Using Samsung Netbook To Access Epson PX720WD Wireless Printer?
Jan 25, 2011
I have 2 Samsung NC10's here at home that I would like to be able to print using my new Epson PX720WD wireless printer.The printer is fine when sending doc's or images from my main PC, but I suspect I need to load the same software via the CD onto these laptops? Problem with that is they don't have CD drives. Am I thinking along the right lines here? If so, is it possible to drag the info onto a memory stick, insert into laptop and off I go?
View 3 Replies
ADVERTISEMENT
Jan 2, 2013
I recently purchased an Epson XP-205 Wi-Fi printer, and I set it up on my network and installed the drivers to my laptop, initially I could print over the network, but since a restart I can't. I have tried an uninstall and reinstall of the printer, but to no avail and if it matters, I'm running W7 64-bit.
I've ensured the printing programs are part of my firewall exclusion rules, and I can access the printers set up page via 192.168.1.3, also as expected, the printer is "pingable". On top of this my Android tablet is able to send things to the printer, so I'm sure it is an issue with my laptop.
View 1 Replies
View Related
Oct 7, 2012
Have a Samsung tablet supported by Verizon wireless. I need to connect to my home HP printer, but do not have broadband in the home, Can I connect the printer to a router and access via my tablet?
View 1 Replies
View Related
Mar 1, 2011
Recently i bought a new printer: Epson SX620FW, I've tried many things, but I can't connect it wireless to my network. Ive downloaded and installed the latest drivers and software from the internet. My PC is connected with a cable to my wireless router. When I connect the printer with a cable to my router everything works perfectly. But I want to connect my printer wireless. On the printer I disconnect the cable. I followed the wireless wizard setup on the printer and I connect to my wireless router. This is confirmed by an ip adress on the printer. Also in the menu of my router I find the ip adres of my printer in the DHCP clients list. So far so good. But from my PC I can not find the printer in my network. I also cant ping my printers ipadres. When I connect the UTP cable to my printer again, I can ping the ip of my printer.
View 2 Replies
View Related
Apr 9, 2012
just bought a gateway dx4860 with wifi and a epson printer stylus nx230 wifi also. im having a problem to connect it wireless.
View 3 Replies
View Related
Mar 22, 2011
I have one of the above units which has worked fine since i first set it up over a year ago.Yesterday I tried to add an Epson sx425 WI-FI printer, I followed the instrucions and it connected ok however it started to drop the link intermitently and kept failing to print (which was also crap from my machine and total jibberish from any other!) then it lost it all together and all the other wireless devices lost their connection .The router reported it was ok with good signal strength but nothing connected so I switched it off for half an hour and rebooted but it was still the same so I tried to change the pass word but still nothing will connect. I have tried to reset the router also but this had no effect. the units plugged in via wire are working ok it is just something to do with the wirless signal.
View 26 Replies
View Related
Dec 20, 2012
after installing Windows 7 Professional on my netbook, there has been a problem. I think it may be a problem with the wireless card or something..?
But anyway, before I had Professional, I had Starter, and that worked perfectly with the wireless internet. Now, however, I can only connect through ethernet. I know it is definitely a problem with my netbook, as before, the netbook could recognize all the routers, etc., on the street, and now it can't even recognize the router right next to me. Also, my phone is able to connect to my router perfectly fine...
I am running a Samsung N130 Netbook with Windows 7 Professional (x86), I bought the netbook at around November 2010 .
View 7 Replies
View Related
May 21, 2012
I HAVE AN EPSON SX435W WITHOUT THE DISC. EVERY TIME I DOWNLOAD SOFTWARE. MY PRINTER SAYS IT CANNOT FIND THE PC. WHY?
View 1 Replies
View Related
Feb 27, 2012
I have a multifunctional printer epson cx8300 and have it connected to a print server TP-LINK TL-PS310U in a hope that every PCs on the network can share the printer to do printing and scanning. When I did a test to check if I can send a job to the printer, I could actually print it through the print server. However, the problem now is I can not scan a document. When I went to open windows Fax and Scanner window, unable to see any scanner there. So my question is whether this is the limitation of the epson printer itself or the print server or the scanners do not work on the network.
View 1 Replies
View Related
Apr 7, 2012
I have an Epson Stylus D88 printer connected by USB to my Windows XP desktop that is connected to my router by an ethernet cable.
I would like to print through that printer from my Win7 laptop wirelessly, but when I follow the "add printer" steps I get told; "Windows can't find a driver for EPSON Stylus D88 Series on the network. To locate one manually, click OK. Otherwise, click Cancel and consult your network administrator or the printer manufacturer's website."
View 4 Replies
View Related
Oct 21, 2012
I am trying to get my printer to be able to use it from my phone and I need the SSID and then the password and Idk them.
View 2 Replies
View Related
Dec 20, 2011
The printer, EPSON SX515W Series, is connected to the old computer, plugged in. The other laptops were not connected to the printer and would print as wireless. However now only the old computer prints directly to the printer, the other laptops fail to print it says that the laptop has the EPSON printer as it's default printer yet when ever I try to print, an exclamation mark in yellow triangle appears on the icon, in the control panel>printer section. Troubleshoot does not fix the problem either.The other problem is I can't remember how this was set up as my dad did it, and he will kill me if I don't fix it back. Also the old computer is different to the laptops. Old computer has Windows XP, and the laptops are vista.
View 3 Replies
View Related
Mar 4, 2013
I'm trying to use an EPSON WF2530 printer over wifi from my laptop Everythings fine until the printer gets turned off and on and the router assigns a new (different) IP address via DHCP.
I can run:
sudo nmap -PR -sP 192.168.1.1/24
which returns a list of MAC addresses and IP addresses on the LAN and then manually set the printer properties to the new IP address or I can log into the WiFi router and inspect the DHCP table then do the same thing What I'd really like to be able to do is have Ubuntu handle this automatically, e.g. it queries the MAC addresses on the LAN, finds the printer, extracts the current IP address and sets the printer properties appropriately? have to check the printers IP address every time I want to use it.I don't want to go down the route of having a static IP table
router is Cisco Linksys Dual-Band Wireless-N ADSL2+ Modem Router with Gigabit WAG320N
View 1 Replies
View Related
Aug 9, 2012
My friend just started his business. There are 5 people working here including both of us. He bought a Samsung 2165W. He wants all of us to use this printer. What do we have to do? None of the PC's are on a domain. The printer has no ethernet jack. Do we just have to buy a router? Can we print via the ip address of the printer. We are using Vista. We installed the CD. We tried to install via USB. They wanted some numbers. We tried via WPS but we couldn't since there is no router.
View 7 Replies
View Related
Aug 15, 2011
I have a printer (epson cx6600) I wanted to connect to our router here so everyone can print to it. It only has a usb connector (which you would typically connect to your pc)... I did notice they have usb to lan cables out there and was going to buy one and connect it to the router that way.
View 1 Replies
View Related
Jul 26, 2012
Just purchased an E900 wireless router and cannot figure out how to connect my Samsung wireless printer. The printer has a WPS button, but the router does not. The router wants me to input information into the Samsung printer, but the printer has no screen, and I cannot find a place to input the router info anywhere in the Samsung software. I am going crazy here...I'm not a techie, but I'm also not a complete technology idiot.
View 2 Replies
View Related
Feb 11, 2011
Trying to connect a Samsung clp-315w wirelessly to my E3000. I plug the Ethernet cable into both to configure the printer and I cannot access the printer via its IP address. I suspect the printer is reporting the wrong IP address or it the IP is not being assigned by the router or it is being blocked by the router. Routers firewall is off. I use the Samsung software and it does not see the printer either. It seems the router is not seeing the printer or allowing it access to the network. Spent much time with a good Samsung support person and tried everything and narrowed the problem down to the router connection. Is there a setting on the router which needs to be changed to allow me to see the printer to configure it for wireless access?
View 6 Replies
View Related
Jan 20, 2011
I have a desktop computer using win 7 that works well with an hp c6100 series printer using a USB cable. I cannot connect wirelessly to this same printer from my netbook. both computers are using the same workgroup. When I tell the netbook to print it does not display anything, just doesn't connect to printer.
View 1 Replies
View Related
Jan 2, 2013
I have just moved printer locations and am with a satellite and not broadband now.My printer shows Network Printer is not availble and offline. How do I fix this. I have restarted comptuer, looked on line but to no avial
View 3 Replies
View Related
May 10, 2011
My Acer AOD260 NAV70 Netbook states "Limited Access" when I connect to my home router.
View 1 Replies
View Related
Oct 19, 2012
I have: ASUS Netbook with Windows 7 Starter.
As of last night, I cannot connect to any of the wireless networks I use every day (my personal home network or my school's WPA2).
The signal strength is very good, but it says "Limited Access" next to the network name. Apparently "Limited" means "No" because I am not connected. Here's what happened:Lavasoft Ad-Aware was blocking a site that I needed to access. I haven't used Ad-Aware in months, and it did not even appear to be running. So uninstalled it with Add/Remove programs in the control panel. BUT, mid-way through the uninstallation, I got a blue screen and my computer restarted. When my computer booted back up, I could no longer connect to my home's wireless. I'm at school now and I cannot connect here either. Ad-aware is gone from the add/remove programs list, but there is still an Ad-Aware folder in Program Files. The folder still has a bunch of stuff in it, including adaware.exe. I dont see an uninstaller (but i havent really investigated that yet). so now i can't connect to any network. Here's What I've TriedRan troubleshooter. Useless. Turned off my netbook's wireless. turned it back on. Device manager says my Network Adapters are working fine. No yellow or red icons next to them. also tried resetting stuff with the command prompt. something about winsock and netsh. I don't know what I was doing though. just following instructions from other people on yahoo answers when i googled the problem.
View 2 Replies
View Related
Apr 29, 2011
This issue concerns our Acer Aspire1 Netbook. It just suddenly will not let us access our home wireless network. When I followed previous advice by unchecking the IEEE 802.1x box, I received the "40 bit or 104 bit" warning box and upon checking found that the 802.1x box had automatically been rechecked. Needless to say, we still can't access the wireless network.
View 1 Replies
View Related
Jun 22, 2012
I have a Windows XP Laptop and an Windows 7 Starter Netbook. I have recently changed internet provider, returned the previous (Netgear) router and configured a new (D Link) router. Prior to the change of internet provider, both laptops could connect wirelessly without issues.After installing the new router provided by new internet provider, my Windows XP laptop can connect to the internet wirelessly without problems, the signal is strong and the speeds decent. My Windows 7 Netbook can connect to the network and to the internet, however, the speed on it is so low that pages do not load at all. Whilst it remains connected (the connection does not drop), it does not display web pages. Occasionally it displays a page or two, and it seems the problem is fixed, but this lasts no longer than a few minutes, after which it starts displaying "white" pages again. When the connection to the router is wired, the problem disappears and I can access the internet and the pages load well, so the problems is strictly a Wi Fi connectivity issue.
The Windows 7 Starter Netbook that has this problem at home, connects to every single other network I have had the chance to test it on (at work, at internet cafes, at my parents, at my sisters) and it also used to work flawlessly with my home network before I changed internet provider. On all other networks, it works really well.The new (D Link) router seems to work, otherwise my Windows XP laptop would also be having problems... but it doesn't.So both the new (D Link) router and my Windows 7 Starter Netbook work well separately. They just don't work together!I have tried a number of things: restarting the Netbook, restarting the router, re-installing Windows 7 Starter completely, disabling the network adapter and re-enabling it, updating the network driver, unprotecting the network completely, disabling Windows Firewall, disabling antivirus,changing the channels on the router, placing quartz crystals next to both devices and chanting. Below, I am pasting IP Config files showing the details of the settings in both devices (the one that works and the one that doesn't). As far as settings on the router is concerned, I have checked that they are the basic default ones that technical support are recommending.
IP Config of Windows XP Laptop that WORKS WELL:
Windows IP Configuration
Host Name . . . . . . . . . . . . : myhomelaptop
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]....
View 3 Replies
View Related
Dec 30, 2012
i try to connect my laptop wirelessely to my Epson printer epson 720WD , i dont exactly every thing write as it says it temporarly need a usb cable to connect wirelessely to the printer done that after that it started checking mac adress every thing ,but at the end what i get is installation failed .it says chanell conflict has been detected , how can i sort my router channel and the printer channel
View 7 Replies
View Related
Feb 9, 2013
Get "router/acess point channel conflict error and when I try Epson scan icon it tells me it cannot communicate with scanner.When I reinstalled CD, it told me the installation failed as some files necessary fo set up were missing.
View 2 Replies
View Related
Sep 13, 2012
what do i need to do to be able to print from my macbook air to my epson r280. i have a wireless network set up. computer attached to the printer is a dell running windows xp home edition
View 2 Replies
View Related
Mar 18, 2013
So I was having problems staying connected to the wifi on my samsung galaxy mini. Many fixes for other models in the galaxy series, limited fixes for the 'mini' version. Long story short, I was told to edit the DHCP lease time in my router settings.There I bumped into another problem.No mather what I tried there was no way of accessing the page. Weird thing is I remember having logged in on it before.Usually you just have to give in the standard gateway which should be 192.168.0.1 in my case. I checked it using ipconfig in cmd and my presumption was confirmed.Then I tried resetting the router to set back any settings that might've accidently been changed, in the hope that it would also reset the standard gateway and no succes.Now my knowledge about networking is verry limited.
View 8 Replies
View Related
Dec 27, 2012
I have set my Linksys WRT120N as an Access Point by connecting it to my primary router via Ethernet. To the Linksys WRT120N I have connected via Ethernet a Samsung BD-E5500 player.Through the Linksys WRT120N Access Point, I am wirelessly able to browse Internet through my cellphone, however, E5500 keeps reporting that while it is connected to the network, it is can not connect to the Internet. The Network Settings is Wired and Auto for IP and DNS.
View 3 Replies
View Related
Feb 16, 2010
I can't get my Epson Workforce 615 (610 series) All in One Printer to connect to my WRT54G router. I was on the phone with Epson for over an hour and renetered my SSID and security code 4 times. They said it was something about the router not letting it connect. The printer sees the SSID and I put my laptop in the same location as the printer and it has very good signal strength. I even took the printer back and got another one. The router does not have MAC filtering enabled.
View 5 Replies
View Related
Dec 6, 2011
I can't connect my Epson Stylus SX130 printer/scanner via the USB port on the Linksys E4200. It all ends up with cisco referring me to this website. I re-installed the printer/scanner, but it didn't work. The Stylus SX130 works fine when I connect it directly to my computer.
View 6 Replies
View Related
Apr 22, 2013
We have finding the projector in the network. When we connected a Epson projector and a laptop in different access points in wireless, we can found the projector in the network. But when we connected them in same access points in wireless, we can't found the projector. We need to find the solution of it. We are using Epson PowerLite 1761W projector and the access point is WAP4410N with firmware version 2.0.6.1.
View 1 Replies
View Related
Nov 12, 2011
Win 7 computer wired into D-Link 615 router (address of 192.168.1.1).Set win 7 computer static address at 192.168.0.100. Then set Epson wireless at 192.168.0.103.DCHP IP address range 192.168.0.105 to 192.168.0.199.Computer finds printer and everything works fine for about a week. Then computer can no longer ping the printer.
View 2 Replies
View Related
Feb 24, 2012
I am using a Macintosh (Lion) on a wireless network. I want to print to a printer on land line ethernet. I have the printer's IP address. I attempted to add the printer on the Macintosh using first LPD protocol and then IPP protocol. Neither worked.I chose Autoselect to select the driver and it would revert to Generic PostScript Printer.When I selected Add, screen said "Setting up " with the IP address for a while and then said "Unable to verify the printer on your network"
View 4 Replies
View Related
