EPSON SX515W Series / Network Printer Does Not Print
Dec 20, 2011
The printer, EPSON SX515W Series, is connected to the old computer, plugged in. The other laptops were not connected to the printer and would print as wireless. However now only the old computer prints directly to the printer, the other laptops fail to print it says that the laptop has the EPSON printer as it's default printer yet when ever I try to print, an exclamation mark in yellow triangle appears on the icon, in the control panel>printer section. Troubleshoot does not fix the problem either.The other problem is I can't remember how this was set up as my dad did it, and he will kill me if I don't fix it back. Also the old computer is different to the laptops. Old computer has Windows XP, and the laptops are vista.
View 3 Replies
ADVERTISEMENT
Jan 2, 2013
I recently purchased an Epson XP-205 Wi-Fi printer, and I set it up on my network and installed the drivers to my laptop, initially I could print over the network, but since a restart I can't. I have tried an uninstall and reinstall of the printer, but to no avail and if it matters, I'm running W7 64-bit.
I've ensured the printing programs are part of my firewall exclusion rules, and I can access the printers set up page via 192.168.1.3, also as expected, the printer is "pingable". On top of this my Android tablet is able to send things to the printer, so I'm sure it is an issue with my laptop.
View 1 Replies
View Related
Mar 22, 2011
I have one of the above units which has worked fine since i first set it up over a year ago.Yesterday I tried to add an Epson sx425 WI-FI printer, I followed the instrucions and it connected ok however it started to drop the link intermitently and kept failing to print (which was also crap from my machine and total jibberish from any other!) then it lost it all together and all the other wireless devices lost their connection .The router reported it was ok with good signal strength but nothing connected so I switched it off for half an hour and rebooted but it was still the same so I tried to change the pass word but still nothing will connect. I have tried to reset the router also but this had no effect. the units plugged in via wire are working ok it is just something to do with the wirless signal.
View 26 Replies
View Related
Mar 4, 2013
I'm trying to use an EPSON WF2530 printer over wifi from my laptop Everythings fine until the printer gets turned off and on and the router assigns a new (different) IP address via DHCP.
I can run:
sudo nmap -PR -sP 192.168.1.1/24
which returns a list of MAC addresses and IP addresses on the LAN and then manually set the printer properties to the new IP address or I can log into the WiFi router and inspect the DHCP table then do the same thing What I'd really like to be able to do is have Ubuntu handle this automatically, e.g. it queries the MAC addresses on the LAN, finds the printer, extracts the current IP address and sets the printer properties appropriately? have to check the printers IP address every time I want to use it.I don't want to go down the route of having a static IP table
router is Cisco Linksys Dual-Band Wireless-N ADSL2+ Modem Router with Gigabit WAG320N
View 1 Replies
View Related
Feb 22, 2012
My wife has a work laptop that she uses to connect to the internet and she can only do this through her work VPN.
I have a windows 7 desktop and can connect fine to a wireless HP 6500A Plus wireless printer on the same home network that my computer is connected to. So my computer prints wirelessly just fine.
She needs to print onto this same printer. We just spent 2 hours on the phone with a tech support guy from her work and we can't get it.
I'm computer savvy but not familiar with VPN's at all. How do we get her laptop, connected through VPN, to connect to the printer on my home wireless network.
she accesses the VPN through my home network.
View 7 Replies
View Related
Jun 16, 2011
3 Computers 2 using vista - 1 using XP. Printer is a HP 2727nf. Will work for a couple of jobs then receives an error code and will not print anymore for any computer. Only a hard reset of turning the printer off and clearing out the queue will print the job that was getting stuck. Wondering if anything can be done so error code won't show up and we can get this printer to run smooth again. PS we have another HP printer that works fine on the network.
View 1 Replies
View Related
Feb 7, 2012
I can't print in my network printer using my Laptop (WIFI). I have check the default gateway of the desktop PC on which connected the printer and its different from my Laptop. Also I cant "SEE" this desktop PC on the LAN.
View 1 Replies
View Related
Jan 3, 2012
I can print from hp printer photosmart c6280 but cannot scan its on network
View 1 Replies
View Related
Dec 18, 2012
I have a small network of computers and printers in my tax office and consist of three computers running in window xp professional, one computer is designated as the server workstation and the c drive is the share drive and the other two work stations are mapped to the share drive c on the server workstation . so i am using peer to peer networking and these three computers are connected by a seven port router and two other printer are attached to the router also. i am having a problem printing from the computers to these printers, one is a hp laserjet 4200 and another is a hp laserjet all in one 3055.
In the past i just click and i would print, but a few day ago when i click print from either workstation it would que it to printing but it would have a message that it could not find my printer on the network. dont know why it all of a sudden stop working. do not know anything about setting up a printer on a network. do note the printers are connected to the router and not directly to the server workstation computer via usb. So the two workstation and the server workstation have the printer software on the C drive of each computer but for some reason it could not find the printers on the network. How to network a hp laserjet 4200 and Hp laserjet 3055 in a network that is connected by by one seven port router. why is the printers not in the network?
View 1 Replies
View Related
Dec 31, 2011
I don't see a forum for the DIR-665 so I am posting this here.I have setup my network using the DIR-665. I can print to my network printer (not plugged into router usb it is a Network printer) from WIN XP and Mac Snow Leopard and Lion via a network cable.
When I connect to the router via WIFI it shows the printer is ready. Then I click print and it starts trying to find the printer but then fails saying the printer is not on the network.
View 14 Replies
View Related
Mar 1, 2011
I am currently having a problem connecting a hardlined (ethernet connected) PC to a wireless printer. I want to know first of all if this is even possible. If so, how can I make this work? I know just enough about networking to be dangerous, but not enough to see what I am doing wrong. My network structure is as follows:
a 2Wire wireless modem/router provided by my ISP. a win xp laptop connected wirelessly a vista laptop connected wirelessly a win xp pc connected via the 2Wire ethernet port a Lexmark 4530 printer with wireless adapter connected wirelessly wireless config is WPA-personal (TKIP)
The laptops are able to print to the printer, but that is only because I used the CD for the printer to setup the wireless printing. When I look at the network neighborhood on both laptops, the printer does not appear. This leads me to believe that the printer is not connected to the network, the laptops have just created a printer connection (the port designation leads me to believe this as it just shows Lexmark 3500_4500 and not an actual address). The hardlined PC can connect to the internet, but is not visible to either of the PC's. When I try to type in the IP address listed on the printers config page, it doesn't see it. I can ping it, but can't connect. I think my problem is in the connection of the wireless printer. I can see it in the connection screen of the 2Wire status page, but I have a funny feeling it isn't configured properly. There appears to be no way to configure the printer outside of using their "wireless connection utility wizard" on the CD.
There is one other twist to this, I have a Dlink DGL4300 wireless gaming router that I use for my XBOX and to give me additional hardline ports for other things. I don't have it connected right now (my box is out of commission waiting on parts), but I did have it connected behind the 2Wire before without any problems. I would like for it to remain this way once I have the printing problem resolved. I am using DHCP right now with auto assigned IPs, but I can reconfigure the network to whatever will allow me to get this to work properly.
View 3 Replies
View Related
Mar 2, 2012
I recently upgraded my d-link router DI-524 for Netgear N600 WNDR3700v3 and every component (wired or wireless) is working except network printer. I have it wired directly to the router and all pcs on the home network can see it, however when i select to do a test print, nothing prints to the printer and i get error. I had this setup using the d-link router with both the printer and the XP PC wired directly to the router and using the XP PC as a network pc sharing the printer to other pcs (Vista / Windows 7) on the home network.The printer is a Toshiba e-studio 160 series.. I re-added the print drivers for XP and still not able to print. Is there anything else I can try?
View 9 Replies
View Related
May 21, 2012
I HAVE AN EPSON SX435W WITHOUT THE DISC. EVERY TIME I DOWNLOAD SOFTWARE. MY PRINTER SAYS IT CANNOT FIND THE PC. WHY?
View 1 Replies
View Related
Feb 27, 2012
I have a multifunctional printer epson cx8300 and have it connected to a print server TP-LINK TL-PS310U in a hope that every PCs on the network can share the printer to do printing and scanning. When I did a test to check if I can send a job to the printer, I could actually print it through the print server. However, the problem now is I can not scan a document. When I went to open windows Fax and Scanner window, unable to see any scanner there. So my question is whether this is the limitation of the epson printer itself or the print server or the scanners do not work on the network.
View 1 Replies
View Related
Mar 1, 2011
Recently i bought a new printer: Epson SX620FW, I've tried many things, but I can't connect it wireless to my network. Ive downloaded and installed the latest drivers and software from the internet. My PC is connected with a cable to my wireless router. When I connect the printer with a cable to my router everything works perfectly. But I want to connect my printer wireless. On the printer I disconnect the cable. I followed the wireless wizard setup on the printer and I connect to my wireless router. This is confirmed by an ip adress on the printer. Also in the menu of my router I find the ip adres of my printer in the DHCP clients list. So far so good. But from my PC I can not find the printer in my network. I also cant ping my printers ipadres. When I connect the UTP cable to my printer again, I can ping the ip of my printer.
View 2 Replies
View Related
Apr 7, 2012
I have an Epson Stylus D88 printer connected by USB to my Windows XP desktop that is connected to my router by an ethernet cable.
I would like to print through that printer from my Win7 laptop wirelessly, but when I follow the "add printer" steps I get told; "Windows can't find a driver for EPSON Stylus D88 Series on the network. To locate one manually, click OK. Otherwise, click Cancel and consult your network administrator or the printer manufacturer's website."
View 4 Replies
View Related
Oct 21, 2012
I am trying to get my printer to be able to use it from my phone and I need the SSID and then the password and Idk them.
View 2 Replies
View Related
Jan 25, 2011
I have 2 Samsung NC10's here at home that I would like to be able to print using my new Epson PX720WD wireless printer.The printer is fine when sending doc's or images from my main PC, but I suspect I need to load the same software via the CD onto these laptops? Problem with that is they don't have CD drives. Am I thinking along the right lines here? If so, is it possible to drag the info onto a memory stick, insert into laptop and off I go?
View 3 Replies
View Related
Aug 15, 2011
I have a printer (epson cx6600) I wanted to connect to our router here so everyone can print to it. It only has a usb connector (which you would typically connect to your pc)... I did notice they have usb to lan cables out there and was going to buy one and connect it to the router that way.
View 1 Replies
View Related
Apr 9, 2012
just bought a gateway dx4860 with wifi and a epson printer stylus nx230 wifi also. im having a problem to connect it wireless.
View 3 Replies
View Related
Oct 22, 2012
I have an HP 7310 Series SAll-in-One printer which is currently hooked up to a windows XP based computer via USB. I would like to connect the printer to my network instead, and would like to know which steps to take. Should I uninstall the software from the computer and start from fresh, or is there another way. I am not very savvy when it comes to networking, I want to connect the printer to my network, so that I can print from my iMac (which is connected to the network wirelessly).
View 2 Replies
View Related
Jul 20, 2011
New Win-7 machine set up. I used the printer set-up wizard to install a networked printer in the new machine with absolutely no problem. Proved it would print from that machine.Now, I get a call informing me that her old XP machine, which had been printing to the network printer with no problems, will no longer print.Documents go into the print queue, but they don't get printed.No error messages show up.I did some messing around via remote access, and finally removed the printer with the intention of reinstalling it.Scanning for network printers turned up several redundant instances of the same printer with different names. Some are identified as "invalid" some a "access denied". Bottom line. I can't get any of the selections to install.On the Win-7 machine I did find a window that indicated that the printer is designated as being shared, but I didn't explicitly set it for sharing when I installed it. Also, I somehow got to a window that told me that for printers that were to be shared with other versions of windows I could optionally install drivers to support such machines. Didn't have the driver disk handy and took the window down. Now I can't even find it again.I need sorting this all out.Part of the problem is that out there in "network land" there are redundant remnants of previous installations that are being remembered inappropriately.
View 11 Replies
View Related
Aug 19, 2012
I'm about ready to lose it here as I've tried to find an answer on the net and have spent way too much time with this to no avail. I have an HP L7590 printer I'm trying to hook up to my wife's computer so she can print from it. Her desktop computer and the printer are in the same room and I know I should probably just get a long usb cable and hook it up to her Vista machine when she needs to print but I've been trying to network it so she can just print easily. I have the Ethernet cable running from the printer to the Motorola SBG6580 modem. The modem is hard wired directly to her desktop and I just use my laptop wireless. I have Win7 on my laptop. I've configured all the network connections and we are sharing. Her desktop does see the printer both wirelessly and stand alone connected. I've tried to connect both ways but no joy. I've even been able to do a test print from her machine but that's all it will print for some reason. It looks as if it will run the print and it shows the printer icon in her taskbar but it won't print.
View 3 Replies
View Related
Feb 18, 2011
I spend hours trying to get my printer to scan and print . I constantly get error messages,different ones each time job doesn't print,0x0000007a,0x80070002. I do not understand messages. Printing jobs will stay in que until I delete them. I have tried everything.Sometimes printer will not activate. Once I get it to activate it will deactivate and then I have to go through the process again. I become frustrated and will try again the nexr day. What can I do? It is a wireless network connection.
View 2 Replies
View Related
Jun 30, 2011
I can't get the printer to print wirelessly. I need a 10 digit number.
View 2 Replies
View Related
May 4, 2011
We have using printer in network, it cause problems daily that we give print in remote i.e., in our system it responds too many connections being used or otherwise network path not found.The printer model is HP Laserjet 1020.
View 1 Replies
View Related
Feb 16, 2011
The JetDirect Box isnt't attached to a PC but directly plugged into the network. Our customer can't find the installation CD or a manual of the device. Is there a command to send text files to the printer? We have installed the Unix-Printservice and know the IP of the printer. But as we don't have a queue name, we can't use the lpr.exe command.
View 10 Replies
View Related
Oct 19, 2011
Recently forgot my wireless password so i reset it and ever since then my printer says its offline and wont print.IVE TRIED UNINSTALLING IT AND REINSTALLING IT but whenever i got to control panel and add printer it never finds it.its definately connected to my wireless because it says connected on the printer.
View 14 Replies
View Related
Jul 5, 2011
Our cable company installed a new wireless router and gave it a different name so now our HP C4500 wireless printer won't print. I can't find any of the installation stuff (ie CD, etc) to reinstall it.
View 3 Replies
View Related
Nov 18, 2011
i have access to a network printer and everything was working fine previously until last Monday. Now when issue a print command to the printer, the printout delays until i restart the machine before it comes out. If i issue another print command, i would have to go through the same process again. This is actually slowing my work rate and its really an inconvenience.whenever the issue happens, i ping the printers IP address to see if it is actually working. I also check in a browser to see if the printer is ready and all are positive but the problem still remains. Is there a way around this problem.
View 2 Replies
View Related
Jul 15, 2012
Although the configuration is done, when a document is sent to the printer it gives error and does not print. We're using zyxel p2812.
View 1 Replies
View Related
Jun 29, 2012
I need to print to a printer in with a static IP on a different subnet from a host on a different subnet using DHCP.
View 1 Replies
View Related
Feb 23, 2013
[code] I had a new wireless DSL router installed on the network. The router recognizes both the laptop and printer and I can print documents from the laptop fine. I cannot print an accessed webpage from any browser (Firefox, Chrome or IE).
View 1 Replies
View Related
