D-link Dir-655 :: Dir-665 Print To Network Printer By Wire But Not Wifi
Dec 31, 2011
I don't see a forum for the DIR-665 so I am posting this here.I have setup my network using the DIR-665. I can print to my network printer (not plugged into router usb it is a Network printer) from WIN XP and Mac Snow Leopard and Lion via a network cable.
When I connect to the router via WIFI it shows the printer is ready. Then I click print and it starts trying to find the printer but then fails saying the printer is not on the network.
View 14 Replies
ADVERTISEMENT
May 16, 2011
my printer connect wit desktop,pc is connect to router for net.. is it possible to take print out through laptop without conect any wire connection to printer???
View 1 Replies
View Related
Feb 22, 2012
My wife has a work laptop that she uses to connect to the internet and she can only do this through her work VPN.
I have a windows 7 desktop and can connect fine to a wireless HP 6500A Plus wireless printer on the same home network that my computer is connected to. So my computer prints wirelessly just fine.
She needs to print onto this same printer. We just spent 2 hours on the phone with a tech support guy from her work and we can't get it.
I'm computer savvy but not familiar with VPN's at all. How do we get her laptop, connected through VPN, to connect to the printer on my home wireless network.
she accesses the VPN through my home network.
View 7 Replies
View Related
Jun 16, 2011
3 Computers 2 using vista - 1 using XP. Printer is a HP 2727nf. Will work for a couple of jobs then receives an error code and will not print anymore for any computer. Only a hard reset of turning the printer off and clearing out the queue will print the job that was getting stuck. Wondering if anything can be done so error code won't show up and we can get this printer to run smooth again. PS we have another HP printer that works fine on the network.
View 1 Replies
View Related
May 7, 2013
Region : Others
Model : TD-W8968
Hardware Version : V1
Firmware Version :
ISP :
I am struggling to get a printer added through the print server. The printer is set up in the TP-Link USB Printer Controller and selected as the auto-connect printer. I can scan through the server, but can't add the printer in control panel or see it as a option when printing. The printer is a Samsung SCX-340F.
View 2 Replies
View Related
Feb 7, 2012
I can't print in my network printer using my Laptop (WIFI). I have check the default gateway of the desktop PC on which connected the printer and its different from my Laptop. Also I cant "SEE" this desktop PC on the LAN.
View 1 Replies
View Related
Jan 3, 2012
I can print from hp printer photosmart c6280 but cannot scan its on network
View 1 Replies
View Related
Dec 18, 2012
I have a small network of computers and printers in my tax office and consist of three computers running in window xp professional, one computer is designated as the server workstation and the c drive is the share drive and the other two work stations are mapped to the share drive c on the server workstation . so i am using peer to peer networking and these three computers are connected by a seven port router and two other printer are attached to the router also. i am having a problem printing from the computers to these printers, one is a hp laserjet 4200 and another is a hp laserjet all in one 3055.
In the past i just click and i would print, but a few day ago when i click print from either workstation it would que it to printing but it would have a message that it could not find my printer on the network. dont know why it all of a sudden stop working. do not know anything about setting up a printer on a network. do note the printers are connected to the router and not directly to the server workstation computer via usb. So the two workstation and the server workstation have the printer software on the C drive of each computer but for some reason it could not find the printers on the network. How to network a hp laserjet 4200 and Hp laserjet 3055 in a network that is connected by by one seven port router. why is the printers not in the network?
View 1 Replies
View Related
Dec 20, 2011
The printer, EPSON SX515W Series, is connected to the old computer, plugged in. The other laptops were not connected to the printer and would print as wireless. However now only the old computer prints directly to the printer, the other laptops fail to print it says that the laptop has the EPSON printer as it's default printer yet when ever I try to print, an exclamation mark in yellow triangle appears on the icon, in the control panel>printer section. Troubleshoot does not fix the problem either.The other problem is I can't remember how this was set up as my dad did it, and he will kill me if I don't fix it back. Also the old computer is different to the laptops. Old computer has Windows XP, and the laptops are vista.
View 3 Replies
View Related
Mar 1, 2011
I am currently having a problem connecting a hardlined (ethernet connected) PC to a wireless printer. I want to know first of all if this is even possible. If so, how can I make this work? I know just enough about networking to be dangerous, but not enough to see what I am doing wrong. My network structure is as follows:
a 2Wire wireless modem/router provided by my ISP. a win xp laptop connected wirelessly a vista laptop connected wirelessly a win xp pc connected via the 2Wire ethernet port a Lexmark 4530 printer with wireless adapter connected wirelessly wireless config is WPA-personal (TKIP)
The laptops are able to print to the printer, but that is only because I used the CD for the printer to setup the wireless printing. When I look at the network neighborhood on both laptops, the printer does not appear. This leads me to believe that the printer is not connected to the network, the laptops have just created a printer connection (the port designation leads me to believe this as it just shows Lexmark 3500_4500 and not an actual address). The hardlined PC can connect to the internet, but is not visible to either of the PC's. When I try to type in the IP address listed on the printers config page, it doesn't see it. I can ping it, but can't connect. I think my problem is in the connection of the wireless printer. I can see it in the connection screen of the 2Wire status page, but I have a funny feeling it isn't configured properly. There appears to be no way to configure the printer outside of using their "wireless connection utility wizard" on the CD.
There is one other twist to this, I have a Dlink DGL4300 wireless gaming router that I use for my XBOX and to give me additional hardline ports for other things. I don't have it connected right now (my box is out of commission waiting on parts), but I did have it connected behind the 2Wire before without any problems. I would like for it to remain this way once I have the printing problem resolved. I am using DHCP right now with auto assigned IPs, but I can reconfigure the network to whatever will allow me to get this to work properly.
View 3 Replies
View Related
Mar 2, 2012
I recently upgraded my d-link router DI-524 for Netgear N600 WNDR3700v3 and every component (wired or wireless) is working except network printer. I have it wired directly to the router and all pcs on the home network can see it, however when i select to do a test print, nothing prints to the printer and i get error. I had this setup using the d-link router with both the printer and the XP PC wired directly to the router and using the XP PC as a network pc sharing the printer to other pcs (Vista / Windows 7) on the home network.The printer is a Toshiba e-studio 160 series.. I re-added the print drivers for XP and still not able to print. Is there anything else I can try?
View 9 Replies
View Related
Jul 20, 2011
New Win-7 machine set up. I used the printer set-up wizard to install a networked printer in the new machine with absolutely no problem. Proved it would print from that machine.Now, I get a call informing me that her old XP machine, which had been printing to the network printer with no problems, will no longer print.Documents go into the print queue, but they don't get printed.No error messages show up.I did some messing around via remote access, and finally removed the printer with the intention of reinstalling it.Scanning for network printers turned up several redundant instances of the same printer with different names. Some are identified as "invalid" some a "access denied". Bottom line. I can't get any of the selections to install.On the Win-7 machine I did find a window that indicated that the printer is designated as being shared, but I didn't explicitly set it for sharing when I installed it. Also, I somehow got to a window that told me that for printers that were to be shared with other versions of windows I could optionally install drivers to support such machines. Didn't have the driver disk handy and took the window down. Now I can't even find it again.I need sorting this all out.Part of the problem is that out there in "network land" there are redundant remnants of previous installations that are being remembered inappropriately.
View 11 Replies
View Related
Aug 19, 2012
I'm about ready to lose it here as I've tried to find an answer on the net and have spent way too much time with this to no avail. I have an HP L7590 printer I'm trying to hook up to my wife's computer so she can print from it. Her desktop computer and the printer are in the same room and I know I should probably just get a long usb cable and hook it up to her Vista machine when she needs to print but I've been trying to network it so she can just print easily. I have the Ethernet cable running from the printer to the Motorola SBG6580 modem. The modem is hard wired directly to her desktop and I just use my laptop wireless. I have Win7 on my laptop. I've configured all the network connections and we are sharing. Her desktop does see the printer both wirelessly and stand alone connected. I've tried to connect both ways but no joy. I've even been able to do a test print from her machine but that's all it will print for some reason. It looks as if it will run the print and it shows the printer icon in her taskbar but it won't print.
View 3 Replies
View Related
Feb 18, 2011
I spend hours trying to get my printer to scan and print . I constantly get error messages,different ones each time job doesn't print,0x0000007a,0x80070002. I do not understand messages. Printing jobs will stay in que until I delete them. I have tried everything.Sometimes printer will not activate. Once I get it to activate it will deactivate and then I have to go through the process again. I become frustrated and will try again the nexr day. What can I do? It is a wireless network connection.
View 2 Replies
View Related
Jun 30, 2011
I can't get the printer to print wirelessly. I need a 10 digit number.
View 2 Replies
View Related
May 4, 2011
We have using printer in network, it cause problems daily that we give print in remote i.e., in our system it responds too many connections being used or otherwise network path not found.The printer model is HP Laserjet 1020.
View 1 Replies
View Related
Feb 16, 2011
The JetDirect Box isnt't attached to a PC but directly plugged into the network. Our customer can't find the installation CD or a manual of the device. Is there a command to send text files to the printer? We have installed the Unix-Printservice and know the IP of the printer. But as we don't have a queue name, we can't use the lpr.exe command.
View 10 Replies
View Related
Oct 19, 2011
Recently forgot my wireless password so i reset it and ever since then my printer says its offline and wont print.IVE TRIED UNINSTALLING IT AND REINSTALLING IT but whenever i got to control panel and add printer it never finds it.its definately connected to my wireless because it says connected on the printer.
View 14 Replies
View Related
Jul 5, 2011
Our cable company installed a new wireless router and gave it a different name so now our HP C4500 wireless printer won't print. I can't find any of the installation stuff (ie CD, etc) to reinstall it.
View 3 Replies
View Related
Nov 18, 2011
i have access to a network printer and everything was working fine previously until last Monday. Now when issue a print command to the printer, the printout delays until i restart the machine before it comes out. If i issue another print command, i would have to go through the same process again. This is actually slowing my work rate and its really an inconvenience.whenever the issue happens, i ping the printers IP address to see if it is actually working. I also check in a browser to see if the printer is ready and all are positive but the problem still remains. Is there a way around this problem.
View 2 Replies
View Related
Jul 15, 2012
Although the configuration is done, when a document is sent to the printer it gives error and does not print. We're using zyxel p2812.
View 1 Replies
View Related
Jun 29, 2012
I need to print to a printer in with a static IP on a different subnet from a host on a different subnet using DHCP.
View 1 Replies
View Related
Feb 23, 2013
[code] I had a new wireless DSL router installed on the network. The router recognizes both the laptop and printer and I can print documents from the laptop fine. I cannot print an accessed webpage from any browser (Firefox, Chrome or IE).
View 1 Replies
View Related
Sep 19, 2011
My printer is on, but will not print. I just connected a new router. Is there another connection I have missed? It's wireless.
View 6 Replies
View Related
Feb 20, 2013
How to print in one printer using multiple computer?
View 1 Replies
View Related
Apr 17, 2011
I'm looking for a way to print to my wireless home printer from anywhere.What hardware/software would I need? My printer is is essentially a home-network printer. I would like to access it from anywhere so when I am at work/school and need to print to it, I can.
View 6 Replies
View Related
Apr 4, 2012
There would appear to be a general problem with printing from a wireless laptop, judging by the number I've come across in the search for a solution to my particular problem.My Set-up is:BT Home-Hub (up to 8 MBs Broadband DSL connection with outputs of two ethernet ports and Wifi, telephone and USB
- port 1 connected to Vista PC
- port 2 connected to 8 port Netgear switch.
Netgear switch.
- port 1 input from BT Home Hub
- port 2 connected to TV
- port 3 connected to NAS
- port 4 connected to Samsung CLP 620 ND colour laser
- port 5 connected to this desktop PC (Win 7/64bit)
- ports 5 to 8 as yet unused.
Other PCs
- desktop running XP SP3 connects through WiFi
- old Toshiba laptop running XP SP 3 connects through WiFi
- new HP laptop running Win 7 SP 1 connects through WiFi
- Acer laptop running Win 7 SP1 connects through WiFi.(WiFi computers not necessarily connected all at the same time)
The issue.This desktop can print via the network..All XP pcs/laptops see the printer on the network and can print..The Win 7 laptops see the printer on the network, but when asked to print a test page, the document gets stuck in queue until it gives the Error - printing message. If the printer is sleeping, when the test page is sent, the Samsung print dialog panel on the laptop remains showing "Printer is sleeping..." as if no commands are being sent to the printer (and therefore why nothing prints). Cancelling the document returns the printer to normal - ie the exclam mark in the yellow triangle disappears and is replaced by a tick. When the laptop is shutdown, and then restarted maybe a day later, if the printer is on, it jumps into life and prints the test page from the laptop.I should add that the laptop is also part of the HOMEGROUP and can see the printer via this PC when this PC is on - and it can print via this PC in the HOMEGROUP. Both the problem laptops have the up to date Samsung drivers although it took an age to install - it seems to get stuck on the "Detecting TCP/IP Port" page and then goes to a page headed Additional port info required. On selecting Samsung Printer, it moves on to Detecting Driver Model, gets stuck there until it moves on to the old Add Printer dialog with Manufacturers in the left pane and printers in the right.
View 1 Replies
View Related
Jul 18, 2011
I want to print via Windows to a static-ip hp printer over the internet. I have static-ip addressed printers and plotters that I need to print to via my laptops from various locations when i'm not in the office. I have three locations and each location has static-ip's assigned to the local printers and i need to be able to print to them.Most laptops are either Windows XP PRO or Windows 7 Home Premium. I have heard something about using port 9100 to print to them, but I don't know how that works.
View 3 Replies
View Related
Sep 26, 2012
Have a Canon MG6120 wireless multifunction printer. I rarely print anything from my laptop, but wanted to do that today. What I get is an error message that the printer is offline -- which it isn't; it's on. I tried going thru the setup on the printer, re-entering the SSID, and it said it was connected. Still same error that it's offline.
About a month ago, I did change the name of my router, but it never cause a problem with printing from my desktop, which I can still do. It's just the laptop that gets the "offline" error.What do I need to do to make the laptop recognize that the printer is on?
View 1 Replies
View Related
Dec 3, 2012
my wireless printer will only print if I use the usb cable. It does not recognize the ssid# when signing into network.
View 1 Replies
View Related
Jan 16, 2012
How can I get my laptop to print into my home printer.Laptop 1 is now located somewhere (not at home) and connected to the internet wirelessly through a building's free wifi.I have Laptop 2 at home. I'm using Laptop 2 to remote control Laptop 1 using Team Viewer 7. I tried to print into the home printer from Laptop 1, but an error message pop up saying Printer is offline.If Laptop 1 is at home it can print to the home printer, no problem. So, how can I get Laptop 1 to print remotely from its current location to the home printer using Laptop 2 as my way of remote controlling Laptop 1? The printer device is already installed in Laptop 1.
View 4 Replies
View Related
Mar 16, 2012
I have a work PC Behind a domain which can connect to my home network no problems. I have a Homegroup set up at home that has a printer connected and shared to one of my PC's. All PC's behind the HomeGroup (or sharing the same homegroup name) can print to the printer no issue.
How can I set it up to where the Domain PC can print to the HomeGroup Printer?
View 14 Replies
View Related
Apr 25, 2012
i havent been able to print anything wirless or even with the usb cord in about a wk. i can try to print out anything it will say printing or nothing and nothing happens. just when i search to see whats going on, its says that certain amount of documents are waiting/pending. ive canceled them several times. i also know about the printer spooler i fixed that and i thought that was it, cuz i was able to print a color page for my kids right after, but after that i wasent unless i did the spooler thing again. and i try to print something from any sight and pop up thing comes out ive just moved it today to allow only for secure sights only. also i i went into printer setup and software did what it asked and nothing still. im on this page now told me to check ip address printed out for wirless network and it shows but and i viewed the summary for wired and there nothing shows. oh it wont print anything i need to print but it does print automatically epicurious receipe everyday. i have a windows 7 hp computer and and hp officejet pro 8600 all in one printer. i have set up to wireless.
View 1 Replies
View Related
