TP-Link ADSL2+ Wireless :: TD-W8961ND - Cannot Access Virtual Server Port 80
Mar 22, 2013
Region : Others
Model : TD-W8961ND
Hardware Version : V3
Firmware Version : 3.0.0
ISP :
My router is TDW8961ND
The firmware version is 3.0.0
The hardware version is 3.0
I am trying to have a virtual http server at port 80 but when I do this and save, I get this message: "Notice: The WAN HTTP port of CPE will be chaged to 8080 if submit successfully."Then after that I cannot access the server at port 80.
View 2 Replies
ADVERTISEMENT
Jan 18, 2013
Region : Vietnam
Model : TD-W8961ND
Hardware Version : V3
Firmware Version : 3.0.0 build 120524 rel 05221
ISP : VNPT
Where is the PVC Ethernet Port Mapping in TD W8961ND?
View 1 Replies
View Related
Mar 10, 2013
Region : Italy
Model : TD-W8961ND
Hardware Version : V3
Firmware Version : 3.0.0 Build 120720 Rel.09287
ISP : alice
A couple of weeks ago I have bought a TD-W8961ND in replacement of my old modem/router (of another brand, to upgrade from Wireless G to N). I tried to replicate in the new router something similar to my old setup, so I programmed Virtual Servers (under the NAT menu) with the following rules: NATRules.jpg in an attempt to:
- grant access from "outside" Internet to my web server
- have a Wakeup-On-LAN from "outside" Internet ..etc.. without success. Please note that:
- I have successfully setup a DDNS server to reach my modem router from outside
- as for WOL, I defined my subnet mask as 255.255.255.128
- I have not set any other rule, nor in NAT, nor in routing or other
- I tried also with firewall disabled
- I do my testing by means of a smartphone with wireless disabled and Internet connection via mobile service provider
- Both the above mentioned functions were working with my old modem/router (and still work on LAN), and I have not changed other things (PC setup etc)
View 14 Replies
View Related
Apr 28, 2013
Region : UnitedKingdom
Model : TD-W8961ND
Hardware Version : Not Clear
Firmware Version : V.3
ISP : ADSL24
Using windows 7 and 8 on different machines I am unable access my routers web based set up.
I enter the usual "admin" and password in the login box. 3 goes and then get error message. or hangs on waiting.(connected to the router with Ethernet Cable). Could this be a windows based problem. I think it was ok on XP but that is gone now. Router is working fine but I just cant access it to alter any settings.
My 2 other spare routers which are not TP-link also have the same problem.
View 1 Replies
View Related
Mar 3, 2013
Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version : latest
ISP : french orange
I am trying to set up port forwarding on this router but it seems I need to use virtual servers but in all the guides there is a menu for this under the advance settings nat menu.I do not have that option, I have downloaded the latest firmware but still nothing.
View 1 Replies
View Related
Apr 1, 2013
Region : Spain
Model : TD-W8961ND
Hardware Version : V3
Firmware Version : 3.0.0 Build 120524 Rel.05221
ISP :
linksys1.jpg
I have wifi at home this link installed.
192.168.1.1 is a TD-W8961ND
192.168.1.4 is a linksys wrtt54gl
And I have two problems.
1) I can not see any desktops in my local net, and with old router I could see all, for example (diskstation, dm800, etc...) In my macbook air I can not see my NAS Synology and with old router I do.
2) All PCs that are conected to 192.168.1.4 have not IP. and DHCP in TD-W8961ND is activated.
View 5 Replies
View Related
Mar 15, 2013
Region : Argentina
Model : TD-W8968
Hardware Version : V1
Region : UnitedKingdom
Firmware Version : 101029
ISP : TalkTalk
I have version 1.1 and d/l'd firmware 111125. The upgrade ran successfully to 100% and then I got the login screen again. However after checking, then restarting to factory default the version displayed was still the old one
View 3 Replies
View Related
Nov 13, 2012
Region : Others
Model : TD-W8961ND
Hardware Version : V2
Firmware Version : 2.0.0 Build 120427 Rel.09135
ISP : True
I just bought the wireless router as stated in the subject and I cant get 2 of our PC�s to connect wirelessly for some reason. 4 other PC's are fineAll machines running windows 7, but when the authentication type on WPA2-PSK the 2 computers ask for a password which we put in but keeps saying its wrong, but infact its right.I can connect them on WPA-PSK, but then all the computers drop out after 30 seconds.
View 2 Replies
View Related
Feb 11, 2013
Region : Canada
Model : TD-W8961ND
Hardware Version : V2
Firmware Version : 2.0.0 Build 120608 Rel.34612
ISP : TekSavvy
NAT is enabled (under PVC2), as is UpNP
Whenever I enter all the info for a port forward under NAT in the virtual server tab, I click 'save' and nothing happens; chrome and firefox both give the same result.If I go to a different screen after pressing save and then come back to NAT settings, there's no entry updates and no port forwards.Should I install a different firmware (I can't find a newer version to install) or is NAT not supposed to work under PVC2? If I don't enter proper info (like leave the ports blank) I get an error if I press 'save', asking me to finish entering all the required info.
View 2 Replies
View Related
Feb 18, 2013
Model : TD-W8961ND
Hardware Version : V1
Firmware Version : 100722
ISP : Talk Talk
I've downloaded the firmware update 111125 and followed the instructions. The progress bar reaches 100% but the router doesn't seem to restart (judging by the status lights on the front). It does ask me to log back in but when I check the firmware version, it still reads 100722. I also tried factory default settings after the update. Still it reads 100722. I've tried the update 3 times now.
View 3 Replies
View Related
Nov 18, 2012
Region : Germany
Model : TD-W8961ND
Hardware Version : V2
Firmware Version :
ISP :
I need to set up an Internal and Guest WLAN. Out of security reason I'd like to separate both networks with VLAN's. Therefore I bought this Router TD-W8961ND and this Access Point TL-WA901ND.
SSID1 = AP1 -> VID 1 (Internal network)
SSID2 = AP2 -> VID 2 (Guest network)
How do i need to set up the router that both networks can use the Internet, but only AP1 can see the other internal computers?
View 4 Replies
View Related
Mar 27, 2013
Region : UnitedKingdom
Model : TD-W8961ND
Hardware Version : Not Clear
Firmware Version :
ISP : Solwise (Plusnet really though)
We need to replace the old modem for a small hotel, at the same time we are trying to expand the open (and free) public wifi that we currently offer in the bar area. Before our current modem/router went *PFFFT*, we had managed to get quite decent coverage using the 5 TP repeaters (TL-WA830RE) - but it was ALOT of work. Now we're hoping to replace with a TP modem to make the wifi setup easier.We also have 3 pc's, two wired and one wireless, that are for hotel use. We would like to keep these as separate and as safe as possible from the guest wireless, and i have been told VLAN is the best way to go.So, from what i have read on its spec's, the TD-W8961ND has both VLAN and QoS (which we would also like). It is also well within our price range.Given the setup we wish to implement, is the W8961ND the right idea? What considerations do i need to be bearing in mind for setup?
View 1 Replies
View Related
Apr 26, 2013
Region : Greece
Model : TD-W8961ND
Hardware Version : V1
I have a TD-W8961ND that I got for my Dads internet connection to replace the awful Zyxel Modem/router. Problem is that the TD-W8961ND is Annex A (euroDOCSIS)We actually needed a TD-W8961NB - Annex B (DOCSIS)I already know that it is possible to convert other routers from A to B and vice versa...Just wondering if there is any way of either cross flashing or if there is a conversion firmware for this router.
View 1 Replies
View Related
Mar 21, 2013
Region : Argentina
Model : TD-W8968
Hardware Version : V1
how to configure QOS on the TD-W8961ND so that the sip packets from a Linksys SPA2102 VOIP ATA which gets its IP address from the DHCP server in the TD-W8961ND is given priority over all other traffic regardless of whether such traffic comes from devices connected via ethernet or wireless to the TD-W8961ND. In my setup I cannot assign a static IP address to the VOIP ATA.
View 1 Replies
View Related
Feb 13, 2013
Region : UnitedArabEmirates
Model : TD-W8961ND
Hardware Version : V1
Firmware Version :
ISP :
I have two W8961ND, one for may office and the another one for use at my home, I tried to upgrade my device but during the upgrading the power supply plugged out and after that my device didn't boot up any more, so how can I repair my device, Is there any uploader for it's hardware chip because it doesn't work with it's LAN port or WIFI at this moment
View 1 Replies
View Related
Nov 29, 2012
Region : UnitedStates
Model : TD-W8961ND
Hardware Version : V2
Firmware Version :
ISP : ATT
I want to add more users to my home network and I couldn't, at this moment I only can connect 8 devices (12 devices at least) when I try to connect the next one its impossible, but if I take off one of the connected devices then the router allows to connect the new one.How can I connect more than 8 devices to my router ? (wireless)Also, is there any limits with Wireless MAC Address Filter ? because I can't add more than 8 MAC addresses in my old router I could do that.
View 4 Replies
View Related
Feb 9, 2013
Model : TD-W8961ND
Hardware Version : V2
Firmware Version : 120703
ISP : [/COLOR]
Region : United Kingdom
Model : TD-W8961ND
Hardware Version : V2
Firmware Version : 120703
ISP : Plusnet
I bought this recently on EBay and it works fine. I have just checked the firmware version and it displays as 120703 rel 29722. This version doesn't appear amongst the downloads - the most recent is 120427. Has somebody upgraded to the wrong software? Should I upgrade to 120427?
View 1 Replies
View Related
Nov 4, 2012
Region : UnitedStates
Model : TD-W8961ND
Hardware Version : V2
Firmware Version :
ISP : at&t
Having trouble setting up router for remote viewing my Swann DVR. I've gone to Advanced Set Up( NAT)to Vertual Server and added two rules for DVR one for port 85 and one for port 9000 both with the DVR's IP Add. of 192.168.1.165 Is there something else I should do?
View 3 Replies
View Related
Mar 29, 2013
Region : UnitedKingdom
Model : TD-W8961ND
Hardware Version : Not Clear
Firmware Version : 3.0.0
ISP :
I was using dsl connected to pc with ethernet cable, on line streaming movies were fine, now with TP LINK ADSL2+MODEM ROUTER streaming has become very very slow using wireless, signal is excellent, web surfing is fine, do I need to change setting to improve streaming?
View 1 Replies
View Related
Nov 15, 2012
Region : Thailand
Model : TD-W8961ND
Hardware Version : V1
Firmware Version : 2.0.0 Build 111111 Rel.1111
ISP : 3bb
I have a problem when I am trying to add another static ip address to the list
the message above in title pop up, how can I fix it?
DHCP Table is Full!
View 1 Replies
View Related
Oct 16, 2012
Region : Egypt
Model : TD-W8961ND
Hardware Version : V3
Firmware Version :
ISP :
my router is placed in my home. i want to access to it with IE from my office.but no luck.also i try to ping the WAN ip address of the router.
View 2 Replies
View Related
Oct 31, 2012
Region : Ireland
Model : TD-W8961ND
Hardware Version : V1
Firmware Version : 1.0.0 Build 111125 Rel.28195
ISP : Eircom
I'm trying to set up external Wake On Lan with my TP Link router.
I can get it working internally using the mac address I'm just wondering how do I do it remotely?
View 7 Replies
View Related
Apr 7, 2013
Region : UnitedKingdom
Model : TD-W8961ND
Hardware Version : V3
Firmware Version : 3.0.0 Build 120524 Rel.05221
I have just bought this ADSL router. Of course, the first thing I did was upgrade the firmware, or so I thought.It seems that the firmware on the TP website is older than the one which was pre-installed onto the router.Website Firmware: 3.0.0 Build 120524 Rel.05221 ------------- i.e. 24.May.2012 Release 05221.Pre-loaded Firmware on router: 3.0.0 Build 120808 Rel.28888 -------------- i.e. 8.August.2012 Release 28888.I have foolishly uploaded the older firmware to the router from the website. I wanted to see what version number showed in the Router's Firmware page so I did a ROM backup, thinking I could always reload the "current" firmware. As it turns out, the ROM file is just the user settings backup.
It is sad that TP-Link doesn't provide change logs. Where to find later firmwares, or even what the change to the firmware was?And when we can expect a new firmware to be uploaded to the website?
View 1 Replies
View Related
Apr 6, 2013
Region : Canada
Model : TD-W8961ND
Hardware Version : V2
Firmware Version : 120608
ISP : Distributel
I've just installed this router today, connected physically 2 PCs, a PS3 and a VoIP and everything works fine !
The problem is with the WIFI connection ! my devices see the WIFI network, they connect, but I cannot connect to the internet ...
What settings Should I turn on/off or any config I should tweak ?
View 4 Replies
View Related
May 10, 2013
Region : India
Model : TD-W8961ND
Hardware Version : V3
Firmware Version : S/N: 12B79605315
ISP : BSNL Data One
I had Purchased a brand new TP-Link WifI Modem Router TD-W8961ND with S/N : 12CB5200872 from [URL] and it got delivered few days back. When I am trying to connect it to the internet the modem is not getting connected nor configured. The Power button light, ADSL Light and internet light are continuously blinking and nothing is getting steady. The modem is appearing to be a damaged piece of modem and it is very unfortunate that we have got a modem from flipkart in an unserviceable condition. It came with a warranty of 03 years and I wanted a replacement so that I can use the modem for connecting internet.
View 1 Replies
View Related
Mar 20, 2011
I wonder what the difference is between the virtual server and the port forwarding because the router I was using previously had only port forwarding. When should I use virtual server instead of port forwarding?
View 1 Replies
View Related
Mar 10, 2013
When can we have an upgrade to include 'Lookback' function for Virtual Server ? I understand both Build-120802 and Build-120926 does not support this Loopback feature. Without the loopback feature, we won't be able to test out Dynamic DNS URL is working or otherwise on local PC.
View 1 Replies
View Related
Feb 24, 2013
Region : Mexico
Model : TD-W8968
Hardware Version : V1
Firmware Version : the last version of this web page, i forgot number
ISP : TELMEX (infinitum)
i have some problems to configure the port forwarding in my router, don't it work ! but the port number 80 it works with my sub-domain in the internet. after i change this port to 8080 still dont work the port forwarding. the FTP server its ok.
[code]......
View 3 Replies
View Related
Nov 18, 2012
Region : Italy
Model : TD-W8968
Hardware Version : V1
Firmwae Version : latest
ISP : telecom italia business on ipatm
How to Forward an external wan port like 49150 to lan ip on port 22?In the control pannel I can set only one port , and this port will be the same where the connection will be router to the lan ip ,therefore If I set the port 22 , the connection will be natted to the 22, but how to set a different external port to a specified different lan ip port?
View 1 Replies
View Related
Mar 7, 2013
Region : UnitedKingdom
Model : TD-W8970
Hardware Version : V1
Firmware Version : 0.6.0 0.11 v000c.0 Build 121203 Rel.46289n
ISP : Virgin Media
Is there any way of forwarding an external port to a different internal port on the TD-8970 ?I saw a question posed on an Australian forum implying that it might be provided in a later firmware release.Our TD- 8970 has replaced a previous NetGear WAG 320N which had this facility, and is useful to provide access to multiple machines without having to modify each individually to use a different port.
View 1 Replies
View Related
Nov 29, 2012
I have DIR-601 wireless router with two computers connected: Server (192.168.1.2) and Client (192.168.1.3 on Ethernet Port and 192.168.1.4 on Wireless)
I also use dlinkddns.com and my router's public IP is mapped as abc.dlinkddns.com.
In the router Virtual Server section, it is configured as:
Public Port: 3389 (for Remote Desktop)
Private Port: 3389
IP Address: 192.168.1.2 (server's IP)
I am expecting this to allow the client to access the server via windows Remote Desktop.
The current situation is:
- When wireless is on, the client can access the server's Remote Desktop
- When wireless is off and client is connected by wired Ethernet, the client cannot connect to the server's remote desktop. After timeout, the error msg is "Remote Desktop can't connect to the remote computer for one of these reasons: ...".
- When the client is in another network, it can connect to the server through the Internet.
I am sure it's not the client's problem because it can access via wireless or remotely from another network. It's not the router's virtual server config problem for the same reasons. Will it be a bug in the router? (hardware version: B1, firmware version: 2.00NA).
View 1 Replies
View Related
Nov 8, 2012
Region : UnitedKingdom
Model : TD-W8960N
Hardware Version : V3
Firmware Version : 1.4.0 Build 111130 Rel.55990n
ISP : BT Broadband
Just got myself a new Modem/Router (TD-W8960N), and it wasn't until I had it all up and running that I realised it didn't have USB port on the back.Anyways, I was wondering how I could go about fixing this? I stumbled upon this (TP-Link TD-8817) on Amazon and wasn't sure if I could attach this to it in bridged mode or something. This has the USB socket I need. If this was all I needed, how do they connect together? I have a BT connection btw.Also, I have a Justop Android 4.0 TV Box (media player). Would this be able to see the HDD for streaming movies.
View 2 Replies
View Related
Jan 1, 2013
Region : India
Model : TD-W8951ND
Hardware Version : V1
Firmware Version : 5.0.0
ISP : Beam Telecom
I recently bought this device in hurry . My ISP has directly connected RJ45 cable to my laptop .So i need to use this device for sharing internet to my wireless devices .IS it possible to convert Rj45 to Rj11 if so let me know the process .I have seen interenet about converting lan port to wan for TD-W8960 device . but GUI administration is quite different for my device .
View 1 Replies
View Related
