Linksys Wireless Router :: E900 Keeps Dropping Connections?
Nov 30, 2012I have a Linksys E900 router that seems to drop connections all the time. When I look at the status page, all the IP4 information is gone.
View 1 Replies
ADVERTISEMENT
Linksys Wireless Router :: E900 Randomly Dropping PPPoE Sessions
Jun 20, 2012New E900 router drops PPPoE session and gets new IP address randomly every 1-20 hours. Tried different E900, does the same thing. Disabled IPv6, no change. Upgraded FW from 1.0.00 to 1.0.01, no change. I have an SPA112 ATA behind the router and it has to re-register with the VoIP provider every time the IP address changes, so I'm afraid of my call getting dropped if this occurs while I'm on the phone. Using an old WRT54G or a different brand of router it will keep the same PPPoE session for weeks, so it is not the ISP.
View 2 Replies View RelatedLinksys Wireless Router :: E4200 Dropping Connections
Mar 16, 2011my e4200 updated with latest 1.00.1 firmware is constantly dropping connections from the outside to existant lan servers running low traffic services when my machine is using torrent or internet gaming.( call of duty modern warfare )
View 9 Replies View RelatedLinksys Wireless Router :: ES6500 - Dropping All Connections
Dec 2, 2012I have a new EA 6500 and it works OK but ever few days it drops all connections. If I reset the router it will start working property but a few hours or a few days later it will drop all connections again. I have installed the latest firmware. Unless there is a fix I plan to return the router to linksys.
View 3 Replies View RelatedLinksys Wireless Router :: E2500 Constantly Dropping Connections
Sep 27, 2011In the last three weeks I replaced a Linksys WRT54G wireless router with a new E2500. The only reason this was done because the store salesman indicated I should get much better performance over my router that was probably 5 years only.
Since the install I have had nothing but issues. I could never get on PC runing XP to connect. It worked one day and the next morning I could never get it to connect again. I even removed the encryption and went to WEP with no luck. My laptop that I loaded the software on and initially did the connection I didn't have an initial problem. The problem I now have is the wireless connection is constantly dropping. In the course of an hour the connection probably drops 3 to 4 times. If you leave the PC for several hours, you may need to sign of your user and resign in to get the wireless connection to work. This is an experiment gone bad. My old router never dropped a connection and every PC in the house stayed connected forever. This new router is located the same distance as my original one was, but is nothing but a series of failed connection.
Linksys Wireless Router :: WRT400 Constantly Dropping Connections?
Mar 8, 2010I have gone through 2 of these routers now. The first time I was told I had a bad router so it was replaced. The problem is that it randomly disconnects all wireless devices. All I can do is wait for them to reconnect. I am very disappointed that I have not been able to find any solution to this problem. I have seen other posts for similar issuse but no resolution
View 2 Replies View RelatedLinksys Wireless Router :: E4200v2 Dropping Wired Connections?
Jan 23, 2012I just installed a brand new e4200 replacing my WRT54.Wireless works good with a noticable performance improvement over my old wireless.However, the wired conenctions are not solid at all. I am getting over 10% packet loss from the wired conenctions.I can not even connecct to the web ui reliably over wired connections.I upgraded to the latest firmware release with no real change at all.
View 2 Replies View RelatedLinksys Wireless Router :: E4200 Dropping Connections Several Times A Day
Apr 11, 2011my E4200 is dropping connections several times a day. I'd be working on my laptop, go to a webpage and bang, no connection. A minute or so later it would reconnect. It even appears to be doing this with a computer that is hardwired to one of the ports. So it doesn't seem limited to just wireless. Happens to both N and g channels as well.
View 9 Replies View RelatedLinksys Wireless Router :: E3000 Dropping Wifi Connections?
Aug 4, 2011Set channel manually - i've tried all the channels no luck
Different SSIDs for 5g and 2.4g
Beacon Interval 50
Fragmentation threshold 2306
RTS Threshold 2304
I'm running firmware 1.0.04 build 6 <script type="text/javascript"></script> Dec 6, 2010?I've had the router for 4 months now and this has been happening for the last 3.
Linksys Wireless Router :: EA3500 Dropping Connections Every Few Minutes?
Sep 16, 2012I have a brand new EA3500 (three months old) that has worked fine until recently. For some reason the wireless keeps dropping all connections every few minutes. I have checked the internet connection and that is not it as I can be hardwired to the router and the internet never drops. This happens to every device in the house (two Xbox, tablet, multiple PC's) at the same time, or randomly between. The devices are a mix of G and N so it is not associated with just one particular band. I have verified the wireless phone, microwave, or anything else that might interfere with the signal is running. One thing I have noticed is that when the wireless connection drops, the actual signal does not go away, I can still see it with a wifi analyzer. This is very frustrating as I just replaced a previous Linksys router with this one for the very same reason. Perhaps I should have bought some other manufacture.
View 4 Replies View RelatedLinksys Wireless Router :: WRT320N Started Dropping Connections After Update
Sep 3, 2011Upgraded to 1.0.04 from .03 and caused some problems. Worked great at first-upgrade was flawless-no problems there. THen it started dropping wireless connections. THen no wireless or wired connections. COuld not pull an IP address.Pulled power to router couple times and it worked great at first again then degraded like before.Held reset button for 5 secs to reset to factory defaults, now the setup display is missing all the html coding-no menu list. All in raw format.Am connected to port 1 via cat 5 to my laptop with no connections except the internet connection to the cable modem. Something has gone really wrong with my .04 software.Tried to find the .03 version, but the zip file is HUGE. Whats in it anyway?
View 1 Replies View RelatedLinksys Wired Router :: RVS-4000 Dropping Ip Connections?
Apr 19, 2012I have my RVS-4000 configured using static IP addresses in the LAN configuration. The users use DHCP to get their addresses (for the most part, a couple may have static IPs set on the computer). I have the maximum number of DHCP users set to 1 to restrict the ability of people to log in to the system. That one address is locked down.
Almost daily one or more of the users will lose their IP address and a hard reset of the router is required. The user this happens to seems random and it may be more than one but seldom all of them. The network includes Windows7 (Home & Pro), a FreeNAS, Macs (Leopard and Snow Leopard) and an AirPort Extreme used as a WAP (DHCP is disabled). The AirPort is plugged directly into the router and has a staic ip on the RVS-4000 but is set to DHCP. It seems to be the most common problem child.
Linksys Wireless Router :: E900 Wake On LAN / WAN?
Dec 3, 2012I would like to configure my PC to be able to use wake on LAN/WAN mainly for power issues, so I don't have to have it on all the time to access anything I need. I bought a Linksys Cisco E 900 2 weeks ago. Now I am getting really frustrated since as far as I know I did configure everything needed for it but it does not seem to work nor through WAN or even in LAN.
What I did so far is:
1. In my BIOS I could not find a seperate wake on lan option under power management but I did find a "Power on by pci(e) device which I have enable.
2. I have a built in Realtek Ethernet card on my motherboard. In the setting I: Shutdown wake on lan - Disable Wake on magic packet - Enabled Wake on pattern match - Enabled Also the option to allow this device to wake up the computer using magic packet is also ticked.
3. I use Windows 7 and have installed and started Simple TCP/IP Services
4. I opened up UDP port 9 in Windows Firewall
5. I have set single port forwarding in the E900 to my reserved IP for both TCP and UDP port on port 9 and just in case port 7.
After all this it is not even working inside my LAN. Also I tried a port scanner and checking for open ports and UDP port 9 doesn't seem to be open. Why is that? Did I configure something wrong in the router?
Linksys E900 Wireless Router :: DPC3008 Gets No IP Address
Jul 18, 2012I have a Comcast modem, DPC3008 and a Cicso / Linksys E900 wireless router. When I connect my computer to the modem directly, it works great. when I use the router, I cannot conect to the Internet. The router is configured to use DHCP but on the status page, I never get an IP address. I have tried to release / renew the IP address from the status page but no luck.
View 5 Replies View RelatedLinksys Wireless Router :: E900 - Default Gateway Not Available
Sep 16, 2012I am currently using an E900 wireless router. The router is on the second story so I have to use a wireless router booster to enhance the signal strength. I have been using the booster for well over a month with no issues whatsoever; however, tonight I attempt to get onto World of Warcraft and I keep getting disconnected every 5 minutes. After I run the diagnostic it fixes the problem and says that the "default gateway not available". I tried restarting the router, restarting the booster, unplugging the wireless adapter, checked the firewall, and also restarted my computer.
View 2 Replies View RelatedLinksys Wireless Router :: E900 Cannot Connect To One Computer
Apr 1, 2013Just purchased the E900 and set it up yesterday. I was able to connect to my laptop off of my main computer. When I went to setup my wifes computer I get a message from the easy connect that cant connect to the network. Her computer has a Lynskys supper boost wireless adapter on a usb port
View 2 Replies View RelatedLinksys Wireless Router :: E900 - Static IP For Device
Jul 22, 2012I am trying to have one of my devices always get the same internal IP address. I have an IP camera that I have setup with port forwarding. I think I found where to set it, but it isn't 100% clear that I have it set correctly. I have a E900 wireless router.
From my router's homepage I went to Setup - Basic Setup --> DHCP Reservation button. Then I found my camera in the top box (Select Clients from DHCP tables) and checked the box next to it and pressed the "Add Clients" button. Now I see my IP camera (along with the IP address I want it assigned to and it's MAC access in the section labeled "Clients Already Reserved".
So, did I go through to the procedure correctly to have my IP camera always get the same IP address?
Linksys Wireless Router :: Using DDNS Feature Of E900?
Mar 4, 2013I have an E900 connected to my LAN acting as a wireless access point (router functions disabled). Can I use the DDNS feature of the router in this configuration? I attempt and get ‘No Internet Connection’.
View 8 Replies View RelatedLinksys Wireless Router :: E900 Performance Is Very Poor
Oct 9, 2012The wireless connection barely registers in the Speed Test within Cisco Connect - .56 download, 5.35 upload. A cable connection gives 2.4 download and 5.5 upload. The E900 is not far from the computer with no obstacles between.Is the wireless portion of the E900 set up improperly? Is there anything I can do to improve the wireless performance?
View 4 Replies View RelatedLinksys Wireless Router :: E900 N300 - No Internet Connection
Oct 26, 2012I bought the Linksys E900 Wireless-N300 router this evening in the hopes of hooking up my laptop to my apartment complex's wifi. I'd been previously using an ethernet cable to connect to an outlet which is also the cable connection for my television. I followed the instructions from the CD included, and I was able to successfully connect to the router, but it "cannot determine if I am connected to the internet." I added the device and MAC address to my wifi service account, and still no luck. I've tried connecting the old ethernet cable from the outlet I've been using to the router in one of the ethernet slots, with the provided ethernet cable being connected to my laptop and the 'internet' slot on the router. No internet connection. The recommendation is to "unplug the power cord from the DSL modem." I unplugged the power cord, waited, plugged it back in. Still nothing.
View 2 Replies View RelatedLinksys Wireless Router :: Sony Xperia Ray Won't Connect To New E900?
Mar 11, 2013I just set up my new E900 router, but I can't get my Sony Xperia Ray to connect. I keep getting the message that there's an 'Authentication Problem'
View 2 Replies View RelatedLinksys Wireless Router :: E900 - Connecting Samsung Printer?
Jul 26, 2012Just purchased an E900 wireless router and cannot figure out how to connect my Samsung wireless printer. The printer has a WPS button, but the router does not. The router wants me to input information into the Samsung printer, but the printer has no screen, and I cannot find a place to input the router info anywhere in the Samsung software. I am going crazy here...I'm not a techie, but I'm also not a complete technology idiot.
View 2 Replies View RelatedLinksys Wireless Router :: E900 Connect On Demand Not Working?
Dec 28, 2012My connect on demand is not working.Every time i have to go to router web page and click on connect.i tried to talk to the live chat on the website but the answer they gave me is that in e900 the connect on demand doesn't connect to the Internet automatically and we have to go to the router status page and then click on "connect".
View 9 Replies View RelatedLinksys Wireless Router :: E900 - Need To Automate Security Key Login
Feb 9, 2013Everytime I boot up my Winows 7 desktop the new E900 requires a security key to login.
Can't seem to get the settings right to automatically login like my laptop does. Routers can be humbling.
Linksys Wireless Router :: Way To Close Cisco E900 Ports
Dec 19, 2012I just bought a Cisco Linksys E900 wireless router. Can someone explain to me why the router (192.168.1.1 on my case) has ports 1990/tcp and 5916/tcp open on the LAN?? I cannot find a way to close those ports.
[code]...
Every client on the LAN (wired and wireless) can connect to those ports on the router. I do not want that to happen. It is unncessary and it is just not secure. I only want the router to have port 443 open on the LAN for the web mgmt interface. I do not want any other unncessary port open.
Linksys Wireless Router :: E900 Wifi Slow If Security On
Oct 28, 2012I'm sitting next to Cisco e900 wireless router with my Android Charge smartphone. On the smartphone, the wifi connection shows only 19Mbs Link Speed. It often will drop to 5Mbps, or stop altogether.I have the Cisco E900 router configured to WPA2/WPA mixed mode.If I disable wireless security, my link speed stays at 54Mbps or faster.I would like to have wifi secured. How can I both do that, and keep fast speeds.WPA personal, WPA2 personal are also slow.
View 2 Replies View RelatedLinksys Wireless Router :: E900 Cannot Get To Talk To HP Office 8500A Plus
Jul 10, 2012I just got the Cisco E900 router and installed it but I cannot get it to talk to my HP Office Por 8500A Plus.
View 3 Replies View RelatedLinksys Wireless Router :: Laptop Can't Connect To E900 - Setup Unsuccessful
Nov 24, 2012After running the installation CD on my laptop, it cant detect any wireless network. It givs me an error saying that Your router set up was not successful.
View 2 Replies View RelatedLinksys Wireless Router :: E900 Comcast Xfinity Internet Speed
Apr 18, 2012I just recently purchased comcast internet today and self installation kit that came with the modem and all..... got it all set up no problems activated did speed test directly from cable modem to laptop computer wired and was getting 10mbps down and 3mbps up well went out and bought a linksys e900 wireless router.... connected it no problems... however my laptop wireless and phones connected to the router with speedtest is only getting 300kbps down average!!! but the upload is still 3mbps.
View 9 Replies View RelatedLinksys Wireless Router :: E900 - Menu To Change Channel And Bandwidth
Jan 12, 2013I just purchased a Linksys Cisco E900 router and hooked it up to my Internet cable. The Internet service that my ISP is giving me is PPPoE, fiber link (100 Mbps).
I did the set up. I connected my computer (via Ethernet cable) and my laptop (via wireless) to the router.
Now... there are other wireless networks around me. The WI-Fi channel my router fixed to is 1, apparently - saw it from the settings. But I can't find a menu anywhere in the router's gateway (192.168.1.1) from where I can change the wireless channel, wireless bandwidth etc.
Linksys Wireless Router :: E900 N300 Router Can Act As Print Server
Apr 20, 2013Few months ago I have bought Linksys E900 N300 router and its working fine. I also have a USB printer (make: Canon LBP2900) and Laptop (make:Lenovo G580). I want to make this printer wireless and through my laptop and router I want to give prints to this printer. Is it possible to do like this?
View 2 Replies View RelatedLinksys Wireless Router :: E900 Connects To Internet But Not Detects Work Network
Mar 21, 2013I have an E900 I replaced an old Airport Extreme with. The reason was for increased download speed. The Apple router I used saw my work network and I could access files and printers; no changes to my Mac were necessary. It worked out of the box. The new Linksys has Internet connectivity but will not see my work network at all. I have looked into the old settings and cannot figure out how to make the new router see my network. I called Linksys but no dice. What settings need to be changed to see the work network? It is connected to the same ethernet cable as the other router that worked fine.
View 1 Replies View RelatedLinksys Cable / Dsl :: Wag160n Wifi Dropping Connections?
Mar 28, 2012For a few weeks now, my router has been dropping WiFi connections, seemingly at random. When trying to watch BBC iPlayer is terrible, as it keeps dropping every 5 minutes.
Tonight my iPod Touch (iOS5) was connecting okay, while my son's iPod Touches (iOS3 and iOS4) would not. My MacBook Pro would not connect either.
The only to get things working again, is to turn the router off for a few minutes and turn it on again.
I have router wireless settings as follows:
Network Mode: mixed
Radio Band: Wide - 40MHz channel
Wide Channel: 9
Standard Channel: 7 - 2.442GHz
SSID: Disabled
Router Firmware Version:V2.00.20
My wired connection is running well:
Speed DownSpeed Up
15734.10 Kbps ( 15.4 Mbps )1012.05 Kbps ( 1 Mbps )