Cisco VPN :: ASA 5505 To Create Web Server That Only Some Ip Address Can Access
Feb 21, 2013we have a cisco asa 5505 and it working great .i want to create web server that only selected public ip address can access.
View 3 Replies
ADVERTISEMENT
Cisco Firewall :: Access Windows Server From Outside Address With ASA 5505
Oct 6, 2011I just purchased a domain name, that I have forwarding to my WAN address. I want to be able to access my home websie via this route. I have an ASA 5505, how do I get the ASA to point to the home server when the WAN IP address is entered?
View 16 Replies View RelatedCisco Firewall :: ASA 5505 / Create A Static Ip Address Under Version 8.4?
Mar 20, 2012I just upgraded my firewall to ASA 5505. Now, my original static ip address cofiguration is gone. Apperantly, Cisco went away from static ip address to something like nat (inside,outside) dynamic interface. how to create a static ip address under version 8.4? By the way, I am sharing what my configuration used to look before upgrading.
!
hostname cisco-asa
domain-name default.domain.invalid
names
!
interface Vlan1
nameif inside
security-level 100
[code].....
Cisco Firewall :: ASA 5505 - Create Public Server For DVR Cams?
Apr 19, 2012I'm trying via the ASDM to port forward http connections to a DVR for the purpose of viewing IP cams.I've tried via ASDM to create a public server but I'm not allowed to use my public IP address for the public Interface.I have only one public IP address available.Is there any way round this ? I would also like to know how I can enable NAT with PAT.I've tried setting the outside Interface for use with PAT but It keeps reverting to the setting for a range of external addresses.I'm not really used to the ASA cli yet , I'm getting there.If there's a workaround via the CLI , I'll take that route.
View 4 Replies View RelatedCisco :: Asa 5505 - Create A (remote Access Vpn) Setup For Ipsec?
May 8, 2012I have a newly aquired asa 5505 that I just set up to the bare minimum configurations. I followed a cisco paper on how to create a "remote access vpn" setup for ipsec. I can sucessfully connect and establish a VPN, but when I try to access an inside resource from the vpn address, the asa blocks it.
Specific error is: Code...
Cisco VPN :: ACS 5.2 Create Static IP Address User For Remote Access
Sep 15, 2011At first I use ACS 4.2 to create static ip address user for remote access VPN,It's easy,just configuration it at user set>Client IP Address Assignment>Assign static IP address,but when I use ACS 5.2 I can't find it.I try to add IPv4 address attribute to user by read "ACS 5.2 user guide" ,it says this: [code] I do this,but it's not work.When I use EasyVPN client to connect ASA 5520,user could through authentication but will not get that static IP address which I configuration on Internal Users.so,what should I do,if anyboby knows how to use ACS 5.2 to create a static ip address user for remote access VPN.
View 2 Replies View RelatedCisco Firewall :: ASA 5505 - Create Access Rule To Connect To System Using RDP?
Mar 6, 2012Just started using our ASA 5505 v8.2 (1) Trying to configure the ASA appliance to allow access into an internal resource (i.e want to be able to RDP into a system behind the ASA from the internet).I have used a static NAT:
static (inside,outside) 100.100.100.2 192.168.1.28 netmask 255.255.255.255
access-list OUTSIDE extended permit tcp any host 100.100.100.2 eq 3389
When I view the logs it is reporting the following:Inbound TCP connection denied from 206.100.100.1 (external IP) to 100.100.100.2 /3389 flags SYN on interface outside.Been pulling my hair out with this one as I believe I have everything configured correctly.
Cisco AAA/Identity/Nac :: Use ACS 5.2 To Create Static IP Address User For Remote Access VPN
Sep 17, 2011At first I use ACS 4.2 to create static ip address user for remote access VPN,It's easy,just configuration it at user set>Client IP Address Assignment>Assign static IP address,but when I use ACS 5.2 I dont't know how to do it.
I try to add IPv4 address attribute to user by read "ACS 5.2 user guide" ,it says this:
Step 1Add a static IP attribute to internal user attribute dictionary:
Step 2Select System Administration > Configuration > Dictionaries > Identity > Internal Users.
Step 3Click Create.
Step 4Add static IP attribute.
Step 5Select Users and Identity Stores > Internal Identity Stores > Users.
Step 6Click Create.
Step 7Edit the static IP attribute of the user.
I just do it,but it's not work.When I use EasyVPN client to connect ASA 5520,user could success to authentication but will not get the static IP address which I configure on Internal Users,so the tunnel set up failed.I try to Configure a IP pool on ASA for ACS users get IP address,and use EasyVPN client to connect ASA , everything is OK,user authenticate successed.but when I kill IP pool coufigurations and use the "add a static IP address to user "configurations,EzVPN are failed. how to use ACS 5.2 to create a static ip address user for remote access VPN?
Cisco Firewall :: Create Static PAT To Allow Host Address To Access Network Through ASA5510
Aug 23, 2012The old syntax that I am much more familiar with has been deprecated. On older IOS it would have been something like static (inside,outside) tcp 209.114.146.122 14033 192.168.30.69 1433 netmask 255.255.255.255 Plus an extended ACL to allow the traffic.I am trying to create a Static PAT to allow a host address to access our Network through an ASA. I have external address 209.114.146.122 that I want to hit the external interface on an obscure port (say 14033) and translate that traffic to an internal host address on port 1433.
View 11 Replies View RelatedCisco Firewall :: ASA 5505 / How To Use A Host Instead Of IP Address For A NTP Server
Jul 8, 2012Instead of using a IP address I would like to use a host address that points to a NTP pool.An example would be:ntp server 0.north-america.pool.ntp.org Can this be done on the ASA series?
View 1 Replies View RelatedCisco VPN :: 5505 How To Change EasyVPN Head-end Server Address
Jan 19, 2012We have a number of 5505 ASAs at remote sites all of which are configured to connect to one of two head-end servers.We need to change the primary head-end IP addresses. At the moment devices are successfully connected to the secondary.If we issue vpnclient server i.j.k.l e.f.g.h then the device drops off the network and won't reconnect until it is power cycled.If we make the changes in ASDM using the GUI to remove the old primary and add in the new primary the ASDM says "No changes made".Devices are running 8.2 and 8.4 code and behaviour is the same.
how to change head-end server IP addresses without the device disconnecting and not coming back up? According to the configuration guide the ASA should cycle through the addresses every 8 seconds until it can connect - but it doesn't seem to do this as it won't connect to the good secondary head-end either!
Cisco VPN :: When Try To Access Inside Resource From VPN Address ASA 5505 Blocks It
May 8, 2012I have a newly aquired asa 5505 that I just set up to the bare minimum configurations. I followed a cisco paper on how to create a "remote access vpn" setup for ipsec. I can sucessfully connect and establish a VPN, but when I try to access an inside resource from the vpn address, the asa blocks it.
Specific error is:5 May 09 2012 15:17:48 305013 192.168.1.2 80 Asymmetric NAT rules matched for forward and reverse flows; Connection for tcp src outside:192.168.1.220/53101 dst inside:192.168.1.2/80 denied due to NAT reverse path failure
Here is my config.
: Saved:ASA Version 8.2(2) !hostname asawooddomain-name wood.localenable password W/KqlBn3sSTvaD0T encryptedpasswd W/KqlBn3sSTvaD0T encryptednamesname 192.168.1.117 kylewooddesk description kyle!interface Vlan1nameif insidesecurity-level 100ip address 192.168.1.1 255.255.255.0 !interface Vlan2nameif outsidesecurity-level 0ip address dhcp setroute !interface Ethernet0/0switchport access vlan 2!interface Ethernet0/1!interface Ethernet0/2!interface Ethernet0/3!interface Ethernet0/4!interface Ethernet0/5!interface Ethernet0/6!interface Ethernet0/7!boot system disk0:/asa822-k8.binftp mode passivedns server-group DefaultDNSdomain-name wood.localobject-group service rdp tcpdescription rdp accessport-object eq 3389access-list outside_access_in extended permit tcp any interface outside eq 3389 access-list outside_access_in extended permit tcp any interface outside eq 8080 access-list outside_access_in extended
[code].....
Cisco Firewall :: ASA 5505 / Can't Access Web Server
Jul 9, 2012We have a Cisco ASA 5505. As of yesterday we could no longer access our web server (the web server is hosted off-site). Pinging the DNS address and direct IP (from the firewall and a PC) both return no response. Pinging the IP from the T1 router responds properly, meaning the router can access the web server, but the firewall cannot. Accessing the web server has never been a problem, and no configuration changes have been made to the network/firewall. Other locations can access the web server just fine.
View 1 Replies View RelatedCan't Access Router Address / Server
Feb 2, 2013i have trouble accessing 192.168.0.254 for setting up my device. it says cannot access server.
View 1 Replies View RelatedCisco Firewall :: SQL Server Access From DMZ Interface ASA 5505
May 25, 2011I would like to allow users from network 10.132.23.0/24, 10.132.33.0/24, 10.132.24.0/24 access to our SQL server(192.168.1.7) located on the inside interface(192.168.1.0/24 network) Those networks (10.132.0.0/16) come from the DMZ interface.
View 12 Replies View RelatedCisco Firewall :: 5505 - Construct An Access List For Outside Interface Using External Address?
Sep 10, 2012I'm configuring a 5505 for a remote office. Until they are assigned a static ip by the provider I will have to use the providers dhcp address. How do I construct an access list for the outside interface using the external address if I don't know it yet? is there a commnd that will insert the ip address in to the access list once one is assigned?
View 5 Replies View RelatedCisco Firewall :: ASA 5505 8.4(2) Allow User To Access Internal Www Server?
Aug 2, 2011I tried the solution posted at [URL] however it did not work on my ASA5505 8.4(2). I thought that it may be because I only have a single public address so the web server is responding to port forwarding through the one public IP already. looking in ASDM it appears to indicate that a configured access list is blocking the server from responding to the internal hosts.
object network Private_IP
host 192.168.1.15
object network Public_IP
host 1.1.1.1
object-group network internal_net
[code]....
Can I fix an access list (or something) to make this work or am I wishing for too much with only one public IP? This worked by default on my Netgear firewall.
Cisco Firewall :: 5505 Configuring RDP Access To Local Server
Jun 10, 2012I need configuring RDP access to my local server from a remote location on my Cisco ASA 5505 Firewall.I have attempted to configure rdp access but it does not seem to be working for me. How to modify my current configuration to allow this? I need to allow the following IP addresses to have RDP access to my server: [code] The other server shows up as 99.89.69.334 but is working fine.
I already added one server for Static route and RDP but when I try to put in same commands it doesnt allow me to for this new one. My configuration file and what are the commands i need in order to put this through. Also, if there are any bad/conflicting entries. Also I have modified IP information so that its not the ACTUAL ip info for my server/network etc... lol for security reasons of course.Also the bolded lines are the modifications I made but that arent working. [code]
Cisco VPN :: Allow Remote Access To Windows Server Through ASA (5505) Firewall
Jul 13, 2011I would like to allow remote access to a windows server through a ASA (5505) firewall. Users will use the vpn connection in order to connect to a private network. Is there any link that describes the steps for ASDM?
View 3 Replies View RelatedCisco Switching/Routing :: 1841 - Access To Web Server On Outside Address From LAN
Jan 22, 2012I have a 1841 deployed as my NAT device towards internet. NAT is setup so that internal addresses can access WWW. I also have some NAT translations opening speciic ports from outside to inside in the form: ip nat inside source static tcp A.B.C.D 443 A.B.C.D 443 extendable.
Now have an outside address/port setup with a public DNS reference and using NAT from outside to get access to the corresponding inside address. It works when being outside the LAN.
Now to the problem: From the LAN side of the router - i cannot access the public name. I can ping it - but my browser dont find the webserver behind the name. Someone told me it should be setup as "local firewall domain" - and i should set this up as "source NAT".
Cisco Firewall :: Setup ASA 5505 Access Or NAT Rules To Inside Server / IP Cam
Oct 25, 2012I'm having trouble setting up the correct rules on an ASA 5505 I'm using in my home office. I have a couple of IP Cams I need to access remotely.
I've tried setting up simple NAT(PAT) and/or Access Rules, but it hasn't worked. I have a single dynamic IP for the Outside interface. Call it 77.76.88.10 and I am using PAT. The CAM is setup to connect on port 80, but could be configured if necessary. I've tried setting up NAT Rules using ASDM as follows:
Match Criteria: Original Packet
Source Intf = outside
Dest Intf = inside
[Code]....
I'm afraid to use CLI only because I am not confident I'll know how to remove changes if I make a mistake.
Cisco VPN :: 5505 How To Forbid Remote Access Vpn Client To Use Local DNS Server
Oct 4, 2012I am configuring remote access vpn on ASA5505.Everything is working fine so far, except when the client got connected, it still used the local DNS server provided by the ISP. How do I force the client to use the DNS server configured on ASA?
View 7 Replies View RelatedCisco Firewall :: 5505 Server Looses Network Access When Vpn Is Active
Sep 27, 2012When I start a VPN-session my server looses internet access. The server is host for a few virtual machines and they have internet access.using 5505 and asa is version 8.4(2). [code]
View 6 Replies View RelatedCisco Firewall :: 5505 Access Websites Hosted On Local Web Server
May 4, 2013I have a Cisco ASA 5505 in my home office which has a few PCs behind it with a linux web server running some websites. I can access the websites from outside no problem (i.e. on my iPhone using a 3G connection). However, I struggle to access the websites from within the network. The ASA gives me this error: [code]
View 3 Replies View RelatedCisco Switching/Routing :: 3750 / Access A Target Server With IP Address 10.2.2.13?
Oct 16, 2012Today when we run one applcation to access a target server with IP address 10.2.2.13, the application cannot run through and appearing error message related networking.The target server has two network ports whereby another one with IP 10.2.2.14 is running OK with the same application. All these two connections are connected to the same Cisco switch 3750, after the switch then go to Cisco ASA firewall which has no access control rule for this 10.2.2.13 and its subnet, and then the firewall connect directly to the application server.We can ping, remote desktop access and telent port for the application to the target server by using 10.2.2.13.We swapped the cable connection of the ports from one another and try the application again, the IP with 10.2.2.13 is still fail and IP with 10.2.2.14 is OK.We then change the IP from 10.2.2.13 to 10.2.2.12 or 10.2.2.155, all are OK. We changed back to 10.2.2.13, it is failed again.The switch is in running real time production and so we cannot power cycle or reload the switch.
View 9 Replies View RelatedCisco Application :: ACE 4710 Configuration - Client / IP Address Access For Web Server
Oct 15, 2011I want to use one arm infrastructure of ACE4710. But I remember it was problem for back end server can not get logging for which client/ip address access the web server.
View 3 Replies View RelatedCisco Firewall :: ASA 5505 Sec - Can't Create More Than 3 Name
Jul 24, 2012on my Active/Stanby ASA5505 has Sec+ License(trial), I can't create more then 3 nameif interface however,
Licensed features for this platform:
Maximum Physical Interfaces : 8 perpetual
VLANs : 3 DMZ Unrestricted
Dual ISPs : Enabled perpetual
VLAN Trunk Ports : 8 perpetual
Inside Hosts : Unlimited 17 days
Failover : Active/Standby 17 days
VPN-DES : Enabled perpetual
VPN-3DES-AES : Enabled 17 days
AnyConnect Premium Peers : 2 perpetual
Cisco Firewall :: Can't Create Subinterface On ASA 5505?
Jul 11, 2012I have a Cisco 5505 with a security plus license and but I can’t seem to create sub interfaces on it.
ASA1(config)# sh ver
Cisco Adaptive Security Appliance Software Version 8.2(2)4Device Manager Version 6.0(3)
Compiled on Wed 03-Feb-10 14:17 by buildersSystem image file is “disk0:/asa822-4-k8.bin”Config file at boot was “startup-config”
ASA1 up 1 day 18 hours
Hardware: ASA5505, 512 MB RAM, CPU Geode 500 MHzInternal ATA Compact Flash, 128MBBIOS Flash Firmware Hub @ 0xffe00000, 1024KB
[code]....
Cisco VPN :: 5505 Create VPN Tunnel Between Two Offices
May 27, 2011I have two cisco ASA 5505 devices and two cisco switches plugged to ASAs in each office. I need to create a VPN tunnel between two offices.
-Network behind the ASA1 in office1 is 192.168.1.0/24 with DHCP server – 192.168.1.10
-Networks behind the ASA2 in office2 are 192.168.5.0/25; 192.168.5.128/26 and 192.168.5.192/26
All computers in office2 need to get IPs from DHCP server 192.168.1.10. I have switch in office2 with 3 VLANS and I can assign computers from different subnets to different VLANs.How can I archive this goal? Should I assign 3 IPs for ASA2 inside interface (192.168.5.1, ...5.129, ...5.193) as a default gateways for each subnet? Should I put dhcp helper address 192.168.1.10 on the switch for each VLAN?
Cisco Firewall :: Create A Backup ASA 5505?
Jun 12, 2013I have a production ASA 5505 that is working perfectly. I wanted to take a spare ASA 5505 and copy the running config to it so that I would have a backup unit that could be swapped out if the production unit went down.
Both units have security plus and running 8.2(1). The only difference is that the production ASA has 512MB of RAM while the backup ASA has 256MB. Also the backup has anyconnect and the production unit does not.
I copied the running-config to my tftp server and then copied the running config from my tftp server to the backup ASA as startup-config. After reload the device booted with an identical configuration to my production ASA, but after swapping out the units to test it, I have no access to the WAN or DMZ from my LAN. Swapping back to the production unit and all works as it should.
I printed out the running config from both devices and compared them line by line. They are identical except for the anyconnect line on the backup ASAs config file.
Cisco Firewall :: ASA 5505 To Have Internal Address That Wish To Forward From External Address
Jul 8, 2012I have an old ASA 5505, and I'm having some trouble with Nat Hairpinning. I've done this with other firewalls before and I am having no luck now. I have an internal address that I wish to forward from an external address- so if someone goes to 123.456.789.012:3456 then it will forward to 192.168.1.244:92 (All numbers are arbitrary here- only for illustration). I have and Access Rule and NAT and PAT set up so that I can get in if I originate from outside the LAN. What I am trying to do is to have this work from inside the LAN as well- so that if I am at my desk, and I connect a device and type in 123.456.789.012:3456, it will deliver the content at 192.168.1.244:92. The problem I am having is that it just isn't working, and I cannot figure out why- When I started here, there was an address configured to work this way, and it still works- I just cannot find what is different between what I am doing and what the person who configured it did.
View 7 Replies View RelatedCisco Firewall :: Can't Create Network Objects On ASA 5505
May 17, 2011I have a customer an exisiting 5505 which connects to multiple sites for a site-to-site VPN. This firewall was not installed by myself originally I have just been asked to take a look now.The situation is that we now need to edit one of the existing site-to-site VPNs to include the remote sites expanded network. I have tried doing this through the ASDM and have found that I cannot add new network objects. I have tried creating a new network object group and then added the new networks from there but I am completely unable to add the new objects.I believe a picture tells a thousand words in this case so I have attached some images which show the problem. I have also tried going through the VPN wizard, this also does not allow me to add new network objects.
View 2 Replies View RelatedCisco Firewall :: ASA 5505 - Create ACE For Range Of IP Addresses
Nov 7, 2011trying to configure our ASA 5505 (hence my request for the ASDM). However, I can go CLI if push comes to shove.
What I'm trying to do is allow a range of IP addresses on the inside interface (those which the DHCP server is doling out IPs which are XXX.X.XXX.14-140) to access email only (which is hosted offsite). They still need to access the file servers which are on the inside but nothing should be going out to the internet other than email.
I believe I have to create a Network Object which contains the IP range I wish to restrict. I can see where I add the Network Object but I don't know what the syntax should be to specify the address range.
I'm also not sure what the sequence of the ACLs should be and whether or not I can keep the default Access Rules in place. There are the two implicit rules: 1) Permit any traffic out to less secure networks 2) Deny any traffic to anywhere (which is superceded by rule 1, yes?)
To create an Access Rule like the one I desire, do I need to move the two existing rules down the list so that the new one will supercede both implicit rules?