Linksys Wireless Router :: WRT160N - Access To IP Address 192.168.0.1
Sep 16, 2012
I have Linksys router model no. WRT160N, which I have been using for three years. I need to add two iPads to my router but I do not know the network password. I am trying to access the router IP address 192.168.0.1 to find out the network password, but when I put HTTP://192.168.0.1 in my browser, I receive the message: Internet Explorer cannot display the webpage. How can I find out the network password?
View 9 Replies
ADVERTISEMENT
Feb 14, 2012
How do I change the IP address on the router?
View 1 Replies
View Related
Mar 22, 2013
I have a FIOS setup with their Router/modem providing DHCP and Wireless routing. The problem I have is that I have a mix of older equipment and newer equipment. The newer equipment is capable of supporting WPA2, the older is not. I would like the benefits of WPA2, but still would like to at times be able to use the older equipment.My solution was to use a WRT160N v2 router that I had as an access point and it also gives me switch capabilities for wired systems as the FIOS router in on a different floor than the Linksys router. Wired access works just fine and the wireless worked fine until just recently.Since both routers have the same default IP addresses I changed the Linksys to a different static IP and turned off DHCP. I left all of the other defaults the same. I set up the Linksys for WEP and created the key for security. Everything worked fine for the better part of a year, but recently I am having problems where some of the computers cannot find the network or find it then lose connection.
View 9 Replies
View Related
Mar 23, 2010
Even when I disable remote access, people still can get to my router login by typing my external IP. Is there anything I can do to stop this?
View 5 Replies
View Related
Jul 28, 2011
I have a Router WRT160N and need to connect an Access Point using a wireless bridge (i.e. cannot use cable between router and AP). Which Linksys Access Point model is recommended to use with this router?(No I dont want to use another WRT160N with DD-WRT!)
View 1 Replies
View Related
Dec 25, 2011
While trying to add my kindle fire (unsuccessfully) I lost all internet connections, now my laptop won't connect. I reset the router and and can see my wi-fi account but when I try to use on my PC and laptop it won't recognize it.
View 3 Replies
View Related
Aug 3, 2011
I have a WRT 160n I want to use as an access point. The cable company has provided the main router so I want to use the 160 as the access point. I have a switch attached to the router and have the 160 attached to the switch. I can ping and access the 160, however there signal strength has not changed and is still extremely low. I know that the strength on the router is very good when I plug it in to the cable modem.
View 1 Replies
View Related
Sep 19, 2011
I just bought a Linksys E4200 wireless router. I have an old Linksys WRT160N wireless router. I would like to setup the WRT160N downstairs to wire the DirecTv box and PS3 to it. Then wirelessly connect to the E4200 upstairs where our modem is connected. Can the WRT160N be used as an access point to do this or do I need other equipment?
View 1 Replies
View Related
Dec 10, 2008
I am having trouble logging in on my wireless router and when i put "admin" (WITHOUT QUOTATIONS) on the password, the same prompt kept on coming for three times and after that the message says "401 Authorization Required" (WITHOUT QUOTATIONS). I don't get though, i installed the wireless router just after i change admin and my password into (******).
View 9 Replies
View Related
Mar 21, 2013
I have a wrt160n v1 that stopped working after a power outage. The power light stays solid and I cannot reset the device with the reset button, power cycle, and I cannot access the user interface at 192.168.1.1. Is it bricked? It doesn't show up on my wireless network and when I try to access it via ethernet cable it shows up as an unidentified network with no network access
View 2 Replies
View Related
Oct 13, 2008
I got this router and I need to set it as an Access Point (will not be using the routing functionality) in the far side of our building. Our LAN uses IP address in the range 10 with subnet 255.0.0.0, so I need to put the access point ino this subnet. The drop down box only allows me to set some predefined subnet masks, none of which matches ours. So how am I supposed to set this router in our LAN?
View 9 Replies
View Related
Oct 16, 2012
I have updated the WRT160n firmware and, since then, I couldn't access the setup page anymore. I could still use the router as a switch, but couldn't access the setup page and configure it as a router.
View 5 Replies
View Related
Nov 15, 2011
Everything was going great until tonight. I can connect to the internet fine wired. Wireless devices can connect to the router, but cannot access the internet. No changes were made to the unit. Updatae firmware to 1.02.11 but that did not fix the issue.
View 1 Replies
View Related
Jan 13, 2010
I am thinking about purchesing this router. But I need know if this router has DHCP reservation function. If router can assign to specific MACs their own IP adress. I had WRT160N for a week, but my ISP change technology. WRT160N had this function, but I am reading here, that WAG160N not.
View 5 Replies
View Related
Feb 16, 2012
I was unable to access the web admin on my WRT160n v3 w/ latest firmware this morning. Reset config to defaults & was able to get in. Enabled HTTPS access & disabled HTTP access & was right back where I started; reset to defaults again & left both boxes checked. Can access via HTTP, but HTTPS requests get refused/reset.
The reason I needed access was that when I booted up my laptop this morning, my wireless card wasn't picking up an IP address via WIFI, only worked via ethernet, so I need to see what was going on there — several reboots of the router didn't fix, nor has it fixed the HTTPS access problem described above.
View 6 Replies
View Related
Nov 10, 2011
I am cascading a wrt160n (R1) and a wrt160nl (R2) which are hooked up LAN port to LAN port (via a DLink power line adapter). R1 is hooked up via dhcp to the internet. The whole system works wonderfully for several hours until all of a sudden wireless access to R2 ceases to work (though I still can access everything wired). [code]
View 4 Replies
View Related
Jul 24, 2011
I want to use my WRT160n in my room to connect all my devices (Xbox, playstation 3, and 3 laptops) I hardwired the E3000 from the room downstairs thats connected to everything else.
View 2 Replies
View Related
Aug 20, 2012
why i can't add a new policy. I can't fillin a policyname or change the status from disable to enable. I have model V2 with firmware v2.0.03 build 007Jul 2, 2009
View 3 Replies
View Related
Aug 9, 2012
We have a home use WRT160N router linked to a PC desktop and two wireless laptops, Yesterday bought a new I-Phone, but could not link to my network (entered the security key many times). I accidentally connected to computer fix it firm that linked to my PC and wanted a large sum to fix the problem which he said was due to large number of temp?? internet files and once removed he would change the IP address of the desktop computer? Is this diagnosis logical and can I do it on my own. The router is definetely working - both laptops access the internet and I was recently able to hook up a Samsung Blu-Ray player using the same security code I used for the I-Phone.
View 1 Replies
View Related
Nov 18, 2012
I have a desktop running XP. I am using comcast as my ISP. I have my printer attached to my Linksys wrt160N router via Ethernet. My desktop is also attached via ethernet. I also have a laptop attached to the router via wireless. How do I access the printer via the router from either the desktop or laptop? I had it configured properly in the past then lost my motherboard. Once the PC was rebuilt, I lost access.
View 6 Replies
View Related
Sep 27, 2011
After updating the firmware on my WRT160N. I can ping it with no problem, but I can't access it via my browser to modify settings.
View 4 Replies
View Related
May 19, 2008
I have a WRT160N with one desktop connected via a lans cable, another desktop connected wireless via WUSB300N and a Laptop connected wireless via WPC600N.
View 6 Replies
View Related
Feb 10, 2010
I have an AT&T broadband router. A WRT160N is connected to it, so I now have Wireless-N capability. I have a second WRT160N that I would like to put in my living room as an access point, so I can connect my BluRay player to it and stream video. How do I set up the second WRT160N as an access point?
View 9 Replies
View Related
May 17, 2010
home router is a wrt160n v3 With my iPad I set up the built in IPSec VPN to my office's cisco gateway. I successfully get the VPN logo. With an RDP app, i can access my work network from multiple public locations from my iPad. At home, on my laptop, I start the cisco client then use the windows rdp, presto i'm in my work network. At home on my iPad I can activate the VPN, but I can not connect with rdp. I spoke with linksys support tonight they had me add port 3389 to port range triggering and disable the firewall on the home router. This didn't solve the problem. To recap: 1) I can connect to my work network with rdp from multiple public locations, but not at home with the iPad 2) I can connect to my work network at home with my laptop with the cisco client ant the windows rdp
View 6 Replies
View Related
Aug 7, 2011
I wanted to reset my IP address, so I called my cable internet service provider and they walked me through the process. I unplugged the ethernet cable from my router and connected my computer directly to my modem. Then, I unplugged the coax cable from my modem, plugged in back in again, and within Windows did ipconfig/renew in the command prompt. This successfully changed my IP address.
Then, I ran my wires back into the router again (instead of plugging the computer directly into the modem). To my surprise, the old IP address was back again! So, I went into linksys 192.168.1.1 screen to release the IP address and started the process over again.
I got a new IP address once again, but now the Linksys router can't seem to figure out the new IP address so nothing works going through the router.
View 1 Replies
View Related
Oct 9, 2011
When I change my WRT320N routers IP address to use it as an access point only and bring it in the IP range of my ccombined modem/router I'm not able to view the setup page via the new IP address. I have tried to change the IP from the default 192.168.1.1 to 192.168.178.2. After changing and applying the changes I restarted the router and tried to access the router via the new address. This was not possible am I doing something wrong or did I forgot something?
View 8 Replies
View Related
Mar 1, 2012
I have a wrt54gs v7 and a wap54g v3.1. Both have latest firmware on them. I set the access point to act as a repeater and entered the mac address from the router (It said to use the lan mac address. is that right?). I have them set on same subnet with static ip addresses. They have same wireless ssid and password with one using channel 10 and the other using channel 2. I can receive an ip address from the router and connect to internet. I cannot get an ip address from the access point. I tried a static ip on the computer and it will connect, but I don't have internet. Am I missing something in the setup? Can this access point act as a repeater for this router?
View 3 Replies
View Related
Apr 28, 2012
I have a ADSL Modem with built in router that the E1500 is connected to via Ethernet.If I choose "Automatic Configuration" for the internet connection setting on the E1500 I can enable DHCP on the E1500 but the gateway it gives to clients is always that of itself (192.168.1.1). The gateway it should be is that of the ADSL Modem (192.168. 1. 254).If I choose "Bridge Mode" I can't even enable DHCP.Is there a way I can use the DHCP server?
View 1 Replies
View Related
Jul 29, 2011
I have a router WRT160N and I want to connect an AP using a wireless bridge to enhance my WIFI coverage.Which AP is recommended to use without cable together with the WRT160N?
View 7 Replies
View Related
Oct 15, 2012
confirm if the highest speed I can get over WiFi with WRT160N v3 is actually 270 Mbps (and not 300 Mbps as advertised), And there's one more thing - is it normal to have Signal: -51; Noise: -93, SNR: 43, Signal quality 53% if I am only 2 meters far from a router? TX power is set to 28.
View 3 Replies
View Related
Mar 13, 2013
I have been looking into this router, I would like to know if I can enable Parental controls or access restrictions to block a MAC or IP address; from 03:00 AM - 06:00 AM ?Instead of Midnight to 6:00 am.My E4200 works just fine, Just would like to know if the EA6500 Can do that ?
View 7 Replies
View Related
May 1, 2010
I have a wrt160n v3. This is the 3rd one - both the first 2 were defective. I have spent approximately 8 hours troubleshooting the other 2 only to be told they're defective. So, I got a new one. Now, this one keeps cutting in and out. I want as my iPhone constantly switches from 3G to wifi on and over every minute. It really ticks me off! What can I do to fix this? This is a different issue than the original one (very slow) and 2nd (no signal). It's disappointing for a $90 router to do this. I also see the wireless icon on the router flash.
View 6 Replies
View Related
Jan 4, 2012
I have all the ports open necessary and i have upnp enabled. my modem is a webmaster DPC2100 series.
View 2 Replies
View Related
