Belkin Routers :: N600db-F9K1102V1 Ignores Virtual Server Settings?

Dec 21, 2012

Am running firmware ver 1.00.19. Set up DDNS with DynDns.Org and all is well. Set up virtual server with DDNS info. Trying to connect to an IPcam (Foscam 8905W). IPcam is set up with static IP with ip outside Belkins DHCP range.

Problem: When trying to access the IPcam through the internet (DynDns) Belkin takes me right to the Belkin router Setup screen, not to the virtual server settings (IPcam). I was able to do it a couple of months ago,but not now. I may have upgraded my firmware in that time from 1.00.12.

View 4 Replies


ADVERTISEMENT

Belkin Routers :: N600DB - Can Use As Usb Hub To Connect 2 Devices

Feb 3, 2013

New N600 DB router, has one usb connection. Can I use a usb hub to connect both a printer and a hard drive?

View 2 Replies View Related

Belkin Routers :: N600DB - Parental Control Not Available?

May 22, 2013

I have an Belkin N600DB F9J1102 modem router but it doesn't have a PARENTAL CONTROL in the Utilities section as mention in the manual.

View 1 Replies View Related

Belkin Routers :: N600DB - Cannot Open Routers Homepage

Mar 21, 2013

I have the N600DB Wireless Router I am connected to the internet, but cannot open My Routers Homepage with http://router or http://192.168.2.1. How can I get to this page to reset the router settings? I also cannot connect any of my wireless devices to the network..

View 1 Replies View Related

Belkin Routers :: N600DB IP Reservation For Connected Devices

Apr 24, 2013

I purchased the Belkin N600DB, but I can't seem to find a way to reserve IP addresses for my connected devices. I need to run a server through the router, but (naturally) it keeps changing my local IP address. I cannot find the reservation utility.

View 1 Replies View Related

Belkin Routers :: N600DB / 5Ghz Network Not Visible

Jan 8, 2013

In my new laptop with os windows 8 my 5Hz network is not visable.My 2.4Ghz network is the only one that is showing.

My Router is a Belkin N600DB

Hardware F9K1102 v1
Firmwareversie 1.00.19 (Jul 6 2012)
Versie opstartprocedure v0.07

View 1 Replies View Related

Belkin Routers :: N600DB As Wireless Range Extender?

Jan 29, 2013

Can I set up n600 db F9K1102v1 as wifi range extender with no rj45 cable?

Dont have cable infrastructure in section of building where i need net access.

Have a Cable/Modem (wireless) as main router and need to extend the signal using the N600DB - but without cat5 cable between modem/router & N600.

View 3 Replies View Related

Belkin Routers :: N600DB Access Control Doesn't Work

Apr 13, 2013

I'm trying to get 'Access Control' working so I can limit Wi-Fi time on my kids iPod touches, but the settings aren't clear and the help file is not clear whatsoever.I've been testing it with my iPhone, I have the MAC added, but none of the options available will even stop my iPhone accessing the internet over my Wi-Fi.

View 1 Replies View Related

Belkin Routers :: N600DB - Temporarily Lose Connection During Reboot

Mar 23, 2013

N600DB - Currently configured with primary computer hardwired to router, 1 laptop via WiFi, a Network booster used by iPhone/iPads and every time I wake the primary computer I get the Router Monitor alert that my internet connection has failed. By the way, I am currently using the primary computer to post this and the Belkin Router Monitor still says my "internet connection has failed" and An Internet connection cannot be established at this time. Re-booting your router may solve this problem, but you will temporarily lose your connection during the reboot.

View 1 Replies View Related

Belkin Routers :: Stop N600db From Indexing All Files On Connected Drive?

Mar 26, 2013

I have a 1TB hard drive connected to my N600DB that I use as a media server to my kids Xbox... My problem is that I use this drive to back up all my data from my laptop, including movies, pictures and music. I only want to share the movies... I have over 5000 pictures alone so my router never gets to index all the movies I want to share..

P.S. I have the F9K1102 v1 with Firmware 1.00.19

View 1 Replies View Related

Belkin Routers :: N600DB Using Router As Access Point / Range Extender

May 16, 2013

I have a N600DB configured as a primary router. I got another playmax n600HD router which I want to configure as an access point that extends my network upstairs and allows me to attach some wired devices like my ps3. I followed the basic principles of setting as access point and my locally connected ps3 and NAS are communicating but no Internet access. How the 2nd router can connect to the internet?

View 2 Replies View Related

D-Link DIR-655 :: Virtual Server Settings Doesn't Work Anymore

May 17, 2011

I have several ports opened on my DIR-655 A3, pointing to specific ports on a NAS server i have on my network.

I've already try this:

- Reboot the router

- Erase all Virtual Server Settings and try open only one port

- Re-flash the router with latest European firmware - 1.34b05EU

View 11 Replies View Related

Can't Get Belkin N600db To Detect F5d9231 (access Point Mode)

Oct 11, 2011

I assigned the access point a static IP 192.168.2.50 within the router IP range. My computer wireless card is detecting the access point but I can't get the belkin n600db to detect the access point.

View 12 Replies View Related

Linksys Wireless Router :: E4200 Media Server Ignores Folder Hierarchy?

Jan 5, 2012

I have a 1TB drive attached to my E4200 that contains several videos sorted in a folder hierarchy, like this (these are just examples):
 
TV Shows
Supernatural
01. Episode 1.mp4

[Code]....
 
As you can see, all of my videos are in a carefully constructed heirarchy.  This works with my old media server (Rivet for Mac).  On the E4200, however, all of these MP4 files are merged together.  My Xbox shows folders like "Albums" and "By Date", but these don't really mean anything -- all of my videos are jumbled into these folders and there's no way I can find anything.
 
Here's how the media server is configured:
  
If I can't find a solution, than the media server feature of this router is absolutely useless to me. 

View 2 Replies View Related

Belkin Routers :: Can't Get To Settings Page On N150

Feb 25, 2013

After our ISP had a network outage, our Belkin N150 stopped working properly & now I can't get to the Settings page to fix anything. I have used the Reset feature to no avail. The blue light is on but the "Fixit" feature only comes up with something about the ASDL line.

View 1 Replies View Related

Belkin Routers :: F9K1103V1 - Configuration Settings?

Nov 8, 2012

I have tried every which way to configure my model F9K1103V1. It is either impossible or beyond my level of expertise.

View 1 Replies View Related

Belkin G Wireless CC7A57 - Can't Access Routers Settings

Jul 23, 2011

Earlier today I put in a password for my Belkin_G_Wireless_CC7A57 router. I had to change something, im not sure what it was. it was like WPA or WAP. now it wont let me go to my router settings 192.168.2.1 in the address bar is how i have been getting to it. now it just takes me to a OOPS google chrome cannot open this web page..... I just want to restore the router to it factory default settings. it will let this laptop on and another one in the house but not an older one we have which runs Windows XP. If i can get to my router settings i will be fine..

View 2 Replies View Related

Belkin Routers :: F5D8235-4 V3 Save Settings Before Reset?

Jan 4, 2013

Is there a way to avoid network interruptions when resetting the F5D8235-4 v3 router? I was hoping to find a config file or some other way to avoid having to reset the home network and devices. The administrator password has been lost, so i would like to reset that only and not restore factory settings.

View 1 Replies View Related

Belkin Routers :: Two F9K1112 - Connection Settings To Extend Network?

Feb 8, 2013

I have F9K1112 router(#1) connected to my Mototola SB6120-Modem. I connected a F7D6301 V3 router(#2) to router #1 To extend the network. But it does not work. What settings do i need to set on router number 2 for it to provide me extended service?

View 3 Replies View Related

Belkin Routers :: N750 Required Settings For Cisco DPC3008 Modem

Jan 20, 2013

Recently switched DSL providers and now have Cisco modem DPC3008. Able to connect to internet directly thru modem. Able to connect wired or wireless to router. Unable to get router to connect to internet via modem. Tried restart, reset, and new set-up. Called ISP (Charter) - no way, said contact Belkin.

View 2 Replies View Related

Belkin Routers :: G MIMO F5D9230-4 - Settings Changed Now Won't Connect To Internet

Dec 14, 2012

I believe we accidentally changed the NAT on our wireless g MIMO F5D9230-4 router. Now only one laptop is actually connecting to the Internet, but it looks like our network isn't secure anymore. Our 2nd laptop is connected wirelessly to the router, but not the Internet. Our iPhones and iPad are not connecting at all.

View 1 Replies View Related

Belkin Routers :: N750 Cannot Connect To Firmware Information Server

Oct 25, 2012

I have a n750 and I did the firmware update on the router and I have it check for firmware updates when I log in and i keep getting this message: "Cannot connect to the firmware information server,please double check the WAN connection." I have access to the internet.

View 14 Replies View Related

Belkin Routers :: N450 Router Will Not Assign The DNS Server Address

May 4, 2013

It took a while of troubleshooting since I've never ran into this problem with my wireless router before. But finally I figured out that my router will not assign the proper DNS server addresses when assigning through DHCP. I upgraded from 2.10.02 and still the same issue.

View 1 Replies View Related

Belkin Routers :: Determine If F5D7230-4 Ver1 Supports DLNA Server?

May 25, 2013

I am running "PLEX Media server" on a PC and have a "Roku" client working perfectly on my home network

I am trying to use the "My PLEX" feature of "PLEX" to stream my content to the internet and access it on a Nook or iPod from any internet hot spot. This requires that the router supports DLNA. I am not sure what this is and am not successful at this so far.

Although it may sound like I know what I'm talking about I am at my limit and do not know how to determine if my router will support DLNA.

Is it time to get a new router or is there something I need to do to the router so it supports DLNA?

View 1 Replies View Related

Belkin Routers :: Connecting Two AC1200 - Only One Should Act As DHCP Server And Broadcast Wireless?

Jan 13, 2013

I have two AC1200 routers? how do i connect one ac1200 to another ac1200. Only one should act as a DHCP server and broadcast wireless; the other should be simply just a hub (vs. me having to buy a separate hub). What are the correct settings and connections?

View 1 Replies View Related

Belkin Routers :: Wireless Print Server F1UP0002au / Windows 7 And 8 Compatibility?

Mar 10, 2013

Whether the wireless print server (F1UP0002au) operates under windows 7 and windows 8?

View 1 Replies View Related

Belkin Routers :: N750 Disconnects On Occasion When HP Media Smart Server Is Online?

Oct 26, 2012

I have an issue with my N750 Wireless router, F9K1103. I have a Windows Home Server, HP Media Smart Server – EX470, that at times causes the router to lose connection, with the front panel light going from Blue (connected) to Orange (disconnected). When I pull the net cable from the server, after about 30 seconds the blue light comes back on.

View 1 Replies View Related

Belkin Routers :: AC900 / Windows Live Mail - Server Has Unexpectedly Terminated Connection

Nov 20, 2012

I replaced a similar router from a competing company with the AC900 N900 router. I open Live Mail (IMAP) and keep it open during the day. Since switching over, when I periodically look at email on Live Mail, I frequently get a "Windows Live Mail" message saying "Your server unexpectedly terminated the connection. Possible causes for this include server problems, network problems, or a long period of inactivity." I have never received this message from either one of the previous routers - LinkSys, Netgear.

View 7 Replies View Related

What Is The Best Virtual Software To Run On The Server

Jun 6, 2011

What is the best virtual software to run on the server

View 1 Replies View Related

Slow Speeds Up / Down From Virtual Server?

Aug 10, 2012

Sometime in the past month my virtual server has been serving slow speeds to a majority of places when I used to get 500KB/s + speeds down and 250KB/s speeds up regularly. My home network is Verizon Fios 15/5 and speedtest.net reports exactly those speeds at any test server I choose.

I've been going back and forth with my virtual server host (1and1) about my virtual server download and upload speeds. I've done a lot of testing to see if there is packet loss with WinMRT and also traceroutes from a couple locations.1and1 has done testing and verified it's NOT their network causing the slow downs as their download tests have returned fast speeds. I've tested at about 8 locations to download this file ( [URL] I can assure you that link is safe, it's just a zip of the .Net 4 redist pacakge) and 6 out of the 7 get speeds ranging from 10kb/s-50kb/s, only 1 out of the 7 gets 400kb/s+ download speeds and that is located in Chicago, 4 are from Los Angeles area and 2 from Denver area and one from Orlando area.

Is it possible to get some users (Preferably West Coast USA) here to download and report the speed it downloads, location they are at, and the internet provider and package they have? If I cannot find the cause of this, I may have to move to a different virtual server provider which takes a lot of configuration for my server because of the nature of it

View 1 Replies View Related

Can't Connect Client / Server In Virtual PC

Sep 29, 2011

I'm having trouble connecting my client/server in my virtual PC. they just aren't seeing each other when it comes to connecting them to continue my server class.

server 2003 windows xp running on virtual PC I'm running windows 7 on my computer

View 4 Replies View Related

D-Link DIR-601 :: Router Ignores WAN Ping Setting

Apr 13, 2012

Using DIR-601 hardware version B1, Firmware 2.00NA, I am debugging problems I've had with this router, so it is set up on my network so I can access it from both the WAN and LAN side. If I ping the router from the WAN side, I get a very fast response. But when I disable ping from the administrative tools from the LAN side and reboot the router, I still get responses to my ping! I know the router is responding because if I disconnect the WAN cable from the router (connected to "INTERNET", the pings stop. So the router is ignoring user settings at Advanced->Advanced Network->WAN PING! Looks like a firmware bug.

View 3 Replies View Related

D-Link DIR-825 :: Make Virtual Server On Broadcast Ip For WOL?

Apr 25, 2012

I have an DLINK-dir 815 router.. I have tried for 10 hours to get broadcast IP to work, no luck.. All html/javascript modifications = no luck..The WOL works on LAN, but not over internet, so I figure it's the broadcast IP that needs to be virtual servered?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved