Linksys Wireless Router :: E900 Randomly Dropping PPPoE Sessions
Jun 20, 2012
New E900 router drops PPPoE session and gets new IP address randomly every 1-20 hours. Tried different E900, does the same thing. Disabled IPv6, no change. Upgraded FW from 1.0.00 to 1.0.01, no change. I have an SPA112 ATA behind the router and it has to re-register with the VoIP provider every time the IP address changes, so I'm afraid of my call getting dropped if this occurs while I'm on the phone. Using an old WRT54G or a different brand of router it will keep the same PPPoE session for weeks, so it is not the ISP.
View 2 Replies
ADVERTISEMENT
Nov 30, 2012
I have a Linksys E900 router that seems to drop connections all the time. When I look at the status page, all the IP4 information is gone.
View 1 Replies
View Related
Aug 17, 2012
I have a server that I am using as a CCTV system. On the E3200, I have port forwarding setup so that it will forward port 3500 in to port 80 on my server. So from the internet, I can point my browser to my home IP address on port 3500 and see the images capture on the server.What I am finding is that from inside the network, I can connect to the cctv server all day long. When I try to connect to it from the internet using the external IP address on port 3500, the Linksys E3200 is dropping my inbound connection and it seems like it is blacklisting my IP address for several minutes. I can have a continuous ping going. As soon as I try to access the cctv webpage, my session drops, the pings start failing, and it remains that way for a short time.I thought that the router might be resetting itself, so I started a continous ping from two totally separate computers to my router, and from one of those computers I try to access the cctv server through the port forwarding, and the computer I tried it from one drop and its pings would start failing, at the same time the other computer was still able to continously ping my router.
View 9 Replies
View Related
Jun 23, 2012
i am a total n00b when it comes to wireless routers etc,.. i bought this router [E3200] about six mths ago, it has been working just fine untill a couple days ago, wher i woud be on the internet and all of a sudden, the internet connection drops, i am using a cable modem [ARRIS TM722G] ,i did a reset on the e3200 and put restore the settings that did last over night
View 9 Replies
View Related
Jul 4, 2011
I have two notebooks, one smartphone, and one blu-ray player that connects to my wireless network. My gaming PC is hard wired into the same router that broadcasts my wireless network. About 5-6 times, my wireless network will drop and everyone connected to it wirelessly will lose their connection for about 1-2 minutes. While my gaming PCs internet connection is undisturbed, all of my wireless devices can no longer "see" the network SSID and therefore connect to it. The problem has been happening consistently for many months.
View 1 Replies
View Related
Dec 3, 2012
I would like to configure my PC to be able to use wake on LAN/WAN mainly for power issues, so I don't have to have it on all the time to access anything I need. I bought a Linksys Cisco E 900 2 weeks ago. Now I am getting really frustrated since as far as I know I did configure everything needed for it but it does not seem to work nor through WAN or even in LAN.
What I did so far is:
1. In my BIOS I could not find a seperate wake on lan option under power management but I did find a "Power on by pci(e) device which I have enable.
2. I have a built in Realtek Ethernet card on my motherboard. In the setting I: Shutdown wake on lan - Disable Wake on magic packet - Enabled Wake on pattern match - Enabled Also the option to allow this device to wake up the computer using magic packet is also ticked.
3. I use Windows 7 and have installed and started Simple TCP/IP Services
4. I opened up UDP port 9 in Windows Firewall
5. I have set single port forwarding in the E900 to my reserved IP for both TCP and UDP port on port 9 and just in case port 7.
After all this it is not even working inside my LAN. Also I tried a port scanner and checking for open ports and UDP port 9 doesn't seem to be open. Why is that? Did I configure something wrong in the router?
View 7 Replies
View Related
Jul 18, 2012
I have a Comcast modem, DPC3008 and a Cicso / Linksys E900 wireless router. When I connect my computer to the modem directly, it works great. when I use the router, I cannot conect to the Internet. The router is configured to use DHCP but on the status page, I never get an IP address. I have tried to release / renew the IP address from the status page but no luck.
View 5 Replies
View Related
Sep 16, 2012
I am currently using an E900 wireless router. The router is on the second story so I have to use a wireless router booster to enhance the signal strength. I have been using the booster for well over a month with no issues whatsoever; however, tonight I attempt to get onto World of Warcraft and I keep getting disconnected every 5 minutes. After I run the diagnostic it fixes the problem and says that the "default gateway not available". I tried restarting the router, restarting the booster, unplugging the wireless adapter, checked the firewall, and also restarted my computer.
View 2 Replies
View Related
Apr 1, 2013
Just purchased the E900 and set it up yesterday. I was able to connect to my laptop off of my main computer. When I went to setup my wifes computer I get a message from the easy connect that cant connect to the network. Her computer has a Lynskys supper boost wireless adapter on a usb port
View 2 Replies
View Related
Jul 22, 2012
I am trying to have one of my devices always get the same internal IP address. I have an IP camera that I have setup with port forwarding. I think I found where to set it, but it isn't 100% clear that I have it set correctly. I have a E900 wireless router.
From my router's homepage I went to Setup - Basic Setup --> DHCP Reservation button. Then I found my camera in the top box (Select Clients from DHCP tables) and checked the box next to it and pressed the "Add Clients" button. Now I see my IP camera (along with the IP address I want it assigned to and it's MAC access in the section labeled "Clients Already Reserved".
So, did I go through to the procedure correctly to have my IP camera always get the same IP address?
View 2 Replies
View Related
Mar 4, 2013
I have an E900 connected to my LAN acting as a wireless access point (router functions disabled). Can I use the DDNS feature of the router in this configuration? I attempt and get ‘No Internet Connection’.
View 8 Replies
View Related
Oct 9, 2012
The wireless connection barely registers in the Speed Test within Cisco Connect - .56 download, 5.35 upload. A cable connection gives 2.4 download and 5.5 upload. The E900 is not far from the computer with no obstacles between.Is the wireless portion of the E900 set up improperly? Is there anything I can do to improve the wireless performance?
View 4 Replies
View Related
Jun 15, 2012
My wife, daughter, mother and I recently moved into a place together. Since moving in together, our internet connection has been less than reliable. We use a motorola modem and a DLink DIR615 router. I have a desktop with a wireless card, and my mother has an all in one with a wireless card, so we both connect wirelessly to the internet. We also use iPhones and a PS3 for internet purposes. The DLink is my router from my family's old place before moving with my mother. The motorola modem is my mother's from her place. Prior to sharing a household, I never had a problem with the router dropping signal. She, however, did have a problem with it. She was using the motorola and a netgear router. So, with that out of the way, here's what happens. The internet works fine and the network shows as available, but then suddenly the internet just goes out in all areas of the house. The network no longer shows as available. It's fixed by unplugging the router for about 10 seconds and then plugging it back in. I've tried talking to DLink about it, thinking it was a problem with the router. They even sent me a replacement router because we couldn't figure out the problem, but even with the new one it's still happening. I can also add that while we were waiting for the replacement, we connected my mother's Netgear and it continued happening. When the new DLink came, I confirmed that the router has the latest firmware as well, just in case. I can add that since sharing a network, we've been getting an IP Address conflict message on both computers. We both have Windows 7. Can anybody shed some light on this? I have some knowledge of this kind of stuff but what's happening is way beyond my scope.
View 7 Replies
View Related
Jun 25, 2012
I bought a TP-Link WR1043ND router about 3 months ago and I had a problem since then.It keeps dropping my connection randomly. If I hook my PC directly to the modem, the connection's fine.With the stock firmware, if the connection drops, I can't even access my router through its IP. I get an indefinitely loading webpage with nothing to show. I can only solve this by unplugging and then plugging in the router.DD-WRT was better, I could access the router anytime a disconnect occurred, but it still occurred.
View 1 Replies
View Related
Oct 26, 2012
I bought the Linksys E900 Wireless-N300 router this evening in the hopes of hooking up my laptop to my apartment complex's wifi. I'd been previously using an ethernet cable to connect to an outlet which is also the cable connection for my television. I followed the instructions from the CD included, and I was able to successfully connect to the router, but it "cannot determine if I am connected to the internet." I added the device and MAC address to my wifi service account, and still no luck. I've tried connecting the old ethernet cable from the outlet I've been using to the router in one of the ethernet slots, with the provided ethernet cable being connected to my laptop and the 'internet' slot on the router. No internet connection. The recommendation is to "unplug the power cord from the DSL modem." I unplugged the power cord, waited, plugged it back in. Still nothing.
View 2 Replies
View Related
Mar 11, 2013
I just set up my new E900 router, but I can't get my Sony Xperia Ray to connect. I keep getting the message that there's an 'Authentication Problem'
View 2 Replies
View Related
Jul 26, 2012
Just purchased an E900 wireless router and cannot figure out how to connect my Samsung wireless printer. The printer has a WPS button, but the router does not. The router wants me to input information into the Samsung printer, but the printer has no screen, and I cannot find a place to input the router info anywhere in the Samsung software. I am going crazy here...I'm not a techie, but I'm also not a complete technology idiot.
View 2 Replies
View Related
Dec 28, 2012
My connect on demand is not working.Every time i have to go to router web page and click on connect.i tried to talk to the live chat on the website but the answer they gave me is that in e900 the connect on demand doesn't connect to the Internet automatically and we have to go to the router status page and then click on "connect".
View 9 Replies
View Related
Feb 9, 2013
Everytime I boot up my Winows 7 desktop the new E900 requires a security key to login.
Can't seem to get the settings right to automatically login like my laptop does. Routers can be humbling.
View 4 Replies
View Related
Dec 19, 2012
I just bought a Cisco Linksys E900 wireless router. Can someone explain to me why the router (192.168.1.1 on my case) has ports 1990/tcp and 5916/tcp open on the LAN?? I cannot find a way to close those ports.
[code]...
Every client on the LAN (wired and wireless) can connect to those ports on the router. I do not want that to happen. It is unncessary and it is just not secure. I only want the router to have port 443 open on the LAN for the web mgmt interface. I do not want any other unncessary port open.
View 4 Replies
View Related
Oct 28, 2012
I'm sitting next to Cisco e900 wireless router with my Android Charge smartphone. On the smartphone, the wifi connection shows only 19Mbs Link Speed. It often will drop to 5Mbps, or stop altogether.I have the Cisco E900 router configured to WPA2/WPA mixed mode.If I disable wireless security, my link speed stays at 54Mbps or faster.I would like to have wifi secured. How can I both do that, and keep fast speeds.WPA personal, WPA2 personal are also slow.
View 2 Replies
View Related
Jul 10, 2012
I just got the Cisco E900 router and installed it but I cannot get it to talk to my HP Office Por 8500A Plus.
View 3 Replies
View Related
May 30, 2012
I have my ethernet cable hooked up to a WNDR3400 router, and my internet connection will drop for an instant randomly (usually happens at least once every 5 minutes) it then instantly reconnects. The problem is that when i'm downloading stuff, the disconnection will cause the download to fail and i'll have to restart from the beginning (making larger files impossible to download). Also, I have an xbox in the same room connected to the router via wireless. It also has the same issues of dropping and reconnecting and that causes me to get kicked out of live.Interestingly enough, my laptop, connected to the internet via wireless does not experience this issue when used in (or outside of) the room.
View 4 Replies
View Related
Jan 26, 2012
I have recently installed four Cisco RV042 v3 VPN routers for a customer of ours to replace existing Nortel Contivity 1010 devices which were providing VPN tunnels from the customer's 3 branches to their headoffice. The original Nortel devices were working perfectly but the customer wanted some firewall rule changes and the Nortels were proving to be somewhat inflexible and incomprehensible in their configuration hence why they were replaced.
When installing the Cisco routers I configured the VPN settings to match the Nortel device settings so that I could swap out a branch at a time without taking the whole setup down for a day.The customer has a Unix based dumb-terminal application running on a server at headoffice that they access from their branches using terminal emulators on Windows PCs and thin client hardware devices that support vt100 terminal emulation.
Prior to installing the Cisco RV042's everything was working fine. Now they are using the RV042's they keep getting the sessions from their branches dropped. Both PC users and thin client users are losing sessions and it happens with active and idle sessions. I have checked the logs on the routers when users are disconnected and there is nothing logged at that time (other than my login)... I had thought maybe it was to do with tunnel renegotioations so I have set to phase 1 / phase 2 SA timeouts to 86400 & 28800 seconds respectively but this has had no effect. I had also seen somebody advised disabling 'SPI' in the firewall... I have tried this and it makes no difference.
View 9 Replies
View Related
Nov 24, 2012
After running the installation CD on my laptop, it cant detect any wireless network. It givs me an error saying that Your router set up was not successful.
View 2 Replies
View Related
Apr 18, 2012
I just recently purchased comcast internet today and self installation kit that came with the modem and all..... got it all set up no problems activated did speed test directly from cable modem to laptop computer wired and was getting 10mbps down and 3mbps up well went out and bought a linksys e900 wireless router.... connected it no problems... however my laptop wireless and phones connected to the router with speedtest is only getting 300kbps down average!!! but the upload is still 3mbps.
View 9 Replies
View Related
Jan 12, 2013
I just purchased a Linksys Cisco E900 router and hooked it up to my Internet cable. The Internet service that my ISP is giving me is PPPoE, fiber link (100 Mbps).
I did the set up. I connected my computer (via Ethernet cable) and my laptop (via wireless) to the router.
Now... there are other wireless networks around me. The WI-Fi channel my router fixed to is 1, apparently - saw it from the settings. But I can't find a menu anywhere in the router's gateway (192.168.1.1) from where I can change the wireless channel, wireless bandwidth etc.
View 2 Replies
View Related
Apr 20, 2013
Few months ago I have bought Linksys E900 N300 router and its working fine. I also have a USB printer (make: Canon LBP2900) and Laptop (make:Lenovo G580). I want to make this printer wireless and through my laptop and router I want to give prints to this printer. Is it possible to do like this?
View 2 Replies
View Related
Mar 23, 2012
* ADSL modem connected to internet
* WiFi router (Netgear WPN824v2) connected to ADSL modem
* CPU, iPhone and iPad connected to router, CPU wired connection.Everything has worked like a charm up until a couple of days ago. Now the link between the router WAN port and the modem randomly drops. Stays dropped for 1-3 secs and then connect again. When its really bad this happens with 5-10 secs intervall. This made it impossible to use the network from any of the devices.If I disconnect the CPU from the router and connect it direcly to the modem and change the IP settings to match the modem network the CPU connects without errors to the internet, iPad and iPhone connected to the router keeps having problems.Restarting the router does not change anything and it seems to be more frequent errors during heavy load hours, in the morning I have almost no problems at all, in the evenings I cant almost use the wireless devices (CPU works fine as its now connected directly to the modem not through the router).I havent changed a setting in the last year, it just came right out of the blue.I have hard reset both the modem and the router and reconfigured them (that I dont want to do again as I have some virtual servers, port forwards, port triggers and so on :P).As it came right out of the blue without me changing anything on any device and as it seems to be more frequent during heavy load hours I'm suspecting that the ISP is involved, but how can they be (it works fine with devices connected straight to the modem)?
View 15 Replies
View Related
Mar 21, 2013
I have an E900 I replaced an old Airport Extreme with. The reason was for increased download speed. The Apple router I used saw my work network and I could access files and printers; no changes to my Mac were necessary. It worked out of the box. The new Linksys has Internet connectivity but will not see my work network at all. I have looked into the old settings and cannot figure out how to make the new router see my network. I called Linksys but no dice. What settings need to be changed to see the work network? It is connected to the same ethernet cable as the other router that worked fine.
View 1 Replies
View Related
Oct 28, 2012
When i try to connect kf to wifi router, I keep getting password error message when I type my network pw. I have no problem connecting to other wifi connections
View 6 Replies
View Related
Jun 6, 2012
I bought E900, accessed setup thru 192.168.1.1, upgraded its firmware.. then changed router's IP, it reboots, then went blank, I cannot access the setup page anymore?
View 9 Replies
View Related
Mar 10, 2013
I am currently connecting my PC to a mobile phone as a Wireless Access Point to give that PC access the internet. I also have a small home network, with one other PC and a Game Console. I own a Linksys E900 Wireless-N300 Router. My problem is this. How do I share that internet connection with the rest of the home network?To the best of my knowledge its not possible to connect my mobile phone directly to my Linksys E900 Wireless-N300 Router.
So my alternative idea is to connect to the internet via one PC, set up that internet connection as "Shared." and then allow the other devices on the home network to connect thru this. My question is how do I set up my Linksys E900 Wireless-N300 Router to allow my other PC and game console connect to the internet? Bridge Mode? PPPoE?
View 1 Replies
View Related
