Cisco Firewall :: 5520 Can't Access Internal Web Server From Outside Network
Aug 23, 2011
I am using ASA 5520 with 8.2.4 IOS. I'm new to ASA/Firewall. I need to do access webserver from outside network.From Laptop (192.168.2.51), If I connect to url... it should open page from 10.10.10.50.I also need to ssh to webserver from laptop. If I ssh to 192.168.2.50 from laptop, it should connect to 10. 10. 10.50. [code]I can't get to webserver from outside network, so now, I connected laptop to directly ASA 5520 outside port with crossover cable.ASA Inside port connects to L3 switch. Webserver also connects to L3 switch. But still doesn't work.
View 9 Replies
ADVERTISEMENT
Jan 23, 2012
We have a Cisco wireless infrastructure in place that includes a guest network with its own subnet that is a sub interface of the inside interface on our ASA 5520. There are no routes for it to be allowed access to the internal subnets. So it can only access the internet. This is primarily used by the public, but we have several non employee personnel that we only want to give internet access and force them to access the internal network through our clientless SSL vpn portal or through other internet facing internal resources such as webmail.I have done packet traces from within the ASA and the break appears to be there is no ACL allowing the traffic back into the network once the web resource replies to the request and the traffic is attempting to come back into the network from the web resource. Is that as clear as mud?
I know that this has to be a common problem and a way around this is to allow the guest wireless network access to the internal network but only for the select resources that they require. And that this can be done seemlessly by network specific routes and or alternate DNS entries, but I would like to keep this simple and just allow them to access the web resource, webmail and VPN, from the guest wireless using internet DNS servers without route trickery.
View 8 Replies
View Related
Mar 14, 2011
I am trying to build a remote vpn in ASA 5520 Software Version 8.3(1). I am using ASDM 6.3(1) for the configuration. I went through the SSL VPN wizard and did the configuration. I tried connecting to the ASA using anyconnect VPN and I could successfully connect the VPN. My home laptop takes an IP 192.168.60.21 (which I have defined in the wizard). Now my issue is, I can't access any office internal network from this laptop (none of the internal IP is ping ing even). Meanwhile, I could ping and rdp to this laptop(which is connectd by anyconnect VPN) from my office network. One thing I noticed is that when I give a traceroute to an internal IP from the laptop, the first hop goes to my home ISP router.
View 8 Replies
View Related
Feb 28, 2013
I have created a new sub-interface on our ASA 5520 for guest internet access.
My goal is to allow access to a few specific services hanging off some dmz interfaces on the same firewall and full unrestricted access to the internet only. Everything else should be out of bounds.
The order of the rules I plan to setup on the guest interface inbound are:
#1. <rules to allow access to specific services in the dmz>
#2. <block any ip access to the entire private network ip address space>
#3. <permit ip any any>
#1. These rules will give access to the guest user to services located in the dmz
#2. This rule will block all access to any services in the private ip address space (thus blocking access to all internal services)
#3. This rule is to allow access to any other services i.e. the internet.
Is this the best way to achieve my goal in the most secure way or is there a better way? i.e. is there a way to force the traffic by default to only go out the outside interface unless there is a specific rule allowing it go elsewhere?
(Of course Dynamic PAT will also be configured for traffic coming from the guest interface to the outside interface.)
View 2 Replies
View Related
Aug 2, 2011
I tried the solution posted at [URL] however it did not work on my ASA5505 8.4(2). I thought that it may be because I only have a single public address so the web server is responding to port forwarding through the one public IP already. looking in ASDM it appears to indicate that a configured access list is blocking the server from responding to the internal hosts.
object network Private_IP
host 192.168.1.15
object network Public_IP
host 1.1.1.1
object-group network internal_net
[code]....
Can I fix an access list (or something) to make this work or am I wishing for too much with only one public IP? This worked by default on my Netgear firewall.
View 4 Replies
View Related
Aug 21, 2011
It's been a while since I've done a lot with a PIX config so what is the best way to allow access for 2 IP addresses that need to RDP into a server here inside our network. They also wanted to have ports redirected, 3391 to 3389 and 3397 to 3389.
View 12 Replies
View Related
May 21, 2012
I am using a 6500 with FWSM. I need to separate an internal server/HQ network from 3 or 4 different external connections. The external networks do not necessarily need to be isolated from each other.I have the option of using a 3 layer model: L2 Access layer to SVIs on the Distribution layer and then L3 to the 6500.L2 Access, connecting directly to the 6500s, with the SVIs on the FWSM.Is it better to have the FWSM outside the MSFC or Inside? Am i correct in thinking that "inside" vs "outside" is determined by whether the SVI's are configured on the FWSM or the MSFC? is there any performance impact from having the FWSM doing the routing instead of the MSFC.If the vlans are all configured on the FWSM, what is the 6500 doing, other than providing switch ports?
View 1 Replies
View Related
Dec 13, 2012
How can I access my webserver (on my private LAN) from the internet? INTERNET------------(53.X.X.1 )ASA(192.X.X.X)DMZ-----------(192.X.X.80)HTTP SERVER. I can ping my public address on the ASA outside interface 53.X.X.1 form the internet, but I'm not sure how to do this. I tried to NAT, but I'm failing.
View 3 Replies
View Related
Sep 21, 2012
I need to configure my ASA 5520 version 7.3 firewall to translate our SMTP server residing in local LAN to use different IP address from the outside interface which is used by all other computers to access Internet. Under NAT section, I have NATted this internal SMTP server with different IP address(eg x.x.x.1) and also translated the remaining IP addresses in the LAN to the outside interface(eg x.x.x.2)
my problem is, Whenever i check the header for message coming from the smtp server it shows that, the SMTP server is also translated by using the same outside interface public ip address(i.e x.x.x.2) which is used by other client machine to access internet instead of the x.x.x.1. How I can get my SMTP server to use separate IP and avoid to be blacklisted by some domain.
View 4 Replies
View Related
Mar 20, 2012
Currently i am having a scenario where i have setup RV042 and which is connected to Microsoft Forefront 2010. PPTP works fine only on rv042 subnet but i am not able to access the "internal" network of TMG.RV042 (172.16.1.1) ---> TMG [external] (172.16.1.2) ---> TMG [internal] (192.168.1.1) Is there any way through static route to access the TMG internal network through RV042 pptp server?
View 1 Replies
View Related
Dec 8, 2012
I have an ASA 5520 with a DMZ with private addresses that I SNAT to my outside network. From inside the DMZ I can reach servers by both the internal private IP and the public IP, except if the IP is from the server trying to connect. So, say I have server1 and server2. I can connect from server1 to server 2 with both public and private, but can't connect from server1 to server1' using the public IP. ASA logs show that packets are being denied due to land attack. DNS doctoring is not an option for me.
View 1 Replies
View Related
Aug 1, 2012
After connecting via anyconnect client 2.5, I cannot access my internal network or internet. My Host is getting ip address of 10.2.2.1/24 & gw:10.2.2.2
Following is the config
ASA Version 8.2(5)
!
names
name 172.16.1.200 EOCVLAN198 description EOC VLAN 198
dns-guard
!
interface Ethernet0/0
description to EOCATT7200-G0/2
switchport access vlan 2
[code]....
View 5 Replies
View Related
Dec 18, 2012
I have the syntax correct and thought process down right on a solution to allowing guest wireless users access to an internal webserver. (DMZ discussion aside)
We have an ASA5510 with interfaces setup as:
outside - 65.x.x.x address
inside - 172.20.1.2
guest_inet - 10.2.1.1
Internally clients resolve our website to 192.168.40.40 and that part works as it should. Clients outside of our network resolve our website to the correct external address (lets just call it 1.1.1.1). We have a NAT statement static (inside, outside) 1.1.1.1 192.168.40.40 netmask 255.255.255.255 and an ACL to permit tcp any host 1.1.1.1 eq www
Clients on our guest_int use an external DNS server and hence resolve our website to 1.1.1.1. However it seems traffic goes out and back in our outside interface and this connection never occurs.
What I'm wondering is the correct NAT statement / ACL to add that would allow our internal clients on the 10.2.1.x network to access our internal website. Would that be: static (inside,guest_inet) 1.1.1.1 192.168.40.40 netmask 255.255.255.255 ? Since there is already an ACL permitting port 80 traffic to 1.1.1.1 we should be taken care of on the ACL side of things, right?
View 3 Replies
View Related
Sep 10, 2012
I have a 5505 between a vendor router & my company network, vendor is not able to access devices on internal network. I am also not able to access the firewall via asdm
View 10 Replies
View Related
May 13, 2012
I am not very familiar with ASA 5520 yet.I have been able to allow the OUTSIDE world to connect via SSH to the intermal host 172.17.2.50 on my DMZ network. I've created a NAT rule and an ACL as written on the configuration below.
Now I need the INTERNAL network to ssh 172.17.2.50 but ASA stops me with the following error: [code]
View 2 Replies
View Related
Apr 4, 2011
I've got a cisco asa 5520 and setting up the NAT for multiple DMZs on it.
I want to use PAT on the outside interface.
internally ive created subinterfaces for the VLANs and connected to a trunk port on a switch.
configure NAT for this scenario. I've got only 1 external public IP address.
View 1 Replies
View Related
Nov 8, 2011
Used a pair of ASA 5520s in HA to firewall the internet edge and to firewall traffic between internal security zones such as web and application layers? If so, is this best done using different security levels or contexts?
I'm thinking of using a routed context for securing the internet edge and then using seperate contexts for the web and application networks. Contexts will route via a L3 switch.
View 3 Replies
View Related
Jan 27, 2013
I have a small request. I have a setup where the internal users within the corporate network need to remote VPN into the VPN concentrator.
The setup is as below
inside
(202.x.x.x)VPN ASA 5520 ---------------- FW ------------- intenal network
----------------
outside
The problem is that the 10.0.0.0/8 internetl network establishes the connection via the outside interface. However, the return path is via the inside interface. But the vpn concentrator keeps showing next-hop not reachable for USP 500. Why does it show that when it has a route via the inside interface.
6|Jan 29 2013 13:44:38|110003: Routing failed to locate next hop for udp from NP Identity Ifc:202.x.x.x..29/62465 to outside:10.163..x.x/5892
Also, since we are trying to send traffic from outside to the inside interface, I tried to NAT the source ip i.e 202.x.x.x and left the source unaltered. But it still doesnt work.
I am wondering why is the ASA not routing via the inside interface and looks for the return traffic via the same outside interface the traffic entered in. The outside has a security-level of 0 and the isnide has a sec-level of 100.
View 17 Replies
View Related
Jul 26, 2011
I've just taken over a new network with a Cisco ASA5520. Everything is working fine, except I am being bombarded with 106001 alerts from a few internal hosts to one specific internal host. The description in general is "Inbound TCP connection denied from 10.1.0.1 to 10.1.0.5 - both of those are valid internal hosts and the TCP ports are also valid. I tried looking at the log and getting it me to tell me which rule was causing these alerts, but it just came back with 'It's not possible for these type of alerts'
- How is it possible for the ASA to even pick up on this when, in theory, the source host wouldn't be going near the ASA since it's on the same subnet?
- What might be causing this?
- How can I turn it off!! (I guess that'd be fixed by point 2)
View 4 Replies
View Related
Mar 13, 2013
i configured cisco asa 5520 as cisco ezvpn server and cisco 891 as ezvpn client .the configurtion is working fine.i am using client mode on the ezvpn client side.but my quesion is , is it possible to communicate to ezvpn client side internal ip from the ezvpn server side?and one more thing what is the benefit of network extension mode on the client side and how it will work what are possible changes need to do in the server and the client side.
View 4 Replies
View Related
Feb 21, 2012
Have cisco ASA5520 on place and i want to configure it to access my webserver outside of my network throught sftp/ftp with filezila what command to add so as port/service associate to it should be able to run?
View 1 Replies
View Related
Mar 26, 2012
For a config on a 2821 router with IOS 15.1?I've setup an internal web server and am able to acccess it from outside our network but not from inside (on a separate internal LAN - 192.168.10.0). When on the internal LAN - DNS points to the Public IP for the web server - so we'd need to route through the Public IP to access the web server.
What is the best way to allow access to the web server XX.XX.XX.231 from 192.168.10.0 network?
Related Config Lines to Allow Access to Web Server
NAT
ip nat inside source static tcp 192.168.1.230 80 XX.XX.XX.231 80 extendable
ip nat inside source static tcp 192.168.1.230 443 XX.XX.XX.231 443 extendable
ACL
ip access-list extended WAN
permit tcp any host XX.XX.XX.231 eq 443
permit tcp any host XX.XX.XX.231 eq www
[code]....
View 2 Replies
View Related
Jan 12, 2011
I have a client in a workgroup environment. They are a small company with perhaps twenty systems. Their infrastructure consists of a Dell Switch, a Cisco ASA-5505 which hands out the DHCP and a router. And that's that.They have been using an external IP as their DNS Server to get out to the Web. However, they now want to add an internal Linux-based DNS server.In looking through the ASA-5505 today I noticed a field for DNS enteries. Is this where the IP for this new internal DNS Server (in the secondary DNS field) would go?If so, would it be necessary to reboot the ASA-5505 for this change to take effect?
View 12 Replies
View Related
Nov 22, 2011
I running site-to-site IPsec VPN in Cisco 2811 IOS 12.4 both site. Here I encounter a problem to access server on Site A from Site B
Site A having Leased Line connected to router with Public IP. I have done static mapping 1 web server to Public IP (NAT). This to allow external users to access the server via Public IP. At the same time, users at Site B would need to access to same server via Internal IP since they have Site-to-Site VPN established. But once I done Static Mapping (NAT), user at Site B unable to access the server at Site A using its internal IP. But external user can access server via Public IP. What went wrong here. Do i need to add extra command to get this done?
View 3 Replies
View Related
Oct 31, 2011
i cant resolve one problem in may 1921 isr router, i have a web server in my internal lan , i set up static nat for accessing that web server from outside and it woks fine but i cannot view that site from internal workstations can you suggest me what to do. as i know when request gets to router it performs static nat and sends packet to the web server, but the server responds with its private source address instead the public address witch workstation expects and connection cannot established.
View 3 Replies
View Related
Dec 15, 2012
One of my internal servers requires it to be available to the internet I am having a hard time allowing it to be NATed through my Ciscc 2801 router. It seems as though im missing something small. From what I can gather it seems as though its as issue with ACL, but im not sure. I have ran the following command: ip nat inside source static tcp 192.168.5.1 ***WAN IP Address*** 8443 extendable Then I tried to add it to the ACL via this command: access-list 150 permit tcp any host ***WAN IP Address*** eq 8443
Here is a copy of my config.
IP 172.19.3.x
sub 255.255.255.128
GW 172.19.3.129
Ciscso 2801 Router
[code]....
View 5 Replies
View Related
Sep 25, 2012
I was just wondering if it's possible with an ASA 5510 to connect to the external IP address of an internal server from inside the network. I have already set up dns doctoring for dns lookups, and everything is working fine there. We have an application inside the network that tries to connect straight to the external Ip of another internal server. where to look in the ASDM 6.4?
View 2 Replies
View Related
Oct 27, 2011
I have a server that I need to open up some ports on to allow access to the new internal Sharepoint server we're setting up. I've been having some issues getting the ports open like once I put the commands in and save them that server suddenly stops allowing outbound traffic. After looking at a few things I noticed while I was looking at the config file that the ASDM location is showing 2 IP's, both are the same as the server I'm trying to open ports for one being the private IP and the other is the public IP I'm trying to use. Is this the reason I'm having problems when I try to open those ports to my server? Do I need to use both a different private and public IP for this server so I can get my ports to work? The programmers selected these IP's so if I need to change them I'll let them know in case they need to make changes for the Sharepoint setup. This is on an ASA 5505.
View 12 Replies
View Related
Dec 23, 2011
Currently I have an ASA setup as a Firewall with 1 outside interface and 2 inside interfaces. Initially, the Guest interface was setup to receive DHCP from the ASA and everything was working. I'm adding router and a server for the guest interface and what I'm trying to accomplish now is the following: ASA 5505 > Airport Extreme with a public static IP (69.xx.xx.6), handling DHCP and NAT > Mac Server as DNS Server.Right now, when I connect to my Airport Extreme with any computer, I don't have internet. I don't understand what's wrong. My DNS Server has a reserved IP address: 192.168.226.2 and it's pointing to itself and forwarding the ISP DNS servers, the Airport Extreme is handling the DNS Server IP and the ISP DNS Server IP but I can't connect to the internet from the server. [code]
View 31 Replies
View Related
Sep 13, 2012
I had an Linksys WRT54GS and this wireless is connected to a switch in an internal enviroment but i want connect guest users without them see my internal network and can't access to any internal server....how can i configure this?
View 1 Replies
View Related
May 24, 2012
I write here to see if some kind soul can not solve my problem (which is common to seeso many people around the world). problem: I have a mail server (192.168.1.17) configured static NAT because it is accessible byPublic IP (PPP.PPP.PPP.PPP). Everything works properly from the outside, but if I get my Mail server (on port 443) from the internal network (192.168.1.xxx) there 'verse. This configuration is called Nat inside-to-inside is done by default by some SOHO routers(such as the TPLINK from 25 euros) but Cisco did not succeed. I search on the internet for 2 days without a get nowhere. PS: I have a Cisco 1801 router. (or 1941 as another router).
View 13 Replies
View Related
Apr 23, 2012
I have an ASA 5505 with the base license,When I setup the DMZ interface I had to add the deny access to the inside VLAN. The DMZ works fine with WiFi on it, but user's iPhones can't get email unless they turn WiFi off.Is there a simple way to allow HTTPS traffic through the DMZ interface to our internal Exchange server which is NAT'd on the 5505's external IP?
View 3 Replies
View Related
May 22, 2013
I have ASA 5520 installed. I want to use ntp server for firewall clock setting. I found one open-access ntp server (stratum 2) in Los Angeles:
[URL] 209.151.225.100
Can I use the following command to set ntp server?
ntp server 209.151.225.100 source outside.
View 3 Replies
View Related
