all wireless devices pick up on the 5GHz spectrim and if some, could this alleviate some interference?Is it possible that my router is going bad and a new single channel 2.4 GHz router will be fine?
View 2 Replies
View Related
Feb 3, 2013
Having several issues w my E1200. For quite some time I have had intermittent loss of internet connection. This was somewhat true even before I got a wifi router. & it has continued. Recently it has been even worse & I'm not sure if it is my isp, my cable modem or the router. ISP came out & checked & said signals looked ok, although modem is old.Now i find out that the version of Cisco Connect that i had been using is incompatible w Mountain Lion so it won't work now. & newly downloaded dmg files say they are damaged (or that app has been modified or damaged--I'm not in a position to tell which but same results after I downloaded a 2nd time).
I have been having more frequent loss of internet connection at home. & when I click on the wifi icon to check, it shows it looking for networks. Also it has not been uncommon to see that it has switched to my guest network.Why would it switch to my guest network? What is the difference between the 2 besides the fact that I guess the guest network doesn't have access to everything on my regular network (which right now is only my iPhone, but may get wireless printer).Also when it shows the lists of networks that it "sees" my guest network does not show a padlock icon so what does that mean? It does have the default password.
Also because I had no idea that Cisco Connect was not compatible w Mountain Lion I didn't even think to check for upgrades before I upgraded to Mountain Lion & now I can't open Cisco Connect. Shows unsupoprted OS. & I'm also stalled trying to update the firmware for the router.I'm really beginning to see why it was cheaper than an Apple Airport Express. Even at a very low hourly rate, the lost time spent when this has not been working right has not been worth what I saved on the purchase price.
View 4 Replies
View Related
Aug 20, 2011
I have a problem with my wrt160n and l2tp connection. I setting up router to l2tp VPN connection and speed of internet is down, and connection with my router interrupt very often. How I can fix it all?
View 7 Replies
View Related
Mar 9, 2013
I've tried all sorts of settings, and I'm still holding out that its a setting possibly, but I have a E3500 and devices on both 5Ghz and 2.4Ghz... Most of them, probably when idle, seem to stop working over WIfi. They still have decent connection, but every internet related request just times out. Disable and reinable the wifi and it works great again.
Could this be defective wifi radios? or could it really be interference? I have it happening on multiple devices. Also, I'm not far away from the router when it occurs, and when I reconnect, it seems to work just fine for a while. Basically the big problem is on the cell phones and tablets because I'll miss notifications... I'll turn off the wifi and turn it back on when I use the device next, then a flood of notifications will come in. Again, it's not just a phone thing, tablets and laptops have the same problem, that's just the main reason I want it fixed.
View 5 Replies
View Related
Jul 22, 2011
specs: linksys router wrt160n v3, verizon modem gt701c, windows xp service pack 3, verizon DSL, southern california.I have been able to connect to the internet directly through the modem only...but i need my wireless back working. I've reset my router a few times recently trying things i've read on forums from people with similar problems. The most recent thing i did was RESET the router -> connected modem/router/computer properly -> turned them all back on in the proper order -> check to see if websites would open. They didn't so i tried doing this, which was suggested...i plugged the router into the computer and enabled MAC address and then pressed the Clone MAC address button and saved....then I tturned everything off again and rebooted everything again in the proper order and still couldn't load any web pages. Here are my IPCONFIG/ALL read outs for both when i'm hooked up with the router & modem (which isnt working) and directly to the modem (which is working) this is the one with the router & modem:
C:Documents and SettingsOwner>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : shakas
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
[code]....
My modem and wireless were working fine for years...and then recently without me doing anything my modem kept dropping connection and the internet and dsl lights kept flashing and then going back solid....so i'd be connected for a few minutes and then they'd start flashing again over and over all the time. I finally called verizon and then had me fiddle around with stuff...followed all their directions...but ended up only being able to connect while directly connected to the modem. Even then, the modem was still losing connection and getting it back. (i was supposed to schedule a house call for a tech to check it out, never did) Over a couple weeks the connection ended up getting better on its own, so now it pretty much never drops out anymore. (almost) i've reset my modem, i've reset my router....i just still cant seem to get websites working with my modem and wireless router connected.
View 3 Replies
View Related
Apr 10, 2012
I have speed 12M when I connect wrt160n v3 through l2tp, my speed down to 4M-5M. When i connect modem directly to computer I get speed 12M.
View 1 Replies
View Related
Oct 3, 2011
I recently changed the security mode on my router from WEP to WPA2 Personal. However, since that change, I've noticed that the wireless devices, 2-laptops, are intermittently loosing their connections. . I don't know if it has anything to do with the security mode change, but I don't want to go back to WEP for obvious reasons.
View 9 Replies
View Related
Dec 25, 2010
I had a secure connection, after trying to change the passsword, it now is unsecured. I was trying to connect a new Ipad to my router but I have failed miserably.
How can I get my router a password and then use that password to connect an Ipad to my home network? I reset the router, but the connection is unsecured, I can't figure out how to get it back.
View 5 Replies
View Related
May 24, 2012
I upgrade the firmware to Version: v1.52.0. The connection by wired is very good, i haven't slowness in internet. But if i'am connect by wifi, the website are very slow to load, and i can't see video on youtube without waiting.
I test without configuring the wifi (no security)
View 4 Replies
View Related
May 28, 2012
I have an E1200 and am time out and packet loss issues. The internet connection is fine for 30 seconds to five minuets and then everything times out for 15-20 seconds. Although it’s only a minor incontinence to web browsing, it makes playing games and watching videos a nightmare. “Lost connection to server error.” and the like…
I upgraded to a new router, the e1200 I am currently using, from my Tenda 10/100 N. The problems where the same that I am experience currently and the reason I bought it in the firs place.When I directly connect to the cable modem, I have no issues and everything is fine.I have run a trace route and the second hop, (the router to the modem) is the choke point.I have cloned the MAC address.I have updated the firmware and hard reset
I have throttled my MTU to automatic, 1500, and 1472. None making any difference.I have disabled NAT and all that does is kill my internet connection.I have disabled all firewalls router and windows, no change.I replaced the physical wire from the router to the modem.I have disconnected all devices except one computer, and no difference.I ran a DNS trace and I have… non routable local internet address 192.168.1.1 DNS-cac-lb-01.rr.com and DNS-cac-lb-02.rr.com.I am using windows 7 and my ISP is time Warner so-cal.
View 8 Replies
View Related
Jun 3, 2009
Having problems with my wireless router, dropping and keeping connection active. For some odd reason I keep dropping connection either wireless or wired. I have a total of 5 items going through this router. 2 of them are wireless and the other 3 are wired. The wireless items are a desktop computer that is using the Wireless USB adapter to get online. Sometimes it drops and most of the time it doesn’t have any problems. I have a laptop that sometimes the connection goes from strong all the way down to no connection at ALL. It starts at 54MBPS to down to the RED X over the wireless manager. Forgot to mention both of these machines are Windows XP. If I reboot the laptop, it comes up without any problems.
Sometimes I tell Windows XP to manage the Wireless connection and tell it to disconnect and re-connect again, it goes. Now for the wired items, I have 2 gaming systems and another computer plugged directly up to the router. For some odd reason when I double click on the internet, on the computer that is hooked directly to the router, it says page couldn’t be found. I know that there is connection and there is nothing running in the task tray except for the Anti-Virus and Firewall. The browsers that I am using are Internet Explorer 8 and Mozilla Firefox 3.0.10. Also checked on the back of the machine to see if I have link lights and everything is flashing. Finally, when I click the homepage or refresh button about 2 or 3 times, it goes through.
think that I am overloading this Router and it can’t handle it. I might have to look into sending "Keep Alive" packet setting on the router.
View 9 Replies
View Related
Aug 4, 2011
here is what I have:
A) Sonic Wall @ 192.168.1.215
B) Linksys Switch (WRW248G4P) @ 192.168.1.254
C) Linksys Router (WRT160N) @ 192.168.1.202 (Disabled DHCP Server)
D) Linksys Router (E2500) @ 192.168.1.203
E) Windows Server 2003 @ 192.168.1.200
F) There is also a Router @ 192.168.1.201 that runs DD-WRT that has an enabled DHCP Server.
It goes something like this
i) A - B --ETHERNET-- E
ii) A - B --ETHERNET-- C
iii) A - B --FIBER to another building, then ETHERNET -- D
Everything connects to the internet, but (D) on (iii) doesn't allow connection to the server (E). What can I do to make this work?
View 1 Replies
View Related
Dec 19, 2012
I've got a router in room where my cable modem comes in. In center of house, I have another router, N Ultra Range PLUS, WRT160N.
My laptop, which I use in front room near that middle room router and my husband's desktop, also near that middle room have no problems. My desktop which is right next to the main router in back of house (where the cable modem is), has the weakest signal. I guess that's because the WRT160N is further away from it and has two walls to go through. But most of time signal was good - just not as good as the other two computers. And even when signal was Low, it never dropped connection.
Recently I got a new smart phone with WIFI. Anytime I have turned on the phone and used it, I often then have to refresh my wireless signal or reboot computer because it loses the connection. I read somewhere on internet that this may be because of the additional device but again, it doesn't effect the other two closer computers.
View 3 Replies
View Related
Mar 10, 2011
Product: Linksys Wireless-G Broadband Router WRT54G
Version: 6
Firmware: Has Been Updated
I am directly connected to my router. Lately, I have been receiving high latency spikes and total loss of internet. The problem must be related to my router, because when I connect to the internet through my modem I don't have this problem.
View 9 Replies
View Related
Jan 13, 2012
Often my router drops connection to all my devices. Multiple times a day. It's only for a minute or so, but it's annoying. I'm using a Linksys Wireless-N router (WRT160N) with WEP encryption. I'm running two Windows 7 laptops, LG BluRay player, Apple TV, Xbox 360 (Wired) iPhone 4, and a iPad 2. It doesn't matter if I'm browsing the web, watching Netflix, or playing a game, the connection gets lost. As we speak it happened again. I have no clue on what to do. I've reconfigured it multiple times. Firmware has been updated months ago.
View 6 Replies
View Related
Oct 9, 2012
As of last night my router has been producing slow connectivity when multiple users are connected to it, but it's perfectly fine when only one user is connected. I am on a laptop myself, but we also have a second laptop and a desktop where the modem and router are set up. I have upgraded the firmware so that is up to date. We have Comcast Fiber Optics so my internet speed is normally quite fast even when all of my computers are connected.
I am using DHCP Configuration. My Channel Width is set to 20 MHz and I am using Channel 11. The Security Mode is set to WPA Personal. I had it on WPA2 Personal but I read that changing to WPA Personal might work and so far it doesn't seem to have done anything. I set the Beacon Interval to 50, Fragmentation Threshold to 2304, and RTS Threshold to 2304. Everything else is set to the default factory configuration.
Just today I received a notice that said "Windows has detected an IP Address Conflict", but ever since I reinstalled the Firmware it hasn't come back. I've rebooted both my laptop and the desktop to confirm it hasn't come back as well. I've tried everything that I could think of including reconfiguring my router and restarting my modem as well.
View 6 Replies
View Related
