Home Network :: Create A Manual Route Into Laptop
Jun 6, 2012
My laptop have 2 NIC attach it, the cable NIC and Wireless NIC, the cable one connect to my lab network environment and the Wireless connect to office network environment (connect to internet) which both have differen segments [code] when my Wireless was turn off my pc can ping to all segment on my lab network environment, but if the wireless was turn on, i cant ping to others segment but only my laptop segment and i still could surfing to the internet without any problem.then i tried to add a new route from my laptop using "route add x.x.x.x mask x.x.x.x (gateway)" in command line and after that i can ping back to all segment in my lab network environment eventhough my wireless was onwhy i have to create a manual route into my laptop so that i can have connection between my laptop and my lab environment in the condition my wireless turn on ??
View 8 Replies
ADVERTISEMENT
Mar 22, 2011
I have the above router on 10.10.10.1 which I'm quite familiar with but I need reaching a VM residing on one of my internal MAC's. My cisco route table is as follows:
Gateway of last resort is 93.97.20.1 to network 0.0.0.0
93.0.0.0/21 is subnetted, 1 subnets
C 93.97.16.0 is directly connected, ATM0.1
10.0.0.0/24 is subnetted, 1 subnets
C 10.10.10.0 is directly connected, BVI1
S* 0.0.0.0/0 [1/0] via 93.97.20.1
The internal physical machine that contains the VM is 10.10.10.9 whose routing table is:
Routing tables
Internet:
Destination Gateway Flags Refs Use Netif Expire
default 10.10.10.1 UGSc 6 8 en0
10.10.10/24 link#4 UCS 5 0 en0
10.10.10.1 0:1b:2b:cc:7:8a UHLWI 7 1248 en0 284
10.10.10.9 127.0.0.1 UHS 0 86171 lo0
10.10.10.11 0:23:54:2a:6:d3 UHLWI 0 234 en0 150
10.10.10.30 0:9:34:28:60:2e UHLWI 0 25 en0 857
10.10.10.111 0:1d:ec:2:2d:2d UHLWI 1 1599 en0 721
10.10.10.255 link#4 UHLWbI 2 18609 en0
10.37.129/24 link#8 UC 2 0 vnic1
10.37.129.2 0:1c:42:0:0:9 UHLWI 1 2 lo0
10.37.129.255 link#8 UHLWbI 2 14046 vnic1
10.211.55/24 link#7 UC 2 0 vnic0
10.211.55.2 0:1c:42:0:0:8 UHLWI 0 2 lo0
10.211.55.255 link#7 UHLWbI 2 14046 vnic0
127 127.0.0.1 UCS 0 0 lo0
127.0.0.1 127.0.0.1 UH 5 214223 lo0
169.254 link#4 UCS 0 0 en0
The VM has a static IP of 10.211.55.5 and can obviously ping out to the rest of my lan but as of yet my router and other machines on the 10.10.10/24 subnet cannot reach the VM. I sort of presume this is a simple task of adding some kind of static route on my router and then all other machine will know how to get to the VM. So what do I need to do as I have about 40 or so customers already connected of whom I do not wish to suddenly halt their access due to my inexperienced attempts to create this route or new link(s)
View 1 Replies
View Related
Jan 8, 2013
I am trying to create a VPN on my Mac that I can access from my iPad in a remote location (work.) I have been using "iVPN" on the Mac to "distribute" the home Mac's Internet connection to the iPad. I have everything set up right and the VPN works fine and the iPad connects fine, just not when I am work, where I want it to work. The iPad tells me that it cannot connect to the VPN. I believe my work blocks VPN ports (1701, 1723 etc) I can do a google search from the iPad on the work WiFi so the connection is ok, but I believe those ports are blocked. If I connect the iPad to a restaurant's wifi for example, the VPN connects fine. What client can I use to create my own VPN at home where I can use a standard port like port 80 or something that is not blocked at work so that I can connect to the VPN from work?
View 10 Replies
View Related
Aug 21, 2011
I am using OPEN VPN in order to connect to a Canadian VPN server.I want ALL internet traffic to ONLY use the VPN connection and no traffic shall pass through my local ISP under any circumstance.In the event the VPN disconnects, I DO NOT want any internet traffic automatically sent via my LOCAL ISP connection. Can I simply disable my LAN network adapter in windows AFTER the vpn is connected? (since vpn uses its own TAP adapter?)
View 2 Replies
View Related
Aug 2, 2012
I have a home network using a 2600 and PIX515E, and unfortunetly I don't know how to set up ACLs. I read a few Cisco documentation but unfortunetly I am unable to grasp the concept of how to define them. Would anyone be able to give me a crash course on setting up ACLs?
View 3 Replies
View Related
Apr 17, 2012
I would like to create a network between my laptop and desktop PC so I can use the printer.
View 1 Replies
View Related
Sep 17, 2012
My desktop, which runs on Vista, is connected to the internet via a cable modem. I am trying to get my laptop, which runs on Windows 7, to connect to the same network without a router via the use of an Ad-Hoc network.
I have created the Ad-Hoc network on my desktop and have successfully connected to it through my laptop. The problem is that although I am connected to the Ad-Hoc network on the laptop I cant connect to the internet. It simply says Access Type: No Internet Access. I have internet sharing on and don't know what to do to successfully connect to the internet via the laptop. When I diagnose the connection it says "The network adapter does not have a valid IP configuration" I have both pcs set to "Obtain IPv6/v4 addresses automatically" and dont know what else to do.
View 2 Replies
View Related
Oct 11, 2012
I work in a small village in Africa and Interent access is often very unreliableTherefore I have 3 different ways of accessing the Interent from my home.The cheapest is Wifi from a local provider, but that doesn't always work. More expensive and still often unreliable is a 3G access. Then, when WiFi and 3G don't work I still can access the Internet via a Inmarsat BGAN satellite terminal, but that is very expensive.What I'd like do is to connect several computers to the same WiFi, 3G, BGAN Satellite Interent (all Ethernet) access via a home WiFi network.Now the questions I have:- can I just connect everything to a switch and then to the Wan-port of a wireless router?- how do the prioritisation works? When there is 3G available, I dont want to access the Internet via the BGAN, bacause that's too expensive?
View 2 Replies
View Related
Mar 13, 2011
I have been having a bit of trouble with networking my two machines to share files and allow printing i have a win 7 laptop and a xp home desktop. I share a net connection via 02 wireless box both systems have wireless i have tried many things
View 8 Replies
View Related
Jun 21, 2012
is it possible for a client to choose a WAN to use when being routed through a Multi-WAN router? Something that could be configured as default route in linux or default gateway in winxp ?Or is this decision totally up to the router itself ? [code] Could now a client on the subnet 192.168.0.0/24 choose 1.1.1.1 as a default route for example? And if not, could this be possible if the router hat some secondary internal IPs for both WAN interfaces.
View 3 Replies
View Related
Oct 18, 2011
I don't think I ever set up my laptop for home WIFI. There is only one choice, (being Belkin) in Home Group and would like to take my puter to another room in my house using my WIFI modem occasionally. It did work fantastic at a friends house hooking up to their WIFI. I have been looking for a manual to download, but can't seem to find one on line or at the Acer home page.
View 1 Replies
View Related
Sep 27, 2009
I'm trying to create a route from a VPN ip to the VPN server in my LAN. Anyhow, the DIR-655 does not let me create routing within the LAN (since only the WAN interface option is available).I have tried with the following firmwares: 1.11, 1.21, 1.30.
View 8 Replies
View Related
Jan 26, 2011
I am trying to create a static route on the TP-Link TD-W8950ND router, however am a little confused about the interface I should use. The default gateway on the route is another router on the LAN. I have a choice to use interface pppoe (telstra), LAN/br01 (bridge) or no interface. I was assuming I didn't need to use any interface as this is not a bridge setup and is on the LAN, but when I select "no interface" it doesn't save the static route settings.Also, when I select LAN/br01, the routing saves but doesn't actually work (tracert shows not going through the right router).
View 1 Replies
View Related
Jan 8, 2013
I'm experimenting/attempting to use a laptop as a network tap between my (DSL) modem and a wrt54gs by creating a bridge with two NICs in the laptop. My problem is I can't seem to get connectivity on the user end of the router. I can't ping the bridge from an end computer...
DHCP is disabled in the router, but even when manually configuring the IP address on an end computer and using the bridge as a default gateway I can't ping out.
Am I completely misunderstanding the purpose of a NIC bridge?
View 1 Replies
View Related
Oct 30, 2012
I have a Dell Optiplex running XP wired to a Netgear router. My laptop is a Dell Inspiron 1501 running Windows 7. When I got the new router everything programed easily and I could retrieve files from my desktop and print remotely. Sometimes I would have to "refresh" before the laptop would detect the desktop but now it will not detect the desktop or the printer. I suspect that a Microsoft Update did this but just guessing. I went back and deleted the updates that downloaded around the time that this stopped working. I have tried every thing that I can think of to get it back working but can not get it fixed.
View 2 Replies
View Related
Apr 26, 2012
I'm trying to create a route-map for an EIGRP Distribute list on a N7K, the goal is to not advertise a 10.0.0.0/8 and 172.31.30.20/32 networks out a link to a remote site while permitting all other traffic to the internet (default). I configured the ACL/route-maps below and applied them outbound on the N7K interface but no subnets at all are being received on the remote site router.
ip access-list DENY_10.0.0.0
10 permit ip any 10.244.244.20/30 <<--WAN interface network
20 deny ip any 10.0.0.0/8
25 deny ip any 172.31.30.20/32
30 permit ip any any
[code]....
View 0 Replies
View Related
Feb 23, 2011
My Compaq laptop (Vista) was working just fine last night, connected to my home wireless network all right and all. Today morning my laptop couldn't detect my home wireless network at all, but it could still detect a bunch of other networks from the neighbours. My iPhone can detect my network with no problems, my desktop computer is wired up to the router, works fine too. It's a D-Link DIR-655. This has happened before but usually gets solved when I reboot (switching off and on) my router. I've tried that, tried restarting my computer too, no use. Haven't tried anything beyond that because I'm an idiot with computers.
View 1 Replies
View Related
Apr 2, 2012
Having problems with my wife's laptop. It is connected to our wireless home network - but every so often (and it seems to be happening with increasing frequency), the connection breaks right in the middle of whatever she is doing. The laptop has to be restarted in order to reestablish the internet connection.
This problem has happened at other people's houses when we were connected to their wireless - so the issue appears to be with the laptop and not with the setup of our wireless network.
View 5 Replies
View Related
Jan 16, 2012
I live in a house with six other students and all of their laptops can pick up the signal of our home network, but yesterday mine suddenly stopped. I've tried uninstalling the network adapter (after the common sense stuff), which appeared to fix the problem as I could detect the network but then when i tried connecting the message said windows was unable to connect to the network. I've also tried all the stuff I found on threads here but nothing appears to have worked
View 1 Replies
View Related
Sep 12, 2012
My laptop can no longer connect to my home network. It used to connect fine, but I was having problems with my graphics card as every time I went on Youtube it would crash. As a result, I sent it into ASUS (it is an ASUS K52J Series) and got the motherboard and the hard drive replaced. After this, my laptop seemed to be working great. It connected to a variety of networks, including 3 home networks, and 2 public networks. However, it cannot connect to the network in my apartment.
I know this network works and is connectable as my roommate's laptop works perfectly fine. So I know it is not a problem with my laptop since it connects to other networks, and I know it is not the network since other laptops connect to it. I've tried resetting my adapter, I've tried turning off the firewall. Also, I've tried the trouble shooting option numerous times after trying a variety of things that usually fix the connectivity, but it always says that the problem cannot be detected.
It's starting to be really frustrating, especially since I'm in university and sharing a laptop when both my roommate and I need to do work is not convenient.
View 6 Replies
View Related
Nov 6, 2012
I want to set laptop 1 at home music receiver location. laptop 1 will be used to play music and play music from web over home stereo. I want to be able to access laptop 1 from other devices, iphone 5, other laptops and have the ability to remotely change the music.Laptop 1 can be connected via network cable or wireless to wireless home modem.
View 3 Replies
View Related
Feb 12, 2012
i want to create a trunk between 4507 & 3945E router & route two vlans from router 3945E
4507# vlan 99 & 51
# int vlan 99
# ip add 10.22.100.1/24
#int vlan 51
# ip add 10.22.103.1/24
[code].....
4507 version : IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSAL-M), Version 03.02.00.SG RELEASE SOFTWARE (fc4)
3945E: 15.1(2)T4 what I am missing?
View 3 Replies
View Related
Jun 28, 2011
I want share my adsl internet connection to my galaxy tab and use labtop wirless as a access point. in toturials there is settings in wirless newworks tab in wirless propertice,but I cant found this tab. I installed lastest Wirless driver update and start WLAN autoconfige service. also I cant found microsoft virtual wifi in network connetions.
Intel wifi link 5100 AGN
Windows 7
View 1 Replies
View Related
Aug 19, 2011
My desktop is not accessible from my laptop in my home network. This seemed to happen all of a sudden.Contact the administrator of this server to find out if you have access. PS: I can access the laptop from my desktop.
View 14 Replies
View Related
Feb 10, 2011
How to connect laptop with a home network without using a cable??
View 1 Replies
View Related
Apr 7, 2012
I am using an HP G50 vista 32bit. Suddenly my laptop does not detect the wireless automatic home network which its connected to everytime. It detects all other available networks (around my home) but not the one at home. All other devices (other laptop, my iphone) are successfully connected to the network. I have tried resetting the modem, restarting laptop, no updates , no adapter updates.
View 1 Replies
View Related
Feb 23, 2011
What do I need to connect to my office network when want to work at home from my laptop.
View 1 Replies
View Related
Nov 13, 2012
Local Access Only on Vista PC
I restored an old Vista laptop to out-of-the-box state to give to my Dad. This laptop had a wireless connection to the internet and network previously. After the restore, I can't get a connection to the internet, even though my router sees it and it has an ip address. It says Unidentified Network Local Access only, and it doesn't see any of the computers on the network. Sometimes the other computers see it but can't connect, sometimes, the other computers don't see it. I hate Vista.
Stats on Laptop:
Toshiba A215-S4747
Atheros AR5007EG
All my other eight devices have an internet connection no problem, but I powered off the modem and router a couple of times with no change. I tried updating the Atheros to the latest driver on Toshiba's website for this model, but it doesn't seem to take. If I uninstall the old drivers, Windows rudely just immediately reinstalls them again. If I just update the driver, and pick the new file, the driver version remains the same as the previous driver. I'm banging my head on the wall with the driver
Ping successful on:
192.168.1.11 (the laptop's IP address)
localhost
[Code]......
View 11 Replies
View Related
Apr 9, 2011
Just got an HDTV, has a load of fancy internet stuff, but only has a wired connection and I can't put my router in this room, and would rather not have to run a wire up from downstairs.
I'm guessing there is a way of connecting to the wireless on my laptop in this room, connect the laptop to the tv via an ethernet cabe, and bridge the connections or something so that my tv gets the internet from the laptop. That's gotta be possible, no? When I try it tho, the connections bridge, but the tv says "Gateway is not connected, gateway address wrong or unavailable". Using auto IP.
View 8 Replies
View Related
Jul 25, 2011
I have a HP G62 Laptop that's less then a year old (replacing a Dell we had for several years without problems) and a 2Wire router with ATT DSL that we've also had for years. Ever since we've had the new laptop we've been unable to use the wireless without problems. Periodically, (maybe once an hour or so) if the laptop is connected wirelessly it will make the router disconnect from the internet and cycle off. The router lights all go red, it cycles back on, green lights come on and re-connects.I've had ATT run a line test, had them send technicians here 3 times, they've gone through the house and followed the line to the box, trimming branches on the way. I've gotten a new router and I've tried a USB wireless adapter for the lap top. However, as soon as the wireless is disabled and it's plugged in by ethernet all of the problems go away. This would be fine if it was mostly used at a desktop but it's mostly used on the couch/around the house and the ethernet cables get in the way and keep breaking.
View 3 Replies
View Related
Aug 17, 2011
I have some servers running in my office and I have hooked them to a wireless router. I want to access those servers from my work laptop. At this time, I have to disconnect from my company network and assign static IP to wireless interface to access those servers. is there a way to configure my laptop so that i can be hooked to my company network through wired interface and can access my servers through wireless interface which is configured with static IP
View 9 Replies
View Related
Sep 26, 2011
I've recently bought a laptop with Windows 7 and would like to be able to connect to my existing home network which comprises 2 desktop PCs connected via a Dlink wireless N router which is acting as a WAP to my Billion non-wireless router (which the two desktop PCs are connected). ie the two desktops are connected via wire to the Billion. The DLink is just there to provide wireless for my laptop (and Ipod)
The first day I setup the new laptop it seemed to recognise the C drive and G drive on my desktop (which I had set to 'share'). i was able to do file transfers.
However, the next day, and since then, the C and G drives don't show up on when I click 'network' on my Laptop's Win Explorer... They did reappear once after I refreshed the Win Explorer several times, but that trick didn't work again
Internet is working fine on all computers. Just would like to be able to share files across the 3 machines...
I've experimented on the laptop with setting as 'public', 'home' and 'work' but didn't have any luck.
View 4 Replies
View Related
Feb 13, 2011
I am having internet connected to my Desktop with Win XP. Internet mode is Wireless Data Card that can be inserted into USB port. Now I have a laptop with Windows Vista Home Premium. I was able to connect both of them using ethernet cross over cable and successfully enabled file sharing through Local Area Network. But I want to access Internet from the laptop. Is it possible?
FYI, when I typed ipconfig in cmd prompt in desktop,
PPP adapter High Speed Data:
Connection-specific DNS Suffix . :
[Code].....
View 2 Replies
View Related
