D-Link DIR-601 :: Virtual Server For Wire And Wireless Connection?
Nov 29, 2012
I have DIR-601 wireless router with two computers connected: Server (192.168.1.2) and Client (192.168.1.3 on Ethernet Port and 192.168.1.4 on Wireless)
I also use dlinkddns.com and my router's public IP is mapped as abc.dlinkddns.com.
In the router Virtual Server section, it is configured as:
Public Port: 3389 (for Remote Desktop)
Private Port: 3389
IP Address: 192.168.1.2 (server's IP)
I am expecting this to allow the client to access the server via windows Remote Desktop.
The current situation is:
- When wireless is on, the client can access the server's Remote Desktop
- When wireless is off and client is connected by wired Ethernet, the client cannot connect to the server's remote desktop. After timeout, the error msg is "Remote Desktop can't connect to the remote computer for one of these reasons: ...".
- When the client is in another network, it can connect to the server through the Internet.
I am sure it's not the client's problem because it can access via wireless or remotely from another network. It's not the router's virtual server config problem for the same reasons. Will it be a bug in the router? (hardware version: B1, firmware version: 2.00NA).
View 1 Replies
ADVERTISEMENT
Mar 3, 2013
Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version : latest
ISP : french orange
I am trying to set up port forwarding on this router but it seems I need to use virtual servers but in all the guides there is a menu for this under the advance settings nat menu.I do not have that option, I have downloaded the latest firmware but still nothing.
View 1 Replies
View Related
Mar 22, 2013
Region : Others
Model : TD-W8961ND
Hardware Version : V3
Firmware Version : 3.0.0
ISP :
My router is TDW8961ND
The firmware version is 3.0.0
The hardware version is 3.0
I am trying to have a virtual http server at port 80 but when I do this and save, I get this message: "Notice: The WAN HTTP port of CPE will be chaged to 8080 if submit successfully."Then after that I cannot access the server at port 80.
View 2 Replies
View Related
Apr 25, 2012
I have an DLINK-dir 815 router.. I have tried for 10 hours to get broadcast IP to work, no luck.. All html/javascript modifications = no luck..The WOL works on LAN, but not over internet, so I figure it's the broadcast IP that needs to be virtual servered?
View 9 Replies
View Related
Mar 20, 2011
I wonder what the difference is between the virtual server and the port forwarding because the router I was using previously had only port forwarding. When should I use virtual server instead of port forwarding?
View 1 Replies
View Related
May 17, 2011
I have several ports opened on my DIR-655 A3, pointing to specific ports on a NAS server i have on my network.
I've already try this:
- Reboot the router
- Erase all Virtual Server Settings and try open only one port
- Re-flash the router with latest European firmware - 1.34b05EU
View 11 Replies
View Related
Feb 8, 2012
I've got a DIR-825 RevB Firmware V2.06NA on a static IP wan connection routing to a SBS2008 server and 10PC's. The server is serving mail, web, and files. Router has virtual servers setup for http, https, smtp, imap, imapssl, smtpssl, pptp, remote desktop, and a few others.
Everything works fine, but the routers https forwarding stops running periodically about half an hour after reboot. The server's working fine, but it doesn't see the https request, it looks like the router is trying to serve the 443 request itself. After a router reboot everything is back to normal.
I've replaced the router with another dir-825 and it has the same issue.
View 3 Replies
View Related
Nov 4, 2011
Why is loop-back only working on ports forwarded in the Virtual Server section and not Port Forwarding or even DMZ? I have seen a post about loop-back on the DIR-655 from a while ago that had said to disable SPI and change NAT Endpoint to independent, I have done this and loop-back still doesn't work.
View 1 Replies
View Related
May 16, 2011
my printer connect wit desktop,pc is connect to router for net.. is it possible to take print out through laptop without conect any wire connection to printer???
View 1 Replies
View Related
Nov 9, 2012
Region : Argentina
Model : TL-WR1043ND
Hardware Version : v1
I have read how to configure the Virtual Servers - Forwarding url...and added two entries, one for port 44612 and one for 32680 , my pc ip is 192.168.0. 100.Before I installed the router (my pc was connected directly to the lan connection) all was working just fine.And I double checked that the ports are not being blocked by firewall.
View 4 Replies
View Related
Jun 6, 2011
What is the best virtual software to run on the server
View 1 Replies
View Related
Feb 27, 2013
Region : Italy
Model : TD-W8970
Hardware Version : V1
Firmware Version : 0.6.0 1.2 v000c.0 Build 130201 Rel.54921n
ISP : wind infostrada
TD-W8970 Wireless connection problems|
Region : Italy
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.2 v000c.0 Build 130201 Rel.54921n
ISP : Wind Infostrada
That's a wonderful router on the paper! Really it has some problems with the wireless connection and the dhcp server. After 2 days of i must forced to reset the router because it refuse any wireless connection while the internet browsing on the other pc connected via ethernet ARJ45 is very slow.To complete the scenario the router doesn't allow any acces to his console page ..so what's the problem?
I try to change any channel for the wireless without no positive result.I bought it on amazon but if this situation will continue without any solution from tp-link i will forced to send it back with a totally negative feedback on the product.
View 5 Replies
View Related
Mar 22, 2011
i want to know what is the type of wire used for a dsl connection
View 1 Replies
View Related
Jun 11, 2012
I have uninstaled my driver by mistake where can i get it from?
View 1 Replies
View Related
Mar 10, 2013
When can we have an upgrade to include 'Lookback' function for Virtual Server ? I understand both Build-120802 and Build-120926 does not support this Loopback feature. Without the loopback feature, we won't be able to test out Dynamic DNS URL is working or otherwise on local PC.
View 1 Replies
View Related
Aug 10, 2012
Sometime in the past month my virtual server has been serving slow speeds to a majority of places when I used to get 500KB/s + speeds down and 250KB/s speeds up regularly. My home network is Verizon Fios 15/5 and speedtest.net reports exactly those speeds at any test server I choose.
I've been going back and forth with my virtual server host (1and1) about my virtual server download and upload speeds. I've done a lot of testing to see if there is packet loss with WinMRT and also traceroutes from a couple locations.1and1 has done testing and verified it's NOT their network causing the slow downs as their download tests have returned fast speeds. I've tested at about 8 locations to download this file ( [URL] I can assure you that link is safe, it's just a zip of the .Net 4 redist pacakge) and 6 out of the 7 get speeds ranging from 10kb/s-50kb/s, only 1 out of the 7 gets 400kb/s+ download speeds and that is located in Chicago, 4 are from Los Angeles area and 2 from Denver area and one from Orlando area.
Is it possible to get some users (Preferably West Coast USA) here to download and report the speed it downloads, location they are at, and the internet provider and package they have? If I cannot find the cause of this, I may have to move to a different virtual server provider which takes a lot of configuration for my server because of the nature of it
View 1 Replies
View Related
Sep 29, 2011
I'm having trouble connecting my client/server in my virtual PC. they just aren't seeing each other when it comes to connecting them to continue my server class.
server 2003 windows xp running on virtual PC I'm running windows 7 on my computer
View 4 Replies
View Related
Jul 18, 2011
I'm trying to connect my computer to our router with no success. Windows doesn't detect the wire when I plug it in, no matter which one I use. This has never been a problem before I recently installed Windows 7 HP.I had no wireless connection to the router either after I installed the new Windows, but following an answer to a remotely similar question in the forum fixed it ('scan for hardware changes' on "Realtek Wireless LAN" under Network Adapters in Device Manager)
View 8 Replies
View Related
Feb 24, 2013
Region : Mexico
Model : TD-W8968
Hardware Version : V1
Firmware Version : the last version of this web page, i forgot number
ISP : TELMEX (infinitum)
i have some problems to configure the port forwarding in my router, don't it work ! but the port number 80 it works with my sub-domain in the internet. after i change this port to 8080 still dont work the port forwarding. the FTP server its ok.
[code]......
View 3 Replies
View Related
Dec 31, 2011
I don't see a forum for the DIR-665 so I am posting this here.I have setup my network using the DIR-665. I can print to my network printer (not plugged into router usb it is a Network printer) from WIN XP and Mac Snow Leopard and Lion via a network cable.
When I connect to the router via WIFI it shows the printer is ready. Then I click print and it starts trying to find the printer but then fails saying the printer is not on the network.
View 14 Replies
View Related
Nov 25, 2012
I'm trying to set up a load balancer within an OVH (hoster) infrastrcture, I've followed their instructions [URL] I'm using a RIPE block (5.135.193.xxx/28) and would like the first 8(5.135.193.xxx/29) to be used as the virtual server.vlan 2676 is the local one, and vlan 1227 is the public one.After all the config steps, none of these IPs are responding to a ping, nor a direct http request.
the full configuration is :
=============================================
ssh maxsessions 1
access-list ANY line 8 extended permit icmp any any
access-list ANY line 16 extended permit ip any any
probe tcp PROBE_TCP
passdetect interval 30
[code]....
View 5 Replies
View Related
Mar 8, 2013
Region : US
Model : TL-MR3040
Hardware Version : V1.0
Firmware Version : 3.12.11 build 120328 ref. 63398
i just got a new TP Link TL-MR3040 V1.0.While setting up the router page on wireless and saw the firmware is an old version 3.12.11 build 120328 ref. 63398.Did a check on the TP link site and there is a new firmware update TL-MR3040_V1_120822.I have downloaded the new firmware but dont know how to do it. Read the confusing "how to guide ......" but was stated "Do NOT upgrade the firmware via wireless connection"
Question : how to connect with LAN wire ? Try plugging btw the computer LAN and the router LAN.... can't access the 192.168.0.1
Question : any proper step-by-step guide on how to update the firmware?
View 1 Replies
View Related
Feb 21, 2013
Region : Hongkong
Model : TL-WDR3600
Hardware Version : V1
Firmware Version :
ISP :
When using the USB printer port share function, I found that some PCs, which had never physically connect to a USB printer before, will not have the virtual USB printer port in the port selection. In this way, TP-Link's USB printer controller will not be able to setup the connection. The PC will not be able to use the shared printer from my WDR3600.how can I create a virtual USB printer port in the remote PCs (without need to physically connect a printer to them) or other method to use the shared printer?
View 5 Replies
View Related
Jan 5, 2011
I have a question regarding CSS loadbalancer. Let's say there are 2 vlans in CSS:
1. Vlan 10: 10.1.1.0/24 as external interface, interface where most of the clients are coming from.
2. Vlan 20: 10.1.2.0/24 for real server vlan.
Virtual IP 10.1.1.10 is created in CSS on behalf of two real servers (10.1.2.11 & .12) in Vlan 20. Client from Vlan 10 can http access to 10.1.1.10 successfully.
In Vlan 20 there's also few clients which need to access servers via virtual IP. Vlan 20 Client PC (10.1.2.101) can ping 10.1.1.10, but can't access 10.1.1.10 http service.
Is there any way for CSS to forward service request coming from Server vlan to be send back to the same segment?
View 9 Replies
View Related
Jan 22, 2012
it was possible to install RSA Authentication Manager server into the ACS 5.3 Virtual Machine ?
View 0 Replies
View Related
Dec 21, 2012
Am running firmware ver 1.00.19. Set up DDNS with DynDns.Org and all is well. Set up virtual server with DDNS info. Trying to connect to an IPcam (Foscam 8905W). IPcam is set up with static IP with ip outside Belkins DHCP range.
Problem: When trying to access the IPcam through the internet (DynDns) Belkin takes me right to the Belkin router Setup screen, not to the virtual server settings (IPcam). I was able to do it a couple of months ago,but not now. I may have upgraded my firmware in that time from 1.00.12.
View 4 Replies
View Related
Feb 11, 2013
When I create a virtual switch on hyper v, i lose network connectivity and the default gateway is missing I have to manually put the default gateway in and disable and re enable the network adaptor each time the server restarts in order to get network connectivity. I am running windows server 2012 Hyper V Virtual Ethernet Adapter loses default gateway server 2012
View 9 Replies
View Related
Feb 23, 2012
Having router issues that is definitely not the routers fault, and most likely not the modem's. I currently have a DIR-655 in place here but have gone through 4 routers and 2 modems trying to resolve this problem.we were having trouble staying connected to a terminal server and would lose access to its URL which is set up with DynDNS. We switched service providers and all was well for a wile until our wireless started to drop, at the time we had a Netgear VPN and a Netgear Access point, and the network would just drop until the router was rebooted, sometimes 2-3 times a day and it would become a morning ritual to reboot the modem/router first thing.We removed the Netgear AP and turned on the wireless on our VPN and tried that along with a new modem, we replaced both with a Cisco VPN with wireless, we migrated to a software vpn solution and installed the current D-link router and the next day the same thing happened, I then replaced the power strip that was feeding the router and modem and that fixed.
View 3 Replies
View Related
Feb 2, 2011
Running a Windows 7 laptop plugged into a LAN using ethernet cable with internet.The built-in wireless nic on the laptop connects to a totally different internet network. I set up an XP Mode Virtual PC on the laptop with the intention that it would use the wireless internet connection.I set this up by installing Microsoft Loopback Adapter, then sharing the wireless nic to it. The Virtual PC is set to use the Microsoft Loopback Adapter as its network connection.My problem is that only the hard wired internet connection works.The wireless is connected and has an ip address, however no traffic flows through it until i either disable the cabled network or physcially unplug the cable. Is it possible to have my host laptop use the cabled internet connection and my virtual pc use the 2nd wireless internet?
View 1 Replies
View Related
Jan 11, 2012
One of the persons involved in a home network has installed a Dlink DIR-825 Rev-B Extreme router on the Comcast cable system to allow a 'better' wireless signal on upper floors of the home. Two others involved in the same home network use a 'secure desktop access' software called NetOp to access the network remotely. To facilitate this software, we must 'port forward' port 6502 on BOTH UDP and TCP to the single system that is accessed.
However, this setup (simple port forwarding) does not seem to work - neither does 'virtual server', for that matter. Prior to this router being installed, it was extremely simple to accomplish this remote access using a Linksys router, so our software firewall configuration has not changed but the new Dlink seems unable to allow remote access.
How (and via which of these access methods - port forwarding or virtual server) would be best? This configuration seems frustratingly difficult to accomplish and I'm about to take the Dlink 'out' of the network and re-install the Linksys with a 'high-gain' external antenna to facilitate simple signal enhancement.
View 3 Replies
View Related
Mar 5, 2013
I just bought this to replace a working Linksys but wanted gigabit so after reading a lot of reviews this is the one I picked up. So tell me what is the magic toggle to get port forwarding to work or virtual servers? I've configured them on Linksys, netgear, Cisco, etc 100 times with no problems. Nothing I configure on this confounded thing works. I've setup 6 port forwards, RDP, FTP, VNC and none of them work. Nothing. "Connection timed out" when trying to connect. This works on my other router just fine so its not my software, or my PC configuration as they have no changed. Ports are correct.
View 2 Replies
View Related
Apr 15, 2011
I installed virtual pc 2007 that has winXP and my host is Windows vista. I was able to make my virtual pc to connect to host internet using NAT for adapter 1 long time ago without any problems but it is not working anymore since last month! Although it works when I try it on another host. I believe the problem is in my host so what to check excatly in my host.
View 1 Replies
View Related
Feb 18, 2013
Implement the procedures required so that machine 1 and machine 2 can communicate statically with one another. Outline the TCP/IP settings to be used on each of the machines and set this machine up accordingly.
I followed this guide [TUT] Setting a static internal IP (Windows and Linux)but what has happened is that now the two machines can't connect to the internet.
View 7 Replies
View Related
