WR1043ND Router Dropping Connection Randomly?
Jun 25, 2012
I bought a TP-Link WR1043ND router about 3 months ago and I had a problem since then.It keeps dropping my connection randomly. If I hook my PC directly to the modem, the connection's fine.With the stock firmware, if the connection drops, I can't even access my router through its IP. I get an indefinitely loading webpage with nothing to show. I can only solve this by unplugging and then plugging in the router.DD-WRT was better, I could access the router anytime a disconnect occurred, but it still occurred.
View 1 Replies
ADVERTISEMENT
Jan 19, 2013
Region : Austria
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.4 Build 110429 Rel.36959n
ISP : TPG
I've got a problem with the wireless dropping out randomly. It may take a week before it stops or a couple of hours. I originally thought my microwave oven was swamping the signal when we used it so I relocated the router much further away but this hasn't changed anything. I can still log in to the router from a computer on the wired ports and reboot the router. It also thinks the wireless is working but everything looses connection to it. We have 3 laptops and 4 phones that use the wireless and they all cannot connect when it goes down. This is only a new device - less than 6 months?
View 5 Replies
View Related
Mar 23, 2012
* ADSL modem connected to internet
* WiFi router (Netgear WPN824v2) connected to ADSL modem
* CPU, iPhone and iPad connected to router, CPU wired connection.Everything has worked like a charm up until a couple of days ago. Now the link between the router WAN port and the modem randomly drops. Stays dropped for 1-3 secs and then connect again. When its really bad this happens with 5-10 secs intervall. This made it impossible to use the network from any of the devices.If I disconnect the CPU from the router and connect it direcly to the modem and change the IP settings to match the modem network the CPU connects without errors to the internet, iPad and iPhone connected to the router keeps having problems.Restarting the router does not change anything and it seems to be more frequent errors during heavy load hours, in the morning I have almost no problems at all, in the evenings I cant almost use the wireless devices (CPU works fine as its now connected directly to the modem not through the router).I havent changed a setting in the last year, it just came right out of the blue.I have hard reset both the modem and the router and reconfigured them (that I dont want to do again as I have some virtual servers, port forwards, port triggers and so on :P).As it came right out of the blue without me changing anything on any device and as it seems to be more frequent during heavy load hours I'm suspecting that the ISP is involved, but how can they be (it works fine with devices connected straight to the modem)?
View 15 Replies
View Related
Jun 23, 2012
i am a total n00b when it comes to wireless routers etc,.. i bought this router [E3200] about six mths ago, it has been working just fine untill a couple days ago, wher i woud be on the internet and all of a sudden, the internet connection drops, i am using a cable modem [ARRIS TM722G] ,i did a reset on the e3200 and put restore the settings that did last over night
View 9 Replies
View Related
Dec 5, 2012
Region : Argentina
Model : TL-WR1043ND
Hardware Version : v1
Region : Canada
I have a T L-WR1043ND v1.9 with the latest factory firmware that I recently purchased. Ran fine for a couple of weeks. Now my WAN connection seems to be dropping. I get an IP and DNS from the ISP but I cannot ping anything (google etc...) past the router. I have to hit the detect button or release and renew the IP in order to gain access. Then after a few hours or a day the issue reoccurs.
View 1 Replies
View Related
Oct 25, 2011
I am running Windows Vista Business SP2 and I have been having problems lately with my internet connection. I am on a DSL connection and my computer keeps on dropping the connection like every 15-20min in order to get my connection back I have to disable and then reenable the network connection, but the weird thing is that I don't get internet connection, but I can still send and recieve IM's and Mail when my internet goes down. It is not my ISP that is wrong , but my computer, because I have a windows xp and it does the same thing and I also have a windows 7 PC and that one does not lose connection when my other ones do. On my Windows XP all what I have to do so it gets connection again is click on the connection and then click repair and I get internet again, but Windows Vista does not have this option so I have to disable and reenable my connection
View 6 Replies
View Related
Mar 15, 2012
My internet is set up like this: 3G USB modem>Desktop>Router>Everyone else.This works well except that the connection randomly drops for everyone connecting through the router. Every minute or so when you load a page a message from the router will pop up saying no attached WAN device, this goes away after about two seconds but it effectively interrupts file downloads and signs you out of things. I can plug the modem directly into the router and it doesn't drop, but for some reason it increases my ping by about 15 and I have to reset the modem twice an hour or it becomes very slow. My router is a cradlepoint MBR1000 and my modem is a sierra wireless 598U. I have also tried connecting the modem to other computers but everyone connected to the router still gets random connection drops.
View 3 Replies
View Related
Sep 13, 2011
I have the unfortunate experience of persistent connection issues with my Comcast cable internet. Periodically (sometimes several times in an hour) my connection dies, and then resumes within a minute or two. It is not a long downtime but it is long enough to disrupt whatever I happen to be doing on the internet (Skype, messaging, online gaming, uploading, downloading, etc.) which can be very irritating. I know enough about computers that I've built several of my own machines, but I am no expert in networking by a long shot...
Here are my internet specs: Comcast broadband with RCA DHG535-2 cable modem plugged into a wireless Linksys router model WRT54GX.
I know the connection issues don't lie with my wireless card because I have two computers and they both drop at the same time. The issue HAS to be either the router or modem (or Comcast), but from all the other posts I've read of similar issues, I suspect it might be the modem.
View 13 Replies
View Related
May 7, 2012
For the past few months my internet connection will randomly drop for about 5-10 seconds when someone else connects to the network. I am using a wired Ethernet connection and as said when someone connects either via WiFi or also through a wired connection, the internet for me will drop as soon as the device is connected, and then randomly every 20 minutes or so thereafter. I should also mention that rarely the connection will just drop for again, 5-10 seconds even when nobody else is connected.I tried my computer at someone else's house using their router and it worked fine, no disconnects at all.
View 1 Replies
View Related
Mar 26, 2012
I am working on a business network that was setup by another tech. Basically the connection comes from the modem to a 16 port switch (13 being used), and is going to each computer.. I'm thinking of tossing a router between the modem and switch to see if this works. Basically what it is doing is each computer accesses a database on the server, and occasionally they are losing connection to the database.. I did change all of the stations to static IP as they were all dynamic.
View 3 Replies
View Related
May 24, 2012
One of our hospitals keeps reporting that their internet is going out for a while than comes back up, sometimes they even have to reset the ISP modem for this it to work again. I upgraded and switched ISP to Time Warner Cable and figured it would essentially solve the issue, but there are still reports of internet outage and our new ISP has confirmed multiple times that their end is still up. Our ASA 5505 was configured by a previous employee, but when looking at the running config I noticed that the Interface for our ISP is NOT set to Duplex Full and Speed 100.
interface Ethernet0/5
switchport access vlan 2
View 3 Replies
View Related
Jun 24, 2011
upgraded from an old 2004 Toshiba laptop to a Lenovo Ideapad Z570.Now her wireless internet connection is dropping randomly and frequently, it never dropped on the old Toshiba.Using a Linksys WRT54GS with the latest firmware.
View 5 Replies
View Related
May 24, 2012
One of our hospitals keeps reporting that their internet is going out for a while than comes back up, sometimes they even have to reset the ISP modem for this it to work again. I upgraded and switched ISP to Time Warner Cable and figured it would esentially solve the issue, but there are still reports of internet outage and our new ISP has confirmed multiple times that their end is still up. Our ASA 5505 was configured by a previous employee, but when looking at the running config I noticed that the Interface for our ISP is NOT set to Duplex Full and Speed 100.
interface Ethernet0/5
switchport access vlan 2
View 1 Replies
View Related
Jun 15, 2012
My wife, daughter, mother and I recently moved into a place together. Since moving in together, our internet connection has been less than reliable. We use a motorola modem and a DLink DIR615 router. I have a desktop with a wireless card, and my mother has an all in one with a wireless card, so we both connect wirelessly to the internet. We also use iPhones and a PS3 for internet purposes. The DLink is my router from my family's old place before moving with my mother. The motorola modem is my mother's from her place. Prior to sharing a household, I never had a problem with the router dropping signal. She, however, did have a problem with it. She was using the motorola and a netgear router. So, with that out of the way, here's what happens. The internet works fine and the network shows as available, but then suddenly the internet just goes out in all areas of the house. The network no longer shows as available. It's fixed by unplugging the router for about 10 seconds and then plugging it back in. I've tried talking to DLink about it, thinking it was a problem with the router. They even sent me a replacement router because we couldn't figure out the problem, but even with the new one it's still happening. I can also add that while we were waiting for the replacement, we connected my mother's Netgear and it continued happening. When the new DLink came, I confirmed that the router has the latest firmware as well, just in case. I can add that since sharing a network, we've been getting an IP Address conflict message on both computers. We both have Windows 7. Can anybody shed some light on this? I have some knowledge of this kind of stuff but what's happening is way beyond my scope.
View 7 Replies
View Related
May 30, 2012
I have my ethernet cable hooked up to a WNDR3400 router, and my internet connection will drop for an instant randomly (usually happens at least once every 5 minutes) it then instantly reconnects. The problem is that when i'm downloading stuff, the disconnection will cause the download to fail and i'll have to restart from the beginning (making larger files impossible to download). Also, I have an xbox in the same room connected to the router via wireless. It also has the same issues of dropping and reconnecting and that causes me to get kicked out of live.Interestingly enough, my laptop, connected to the internet via wireless does not experience this issue when used in (or outside of) the room.
View 4 Replies
View Related
Sep 11, 2012
My TP-Link WR1043ND router is constantly dropping my cable connection on a daily basis. The problem is that when it does, it also freezes or at least when I try to access it through its IP it won't show anything, but a classic 404 error page. If I reboot it by unplugging and plugging it back it works fine after that.
View 4 Replies
View Related
Jun 20, 2012
New E900 router drops PPPoE session and gets new IP address randomly every 1-20 hours. Tried different E900, does the same thing. Disabled IPv6, no change. Upgraded FW from 1.0.00 to 1.0.01, no change. I have an SPA112 ATA behind the router and it has to re-register with the VoIP provider every time the IP address changes, so I'm afraid of my call getting dropped if this occurs while I'm on the phone. Using an old WRT54G or a different brand of router it will keep the same PPPoE session for weeks, so it is not the ISP.
View 2 Replies
View Related
Dec 3, 2012
Region : Argentina
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version :
ISP :
Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 3.13.12 Build 120405 rel 33996n
ISP : Verizon Fios
(My router says Version 1.9).Had this router about a month. It works fine. Using it in Wireless mode wpa2 security. Get excellent speeds. HOWEVER> It freqently drops connectivity and fails to allow wireless clients to connect at all. (You can see the SSID via wireless clients, but not connect to it). To restore it, I have to disconnect from Power, wait a moment, then reconnect to power. It recycles and connections are working again with no problems (UNTIL NEXT TIME). Seems to happen every few days.
I checked the web site and I appear to have the most current firmware.I have a Trendnet router on different channels in another part of the house which has never had this problem. I disconnected it to test if it was somehow involved, but the TP-Link router had same symptoms when it (trendnet) was not connected. Our Actiontec Router (VERIZON provides this as base connectin to them serving the Cable TV DVRs also) ) has its wireless disabled and is the DHCP server provider to the home network. DHCP is disabled on the TP Link.
View 14 Replies
View Related
Mar 3, 2013
Region : Canada
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : Bell
I'm having to reboot what is now my 2nd router every 1-2 days in order for all connections to resume working. My 2nd router was working great since Saturday afternoon, and just now I needed to reboot in order for my laptop to connect to the network.Now that it seems pretty clear the router in general isn't faulty, I suspected that the issue was IP lease related, so I was looking at DHCP settings and changed the lease time to 2880 (max setting), from 120 (default). However, this should only prolong how often i'll need to reboot the router. So, what is it that's causing my devices to disconnect or not being able to connect to the router for a prolonged period of time?
View 3 Replies
View Related
Mar 17, 2012
As the topic says the internet keeps dropping at what seems like random times, Only for a few seconds but its enough to ruin the games I do play.Sometimes it will stay on local for like 5-10 minutes if its really bad but usually not, I've tried the regedit thing, updating wireless card driver and been searching on google for different stuff but it just doesn't seem to work.
View 14 Replies
View Related
Jul 4, 2011
I have two notebooks, one smartphone, and one blu-ray player that connects to my wireless network. My gaming PC is hard wired into the same router that broadcasts my wireless network. About 5-6 times, my wireless network will drop and everyone connected to it wirelessly will lose their connection for about 1-2 minutes. While my gaming PCs internet connection is undisturbed, all of my wireless devices can no longer "see" the network SSID and therefore connect to it. The problem has been happening consistently for many months.
View 1 Replies
View Related
Jan 24, 2011
I have a B1, FW 2.00NA. Everything works great, but once or twice a day, randomly the wifi signal will just dropout, I cant see it in my networks list, if I connect directly to my router the connection is fine. If I reset the router by cutting power wifi will start working again. Is there an beta firmware for the B1 I can try? Everything on the router is set to pretty much default.
View 2 Replies
View Related
Apr 24, 2013
Region : Malaysia
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.13 Build 120605 Rel.38634n
The connection is slow when I connect my notebook to the TP-Link TL-WR1043ND wireless router. If I connect my notebook directly to to the ISP modem, the connection speed back to normal.
View 1 Replies
View Related
Mar 1, 2013
Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : AT&T
Every 5 to 7 days my router loses connection with WAN (ISP modem) but connection over LAN is fine. It seems that 1043ND tries to connect to DSL modem from AT&T by username and password (that does not exists) instead of doing Dynamic IP. I understand that AT&T modem is of type of PPPoE but there is not a password or user id and connection must be dynamic. Page 192.168.0.1/logininfo of modem complains that I was trying to login with incorrect user id password. Every time I have to
1- connect the modem directly to my computer so the modem resets.
2- I have to reset 1043ND to factory default, reboot, and connect cables back how they were, Then go to WAN page do a release and renew to get connected to WAN again.
View 2 Replies
View Related
Jun 21, 2011
I'm using a 2wire 2701 HG-B (AT&T). Throughout the day (sometimes even 5minutes apart) the DSL light will turn red, the internet will turn off green and 20-40 seconds later they'll both become green again. It's irritating because it sometimes happens so frequently and causes me to close EVERYTHING I have opened in my browser. If I'm on xbox or an online game, it disconnects completely (even if the light is only red for 15 seconds)I have data error stats .tl;dr: 2wire modem giving me problems. DSL light turns red randomly for 20-40 seconds, sometimes up to twice in 5 minutes.
View 3 Replies
View Related
Feb 26, 2012
Recently I am having a problem during the initial start up. I am running Windows 7. After the computer starts up, I do not have an internet connection. The yellow triangle with an exclamation mark in it appears in the bottom right on the monitors. I can go to the internet connections and disable, then enable and my connection returns. This is only happening during the initial start up. This happens 3 out of 4 times during start up. I have had the cable company check everything and they are saying it is an issue with my computer.
View 1 Replies
View Related
Apr 14, 2013
Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :
Region : Netherlands
Model : TL-WR941ND
Hardware Version : V3
Firmware Version : 3.13.9 Build 120201 Rel.54965n
ISP : Ziggo
I currently have a issue with my TP-link WR941N.When I first connected the router I had a good internet speeds of about 70 mbps. My max provided by the ISP is 120Mbps but 70 was acceptable for me. Recently however the connection is terrible. I regularly have a speeds of 6Mbps via the router, When i directly to the modem via kabel I get a speed of 120Mbps. Therefore I ruled out that the connectivity problem is due to my ISP.
View 1 Replies
View Related
Jan 16, 2013
Region : Russia
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
can You create firmware for Hardrive 4 TB connection to router TL-WR1043ND via USB.
View 2 Replies
View Related
Sep 20, 2011
I recently bought a netgear n300 wnr2200 router. The first day I set up the network and everything worked fine ( my ISP don't require any passwords etc, standard automatic set up - basically just typing a SSID and a password ( WEP)). The Internet worked perfectly and my iPhone, iPad, ps3 all connects without any problems whatsoever! without any more management than typing password. My laptop, acer aspire 3820tg (windows 7) worked perfectly the initial day. After this it struggles to connect. I will sometimes get the "could not connect to ...." message. Sometimes using the troubleshoot it wil fix the problem by itself. Most times not,
What is weird is that even if I get a connection I will at random intervals get " local access only" or completely dropping the connection. ( then it usually will not connect again) He wifi signal is 100%. I'm not able to make it work in a stable fashion. I have tried updating to the latest network driver for my laptops broadcom wifi adapter (from acer driver site) but this changed nothing. Turning on/off the wifi adapter does not work. Rebooting sometimes works but it's completely random. Sometimes going to network properties and enabling active settings for WLAN will let it connect (sorry if this is not the correct wording, my windows is in Norwegian) (it's the lowest box that you can check, and when this is done you can press "configure" . When pressing it just says cisco something is enabled and showing an "okay box " )
When connecting to the router, it says it has the latest firmware.
Example today: I boot pc, get an error message saying it cannot connect. I try letting windows solve it- doesn't work. I try reboot - doesn't work. I try activate WLAN settings - doesn't work. I reboot the pc - doesn't work. Third reboot (only difference is that pc is placed in a different table in my living room) and I magically get a connection. With active WLAN setting being enabled prior to boot!
I moved my pc 5 meters to another table, wifi signal is 100% but it starts dropping to only local connection !?!? I move back, and it's working again.. Funny thing is that the router is only 7 meters from the table where it's not working ( this could be a coincidence) and i can use the wifi in rooms much further away with devices that shouldn't have better WLAN adaptors(such as iPhone). I have never had any trouble with Internet connections on wifi with this laptop prior to this!
View 4 Replies
View Related
Jan 23, 2011
Here's the problem, there are 4-5 computers connected to their router's network through both wire and wireless. Some of the other computers are used to stream tv dramas and what not, and it really kills the connection and I am barely even able to open a simple webpage.
View 2 Replies
View Related
Dec 27, 2011
I have an E2500 with the latest firmware upgrade (1.0.03). My configuration is simple, I have a fixed IP from my ISP with fixed DNS servers. I have one computer connected via cable and one connected via wireless and a laptop that gets connected on occasion wirelessly as well. I also have an android phone that I sometimes have the networking turned on and sometimes not. That doesn't seem to be affecting the router either as I've lost connections under both circumstances. The only thing I have different is I clone the MAC address as the ISP has my IP linked to my old Linksys MAC.
The problem is I randomly lose connection to the internet, the home network is still up it's just the internet goes down. I could be on the computer or not, sometimes while browsing sometimes after I browse for a while sometimes before I get started. Fortunately its not happened during one of my online games but it has happened just after I log off the game. It usually happens a couple of times a day.
View 6 Replies
View Related
Jan 6, 2012
my E2500 drops the internet connection randomly. I have no issues with wired or wireless access to the home network (sharing files, sharing printers etc...). To fix the problem I log into the router and do a soft reboot from the status page.
I posted this earlier and the only response I received was a cut and paste answer to make some changes to my wireless settings. Seriously doubting the relevance of the post I made the changes anyway and as expected nothing changed, the router still loses access to the internet without any warning. When I replied that I hadn't thought that that was the problem but that I HAD made the changes mentioned and as I expected it DIDN'T work I get no response.
View 9 Replies
View Related
Jan 16, 2012
I have downloaded netflix on our wii. We have a E1000 Linksys router.
While watching anything on Nextflix, the movie stops every 2 minutes and began loading again.
View 2 Replies
View Related
