Linksys Router 192.168.1.1 - Cannot Access IP Address
Jan 3, 2013Cannot connect to Linksys Router 192.168.1.1 Webpage. I am trying to access the IP address so I can secure my wireless router.
View 5 Replies
ADVERTISEMENT
Linksys Wireless Router :: WRT160N - Access To IP Address 192.168.0.1
Sep 16, 2012I have Linksys router model no. WRT160N, which I have been using for three years. I need to add two iPads to my router but I do not know the network password. I am trying to access the router IP address 192.168.0.1 to find out the network password, but when I put HTTP://192.168.0.1 in my browser, I receive the message: Internet Explorer cannot display the webpage. How can I find out the network password?
View 9 Replies View RelatedLinksys Access Point :: E4200 Discover New IP Address Of Reconfigured Router
Feb 14, 2013I have changed from a DSL internet service to a Comcast cable system. I have setup my E4200v1 router as an Access Point, to extend coverage in my building. It works fine, but I can no longer log on to the unit using its' IP address 192.168.1.1. The browser returns the message "Internet Explorer cannot display the webpage." If I want to tweak the settings the only thing I can think to do is to push the reset plug, back to factory settings and go through the whole process. Is there a way to discover the new IP address of the reconfigured router? I left the default address as it was when I made the changes to AP status.
View 1 Replies View RelatedLinksys Wireless Router :: Change WRT320N IP Address To Use It As An Access Point?
Oct 9, 2011When I change my WRT320N routers IP address to use it as an access point only and bring it in the IP range of my ccombined modem/router I'm not able to view the setup page via the new IP address. I have tried to change the IP from the default 192.168.1.1 to 192.168.178.2. After changing and applying the changes I restarted the router and tried to access the router via the new address. This was not possible am I doing something wrong or did I forgot something?
View 8 Replies View RelatedLinksys Wireless Router :: Wrt54gs V7 And A Wap54g V3.1 - Unable To Get IP Address From Access Point
Mar 1, 2012I have a wrt54gs v7 and a wap54g v3.1. Both have latest firmware on them. I set the access point to act as a repeater and entered the mac address from the router (It said to use the lan mac address. is that right?). I have them set on same subnet with static ip addresses. They have same wireless ssid and password with one using channel 10 and the other using channel 2. I can receive an ip address from the router and connect to internet. I cannot get an ip address from the access point. I tried a static ip on the computer and it will connect, but I don't have internet. Am I missing something in the setup? Can this access point act as a repeater for this router?
View 3 Replies View RelatedLinksys Wireless Router :: E1500 DHCP Gateway Address Always Defaults To Access
Apr 28, 2012I have a ADSL Modem with built in router that the E1500 is connected to via Ethernet.If I choose "Automatic Configuration" for the internet connection setting on the E1500 I can enable DHCP on the E1500 but the gateway it gives to clients is always that of itself (192.168.1.1). The gateway it should be is that of the ADSL Modem (192.168. 1. 254).If I choose "Bridge Mode" I can't even enable DHCP.Is there a way I can use the DHCP server?
View 1 Replies View RelatedLinksys Wireless Router :: EA6500 / Enable Parental Controls Or Access Restrictions To Block MAC / IP Address?
Mar 13, 2013I have been looking into this router, I would like to know if I can enable Parental controls or access restrictions to block a MAC or IP address; from 03:00 AM - 06:00 AM ?Instead of Midnight to 6:00 am.My E4200 works just fine, Just would like to know if the EA6500 Can do that ?
View 7 Replies View RelatedLinksys Wireless Router :: E2000 WAN IP Address Cannot Be Same Subnet As Guest Network IP Address
Jul 16, 2011I switched from Time Capsule with AirPort to E2000 and have a problem with configuration.I use the same IPs as in AirPort and E2000 gives me an error:"The WAN IP address cannot be the same subnet as the Guest Network IP address" and I can't save configuration.But in my opinion they are different.I use "Static IP" option and I have IPs from my ISP: [code] So WAN IP is different subnet as LAN and I don't know what to do now. It worked with these settings in AirPort and here I can't proceed.
View 2 Replies View RelatedLinksys Wired Router :: RVL200 / RVS4000 Possible To Assign Public IP Address As Local IP Address?
Feb 28, 2011Is it possible to assign public IP address as Router's local IP address (RVL200, RVS4000)?
View 1 Replies View RelatedLinksys Wired Router :: WRT54GS V5.1 MAC Address Appears With IP Address
Jul 3, 2011I have a Linksys WRT54GS v5.1 router running firmware 1.52.5.I am trying to use Linksys IP Phones SPA942, but these do not seem to be able to log on and just show "Initializing network" even though the MAC address appears in the router with an IP address.The strange thing is that I already have 4 SPA941 phones that work with no problem and just log on to the network.Is there something about the SPA942 that I need to configure differently, I have factory reset it with sucess, but still unable to log on to the network.
View 1 Replies View RelatedLinksys Cable / Dsl :: Wag54g2 - Access To Wifi By Mac Address?
Dec 20, 2011There is a Linksys WAG54G2 firmware v1.00.19. If you try to configure access to wi-fi on the list of MAC-address get the error "The MAC address can not be broadcast address" for the MAC address - 5c: XX: XX: XX: XX: XX, for mobile phone Sony Ericson Neo. Safety on the modem is turned off. Laptop computer and connect to Wi-Fi without any problems. Prompt a possible solution. Which parameters can be set?
View 3 Replies View RelatedLinksys Access Point :: WAP610N - Unable To Obtain IP Address
Dec 14, 2012I bought a Linksys WAP610N today, i placed it so i could get a signal where i can't normally.
The thing is i configured it correctly, well at least i think, i can see it on my wireless network, with a good signal, but on my Android tablet (Google Nexus 7), it can't get past the "Obtaining IP address".
I called the technical support, the person there tried to assist me for about 1 hour, we tried different settings, we upgraded firmware from 1.0.01 to 1.0.04, but it didn't worked. Now he said someone will call me tomorrow during the afternoon.
My router isn't Linksys, it's a Netgear, i don't have wireless problem when i connect my tablets or any other wireless device on it, it's just that i bought this WAP610N to have the signal in my bedroom, where i don't get any signal normally.
Linksys Access Point :: IP Address Does Not Show WAP54 But Netgear?
Feb 22, 2012Trying to setup secure net but when I type in the router IP Address, it shows Netgear, Type in printer IP address and it shows Linksys. How can I access my Linksys to make changes? I believe the Netgear shown is Comcast modem...
View 9 Replies View RelatedLinksys Access Point :: WAP54g Doesn't Recognize Laptop's IP Address?
Jan 9, 2012I reset my WAP54g v3.05 to factory default to allow an older computer access to my network.
Now I've reinstalled it for better security using my newer laptop: no SSID broadcast and encryption set for WPA2-personal. However, when I enable Mac filtering and permit my newer laptop, the WAP54g does not recognize it.
Disable Mac filtering and my laptop is back on the network.
Linksys Access Point :: E2500 Obtaining IP Address Timing Out While Connecting
Dec 5, 2011I have a E2500 router and 3 WAP610N access points. Users are having a difficult time connecting to the AP's. The client device just sits there trying to obtain an IP and then times out. If they get within range of the actual wireless router, then connect instantly. Is there a setting to increase that will allow longer time trying to obtain an IP?
I am using the same SSID for roaming, but am using different channels (1, 6, 11) for the overlap. See diagram below. Not sure if this has some impact?
Can't Access Router Wrn2000 With IP Address?
Sep 1, 2011I have a netgear wrn2000v2 which I can't access using the default IP address 192.168.1.1. I can access it with routerlogin.com. What is going on?
View 1 Replies View RelatedCan't Access Router Configuration To Get IP Address
Oct 31, 2011we recently got a new router and added it to our network... works fine the problem now is that i'm trying to add some other ip addresses to access wireless internet (for security reasons the wirless internet is available only to one set of ip addresses) but now that i try to access the router config to get that ip address in i cant access the router config. i try multiple addresses but still nothing. i try to find the ip using cmd but it just gives me tunnel 000000000
View 4 Replies View RelatedUnable To Access Router Address
May 26, 2012Im getting internet but i cant access my router address to get my config page. I had broadband wired internet a few days ago but now im using a wireless connection could that be the problem?
View 1 Replies View RelatedCan't Access Router Address / Server
Feb 2, 2013i have trouble accessing 192.168.0.254 for setting up my device. it says cannot access server.
View 1 Replies View RelatedD-Link DIR-615 :: Cannot Access Router Through IP Address Or Dlinkap
Nov 14, 2011I cannot access my router through IP address or dlinkap. I am trying to connect a bridge for the living room in my house.When I do an IPCONFIG my default gateway as weird characters in front of the actual IP fb23:ff23 etc.
View 4 Replies View RelatedNo Access To Wifi Router - Adding Mac Address Filter?
Apr 6, 2011I tried to configure my wifi router recently to secure my internet connection. I wanted to add a MAC adress filter, but I had to leave before I could enter them all. I thought that I wouldn't have to enter my own MAC adress since I'm directly connected to the router with a wire, but it looks like I should have entered my MAC adress, because now I can't get access to my router by typing the IP adress, as usual. I tried to reset it, but it doesn't work.
View 2 Replies View RelatedRouters / Switches :: Access Router Webpage With A Correct Address?
Apr 29, 2011I try to access my router web page with a correct address (192.168.1.1) but on my computer i have this message {Network Error (tcp_error)} but i can access this page from another computer through the network (WHY)
View 1 Replies View RelatedL-WR740N - Unable To Access Router Interface After Altering Its IP Address
Jun 17, 2012I've been trying to configure a TP-Link L-WR740N to act as an access point using the instructions here as a guide. As stated in the guide, I've been changing the IP address of the TP-Link router to a new address that lies outwith the pool of available DHCP addresses in my combined modem/router but with less than resounding success. After rebooting the TP-Link router, I am unable to access the set-up interface - the newly allocated IP address doesn't work, neither does the original IP address work. What is happening here? If I change the IP address to one that lies within the DHCP pool and reboot, I can access it ok with the new address. However, that obviously clashes with the set-up instructions.
View 1 Replies View RelatedLinksys Cable / DSL :: WAG120N Mac Address Cannot Be Multicast Address?
Jun 3, 2012I have been trying to clone my PC's MAC onto my Linksys WAG120N adsl2+ modem router .
I click the the clone my PC's MAC button in the MAC address clone tab. I get the following error :
"Mac address cannot be the multicast address"
The MAC address starts with 1C:C1:XX:XX:XX:XX
I even tried to update the firmware.
Linksys E2000 Router - Block LAN Mac Address?
May 10, 2011what would be the easiest way of blocking a mac address from LAN not wireless, the router is Linksys E2000 and the reason isnt important, just that i want to do it, i have full access to router
View 7 Replies View RelatedLinksys Wireless Router :: E4200 Not Getting IP Address?
Dec 21, 2011I have a 6 month old Cisco e-4200 router that is updated to the latest firmware, connected to a Motorola surfboard modem on Sudden-link in Midland, TX.
I previously used this exact same setup on Cox Cable in Wichita, KS with no problems. Upon setting it up down here I cannot get the router to pickup an IP address. I have Power-cycled everything multiple times, did a complete reset and re-installation of the router software and still no luck. The Sudden-link techs have no idea what is wrong. They said that the modems signal is strong and everything should be working.
Actually I did get it to work once for a couple of days, however when redoing the surround sound system I had to unhook the cable line and it quit working and I haven't gotten it to work again since. I have tried unhooking everything. Turning it all off. Waiting for 5+minutes, and then reconnecting in order: First the modem, then an ethernet cable to the computer which will usually work. But as soon as I unplug the cable from the computer and plug it into the router it stops working.
Linksys Wireless Router :: E3000 No Address From ISP On WAN?
Apr 2, 2012I have an e3000 that cannot obtain an address from the ISP. I can get an address on the computer and an old router by directly connecting the cable to the computer or the router. I can also daisy-chain the e3000 to the old router, and I can get an address on the e3000 from the old router. I have hard reset the e3000, changed firmware from the Linksys to TomatoUSB and back to Linksys, and I still can't get it to work. It worked fine on Saturday until a bolt of lightning hit close to the house. Since then, I cannot get the e3000 to connect to the ISP.
View 9 Replies View RelatedLinksys Wireless Router :: WRT54GL V1.1 Cannot Get IP Address
Feb 5, 2011Last week suddenly my internet connection failed. I have tried several times to establish the wireless internet connection. Everytime when i tried to do this, i get the message 'can not get IP address'. Already tried to upgrade the firmware but still same message appears.
View 4 Replies View RelatedLinksys Wireless Router :: Wrt54g 3.1 / No Wan Ip Address
Aug 6, 2012A few days ago I lost connection to the internet. The Status on the 54g does not show an IP address from the WAN(cable modem)If I connect the cable modem directly to the computer(wired) I can get online no problems. I can also access the 54g through 192.168.1.1. (wired)But if I connect the Cable modem to the 54g....no Internet This was my bootup.
1. Unplugged both cable and router.
2. Plug in cable wait for solid lights
3. plug in router wait for lights
4. plug in computer...connection established to router.... No Internet
Linksys Wireless Router :: E4200 Cannot Get WAN IP Address From ISP
Jun 28, 2012I just bought the Cisco e4200 v2 router, I did all the installations as the Cisco connect software instructed me and everything went fine.After the installation I configured the router on the WAN settings as (Automatic Configuration - DHCP), like my old router (Linksys WRT54GL) and I saw that my router doesn't get the WAN address from cable modem from my ISP(it stays on 0.0.0.0), it doesn't renew the IP address.
View 3 Replies View RelatedLinksys Wireless Router :: WRT54GL Cannot Get IP Address?
Nov 10, 2011I have Wireless-G Broadband router Model WRT54GL. Everything is all setup correct but consoles and handhelds can't get the IP address even if there connected to the router. It isn't intill I turn off and then it back on does it get the ip address.
View 2 Replies View RelatedLinksys E900 Wireless Router :: DPC3008 Gets No IP Address
Jul 18, 2012I have a Comcast modem, DPC3008 and a Cicso / Linksys E900 wireless router. When I connect my computer to the modem directly, it works great. when I use the router, I cannot conect to the Internet. The router is configured to use DHCP but on the status page, I never get an IP address. I have tried to release / renew the IP address from the status page but no luck.
View 5 Replies View RelatedLinksys Wireless Router :: EPC 2425 IP Address Of NAS Device?
Jan 2, 2012I have wireless Cisco Router, model number EPC 2425, which has a NAS device attached to it. I'm trying to find the IP address of the NAS device
View 1 Replies View Related
