Linksys Wireless Router :: E900 - Connecting Samsung Printer?
Jul 26, 2012
Just purchased an E900 wireless router and cannot figure out how to connect my Samsung wireless printer. The printer has a WPS button, but the router does not. The router wants me to input information into the Samsung printer, but the printer has no screen, and I cannot find a place to input the router info anywhere in the Samsung software. I am going crazy here...I'm not a techie, but I'm also not a complete technology idiot.
View 2 Replies
ADVERTISEMENT
Feb 11, 2011
Trying to connect a Samsung clp-315w wirelessly to my E3000. I plug the Ethernet cable into both to configure the printer and I cannot access the printer via its IP address. I suspect the printer is reporting the wrong IP address or it the IP is not being assigned by the router or it is being blocked by the router. Routers firewall is off. I use the Samsung software and it does not see the printer either. It seems the router is not seeing the printer or allowing it access to the network. Spent much time with a good Samsung support person and tried everything and narrowed the problem down to the router connection. Is there a setting on the router which needs to be changed to allow me to see the printer to configure it for wireless access?
View 6 Replies
View Related
Sep 25, 2011
I get a great wired connection but when I try for wireless the Samsung says I have a great connection, except when I try to use the Apps from the Blu Ray it tells me, No Internect Conncetion. Samusung support tells me I need to "open the ports" on my E3000 and make the Blu Ray a priority...I don't know how to do that.
View 7 Replies
View Related
Jan 29, 2013
I have been trying to connect my smart tv to my wireless network for the last 3 weeks. It connects intermittently but the connection is always lost within a few minutes to a couple hours. I have turned off all of the firewalls, and all other devices connect fine. It is an ea4500 running on updated firmware and a Samsung 6900 smart tv. The connection works if I run an ehternet cable to it oith from the modem as well as from the router, but it does not work over the wireless connection.
View 7 Replies
View Related
Jun 21, 2011
I had been using my printer through my linksys router with no problem until I added a password to the linksys. Now I can't print. My computer says it can't "ping" the printer.
View 1 Replies
View Related
Apr 1, 2012
I managed to connect my USB printer (and tested ok) through the E3200 router using the Cisco Connect programme on Windows 7. I note that there was an option for a USB Printer connection in the set-up screen.
When I tried it on the Mac using Mac OSX 10.7.3 and Cisco Connect Ver 1.4, I noted that there was no option for a USB Printer connection.
View 3 Replies
View Related
Apr 11, 2011
I think I have worked out that you can`t currently connect a usb printer to the usb port on the e4200 in order to share it over the network.
However I have heard reports that this might facility might be enabled in the spring.
I have also heard something about `virtual usb` but I don`t know whether this has anything to do with it.
View 9 Replies
View Related
Mar 3, 2013
I was wondering if there was a way to connect a wired printer to my linksys E3000? or am I still stuck with using my spare desktop.
View 4 Replies
View Related
Nov 26, 2011
I have a BEFW11SF V4 firmware version 1.52.03. I just bought an HP DJ3051A and can't get it to connect. HP support says I need to change a setting to mixed mode but I don't see that I can. Does this router supports mixed mode and if so how do I change it?The other comment the HP rep made was the printer does not support Wireless N. I am fine with this since the router says Wireless B. It seems based on the HP rep's comment that as long as I am not using Wireless N, then I should be fine.
View 1 Replies
View Related
Oct 7, 2012
Have a Samsung tablet supported by Verizon wireless. I need to connect to my home HP printer, but do not have broadband in the home, Can I connect the printer to a router and access via my tablet?
View 1 Replies
View Related
Dec 3, 2012
I would like to configure my PC to be able to use wake on LAN/WAN mainly for power issues, so I don't have to have it on all the time to access anything I need. I bought a Linksys Cisco E 900 2 weeks ago. Now I am getting really frustrated since as far as I know I did configure everything needed for it but it does not seem to work nor through WAN or even in LAN.
What I did so far is:
1. In my BIOS I could not find a seperate wake on lan option under power management but I did find a "Power on by pci(e) device which I have enable.
2. I have a built in Realtek Ethernet card on my motherboard. In the setting I: Shutdown wake on lan - Disable Wake on magic packet - Enabled Wake on pattern match - Enabled Also the option to allow this device to wake up the computer using magic packet is also ticked.
3. I use Windows 7 and have installed and started Simple TCP/IP Services
4. I opened up UDP port 9 in Windows Firewall
5. I have set single port forwarding in the E900 to my reserved IP for both TCP and UDP port on port 9 and just in case port 7.
After all this it is not even working inside my LAN. Also I tried a port scanner and checking for open ports and UDP port 9 doesn't seem to be open. Why is that? Did I configure something wrong in the router?
View 7 Replies
View Related
Jul 18, 2012
I have a Comcast modem, DPC3008 and a Cicso / Linksys E900 wireless router. When I connect my computer to the modem directly, it works great. when I use the router, I cannot conect to the Internet. The router is configured to use DHCP but on the status page, I never get an IP address. I have tried to release / renew the IP address from the status page but no luck.
View 5 Replies
View Related
Nov 30, 2012
I have a Linksys E900 router that seems to drop connections all the time. When I look at the status page, all the IP4 information is gone.
View 1 Replies
View Related
Sep 16, 2012
I am currently using an E900 wireless router. The router is on the second story so I have to use a wireless router booster to enhance the signal strength. I have been using the booster for well over a month with no issues whatsoever; however, tonight I attempt to get onto World of Warcraft and I keep getting disconnected every 5 minutes. After I run the diagnostic it fixes the problem and says that the "default gateway not available". I tried restarting the router, restarting the booster, unplugging the wireless adapter, checked the firewall, and also restarted my computer.
View 2 Replies
View Related
Apr 1, 2013
Just purchased the E900 and set it up yesterday. I was able to connect to my laptop off of my main computer. When I went to setup my wifes computer I get a message from the easy connect that cant connect to the network. Her computer has a Lynskys supper boost wireless adapter on a usb port
View 2 Replies
View Related
Jul 22, 2012
I am trying to have one of my devices always get the same internal IP address. I have an IP camera that I have setup with port forwarding. I think I found where to set it, but it isn't 100% clear that I have it set correctly. I have a E900 wireless router.
From my router's homepage I went to Setup - Basic Setup --> DHCP Reservation button. Then I found my camera in the top box (Select Clients from DHCP tables) and checked the box next to it and pressed the "Add Clients" button. Now I see my IP camera (along with the IP address I want it assigned to and it's MAC access in the section labeled "Clients Already Reserved".
So, did I go through to the procedure correctly to have my IP camera always get the same IP address?
View 2 Replies
View Related
Mar 4, 2013
I have an E900 connected to my LAN acting as a wireless access point (router functions disabled). Can I use the DDNS feature of the router in this configuration? I attempt and get ‘No Internet Connection’.
View 8 Replies
View Related
Oct 9, 2012
The wireless connection barely registers in the Speed Test within Cisco Connect - .56 download, 5.35 upload. A cable connection gives 2.4 download and 5.5 upload. The E900 is not far from the computer with no obstacles between.Is the wireless portion of the E900 set up improperly? Is there anything I can do to improve the wireless performance?
View 4 Replies
View Related
Aug 9, 2012
My friend just started his business. There are 5 people working here including both of us. He bought a Samsung 2165W. He wants all of us to use this printer. What do we have to do? None of the PC's are on a domain. The printer has no ethernet jack. Do we just have to buy a router? Can we print via the ip address of the printer. We are using Vista. We installed the CD. We tried to install via USB. They wanted some numbers. We tried via WPS but we couldn't since there is no router.
View 7 Replies
View Related
Oct 26, 2012
I bought the Linksys E900 Wireless-N300 router this evening in the hopes of hooking up my laptop to my apartment complex's wifi. I'd been previously using an ethernet cable to connect to an outlet which is also the cable connection for my television. I followed the instructions from the CD included, and I was able to successfully connect to the router, but it "cannot determine if I am connected to the internet." I added the device and MAC address to my wifi service account, and still no luck. I've tried connecting the old ethernet cable from the outlet I've been using to the router in one of the ethernet slots, with the provided ethernet cable being connected to my laptop and the 'internet' slot on the router. No internet connection. The recommendation is to "unplug the power cord from the DSL modem." I unplugged the power cord, waited, plugged it back in. Still nothing.
View 2 Replies
View Related
Mar 11, 2013
I just set up my new E900 router, but I can't get my Sony Xperia Ray to connect. I keep getting the message that there's an 'Authentication Problem'
View 2 Replies
View Related
Dec 28, 2012
My connect on demand is not working.Every time i have to go to router web page and click on connect.i tried to talk to the live chat on the website but the answer they gave me is that in e900 the connect on demand doesn't connect to the Internet automatically and we have to go to the router status page and then click on "connect".
View 9 Replies
View Related
Feb 9, 2013
Everytime I boot up my Winows 7 desktop the new E900 requires a security key to login.
Can't seem to get the settings right to automatically login like my laptop does. Routers can be humbling.
View 4 Replies
View Related
Dec 19, 2012
I just bought a Cisco Linksys E900 wireless router. Can someone explain to me why the router (192.168.1.1 on my case) has ports 1990/tcp and 5916/tcp open on the LAN?? I cannot find a way to close those ports.
[code]...
Every client on the LAN (wired and wireless) can connect to those ports on the router. I do not want that to happen. It is unncessary and it is just not secure. I only want the router to have port 443 open on the LAN for the web mgmt interface. I do not want any other unncessary port open.
View 4 Replies
View Related
Oct 28, 2012
I'm sitting next to Cisco e900 wireless router with my Android Charge smartphone. On the smartphone, the wifi connection shows only 19Mbs Link Speed. It often will drop to 5Mbps, or stop altogether.I have the Cisco E900 router configured to WPA2/WPA mixed mode.If I disable wireless security, my link speed stays at 54Mbps or faster.I would like to have wifi secured. How can I both do that, and keep fast speeds.WPA personal, WPA2 personal are also slow.
View 2 Replies
View Related
Jul 10, 2012
I just got the Cisco E900 router and installed it but I cannot get it to talk to my HP Office Por 8500A Plus.
View 3 Replies
View Related
Jun 20, 2012
New E900 router drops PPPoE session and gets new IP address randomly every 1-20 hours. Tried different E900, does the same thing. Disabled IPv6, no change. Upgraded FW from 1.0.00 to 1.0.01, no change. I have an SPA112 ATA behind the router and it has to re-register with the VoIP provider every time the IP address changes, so I'm afraid of my call getting dropped if this occurs while I'm on the phone. Using an old WRT54G or a different brand of router it will keep the same PPPoE session for weeks, so it is not the ISP.
View 2 Replies
View Related
Nov 24, 2012
After running the installation CD on my laptop, it cant detect any wireless network. It givs me an error saying that Your router set up was not successful.
View 2 Replies
View Related
Apr 18, 2012
I just recently purchased comcast internet today and self installation kit that came with the modem and all..... got it all set up no problems activated did speed test directly from cable modem to laptop computer wired and was getting 10mbps down and 3mbps up well went out and bought a linksys e900 wireless router.... connected it no problems... however my laptop wireless and phones connected to the router with speedtest is only getting 300kbps down average!!! but the upload is still 3mbps.
View 9 Replies
View Related
Jan 12, 2013
I just purchased a Linksys Cisco E900 router and hooked it up to my Internet cable. The Internet service that my ISP is giving me is PPPoE, fiber link (100 Mbps).
I did the set up. I connected my computer (via Ethernet cable) and my laptop (via wireless) to the router.
Now... there are other wireless networks around me. The WI-Fi channel my router fixed to is 1, apparently - saw it from the settings. But I can't find a menu anywhere in the router's gateway (192.168.1.1) from where I can change the wireless channel, wireless bandwidth etc.
View 2 Replies
View Related
Apr 20, 2013
Few months ago I have bought Linksys E900 N300 router and its working fine. I also have a USB printer (make: Canon LBP2900) and Laptop (make:Lenovo G580). I want to make this printer wireless and through my laptop and router I want to give prints to this printer. Is it possible to do like this?
View 2 Replies
View Related
Jan 25, 2011
I have 2 Samsung NC10's here at home that I would like to be able to print using my new Epson PX720WD wireless printer.The printer is fine when sending doc's or images from my main PC, but I suspect I need to load the same software via the CD onto these laptops? Problem with that is they don't have CD drives. Am I thinking along the right lines here? If so, is it possible to drag the info onto a memory stick, insert into laptop and off I go?
View 3 Replies
View Related
Mar 21, 2013
I have an E900 I replaced an old Airport Extreme with. The reason was for increased download speed. The Apple router I used saw my work network and I could access files and printers; no changes to my Mac were necessary. It worked out of the box. The new Linksys has Internet connectivity but will not see my work network at all. I have looked into the old settings and cannot figure out how to make the new router see my network. I called Linksys but no dice. What settings need to be changed to see the work network? It is connected to the same ethernet cable as the other router that worked fine.
View 1 Replies
View Related