Home Network :: Setting Up Networks With Multiple Locations / Wireless Points?
Feb 11, 2011
setting up networks with multiple locations and multiple wireless points.For example: My sisters' home has here modem in her main computer room, it has a Belkin router hooked to the modem. Then a line goes from there to my nephew's room where I tried to expand their network by adding another router. I really just wanted an access point, but they don't seem to sell these as much as they used to. Anyway, I had it working, but it was two different networks, NETWORK1 and NETWORK2. So they had to swap networks when moving around the house. what would be the best hardware setup to provide both sides of the house with some Hardwired access as well as wifi access? Right now, we have two routers, a DIR615 (or something like that) and a Cisco E1000, and again hardwire going from the main computer room to my nephew's room.Also, in my house, I have lots of stuff... I have an Actiontec Router from FIOS, feeding a small hub as well as a switch in my main room. Which then feeds a Ps3, Wii, laptop, Denon reciever, and Access Point... and also feeds my Apple TimeCapsule, which also feeds my printer. My wireless devices range from cameras, iphones/ipads, and a wifi unit (I forget what it's called, but it connects my DVR wirelessly to my network, and the DVR itself doesn't have wifi).
my question about my setup is, should everything be on one network... as in let the ActionTec handle most of the duties and use switchers and accesspoints to extend the network. Should everything be on the same wireless network and channels? Like if I used my access point to extend, do I want the same settings as my main wireless router, and would that be the same for the Apple Airport Extreme?Also, does having all these wireless networks going create any kind of hinderance on my performance. For example, the PS3 has some sort of wifi in it... it produces a SSID, but I never connect to it. Should I make sure that's off? And in my main room, should I go with just the AirPort extreme over using it and the Wireless Access point.
View 1 Replies
ADVERTISEMENT
Jan 27, 2012
Well this process is self explanatory, setting up the network is easy but im running into trouble with my wireless devices connecting to the strongest signalIm not exactly sure if there is a fix for this yet or if they have not made a protocol to fix it. I have a big house with solid wall in which i have setup 3 wifi's. 1st Modem/wifi Router, 2nd Wifi access point, 3rd wifi access point. Now the problem im having is moving between the access points my devices such as my ipad are changing from one access point to the next whilst moving throughout the house (that is until it loses the first signal I believe or you turn your ipad wifi off/on so it reconnects back to the strongest/closest access point).
View 4 Replies
View Related
Sep 27, 2011
I have a router that is capable of wireless N at 5.0GHz but can't run simultaneous with it's 2.4GHz band a/b/g (Cisco Linksys E2000), so I have a second router acting as gateway for my b/g devices (and a few wired only that are nearer to it). They are connected LAN port to LAN port with 50ft of cat6 and the DHCP server running on only one router. I know this is pretty standard for multiple access points, and it works very well. But I'm moving, and in the new house, the internet access will be on one floor with the wireless N router, and the other router will need to be in the basement on the opposite end of the house, and running networking cable through the floor and walls is just too much trouble. My question is, can I replace the previous wired method with a wireless N bridge attached to the LAN port of the router in the basement and have it function in the same way as it did when it was wired, with only the DHCP server running on the wireless N router, and all devices attached to either router able to see each other? I would assume so, but I would like to know from anyone who has experience with it before I go buying the bridge.
View 3 Replies
View Related
May 28, 2011
I work in a medium sized business with 50~ employees. We recently decided to allow wireless access for employees, newer computers with internal wifi, and customers. Now, I'm savvy enough to know how to setup a wireless router without using the instructional CD and just accessing it directly via the IP, that's all fine and dandy. However, the range of one singular wireless router hardly covers 20% of the building.
1: The main network hubs are located in a maintenance room far off in the corner, so setting up a wireless device there was not beneficial. I attempted to set one up via an ethernet port in the middle of the building. This worked without issues, and connected fine, however- The wireless router now has it's own separate set of IPs instead of "being one with the main router/hub." Our default IPs are 192.168.15.***, while this wireless router has created a separate set of IPs with 192.168.1.***. This wouldn't be much of an issue were it not for the fact our server needs to be connected via RDP through some wireless devices. So we cannot type in the typical IP to connect to the server since it's no longer in the same network, this also eliminates printer access. The simple question to all this is if it is possible to have a wireless router connected via a port of the main router still believe it's the same network like hubs do, or does this require a separate wireless device I'm unaware of?
2: The second issue is partially relative to the first. Range. As mentioned, one wireless router is not enough to allow wireless in the entire building. Boosting the signal will still result in weak signals, so the better option would be, at my only knowledge in regards to routers: more wireless routers. So I purchased three wireless routers, however the signal is still spotty. So aside the issues in question #1 to sync all routers together, is there a different device I could purchase or a method to make wireless router's range extended over areas. Like say a wireless router emits a signal, at the weakest point, the signal is boosted in a radius, at the boosted signal's weakest point, it's reboosted with another device, etc. I'm simply unaware as to how this could be done, but figure it exists. As my boss stated: How could airports have multiple access points, they couldn't just purchase these routers over and over and hook them up everywhere like this.
View 2 Replies
View Related
Apr 1, 2013
I have a home office with multiple VLANS/subnets I have many VPNs that connect only a specific subnet to a specific remote offfice. On a 5520, can I create a S2S VPN to different remote offices that have the same IP scheme, but from different home office subnets? For example at my home office let's say I have two independant, distinct VLAN/subnets: 192.168.140.0/24 and 192.168.150.0/24. Can I create an S2S from the 140 subnet to a remote office with a 10.10.10.0 addressing scheme and another S2S from the 150 subnet to a totally different office also with a 10.10.10.0 scheme?
View 1 Replies
View Related
Aug 17, 2012
I need to have 7 individual ethernet outlets on my home network for rooms, living room etc. My router has 4 ports on it. What should I do to get the additional 3 outputs I need? Can I just plug a switch into my router for the additional ones I need? Or do I need a router with additional ports?
View 4 Replies
View Related
Oct 14, 2011
I'm doing a college project and looking to triangulate a position where someone is standing in a building using information from at least three Wi-Fi access points. The building has computer labs that I can use. It also has just one Wi-fi signal. I want to know how I can turn one or two of the computers into a Wi-Fi access point that I can detect on my smartphone and differentiate it from the Wi-Fi signal that is currently in the building.Is there something that I can attach to a computer lab computer with possibly USB that will set up a Wi-Fi access point?or if I wanted, could I bring in a laptop and attach something to it in order to set up a Wi-Fi access point?In both situations, I want to use the Wi-Fi connection that is already in the building to create ' hotspots' that I can use so that I can get information from each.
View 1 Replies
View Related
May 17, 2010
home router is a wrt160n v3 With my iPad I set up the built in IPSec VPN to my office's cisco gateway. I successfully get the VPN logo. With an RDP app, i can access my work network from multiple public locations from my iPad. At home, on my laptop, I start the cisco client then use the windows rdp, presto i'm in my work network. At home on my iPad I can activate the VPN, but I can not connect with rdp. I spoke with linksys support tonight they had me add port 3389 to port range triggering and disable the firewall on the home router. This didn't solve the problem. To recap: 1) I can connect to my work network with rdp from multiple public locations, but not at home with the iPad 2) I can connect to my work network at home with my laptop with the cisco client ant the windows rdp
View 6 Replies
View Related
Feb 11, 2011
I am running AOL Desktop 9.1. When ever I start up it loads multiple home pages. How can I prevent this from happening?
View 3 Replies
View Related
Feb 28, 2012
I have an Metro network running ISIS to different locations. There are severals vrf's on different VLAN's with separate ISIS routing processes. ISIS is running in L2-Only There are two redundant hub routers (ME3600X) that are placed centrally.Connected to each of the ME3600X is an ISR2951 that connects to the internet and handling backup connections over DMVPN. Over those DMVPN tunnels I run MPLS over GRE and routing with BGP. The leaves are IBGP neighbours, and the central ISRs are route-reflectors. In those routers I redistribute from BGP to ISIS and vice versa. The IBGP has an admin distance of 200 and the ISIS route has 115, so in normal operations the ISIS route is installed in the FIB.
My problem is that when an primary connection goes down, I want the backup route via the DMVPN to be redistributed from BGP in to ISIS, and the traffic to go over the DMVPN instead. But what will happen is that when the ISIS route over the primary connection disapear both my ISR's will compete in advertising the route, and as one of the ISR's is advertising it the other one recives it and since ISIS distance are better it will prefer that one, and the other way around. So my routes are coming and going, and everything is unstable. With just one ISR, it works as it should.I tag the route redistributed in to ISIS, but there is no way to add a incoming distribute list to the interface of the ISR in ISIS, otherwise I might have stopped the route in to the ISR if it was advertised by the other ISR.
Also tried to put the ISR's in different L1 areas in ISIS and redistributed L2 to L1 in the ME3600X with an route-map filtering the routes learned from BGP from the ISR's. That works for failing over, but then I'm stuck on the DMVPN bacause when the primary way comes back again, the L1 learned from the ISR is prefered before the L2 learned from the neighbor over the Metro network.
I was thinking of extending the BGP in to the ME3600X, I could of course use EIGRP with distribute-list's between the ME end the ISR. [code]
View 2 Replies
View Related
Dec 22, 2012
i have a network at home where 2 Ethernet switches (denoted as #1 and #2 in the diagram below) are chained ,then 3 wireless access points is connected to the 2nd switch. family laptops want to access the internet using wireless access points. any problem with this configuration ?
View 2 Replies
View Related
Feb 12, 2013
I want to set up my own home wireless network for the first time. Also this is the first time I'm using wireless router.nd trying to set up the network.Currently, I have ADSL+ router device that is configured in route mode and it has PPPoE credentials stored, so until now, I use ethernet cable to connect it to the ADSl router and everything works fine (Automatic IP, DHCP on notebook). Notebook also has wireless adapter, so I bought asus wireles router.This was supposed to be an easy install. According to the instructions all I need is to use this ethernet cable to connect to WAn port on wireless router and to follow Quick set up instruction. But this quick installation procedure fails.When I try to figure out why, I came accross to the fact that existing ADSl router has 192.168.1.1 and this new asus WiFi has also 192.168.1.1
View 5 Replies
View Related
Nov 1, 2011
I'm setting up two separate 5510's at two seperate locations. The client wants two seperate SSL-VPN's; one for the HQ and one for the COLO location. They have a single domain for which I have added a-records to point to the corrosponding ASA's thusly: [code]
My questions is this: do i need to buy seperate certificates for each ASA/fqdn/IP combo? I'm using godaddy to buy the certs. If I do need to buy seperate certs, that makes the installation easier, but may waste $$. If I only need to buy one cert, how do I set it up so that both combo's are verified?
View 2 Replies
View Related
Apr 15, 2012
The problems looks like this: I'm able to browse the web without any problems until at random points of time - might be 2 hours after I turn on my PC or 5 or even half an hour the port 80 gets blocked - actually more like it hangs it self. As whatever I try to open i get "waiting for response" going and going. It's not even returning "page not found" error or anything. To top everything all other ports work fine - i can use https, ping run tracert - no problem there.
I've spend two days looking for some answer on the web but came up empty. I've scanned for malicious software with ad-awar and malwarebyte anit-malware - nothing came up. After restart of the pc everything comes back to normal but its frustrating needing to do that every now and then.
My home network looks like this: I have some broadband modem that is connected to local wifi TP-LINK router (Model No. TL-WR340G/TL-WR340GD). There are four devices using this connection - two pc's (laptops), android phone and android tablet.
View 1 Replies
View Related
Aug 3, 2011
I currently have one wireless router in my house. Of course its hooked up the the modem, but i also have it hooked up directly to my desktop considering the router is on the desk where my computer is.I recently moved to a new house.One of the rooms has a huge brick wall in it, unfortunately the computer is in that room.AND, its on the far left side of the house, so the other side of the wall barely gets any signal (Enough to work, but it bounces and only gets about 2 Megabytes Per Second, which is awful, because the router sends out 20 megabytes per second due to our internet plan.) Now, my room is all the way on the far right side of the house, in my room, i get barely any connection at all, 20% is normal in my room. I have my Playstation 3 in my room, so I had to wire an ethernet cable from the wireless router, up through the attic, to my PS3. I can now get 20 MBPS while playing video games. While that is great, i still don't have a wireless connection back there.
What i want to know is, can i plug in another wireless router to the ethernet cable in my room, sending out another signal. So basically, im plugging up a wireless router to another wireless router, and want them to both send out internet.I plan on getting a gaming laptop in December and will be playing it most of the time in my room. I need to know if this is possible, and if it is, how do i do it?First off, let me state that moving the computer or router in front of the brick wall is completely out of question.Also, know a lot of stuff about computers, but know almost nothing about networking.
View 7 Replies
View Related
Mar 9, 2012
I have a question regarding setting up a wireless access point on a network. Lets say my router is going to connect to a switch. The switch puts out 192.168.4. addresses. I want the wireless router to do the same. So I turn off DHCP.Everything works fine and everyone can communicate. Here is my question. How do I ever connect back to the wireless router if I need to change the settings? If the wireless routers address is 192.168.1.1 I cannot get back to it since i am now on the 4. subnet. I have also tried changing the router's ip to an address on the subnet such as 192.168.4.100 but on two different routers this didnt work. One didnt me and said there was a conflict with the WAN IP. The other one would not let me get on the internet.
View 1 Replies
View Related
Aug 29, 2011
We want to set up a wireless user group in our town between a few friends and new people who are interested to join. As far as I heard I don't need a ICASA License for the 5.8GHz Frequency if we are using it for a non profit orginization, so we may use that.
1 x Routerboard
3 x Radio Plugin Boards
3 x 120degree Antennas
to set up a 360degree HS (Highsite).Then at each person's house we will need:
1 x Routerboard
1 x Radio Plugin Board
1 x Whichever Antenna
Is that correct? Then also if we wanto run VoIP on our network, how do I do that? Basicly we want to use it for gaming, file sharing and VoIP. No Internet of anything else.
View 2 Replies
View Related
Dec 7, 2011
My boss just asked me if there was a way for him to move from point A to Point B with his wireless laptop and NOT have to reauthenticate at point B if I install another access point there. Right now I have us setup on a Cisco WAP4410N Access Point that works well when he's within range of the antenna. The point B location is upstairs and while it's only about 50-70 feet away from the Point A access point the signal he's getting there is very weak so he wants me to install another AP there.
IOW he wants to authenticate once at point A and when he walks up to point B he wants the laptop to pickup the newer hotter signal when I put another AP point in.
View 3 Replies
View Related
Jul 27, 2012
want to setup a small home network of about 10 PC's.I want them to share the internet connection of 25mbps.I also want Printer Sharing.
View 2 Replies
View Related
Nov 10, 2011
BTW the halls are next to each other.The house and the 3 halls are in the vicinity however not attached together(i.e. wall to wall). The distance between the house and the first hall is approx 1 road width distance.ISP is Virgin and the internet was installed this year hence has the latest Virgin Home Hub.I am aware that i probably require 3 wireless access points (1 for each hall).The first wireless access point will need to be connected with a RJ-45 cable running from Home Hub. Can i connect the Wireless access points up together or do they all need to come from the ADSL hub?I am not sure what Wireless access points would be best and how to go about connecting this all up
View 2 Replies
View Related
Dec 22, 2009
We have multiple Cisco Aironet 1131AG devices, all wired on one Cisco L2 switch(2560) who is connected to L3 switch (3550). We assigned one VLAN for access point in L3 switch who acts as vtp server (L2 switch is vtp client). All ap's will have static ip address and all will have same SSID and no security and they will be using multiple channels (ex. 1,6,11). They will operate in 3 floor building for roaming wireless client. We won't using any wireless controller.
How to configure APs-all the same with different ip's, can we use L3 switch to create dhcp server for access points VLAN (pool for clients, and the rest for static ip for ap's)?
View 2 Replies
View Related
Nov 20, 2011
What device would be necessary to link two networks of identical type? What devices would be necessary to link two networks of dissimilar types?I would say a network card and HUB for identical type but I do not know if this is correct?Describe the parameters governing the choice of cable type for a given network. What are the three main types of cables used in computer networks?
View 3 Replies
View Related
Jul 4, 2011
I have problem setting up wireless repeater using Cisco 1242AG access points. Here is the setup and problem - The location has 2 1242AG APs and a WLC (2206) which will be used by PDAs. One of the AP was converted to Lightweight AP and is wired. This AP is up and working and PDAs are able to connect to it. There is 1 WLAN and it uses Local EAP (LEAP) as authentication. Layer-2 security is configured as WPA/WPA-2 with 802.1X authentication. Under AAA servers Local-EAP is enabled and a profile (with LEAP enabled) is used. Local users are configured for login. As said PDAs are able to connect and it is working without any problem.
WLC (LEAP with local users) -----> LAP ----> Repeater AP
But the 2nd AP has to be configured as repeater was configured to repeater mode (refering to the document) and was placed. The WLC can see a client (with APs MAC address) but it is probing. The AP is still Automonous AP. Also username and password is configured for authentication. But still the radio on the AP is not up and it is in reset state.
View 1 Replies
View Related
Jun 17, 2011
I want to setup a VPN, probally more just for the experiance and to learn how to etc, but i also print remotely and view cameras remotely etc and i though it might be safer then port forwarding hundreds of different ports.First question, would it be better or safer to set it up in Windows XP or windows Server as i would have to purchase windows server. I have XP and windows 7. and, what exactly is a VPN. I have done some reading up, but was woundering how exacly i would for instance, remotely view my DVR (cameras) over a VPN. Also, i want the server to be a remote HDD to store and access all data remotely, Backing up etc. This i think VPN is more made for right?And, i will need a server (computer running at all times) to setup a VPN right? as where the router is always on and accessable. I can acheive this and i think this is what i need.So there it is, im new to this side of things done about all i can with the old router and looking at extending my knowledge. Also i wouldnt mind it being SAFE.
View 7 Replies
View Related
May 5, 2012
I want to set up VPN at home so my friends can access network shares on my LAN and stuff. I have used this tutorial:(url) ?v=1s5JxMG06L4&feature=related so users are set up, and port forwarding on router is done as well. I am using Windows 7 Ultimate, and VPN is set up on this machine. The issue is that my friends cannot connect to my VPN from another Windows machine. When they try to connect it is asking them for user and password but later on after authentication they receive error 720 which says connection could not be established. When I went to the network connections and then to the properties of VPN (incoming connections) it says no hardware capable of accepting calls is installed.
View 11 Replies
View Related
Jun 28, 2011
(i have 2 PCs (1 desktop and 1 laptop) both running Windows XP connected to my modem/router. the desktop is connected through a wireless adapter, and the laptop is connected directly using an ethernet cable. i have run Windows "Network Setup Wizard" on both PCs and they are part of the same workgroup with File and Printer Sharing enabled. this is as far as I've gone in setting up my LAN and everything works fine. i am able to see both PCs under My Network Neighbourhood and can access files from either PC just fine. both PCs are also able to ping each other by IP address and comptuer name.the problem is this only lasts temporarily. for some reason, after a random amount of time (anywhere between 1 hour to a few days) the desktop will "drop off" from My Network Neighborhood on the laptop. when i try to click on the desktop or workgroup in Network Neighbourhood i suddenly get the error "You might not have permission to use this network resource. Contact the administrator of this server to find out if you have permissions. The network Path was not found." after this happens i am no longer able to ping the desktop from the laptop either by the IP address or computer name.however I am still able to ping the laptop from the desktop by IP address and computer name, although in Network Neighbourhood the laptop can no longer be seen as part of the workgroup. I am still able access the laptop and its files from the desktop using the \*computer name* command and this will bring up the laptop name again in Network Neighbourhood.one more thing i noticed is, once I've pinged the laptop from the desktop i found that i can again ping the desktop from the laptop, but only with the IP address. If I try to ping the desktop by computer name it still times out. oweer, this also lasts temporarily... after a while, the laptop is also not able to ping the desktop IP address again.the only solution so far is to restart the router. once the router restarts and both PCs reconnect to it, then the LAN is working fine again... that is, until the problem above starts up once again! cry.gifmy modem/router model is D-Link DSL-2640B.some additional info:
- i've assigned static IPs to both PCs so they always have the same IP address from the router.
- i've tried disabling the built-in Windows firewall on both PCs but the problem remains.
- i do not have any other anti-virus or firewall programs installed.
- i've disabled "Computer Browser" service on the laptop so that the desktop is always the Master Browser.
View 5 Replies
View Related
Nov 12, 2011
We have a brand new Dell Insprion Q15R laptop which works fine apart from the fact that certain websites hang when we try to log on at home using our edimax router and we cant get into them. Other websites work fine. Also we have an old IBM laptop where all websites work fine. Its just the Dell that is playing up on certain sites. However if we go to somebody else's house and log on using their internet connection and router the websites in question work fine on the Dell.
Examples of the websites that we cant access at home and just hang are : argos, easyjet, national rail, expedia
View 2 Replies
View Related
Oct 11, 2012
I work in a small village in Africa and Interent access is often very unreliableTherefore I have 3 different ways of accessing the Interent from my home.The cheapest is Wifi from a local provider, but that doesn't always work. More expensive and still often unreliable is a 3G access. Then, when WiFi and 3G don't work I still can access the Internet via a Inmarsat BGAN satellite terminal, but that is very expensive.What I'd like do is to connect several computers to the same WiFi, 3G, BGAN Satellite Interent (all Ethernet) access via a home WiFi network.Now the questions I have:- can I just connect everything to a switch and then to the Wan-port of a wireless router?- how do the prioritisation works? When there is 3G available, I dont want to access the Internet via the BGAN, bacause that's too expensive?
View 2 Replies
View Related
Jul 24, 2012
I have a small home with two clusters of 2-3 devices which use the Internet - one ground floor, south corner, and the other top floor, north corner. I have a wireless router (Netgear N750) in the ground floor south connected to my cable modem. All devices in the area of the existing router are plugged into it (Cat5 cable). The devices in the top-north corner use wireless to communicate with the down-south router.
Running cable drops is not in scope for me, as we have a finished basement and I would have to blind drill horizontally across 50' of flooring and joists.
Tried running cabling through heat vents using a wireless camera mounted to a cable puller and all I did was discover some areas of my home that appeared to be four-dimensional. Attic not accessible in locations required for cable drops.Tried powerline devices and performance was much worse than wireless - I know that's a major YMMV situation but the Netgear ones I tried had like 5 Mbps connection rates. I also could not connect from other outlets - I have read if you had electrical work installed and have new lines run it can impact powerline performance. That may be the case in my home.
My questions:
A. I have OK to poor signal strength in top-north and top rate is ~ 150 MBps off what is supposed to be 300N router. Would I get better performance if I installed a wireless router in top-north and connected the top-north devices to it? Down-south performance is fine so it's not the cable modem/internet connection.
B. I believe I'd set top-north router up as a wireless client. I've experimented with Tomato and DD-WRT but don't know how to evaluate. Any tradeoffs I should know about?
C. Any networking changes I should consider if I go with such a topology? (MTU, who does DNS, etc). Currently use router as source for DHCP and DNS lookups. Should I limit which router wireless devices may connect with?
View 1 Replies
View Related
Jan 18, 2011
I have a small home network. My goal is to use Windows Server 2003 R2 to setup a DNS Server that can create a few simple names for some devices on my LAN, such as my printer. My DNS server will forward other inquiries (like google.com) to OpenDNS. Additionally, I don't want to setup a domain controller for my network. I wish to continue using workgroups,how to setup a Windows DNS Server on a workgroup. My biggest confusion is the FQDN of my name server. By default, it's setup as "server.", where 'server' is the name of my Windows Server 2003 machine. My workgroup is named 'Home'. So I tried 'server.home', but this does not resolve. What DNS suffix do my other machines on the network use by default? Is my domain name on the network really my workgroup name? Another thing I want to avoid is configuring a DNS Suffix for every single client machine on my network in their NIC properties for IPv4. I have a D-Link router, and if I do an "ipconfig /all" on my machine, I see that my DNS suffix is 'router', which is the name of my D-Link router. I try setting my DNS Server FQDN as 'server.router' and that doesn't work either, so I'm out of ideas.
View 1 Replies
View Related
Nov 30, 2012
I recently signed up for Centurylink Prism TV and internet, they use a Cisco DDR2200 (modem+wireless router combo) which I've come to realize is only a "g" router, so I purchased a cheap Belkin N150 (which I intend to use as my main router). I've turned the wireless function off on the Cisco and have an ethernet cable running from a LAN port on the Cisco to the internet port on the Belkin.
The issue I'm having is how do I set up the IP addresses/DHCP servers for both routers? By default, the Cisco's IP address is 192.168.1.254 (I know, weird right?) with a DHCP range of 192.168.1.63 - 192.168.1.253. Whereas the Belkin's IP address is 192.168.2.1 . I guess I'm sort of at a loss on how to set this up to optimize my network.
View 5 Replies
View Related
Aug 14, 2012
I want to start using a VPN and would rather have my own server for it so was going to buy a kimsufi 2g with ubuntu installed on it, Have been looking on the openvpn website but cant find any tutorials on how to setup openvpn on ubuntu.
View 1 Replies
View Related
Mar 4, 2012
I am buying a router with wireless soon and i am setting up an ADSL account.I only have one computer that will connect to this router.The router will be based in the living room area where the phone line is.My room (where the computer is situated) is quite far from the living room and i am not keen to drilling holes through roofs to wire some LAN cable.My plan is to use a wireless dongle in my pc to connect to the router for internet. Will this affect the speed of my downloads off the internet at all? will it be the same as if i was using a lan cable?I know file sharing over the network via WAN is slow but will my internet be?
View 1 Replies
View Related
