Can't Access Router Address / Server
Feb 2, 2013i have trouble accessing 192.168.0.254 for setting up my device. it says cannot access server.
View 1 Replies
ADVERTISEMENT
Cisco VPN :: ASA 5505 To Create Web Server That Only Some Ip Address Can Access
Feb 21, 2013we have a cisco asa 5505 and it working great .i want to create web server that only selected public ip address can access.
View 3 Replies View RelatedCisco Switching/Routing :: 1841 - Access To Web Server On Outside Address From LAN
Jan 22, 2012I have a 1841 deployed as my NAT device towards internet. NAT is setup so that internal addresses can access WWW. I also have some NAT translations opening speciic ports from outside to inside in the form: ip nat inside source static tcp A.B.C.D 443 A.B.C.D 443 extendable.
Now have an outside address/port setup with a public DNS reference and using NAT from outside to get access to the corresponding inside address. It works when being outside the LAN.
Now to the problem: From the LAN side of the router - i cannot access the public name. I can ping it - but my browser dont find the webserver behind the name. Someone told me it should be setup as "local firewall domain" - and i should set this up as "source NAT".
Cisco Firewall :: Access Windows Server From Outside Address With ASA 5505
Oct 6, 2011I just purchased a domain name, that I have forwarding to my WAN address. I want to be able to access my home websie via this route. I have an ASA 5505, how do I get the ASA to point to the home server when the WAN IP address is entered?
View 16 Replies View RelatedCisco Switching/Routing :: 3750 / Access A Target Server With IP Address 10.2.2.13?
Oct 16, 2012Today when we run one applcation to access a target server with IP address 10.2.2.13, the application cannot run through and appearing error message related networking.The target server has two network ports whereby another one with IP 10.2.2.14 is running OK with the same application. All these two connections are connected to the same Cisco switch 3750, after the switch then go to Cisco ASA firewall which has no access control rule for this 10.2.2.13 and its subnet, and then the firewall connect directly to the application server.We can ping, remote desktop access and telent port for the application to the target server by using 10.2.2.13.We swapped the cable connection of the ports from one another and try the application again, the IP with 10.2.2.13 is still fail and IP with 10.2.2.14 is OK.We then change the IP from 10.2.2.13 to 10.2.2.12 or 10.2.2.155, all are OK. We changed back to 10.2.2.13, it is failed again.The switch is in running real time production and so we cannot power cycle or reload the switch.
View 9 Replies View RelatedCisco Application :: ACE 4710 Configuration - Client / IP Address Access For Web Server
Oct 15, 2011I want to use one arm infrastructure of ACE4710. But I remember it was problem for back end server can not get logging for which client/ip address access the web server.
View 3 Replies View RelatedLinksys Wireless Router :: EA6500 Unable To Select Folder Access / FTP Server / Media Server
Dec 9, 2012I purchased the EA6500 a few days ago, and when I'm connected to Cisco Connect Cloud I am unable to select Folder Access / FTP Server / Media Server. I click them and nothing happens.Also, the Cisco light on the router keeps blinking.
View 5 Replies View RelatedLinksys Wireless Router :: WRT54G2 - Cannot Get IP Address From PPPoE Server
Sep 20, 2012I have been working on this for hours and getting frustrated! This router has been set up for over a year with no trouble, but recently had trouble connecting with my wireless devices and was kicking my wired (ethernet) laptop off when it is usually on all the time.
Now, my wired connection works through the router, the wireless devices all connect to the network but do not have access to theinternet. From the router's setup page, when I enter my PPPoE information and go to status and connect, it tries to connect a few times then gives me the error message 'cannot get IP address from PPPoE server"
I have tried updating firmware, resetting, restarting, recycling power, chat support with ISP and chat support with Linksys. Have verified my username and key and those are correct otherwise I'd have no internet access at all. I do have wired access but not wireless. The wired connection does go through the router.
Bridging - my modem is a bridging modem only, so it shouldn't be that.
Linksys Wireless Router :: EA4500 Blocking 1 Server Address?
Apr 10, 2013My router,EA4500 is blocking just one I.P address,(a game server), and I am unable to connect to the server. I have tried this on 2 different computers, reinstalled the Cisco Connect software, reset to factory defaults and it is still blocking me from getting on this server. When I by pass the router and plug directly into my modem the Server shows up fine and I am able to get on but when I put the Router back it blocks it and does not show up at all.
View 1 Replies View RelatedBelkin Routers :: N450 Router Will Not Assign The DNS Server Address
May 4, 2013It took a while of troubleshooting since I've never ran into this problem with my wireless router before. But finally I figured out that my router will not assign the proper DNS server addresses when assigning through DHCP. I upgraded from 2.10.02 and still the same issue.
View 1 Replies View RelatedCisco WAN :: How To Config Other 7 IP Address On Web Server In Router 2800 Series
Jan 10, 2011i have Router 2800 series we are using leased line Connection 8 Pubilc IP.One IP Config in Router FE0/0 IP 101.102.148.91 and FE0/1 192.168.0.0 Local IP.I have 6 Web Server. How to Config other 7 IP address on Web server in the router 2800 series.
View 6 Replies View RelatedNetgear WGR614 V9 Router - Unable To Resolve Server DNS Address / Error 105?
Dec 27, 2011I'm connected through the router, a few times a day I cannot open web pages, getting error: Error 105 (net::ERR_NAME_NOT_RESOLVED): Unable to resolve the server's DNS address.Skype continues to work. Here are the results of pinging:
Quote:
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersSri Guru>ipconfig /all[code]....
One technician said that this is the providers problem, but I don't think so. When I restart the modem everything works.I have a Netgear WGR614 v9 router.I use ESET 5 security. Btw, connection drops on all computers connected through the router, so it's not my firewall.
Cisco Switching/Routing :: 3911 Router DHCP Server Not Giving IP Address
Jan 30, 2011I have a 3911 router with a 1242 AP. The problem that I have is that when the user is trying to connect, the user get the OS Ip address 169.254.168.154 and I see that when I do the "show dot11 association" command, but when I do sh ip dhcp binding on the router I see
172.19.9.141 0100.18de.74db.14 Jan 31 2011 11:14 AM Automatic
The router is seeing as if the router gave the ip address to the user, but the reality the user was assigne the OS ip address 169. I did "debug ip dhcp server events" and I got the following:
Jan 31 11:09:06.752 EST: DHCPD: Seeing if there is an internally specified pool class:Jan 31 11:09:06.756 EST: DHCPD: htype 1 chaddr 0100.18de.74db.14
Jan 31 11:09:06.756 EST: DHCPD: remote id 020a00000a58218400000000Jan 31
[Code].....
Cisco Routers :: How Many IP Address DHCP Server Can Handle Of RV0xx Series VPN Router
Sep 6, 2011How many IP address can handle the DHCP server of the RV0xx Series VPN router? can be configured for more than 250 ip addresses? it is posible to configure the router in order to have more than 250 ip address?
View 2 Replies View RelatedCan't Access Router Wrn2000 With IP Address?
Sep 1, 2011I have a netgear wrn2000v2 which I can't access using the default IP address 192.168.1.1. I can access it with routerlogin.com. What is going on?
View 1 Replies View RelatedCan't Access Router Configuration To Get IP Address
Oct 31, 2011we recently got a new router and added it to our network... works fine the problem now is that i'm trying to add some other ip addresses to access wireless internet (for security reasons the wirless internet is available only to one set of ip addresses) but now that i try to access the router config to get that ip address in i cant access the router config. i try multiple addresses but still nothing. i try to find the ip using cmd but it just gives me tunnel 000000000
View 4 Replies View RelatedLinksys Router 192.168.1.1 - Cannot Access IP Address
Jan 3, 2013Cannot connect to Linksys Router 192.168.1.1 Webpage. I am trying to access the IP address so I can secure my wireless router.
View 5 Replies View RelatedUnable To Access Router Address
May 26, 2012Im getting internet but i cant access my router address to get my config page. I had broadband wired internet a few days ago but now im using a wireless connection could that be the problem?
View 1 Replies View RelatedD-Link DIR-615 :: Cannot Access Router Through IP Address Or Dlinkap
Nov 14, 2011I cannot access my router through IP address or dlinkap. I am trying to connect a bridge for the living room in my house.When I do an IPCONFIG my default gateway as weird characters in front of the actual IP fb23:ff23 etc.
View 4 Replies View RelatedNo Access To Wifi Router - Adding Mac Address Filter?
Apr 6, 2011I tried to configure my wifi router recently to secure my internet connection. I wanted to add a MAC adress filter, but I had to leave before I could enter them all. I thought that I wouldn't have to enter my own MAC adress since I'm directly connected to the router with a wire, but it looks like I should have entered my MAC adress, because now I can't get access to my router by typing the IP adress, as usual. I tried to reset it, but it doesn't work.
View 2 Replies View RelatedLinksys Wireless Router :: WRT160N - Access To IP Address 192.168.0.1
Sep 16, 2012I have Linksys router model no. WRT160N, which I have been using for three years. I need to add two iPads to my router but I do not know the network password. I am trying to access the router IP address 192.168.0.1 to find out the network password, but when I put HTTP://192.168.0.1 in my browser, I receive the message: Internet Explorer cannot display the webpage. How can I find out the network password?
View 9 Replies View RelatedCan't Access Server Through Router?
Sep 27, 2011I have a small office network with a domain and a server. When I added a router to one of my computers, it is no longer able to access the server (which is not on the router). I'm hoping this is a simple fix.
View 2 Replies View RelatedRouters / Switches :: Access Router Webpage With A Correct Address?
Apr 29, 2011I try to access my router web page with a correct address (192.168.1.1) but on my computer i have this message {Network Error (tcp_error)} but i can access this page from another computer through the network (WHY)
View 1 Replies View RelatedL-WR740N - Unable To Access Router Interface After Altering Its IP Address
Jun 17, 2012I've been trying to configure a TP-Link L-WR740N to act as an access point using the instructions here as a guide. As stated in the guide, I've been changing the IP address of the TP-Link router to a new address that lies outwith the pool of available DHCP addresses in my combined modem/router but with less than resounding success. After rebooting the TP-Link router, I am unable to access the set-up interface - the newly allocated IP address doesn't work, neither does the original IP address work. What is happening here? If I change the IP address to one that lies within the DHCP pool and reboot, I can access it ok with the new address. However, that obviously clashes with the set-up instructions.
View 1 Replies View RelatedLinksys Wireless Router :: E4200 - Media Server / Router Access Loss Internet OK
Feb 20, 2012I have a problem with the e4200 router and a mybook 1 TB connected to it. The media server works fine but after a while i loose contact with the router and the server this means that the Cisco connect doesn't work, the 192.168.1.1 doesn't work and I can't find the disk via \. I do have internet connection via wifi as im using it now....why I loose connection to the router? The lease time is 24h and it can happen more than once in a day.
View 4 Replies View RelatedLinksys Access Point :: E4200 Discover New IP Address Of Reconfigured Router
Feb 14, 2013I have changed from a DSL internet service to a Comcast cable system. I have setup my E4200v1 router as an Access Point, to extend coverage in my building. It works fine, but I can no longer log on to the unit using its' IP address 192.168.1.1. The browser returns the message "Internet Explorer cannot display the webpage." If I want to tweak the settings the only thing I can think to do is to push the reset plug, back to factory settings and go through the whole process. Is there a way to discover the new IP address of the reconfigured router? I left the default address as it was when I made the changes to AP status.
View 1 Replies View RelatedLinksys Wireless Router :: Change WRT320N IP Address To Use It As An Access Point?
Oct 9, 2011When I change my WRT320N routers IP address to use it as an access point only and bring it in the IP range of my ccombined modem/router I'm not able to view the setup page via the new IP address. I have tried to change the IP from the default 192.168.1.1 to 192.168.178.2. After changing and applying the changes I restarted the router and tried to access the router via the new address. This was not possible am I doing something wrong or did I forgot something?
View 8 Replies View RelatedLinksys Wireless Router :: Wrt54gs V7 And A Wap54g V3.1 - Unable To Get IP Address From Access Point
Mar 1, 2012I have a wrt54gs v7 and a wap54g v3.1. Both have latest firmware on them. I set the access point to act as a repeater and entered the mac address from the router (It said to use the lan mac address. is that right?). I have them set on same subnet with static ip addresses. They have same wireless ssid and password with one using channel 10 and the other using channel 2. I can receive an ip address from the router and connect to internet. I cannot get an ip address from the access point. I tried a static ip on the computer and it will connect, but I don't have internet. Am I missing something in the setup? Can this access point act as a repeater for this router?
View 3 Replies View RelatedLinksys Wireless Router :: E1500 DHCP Gateway Address Always Defaults To Access
Apr 28, 2012I have a ADSL Modem with built in router that the E1500 is connected to via Ethernet.If I choose "Automatic Configuration" for the internet connection setting on the E1500 I can enable DHCP on the E1500 but the gateway it gives to clients is always that of itself (192.168.1.1). The gateway it should be is that of the ADSL Modem (192.168. 1. 254).If I choose "Bridge Mode" I can't even enable DHCP.Is there a way I can use the DHCP server?
View 1 Replies View RelatedLinksys Wireless Router :: WRT54GS Can't Access Any Internal Server?
Sep 13, 2012I had an Linksys WRT54GS and this wireless is connected to a switch in an internal enviroment but i want connect guest users without them see my internal network and can't access to any internal server....how can i configure this?
View 1 Replies View RelatedLinksys Wired Router :: RD042 - NAT Server Can't Access Internet
Mar 10, 2011I have an RV042 Router and did a one-to-one NAT mapping for my server using an additional external IP I received from byt ISP, pointing to machine 192.168.2.5. I am now successfully able to access the machine via the external IP without issue, however the server is no longer able to ping any external IPs?
the machine has been assigned a static IP of 192.168.2.5 and static DNS servers.
Linksys Wired Router :: BEFSR81 Access To Proxy Server
Jan 22, 2011My router is a Linksys BEFSR81.Recently I installed a proxy server and now I would like to setup my router so that only the proxyserver (HTTP traffic) can connect to the Internet.
View 3 Replies View RelatedCisco WAN :: 2960 / Internet Access Router Acting As DNS Server
Nov 25, 2011I have a design for my infrastructure and i'm thinking to choose 4 or 5, or more, 2960 series in a stack mode instead of one 4500 series?
View 4 Replies View Related
