Cisco Firewall :: ASA 5505 8.4(2) Allow User To Access Internal Www Server?

Aug 2, 2011

I tried the solution posted at [URL] however it did not work on my ASA5505 8.4(2). I thought that it may be because I only have a single public address so the web server is responding to port forwarding through the one public IP already. looking in ASDM it appears to indicate that a configured access list is blocking the server from responding to the internal hosts.
 
object network Private_IP
host 192.168.1.15
object network Public_IP
host 1.1.1.1
object-group network internal_net

[code]....
 
Can I fix an access list (or something) to make this work or am I wishing for too much with only one public IP? This worked by default on my Netgear firewall.

View 4 Replies


ADVERTISEMENT

Cisco Firewall :: Internal DNS Server Entry ASA-5505

Jan 12, 2011

I have a client in a workgroup environment. They are a small company with perhaps twenty systems. Their infrastructure consists of a Dell Switch, a Cisco ASA-5505 which hands out the DHCP and a router. And that's that.They have been using an external IP as their DNS Server to get out to the Web. However, they now want to add an internal Linux-based DNS server.In looking through the ASA-5505 today I noticed a field for DNS enteries. Is this where the IP for this new internal DNS Server (in the secondary DNS field) would go?If so, would it be necessary to reboot the ASA-5505 for this change to take effect?

View 12 Replies View Related

Cisco Firewall :: 5505 ASDM Location Is Using Same IP As Internal Server

Oct 27, 2011

I have a server that I need to open up some ports on to allow access to the new internal Sharepoint server we're setting up. I've been having some issues getting the ports open like once I put the commands in and save them that server suddenly stops allowing outbound traffic. After looking at a few things I noticed while I was looking at the config file that the ASDM location is showing 2 IP's, both are the same as the server I'm trying to open ports for one being the private IP and the other is the public IP I'm trying to use. Is this the reason I'm having problems when I try to open those ports to my server? Do I need to use both a different private and public IP for this server so I can get my ports to work? The programmers selected these IP's so if I need to change them I'll let them know in case they need to make changes for the Sharepoint setup. This is on an ASA 5505.

View 12 Replies View Related

Cisco Firewall :: 5505 Configure Internal Router And DNS Server - No Internet

Dec 23, 2011

Currently I have an ASA setup as a Firewall with 1 outside interface and 2 inside interfaces. Initially, the Guest interface was setup to receive DHCP from the ASA and everything was working. I'm adding router and a server for the guest interface and what I'm trying to accomplish now is the following: ASA 5505 > Airport Extreme with a public static IP (69.xx.xx.6), handling DHCP and NAT  > Mac Server as DNS Server.Right now, when I connect to my Airport Extreme with any computer, I don't have internet. I don't understand what's wrong. My DNS Server has a reserved IP address: 192.168.226.2 and it's pointing to itself and forwarding the ISP DNS servers, the Airport Extreme is handling the DNS Server IP and the ISP DNS Server IP but I can't connect to the internet from the server.  [code]

View 31 Replies View Related

Cisco Firewall :: ASA 5505 - HTTPS Traffic Through DMZ Interface To Internal Exchange Server?

Apr 23, 2012

I have an ASA 5505 with the base license,When I setup the DMZ interface I had to add the deny access to the inside VLAN.  The DMZ works fine with WiFi on it, but user's iPhones can't get email unless they turn WiFi off.Is there a simple way to allow HTTPS traffic through the DMZ interface to our internal Exchange server which is NAT'd on the 5505's external IP?

View 3 Replies View Related

Cisco Firewall :: Can't Access Internal Servers From Behind ASA 5505

Apr 3, 2013

I am having some trouble accessing some backup Email (Outlook Web Access) and Citrix servers located behind an ASA 5505 firewall at a remote datacentre. Simply put, when I go to the specific URL (e.g. [URL]) I do not arrive at the splash page, I just get a message saying that the server took too long to respond in the web browser. I'm wondering whether I have missed something on the configuration or the firewall itself is not letting my requests through. The remote servers are located at a remote Disaster Recovery site and use the subnet 192.168.4.0/24. I am at head office which is connected to the DR site via a VPN using 192.168.1.0/24.

[Code] .....

View 2 Replies View Related

Cisco Firewall :: ASA 5505 / Allow External Traffic To Access Internal Computers

Mar 22, 2012

We have an ASA 5505 running version 8.4. We are having problems allowing external traffic to access computers behind the firewall. Our current config is:
 
ASA Version 8.4(3)!hostname ciscoasadomain-name default.domain.invalidnames!interface Ethernet0/0switchport access vlan 2!interface Ethernet0/1!interface Ethernet0/2!interface Ethernet0/3!interface Ethernet0/4!interface Ethernet0/5!interface Ethernet0/6!interface Ethernet0/7!interface Vlan1nameif insidesecurity-level 100ip address 10.2.1.1 255.255.255.0!interface Vlan2nameif outsidesecurity-level 0ip address 152.18.75.132 255.255.255.240!boot system disk0:/asa843-k8.binftp mode passivedns server-group DefaultDNSdomain-name default.domain.invalidobject network a-152.18.75.133host 152.18.75.133object network a-10.2.1.2host 10.2.1.2object-group network ext-serversnetwork-object host 142.21.53.249network-object host 142.21.53.251network-object host 142.21.53.195object-group network ecomm_serversnetwork-object

[code]....

View 10 Replies View Related

Cisco Firewall :: ASA 5505 / Vendor Is Not Able To Access Devices On Internal Network

Sep 10, 2012

I have a 5505 between a vendor router & my company network, vendor is not able to access devices on internal network. I am also not able to access the firewall via asdm

View 10 Replies View Related

Cisco Firewall :: 5520 Can't Access Internal Web Server From Outside Network

Aug 23, 2011

I am using ASA 5520 with 8.2.4 IOS. I'm new to ASA/Firewall. I need to do access webserver from outside network.From Laptop (192.168.2.51), If I connect to url... it should open page from 10.10.10.50.I also need to ssh to webserver from laptop. If I ssh to 192.168.2.50 from laptop, it should connect to 10. 10. 10.50. [code]I can't get to webserver from outside network, so now, I connected laptop to directly ASA 5520 outside port with crossover cable.ASA Inside port connects to L3 switch. Webserver also connects to L3 switch. But still doesn't work.

View 9 Replies View Related

Cisco Firewall :: 3391 / 3389 - PIX Config For RDP Access To Internal Server?

Aug 21, 2011

It's been a while since I've done a lot with a PIX config so what is the best way to allow access for 2 IP addresses that need to RDP into a server here inside our network. They also wanted to have ports redirected, 3391 to 3389 and 3397 to 3389.

View 12 Replies View Related

Cisco Firewall :: ASA 5505 / Can't Access Web Server

Jul 9, 2012

We have a Cisco ASA 5505. As of yesterday we could no longer access our web server (the web server is hosted off-site). Pinging the DNS address and direct IP (from the firewall and a PC) both return no response. Pinging the IP from the T1 router responds properly, meaning the router can access the web server, but the firewall cannot. Accessing the web server has never been a problem, and no configuration changes have been made to the network/firewall. Other locations can access the web server just fine.

View 1 Replies View Related

Cisco VPN :: ASA 5505 Cannot Passthrough PPTP To Internal Server

Feb 10, 2013

I add a new Cisco ASA 5505 as firewall in of company network. I found the PPTP authentication did not get through to internal Microsoft Server.

ASA Version 8.4(3)!names!interface Ethernet0/0switchport access vlan 2!interface Ethernet0/1switchport access vlan 2!interface Ethernet0/2!interface Ethernet0/3!interface Ethernet0/4!interface Ethernet0/5!interface Ethernet0/6!interface Ethernet0/7!interface Vlan1nameif insidesecurity-level 100ip
[Code]....

View 4 Replies View Related

Cisco WAN :: ASA 5505 - Assign External IP To Internal Server?

Mar 2, 2012

I have 3 external ips from my isp:

222.222.222.221
222.222.222.222
222.222.222.223

The first one I use to provide internet access to my office. The other two I'm going to use for the following: I'm going to deploy a server in internal network which must have 2 external ips on his network interface (& one internal ip on the second,but that's ok: I cannot put an extra network switch before asa & plug this server there: this server is virtual & is on esxi host in internal network. External ips must be assigned to servers' interfacw,bot just forwarded there (ms direct access requirement).

My current config:
 
!
ASA Version 8.4(3)
!
hostname msk-office

[Code]....

View 20 Replies View Related

Cisco Firewall :: SQL Server Access From DMZ Interface ASA 5505

May 25, 2011

I would like to allow users from network 10.132.23.0/24, 10.132.33.0/24, 10.132.24.0/24 access to our SQL server(192.168.1.7) located on the inside interface(192.168.1.0/24 network) Those networks (10.132.0.0/16) come from the DMZ interface.

View 12 Replies View Related

Cisco Firewall :: 5505 Configuring RDP Access To Local Server

Jun 10, 2012

I need configuring RDP access to my local server from a remote location on my Cisco ASA 5505 Firewall.I have attempted to configure rdp access but it does not seem to be working for me. How to modify my current configuration to allow this? I need to allow the following IP addresses to have RDP access to my server: [code] The other server shows up as 99.89.69.334 but is working fine.
 
I already added one server for Static route and RDP but when I try to put in same commands it doesnt allow me to for this new one. My configuration file and what are the commands i need in order to put this through. Also, if there are any bad/conflicting entries. Also I have modified IP information so that its not the ACTUAL ip info for my server/network etc... lol for security reasons of course.Also the bolded lines are the modifications I made but that arent working. [code]

View 8 Replies View Related

Cisco VPN :: Allow Remote Access To Windows Server Through ASA (5505) Firewall

Jul 13, 2011

I would like to allow remote access to a windows server through a ASA  (5505) firewall. Users will use the vpn connection in order to connect to a private network. Is there any link  that describes the steps for ASDM?

View 3 Replies View Related

Cisco Firewall :: Access Windows Server From Outside Address With ASA 5505

Oct 6, 2011

I just purchased a domain name, that I have forwarding to my WAN address.  I want to be able to access my home websie via this route.  I have an ASA 5505, how do I get the ASA to point to the home server when the WAN IP address is entered?

View 16 Replies View Related

Cisco WAN :: ASA 5505 - Forwarding All Incoming Traffic To Two Internal HTTP Server

Oct 2, 2011

We have Cisco ASA 5505, 90.x.y.2/29 IP is assigned to outside interface. We have one internal HTTP server so that I use static (inside,outside) tcp interface [URL] to forward all incoming HTTP traffic to internal HTTP server 1. Now we need to add new physical HTTP server 2 so that I would like to forward

HTTP traffic to e.g. 90.x.y.3/29 to 172.16.0.11.
 
How can I do that? See scenario image (scenario.png) if needed.

View 6 Replies View Related

Cisco Firewall :: Setup ASA 5505 Access Or NAT Rules To Inside Server / IP Cam

Oct 25, 2012

I'm having trouble setting up the correct rules on an ASA 5505 I'm using in my home office.  I have a couple of IP Cams I need to access remotely.
 
I've tried setting up simple NAT(PAT) and/or Access Rules, but it hasn't worked.  I have a single dynamic IP for the Outside interface.  Call it 77.76.88.10 and I am using PAT.  The CAM is setup to connect on port 80, but could be configured if necessary.  I've tried setting up NAT Rules using ASDM as follows:
 
Match Criteria: Original Packet
Source Intf = outside
Dest Intf = inside

[Code]....

I'm afraid to use CLI only because I am not confident I'll know how to remove changes if I make a mistake.

View 9 Replies View Related

Cisco Firewall :: 5505 Server Looses Network Access When Vpn Is Active

Sep 27, 2012

When I start a VPN-session my server looses internet access. The server is host for a few virtual machines and they have internet access.using 5505 and asa is version 8.4(2). [code]

View 6 Replies View Related

Cisco Firewall :: 5505 Access Websites Hosted On Local Web Server

May 4, 2013

I have a Cisco ASA 5505 in my home office which has a few PCs behind it with a linux web server running some websites. I can access the websites from outside no problem (i.e. on my iPhone using a 3G connection). However, I struggle to access the websites from within the network. The ASA gives me this error: [code]

View 3 Replies View Related

Cisco VPN :: ASA 5505 / Remote Access VPN - Unable To Access Internal Network

May 7, 2012

I have created remote access vpn in my ASA 5505. The tunnel is established but i am not able to access the internal network.

View 3 Replies View Related

Cisco VPN :: 5505 - Logged In VPN Can't Access DMZ From Internal Network

Apr 9, 2012

What I got is a 5505 ASA firewall and I'm connected to it via VPN.  I'm pulling an 192.168.169.x address because that's what we set their company's internet LAN to.  Which is what we want.  What I can't do while I'm VPN'd in is ping from the internet network to the DMZ, and the same when I try and ping from the DMZ to the internal network.
 
The DMZ is on a 196.0.0.x network.The internet network is 192.168.169.x network.
 
I don't need them to have internet access on the DMZ I just want to be able to access it from the internal network.  What is going on is we need them to be able to VPN into the DMZ and access their equipment.  At this point it would just make me happy to be able to ping from the internal network to the DMZ and I can figure it out from there I've setup rules and applied them and when I wasn't having success I referred back to defaults.  Right now the rules are set at default, any thing in and anything out, on both internal and DMZ.  I'm using a VPN client and going through Cisco ASDM Launcher to setup the rules and static routes, I haven't done anything with the command line.  All the research I've done everyone does it command line, I find it easier to do it GUI.  This is my first time working with an ASA firewall.

View 2 Replies View Related

Cisco VPN :: ASA 5505 - Remote Access To Different Internal Networks

Jan 17, 2013

A customer has a ASA 5505 with a remote access vpn. They are moving their internal network to a new scheme and would like users who come in on the vpn to access both the exisiting and new networks. Currently the can only access the exisiting. WHen users connect to the remote access vpn, the asa gives them an address of 192.168.199.x. The current internal network is 200.190.1.x and they would like to reach their new network of 10.120.110.x.
 
Below is the config:
 
:
ASA Version 8.2(5)
!
hostname ciscoasa

[Code].....

View 2 Replies View Related

Cisco Firewall :: ASA 5505 How To Map SSH From Outside Network Range To Internal

Feb 21, 2013

I have a Cisco ASA 5505 (version above) and I have someone that needs to SSH into a box behind the ASA. I'm having a few issues trying to configure this access-list and NAT. I've tried many combinations and clearly my IOS is not as good as I thought. What commands should I enter to accomplish mapping SSH from an outside network range to an internal host ?

View 5 Replies View Related

Cisco Firewall :: Isolate Internal Net On Port 4 Asa 5505?

Nov 20, 2011

I want to have my port 4 on the asa 5505 only allow access to the internet and not the internal network, what do i need to do?

View 1 Replies View Related

Cisco Firewall :: ASA 5505 Configuration Cannot Get To Internal Network

Jan 25, 2012

I now need to configure an ASA 5505 for a small server farm.  It's fairly straightforward:isp -> asa5505 -> internal servers,'m using static addresses -- no DHCP involved.VPN works;  I can get into the internal network.pinging from the ASA to an external address works,However, I cannot get from a laptop connected to an internal port out to the internet, either using ping or typing an address in the browser.

View 7 Replies View Related

Cisco Firewall :: ASA 5505 Routing Between Internal Networks

Feb 18, 2013

I am new to Cisco ASA and have been configuring my new firewall but one thing have been bothering. I cannot get internal networks and routing between them to work as I would like to. Goal is to set four networks and control access with ACL:s between those.
 
1. Outside
2. DMZ
3. ServerNet1
4. Inside
 
ASA version is 9.1 and i have been reading on two different ways on handling IP routing with this. NAT Exempt and not configuring NAT at all and letting normal IP routing to handle internal networks. No matter how I configure, with or without NAT I cannot get access from inside network to DMZ or from ServerNet1 to DMZ. Strange thing is that I can access services from DMZ to Inside and ServerNet1 if access list allows it. For instance DNS server is on Inside network and DMZ works great using it. [code]

View 13 Replies View Related

Cisco Firewall :: ASA 5505 Connecting 2 Internal Networks?

Nov 7, 2012

We recently changed locations and acquired a new circuit from our provider. They also connected our remote branch office to our main office through MPLS. Now, as I understand it, the branch office basically connects back to the main office through our providers network (MPLS). We have a new router at the branch office which has a gateway of 192.168.1.225. The clients in that office have IP's of 192.168.1.96 - 100, using the gateway of 192.168.1.225.
 
The main office network is 192.168.0.0 (Gateway of 192.168.0.1)
 
At this end (Main office), I also have a new Cisco 2900 provided by the ISP, with port 0/0 for the outside connection (connected to the 0 port on my ASA 5505). The ASA's port 1 obviously running into my network hub. The provider tells me that port 0/1 on the 2900 is or should be used to connect the branch office back to here and has an IP of 192.168.0.225, as that's how the provider provisioned it. So, I plug that into the ASA's Ethernet port 0/2. And I'm assuming they have a route setup either on the 2900 or the router in the branch office so that 192.168.1.225 can reach me here at 192.168.0.0.
 
There is already a static route setup on the ASA: (192.168.1.0 255.255.255.255 192.168.0.225 1). As soon as I plug in the cable, the IP phones at the branch office work, but they can't access the internet or any resources in the main office. My questions are:
 
1. Shouldn't I be able to just go straight from the 0/1 port on the Cisco 2900 to my hub. At first I was plugging right into the ASA, but I don't think I need to do that, why go from the branch office through my ASA to access resources and then back out the ASA for internet. If they're already coming from 192.168.1.225, through the MPLS network, then they should go right to my network and then back out the ASA.
 
2. They have to route through the ASA first, in which case, do I need to setup another VLAN for that branch network in conjunction with a static route? I can ping the router and hosts in the branch office through the ASA only!
                 
Below is the running sanitized config:
 
Result of the command: "show running-config"
: Saved:ASA Version 8.2(2) !hostname ciscoasadomain-name audiology.orgenable password ulzaQiFnKVzDwUmW encryptedpasswd 2KFQnbNIdI.2KYOU encryptednames!interface Vlan1nameif insidesecurity-level 100ip address 192.168.0.1 255.255.255.0 ospf cost 10!interface Vlan2nameif outsidesecurity-level 0ip address 1.2.3.4 255.255.255.240 ospf cost 10!interface Ethernet0/0switchport access vlan 2!interface Ethernet0/1!interface Ethernet0/2!interface Ethernet0/3!interface Ethernet0/4!interface Ethernet0/5!interface Ethernet0/6!interface Ethernet0/7!boot system disk0:/asa822-k8.binftp mode passiveclock timezone EST -5clock summer-time EDT recurringdns server-group DefaultDNSdomain-name audiology.orgsame-security-traffic permit inter-interfacesame-security-traffic permit intra-interfaceaccess-list

[code]....

View 16 Replies View Related

Cisco Firewall :: Accessing Internal Sites Via External IP 5505

Jun 4, 2012

I have a Cisco 5505, 2 sites that are internal, 1 external IP (dhcp from cable modem).   While on my laptop, ipad, iphone, I cannot access the server via it's external IP address.  I MUST use the internal IP in order to access this site. I have heard of hairpinning, internal dns server(don't really want this).

View 8 Replies View Related

Cisco Firewall :: ASA 5505 Internal Address To Forward From External One

May 30, 2013

I have an old ASA 5505, and I'm having some trouble with Nat Hairpinning. I've done this with other firewalls before and I am having no luck now. I have an internal address that I wish to forward from an external address- so if someone goes to 123.456.789.012:3456 then it will forward to 192.168.1.244:92 (All numbers are arbitrary here- only for illustration). I have and Access Rule and NAT and PAT set up so that I can get in if I originate from outside the LAN. What I am trying to do is to have this work from inside the LAN as well- so that if I am at my desk, and I connect a device and type in 123.456.789.012:3456, it will deliver the content at 192.168.1.244:92. The problem I am having is that it just isn't working, and I cannot figure out why- When I started here, there was an address configured to work this way, and it still works- I just cannot find what is different between what I am doing and what the person who configured it did.

View 5 Replies View Related

Cisco Firewall :: ASA 5505 Allowing Traffic Between Two Internal Networks

Aug 30, 2011

I'm usually not working with this product, but this is what I'm trying to do.I have 2 internal networks setup on our Cisco ASA 5505 firewall. (not done by me, I'm a new to this product)I'm trying to access a server on one network from a PC located on the other internal network. (preferable through the web gui)When I try "Packet Tracer" from interface "Trust4" it fails on the NAT phase.(Source ip: 10.0.4.99, Destination ip: 10.0.6.99)
When I check the NAT rule, it says:
Type            Source     Interface    AddressDynamic         any          outside      outside.

View 3 Replies View Related

Cisco Firewall :: ASA 5505 Cannot Ping Secondary Internal Network?

Jan 15, 2012

Cisco ASA 5505 Cannot Ping Secondary Internal Network.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved