Region : Russia
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
can You create firmware for Hardrive 4 TB connection to router TL-WR1043ND via USB.
Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : WR1043ND
The router is not showing my external hard drive in the usb settings. The Hard drive is a seagate 7200rpm 1.5tb. The hard drive works just fine when plugged into my computer. I have tried NTFS and EXFAT. My 2gb usb drive in FAT32 shows up just fine. The external has its own power supply. Is there anything I am missing that would cause it to not work?
Region : United States
Model : TL-WR1043ND
Hardware Version : V1
I have a 300GB Seagate SATA drive in a Vantec USB case devided into 3 partitions (volumes as the router wants to call them) connected to the USB port on my TL-WR1043ND touter. This setup works great most of the time, but ocassionally (maybe once every 2 weeks) all 3 WIN 7 Network Maps to this drive fail. Rebooting the router does not fix the problem, BUT going to the USB settings of the html support page and Stopping then Starting the service fixes it every time.
Region : United States
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : Charter.net
Everything is set up in the router software. The tuner detects the USB drive as a UPnP device, shows the directories I've set up for media share. If I select an AAC or FLAC file to play, the tuner loads it and plays. If I select an MP3 file, it loads, shows it as 100% buffered -- and hangs. Every time. The other devices on the router's network (wired desktop, wireless laptop, wireless tablet) can load and play the MP3s along with the other file types from the same USB-connected drive. That's why I figure the router isn't causing the problem.
Region : Australia
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
I just upgraded from my factory default and found network sharing of my USB HDD was no longer working.It came down to two bugs in the latest firmware:Even though there is now the option to share without a password that option does not work and you still need a password.And that password is the factory default of "admin" even though I have set my own password.
Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : Not Clear
Firmware Version : 3.6
ISP : comcast
what do i need to do to have my laptop access an Iomega EZ networked external hard drive? It is not my firewall on computer so Norton said it is the router.
Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :
Do not we deserve, (their customers), at least bothered to tell us?
Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : TL-WR1043ND_V1_130325
ISP : Ip dinamics
It worked correctly 2 days and 16 hours.Now, does not surfing in internet.although I can go to web interfaceI turn the gargoyle.The developers of TP-Link me tired
Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1.8
Firmware Version : wr1043nv1_en_3_13_12_up_boot(121210)_UN_beta
ISP : fibertel argentina
The TP-Link managers surely have read the constant complaints about the performance of the WR1043ND, are innumerable and of all kinds, but especially, due to instability.There are two beta versions, but they are very unstable.I beg, TP-Link, keep us informed on the development of the new firmware.When I bought this router, I was hoping a correct performance.
Region : Hongkong
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 120405
ISP : Netvigator Broadband (18Mbps ADSL)
I'm having a problem with my TL-WR1043ND becoming non-responsive after a few days of uptime.This is actually my second 1043. I bought it because my first one (hardware version 1.4) has been rock solid -- I've not had to reboot it for over 2 years. (I don't have its firmware version handy at the moment, but I recall it's from 2010.)I needed this new router for a second location, but it has not been functioning correctly. It is hardware version 1.10 and shipped with the latest firmware, 120405. is it safe to downgrade the 1.10's firmware to the one that's running on the 1.4? Or is the hardware sufficiently different (e.g. different bootloaders)
Region : Malaysia
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.13 Build 120605 Rel.38634n
The connection is slow when I connect my notebook to the TP-Link TL-WR1043ND wireless router. If I connect my notebook directly to to the ISP modem, the connection speed back to normal.
Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : AT&T
Every 5 to 7 days my router loses connection with WAN (ISP modem) but connection over LAN is fine. It seems that 1043ND tries to connect to DSL modem from AT&T by username and password (that does not exists) instead of doing Dynamic IP. I understand that AT&T modem is of type of PPPoE but there is not a password or user id and connection must be dynamic. Page 192.168.0.1/logininfo of modem complains that I was trying to login with incorrect user id password. Every time I have to
1- connect the modem directly to my computer so the modem resets.
2- I have to reset 1043ND to factory default, reboot, and connect cables back how they were, Then go to WAN page do a release and renew to get connected to WAN again.
Region : Others
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 1.8
ISP :
Region : Israel
Model : TL-WR1043ND
Hardware Version (On the back cover): V1.8
From web interface:
Firmware Version:3.13.4 Build 110429 Rel.36959n
Hardware Version:WR1043ND v1 00000000
ISP : Free
1. about USB Printer Controller
I connect my printer HP office jet 5610 All in one, his drivers installed on my computer (windows 7 ultimate, 32 bit). Irun the software "USB Printer Controller" and i didn't seeing anything. Can not click on any button. BTW, i changed the IP range from 192.168.1.1 to 10.0.0.100-10.0.0.139 and my router web interface at 10.0.0.140, if it's changing something.
2. About upgrade the router's firmware, it's safe that I'll upgrading it?
The last version : TL-WR1043ND_V1_120405
Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :
Region : Netherlands
Model : TL-WR941ND
Hardware Version : V3
Firmware Version : 3.13.9 Build 120201 Rel.54965n
ISP : Ziggo
I currently have a issue with my TP-link WR941N.When I first connected the router I had a good internet speeds of about 70 mbps. My max provided by the ISP is 120Mbps but 70 was acceptable for me. Recently however the connection is terrible. I regularly have a speeds of 6Mbps via the router, When i directly to the modem via kabel I get a speed of 120Mbps. Therefore I ruled out that the connectivity problem is due to my ISP.
Region : Ukraine
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.11 Build 121102 Rel.51321n
ISP : Volia
Is it possible to extend the functionality of USB in future firmware for data transfer? More detail about the problem [URL]can at least in beta partially implemented increase data transfer USB?I bought this router, and as all users lose .... With the Internet, download files faster than with external screw via USB.
Region : Argentina
Model : TL-WR1043ND
Hardware Version : v1
Region : Canada
I have a T L-WR1043ND v1.9 with the latest factory firmware that I recently purchased. Ran fine for a couple of weeks. Now my WAN connection seems to be dropping. I get an IP and DNS from the ISP but I cannot ping anything (google etc...) past the router. I have to hit the detect button or release and renew the IP in order to gain access. Then after a few hours or a day the issue reoccurs.
Region : Austria
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.4 Build 110429 Rel.36959n
ISP : TPG
I've got a problem with the wireless dropping out randomly. It may take a week before it stops or a couple of hours. I originally thought my microwave oven was swamping the signal when we used it so I relocated the router much further away but this hasn't changed anything. I can still log in to the router from a computer on the wired ports and reboot the router. It also thinks the wireless is working but everything looses connection to it. We have 3 laptops and 4 phones that use the wireless and they all cannot connect when it goes down. This is only a new device - less than 6 months?
Region : Germany
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 121127
is it possible to use the Print Server on the TL-WR1043ND without installing the "Printer Controller Utility"? I have a HP LaserJet 1022 (in compatiblity list) connected which is recognized by the TL-WR1043ND. I want to connect the printer manually to my Windows PC using standard tcp/ip port, but I can't get it working. I tried RAW with Port 9100 and LPR with lp1. What are the right settings??
I've recently bought a TL-WR1043ND & i'm trying to connect my Sky+ box to the Internet. When I connect the box directly to my broadband router all works OK. When I connect via an Ethernet connection on my TP-Link router - it get's an IP address from the router but it will not connect to the internet.
View 4 Replies View RelatedRegion : Netherlands
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : V1_120405
ISP : UPC
After buying and installing i get no wlan/wifi connection.I do have internet by ethernet, the laptops and ipad sees the wlan/wifi but get no connection? Resetting re-installing manualy or with the wizard doesn't work.
Region : Belgium
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : Telenet
I've just bought a TP-Link TL_WR1043ND and when I was configuring the wireless settings first I had a +- 40Mbps connection,a little later the connection dropped to 4Mbps and was constantly dropping the speed.Sometimes it went to 15Mbps and then it drops back to 4Mbps.Right now its only 1Mbps.
Configuration:
Wireless channel: 11
Mode: 11bgn mixed
Channel width: Auto
Max tx rate: 300Mbps
Wireless router radio and SSID broadcasting enabled
[code].....
Region : Sweden
Model : TL-WR1043ND
Hardware Version : Not Clear
Firmware Version :
ISP :
Have just bought this new router and it works faultlessly on all laptops and mobile phones in the house except for a laptop running Vista, the TCP IP properties look all right, it asks for a username and password ( only if connected by an ethernet cable, otherwise it cant access a network) but they are not accepted, the same username password was accepted for al the other computers
Region : Netherlands
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.4 Build 110429 Rel.36959n
ISP :
I have a flaky internet connection, and it drops every few days. I've thus far powercycled my router by unplugging and plugging it back in, which fixes the issue.
I'm traveling soon, and would like to be able to have access to my stuff remotely, even after the connection drops.
I have two ideas:Run a script in Windows 7 which would soft reboot the modem - free, not sure if soft reboot is enough though. If that doesn't work, Get a hardware which would powercycle the router - haven't researched if these are readily available and cheap
Is there a way to schedule a soft reboot of my router using Windows system tools? I'd schedule it to reboot every night.
Region : Others
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : Baltcom TV
I have very low speed with router.First test without router - using cable directly to PC (DLINK DGS-3210 Managed SW - > My PC), here is result : Second test, using WR1043ND router (DLINK DGS-3210 Managed SW - > WR1043ND Router -> My PC), here is result : First of all, i thought that maybe WAN port is 100Mbit mode, but after i checked it on SW - port is still in 1Gig Mode (from router to PC, it is also 1Gig)Also downloading speed have same picture...Without router i get around 55MB/s, with router max that i saw is ~14MB/s....
Region : Canada
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 1
ISP : Kwic Internet
I have up graded to Windows 8 PRO but when I try to setup a wireless network Windows cannot find my router.
Region : Others
Model : TL-WR1043ND
Hardware Version : V1
Which WORKGROUP does router have for sharing? I need this, because I have WD TW live and want to access routers usb hdd through sharing. Because router media server only supports up to 100 files, I see no other solution.Is there anyway to set the workgroup
Region : UnitedKingdom
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12
My router is not working wireless. Just stopped working. I hadn't touched anything in the settings. Nothing is picking up it's signal. All the lights are on saying that it SHOULD be working!I checked all the settings and they were as before. I have unplugged it and restarted, I have reset to factory settings and set it back up again but nothing! Works fine on the wire.
Region : UnitedKingdom
Model : TL-WR1043ND
Hardware Version : Not Clear
Firmware Version :
ISP : Virgin Media
Bought recently and I'm very pleased with Setup and Performance.
However, even though I have tried repeatedly with different user details and passwords I cant access the router Config without resetting to defaults using the pin in the back and admin admin.
I am using W7 and get to a log in screen via Control Panel / ... Network Sharing Centre / Network Map and see Router. Click on this and up comes a User Name and Pasword form but it never works with what I entered for the router.
Region : UnitedKingdom
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version :
ISP :
certain websites couldn't be accessed on any of our devices (mixture of PC's, android and apple devices)After trying everything I could think of and even phoning our internet provider nothing would get the sites to load (Facebook, hotmail to name but two)A friend of mine also said he was having exactly the same problems whereas no one else I know had any problems!.Anyway, after much scratching of head with resetting the router to factory defaults etc the only thing left to test was a direct connection with the modem where all websites worked perfectly!So the problem is 100% the router! Even after a factory restore it still doesn't work with those websites and after talking to my friend it turns out he too has a tp-link router but a different model.
Region : Austria
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.4 Build 110429 Rel.36959n
I have a problem with the combination of the TP Link router and a samsung smart tv (Samsung UE46ES6300). Every thing works fine, but I can't show videos or images from a usb-hdd connected to the router (Media server is started)I can access the files with my windows pc and windows media-player. AND I can view content on the usb-hdd connected to the router, over allshareplay for windows and send it to the tv.But I want to show videos on the usb-hdd without my pc. I see the TP-Link Router as a source on allshareplay on the tv. When I click on it, there is a error message, that the request can't be executed.
Region : Argentina
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version :
ISP :
Region : Argentina
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP :
I have a WR1043ND
Firmware Version:
3.13.12 Build 120405 Rel.33996n
Hardware Version:
WR1043ND v1 00000000
I tried to connect a WD MyBook Essential 3tb hdd NTFS, but it never recognized it. Of course, I connected it with the external power supply.With a 15gb pendrive FAT32 it works OK.
Region : Russia
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version :
ISP :
Region : Russia
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : wr1043nv1_ru_3_13_10_up(120614)
ISP : netbynet
Connection to a router on a cable speed of dowstream-50MBit/s, upstream-3Kbit(!) wifi-dowstream-50MBit/s, upstream-3KbitA cable directly in the personal computer to 70 Mbps there and back.Measured speedtest.net, and as [URL] The matter is that even elementary with an investment it is impossible to send mail - I am connected by different devices-2 of the laptop and 2 smartphones - the same. Technical support of provider already talk sense only in a router. Insertions updated, changed - the same( Firewalls are disconnected, any more don't know what to do and where proceeding speed and all digs-is killed. Russian forum TP-Link is idle.
Region : Austria
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version :
unfortunately I've lost my device pin and I've reset my device.can I get the device pin on a other way? on my invoice there is no information about that.