Linksys Wireless Router :: E3000 - Cannot Connect Samsung CLP-315W Printer
Feb 11, 2011
Trying to connect a Samsung clp-315w wirelessly to my E3000. I plug the Ethernet cable into both to configure the printer and I cannot access the printer via its IP address. I suspect the printer is reporting the wrong IP address or it the IP is not being assigned by the router or it is being blocked by the router. Routers firewall is off. I use the Samsung software and it does not see the printer either. It seems the router is not seeing the printer or allowing it access to the network. Spent much time with a good Samsung support person and tried everything and narrowed the problem down to the router connection. Is there a setting on the router which needs to be changed to allow me to see the printer to configure it for wireless access?
View 6 Replies
ADVERTISEMENT
Sep 25, 2011
I get a great wired connection but when I try for wireless the Samsung says I have a great connection, except when I try to use the Apps from the Blu Ray it tells me, No Internect Conncetion. Samusung support tells me I need to "open the ports" on my E3000 and make the Blu Ray a priority...I don't know how to do that.
View 7 Replies
View Related
Jul 26, 2012
Just purchased an E900 wireless router and cannot figure out how to connect my Samsung wireless printer. The printer has a WPS button, but the router does not. The router wants me to input information into the Samsung printer, but the printer has no screen, and I cannot find a place to input the router info anywhere in the Samsung software. I am going crazy here...I'm not a techie, but I'm also not a complete technology idiot.
View 2 Replies
View Related
Feb 16, 2011
I have a Samsung CLP-315W printer wireless that i cant communicate with. I get network printer status not available. I contacted Samsung support and they said to talk to my router manufacture and get the network configuration and enter it manually.
View 9 Replies
View Related
Oct 7, 2012
Have a Samsung tablet supported by Verizon wireless. I need to connect to my home HP printer, but do not have broadband in the home, Can I connect the printer to a router and access via my tablet?
View 1 Replies
View Related
Aug 9, 2012
My friend just started his business. There are 5 people working here including both of us. He bought a Samsung 2165W. He wants all of us to use this printer. What do we have to do? None of the PC's are on a domain. The printer has no ethernet jack. Do we just have to buy a router? Can we print via the ip address of the printer. We are using Vista. We installed the CD. We tried to install via USB. They wanted some numbers. We tried via WPS but we couldn't since there is no router.
View 7 Replies
View Related
Mar 3, 2013
I was wondering if there was a way to connect a wired printer to my linksys E3000? or am I still stuck with using my spare desktop.
View 4 Replies
View Related
Jan 21, 2012
Every day our various win7 computers lose connection to our home wireless HP printer, usuall when on standby or sleep. We basically have to add a printer to find it again each time. I looked at the router E3000 setup and the dhcp release by deault is 0. I can't find any documentation on how make that permanent or do not renew.
View 1 Replies
View Related
Feb 15, 2012
So now I have a good connection with my secondary router going to my acer a500 android tablet, my laptop, and panasonic viera tv. All is good thus far. However, I cannot connect my Samsun BD-C7900 Blu Ray. What is really wierd is that the 5 Ghz and 2.4 Ghz have two different names on my router (cause that is what the cisco support tech told me to do- give them separate names) but on the Samsung BD-C7900 - it shows that there are two signals coming in but with the same name! When i tried to connect i get an error message. Keep in mind my E4200 v2 is secondary router connected to fios actiontec.
View 1 Replies
View Related
Sep 21, 2011
When I try to connect the galaxy to the wireless network, the tablet shuts down (to the start page, unlock page) when it is searching for the ip address for the network. The firmware is 1.55.02. Cannot get upgrade as not available from Cisco. Have disconnected all other devices from the network in case there is some interference problem.
View 1 Replies
View Related
Mar 26, 2013
I've Linksys EA6500 router and tried to connect my Smart TV (Samsung UE-40EH5307) via cable.DHCP server is turned on
1. TV can't get IP address
2. When I entered IP, Gateway, DNS manualy in my TV it connects to router but not to internet.
3. When I switch cable to my laptop it registered and get dynamic IP without any problem.
4. I've insert WIFI adapter into TV and it connected and got dynamic IP without any problem.
View 9 Replies
View Related
Aug 30, 2011
shows connection to cable modem, shows IP lease, able to renew and release lease. shows all DCHP clients, but does not allow internet to get through. tried cloning old routers MAC, no dice.
View 6 Replies
View Related
Apr 16, 2010
I just purchased an E3000 to replace my WRT54G.I set up the E3000 through a wired connection from my Comcast modem to my desktop (running Windows 7).Through Cisco Connect, I was unable to connect to the internet. The desktop connects to the E3000 but the E3000 does not connect to the modem. I've tried to reset the E3000 and power down both the E3000 and the modem yet I still cannot connect.I swapped my WRT54G back into place and my connection is fine while I figure this out.
View 4 Replies
View Related
Feb 21, 2011
E3000 uses WPA secutiry...Nintendo DS ONLY works with WEP security.
Can I change my E3000 to WEP? on a Nintendo support site per this issue, it says:
Routers using the Cisco Connect software default to WPA security, which is not compatible with online multiplayer with Nintendo DS Game Cards. To change your wireless security mode to WEP, you will need to use your router's web utility instead of Cisco Connect.
A) is that true
B) if so....HOW?
Bottom line, I NEED to be able to do this. If it's not possible, than I made a very bad purchase decision & will never do so again
View 3 Replies
View Related
Nov 1, 2011
i was having issues with one of my devices after a power outage. all my other devices worked (laptops, xbox, iphones, etc)i thought doing a reset on the router would get the odd device working again but all it did was mess up my internet. i don't have the key or cd any longer from when i set it up.
View 9 Replies
View Related
Nov 14, 2011
My network is Cable modem -> RVS4000 (does my VPN) -> E3000 (does my wireless)Cisco connect seem to deal with this issue and I want to use the guest feature of the wireless.
View 1 Replies
View Related
Apr 17, 2010
I have comcast Triple HD cable internet and I have been using a low end 5 year old Linksys Router. I decided to upgrade and get the E3000. So far I have had no luck at all getting it to work. Setup fails to even connect at all. I spent 2 hours on the phone with tech support. There were in trying to get it up and running but we have been unable to get a TCP/IP number from my provider (comcast). I hooked up the old router to see if any of my settings looked unusual but they seemed normal.
View 9 Replies
View Related
Oct 9, 2011
I've had my E3000 for almost a year now and it's been great - until recently. Latencies have become patchy for some users and most surprisingly, the 5GHz network has stopped using two channels. I did a 30/30/30 reset on it a few minutes ago and re-configured the whole thing. It's set to use 40MHz Only and WPA2 Personal, but speeds at the physical layer are still just 144 Mbps and in the web interface's Status page it clearly says "20 MHz".
Why might this be? It was fine for so long, only to refuse to use two channels now. I've checked what the other wireless networks in my area are like, and none of them are even 5GHz-capable as far as I can tell, so the relevant spectrum shouldn't be overcrowded. It's rather nice to have the two channels for NAS transfers and streaming and such.
After manually specifying a base channel (48 at the moment), it actually kicks into 40MHz. The problem is now that my clients, both using a WUSB600N, are getting "Unable to connect to (SSID)" pretty much instantly after clicking the network in Windows.
View 1 Replies
View Related
Mar 25, 2013
I have a cable modem with an E3000 router, wired to my desktop. Internet connection is fine for my desktop, wired to Xbox, wifi for Iphone, Ipod, but no connectivity to my laptop wirelessly. I have run the repair automatically on my laptop (Windows 7) and get 2 different messages when trying over and over to use this tool. 1. Network Configuration Problem 2. Problem with wireless adapter or access point. I get a "fail" when trying this:
1. If your client device has a Wi-Fi Protected Setup™ button,click or press that button and then click the button on the right. or when putting in the router's pin number.
View 4 Replies
View Related
Nov 2, 2012
releasing Cisco Connest software for MAC OSX 10.8.2 Mine doesn't work anymore with the wireless Linksys router E3000
View 1 Replies
View Related
Aug 31, 2011
I have Cisco Connect and E3000 router running on Mac OSX 10.5.8. The router is working and I want to add another device, but when I try to start Cisco Connect, it starts to launch, but it stops and will not launch. The icon starts to appear on the Icon bar and then fades away. What should I do?
View 1 Replies
View Related
Aug 23, 2011
I just bought a e3000 and I have a 24 ports switch. I would like to plug more than 8 pc...how do I proced ? I used to have a dlink router and just plug a cat5e from the dlint to the switch ... but it doesn't work with the e3000
View 5 Replies
View Related
May 5, 2011
I've not been able to connect to my to Linksys E3000 when set to 5GHz "N" only Network mode. Connections to the 5GHz can only be done in mixed mode. I do not need to have A-Mode enabled, so I do not wish to use mixed.
View 4 Replies
View Related
Aug 20, 2011
I have the E3000 router. I set it up about a month ago and had my laptop and iphones and ipads all hooked up and working great. About two weeks ago, all of my devices are having problems connecting to the network and if they do connect, it is unstable (slow speeds or constantly dropping from the network). I know it is not the internet due to the fact that my LAN connection (hardwired) runs great. I am pulling my hair out trying to figure out why. I have restored to factory defauls and started over setting it up with no change in performance. I have the latest drivers on the router and the laptop. I thought maybe it was vista and my laptop or network card, but the fact that I cannot get my phones or ipads to connect with good performance I am starting to think it is something to do with the router. Also, just for more info, I am using Chater cable internet. I am running vista 64x on the laptop.
View 1 Replies
View Related
Dec 22, 2010
I have been using OpenDNS for a long time, and I just got the Linksys E3000. When I tried to change the settings to add OpenDNS it said that some changes may cause the Cisco Connect software not to work anymore.
If I change the Static DNS 1 and 2 [URL] will I still be able to use all of the functions in the Cisco Connect software?
View 9 Replies
View Related
Apr 8, 2012
Not sure how I got here, but I cannot now connect to the E3000 using the Browser Utility. USing https://10.x.x.x, shows certificate warning page, then when I continue "Internet Explorer cannot display the webpage".DId NOT change the host hame.Last time I used the Browser Utility (weeks ago) was to disable the wireless to check something. Reenabled the wireless, no apparent problems until today when I tried to access via the Browser Utility.As I never ran Connect, there are no settings to change, and now it cannot detect the device.I guess I'll wait until I HAVE to change something, and do a 30-30-30 reset.
View 1 Replies
View Related
Apr 7, 2011
I just bought a new E3000 router less than 2 weeks ago. I spent hours with my tech guy setting up the router so that I was getting excellent internet speed and the connection between my computer and my nas was maximized. In the process of setting up the router my laptop (Windows 7) and the basement laptop (Vista) were set up to access the router. Both work perfectly.These are now the only two devices in the house that can get internet access.The other devices that should connect are:
-2 Laptops (both Vista)
-1 iPhone 4
-2 iPhone 3gs
-1 Printer
I can't get them to connect. I spent an hour with a guy at Cisco tonight who just couldn't seem to get past the idea that it was not the laptop that was the problem.
View 9 Replies
View Related
Jul 6, 2011
Woke up this morning to the friendly 'No Internet access' message in the system tray. Thought it was the laptop but it wound up being the router (I guess).I can connect directly to internet via the cable modem (Comcast) but can't get a connection through the router.There are no IP addresses listed on the router admin page.Renew IP doesn't work.Everything was ok last night. I've had the router for a year or so and except for having to reset it every week or 2 for WiFi connection issues,it's worked pretty well.I soft-reset the router but then couldn't connect to 192.168.1.1.Hard-reset and still can't connect to 192.168.1.1.I do see connection lights. Just can't get to it.
View 9 Replies
View Related
Nov 3, 2010
I had a simple PPTP VPN server running behind my old DLink router. When I installed the E3000 the VPN clients could no longer connect. The port forwarding for PPTP is turned on and VPN passthrough is enabled. The PPTP server reported GRE47 checksum failed. The linksys chat tech was not beneficial. How to get a PPTP route to work?
View 5 Replies
View Related
Apr 25, 2012
I tried all methods: Cisco Connect (on Vista), http and https, but none works. However, the router seems function correctly. My laptop can acquire DHCP address and browse via the router. But I just cannot connect to the router to perform Admin tasks.Problem: when I launch CiscoConnect: the GUI shows "Cannot access your router", even though I am using the router to browse the net wirelessly and wirely. Using browser to navigate to http://192.168.1.1 and https://192.168.1.1 also give me cannot access error!
View 1 Replies
View Related
Nov 26, 2011
Connecting The Internet by Ethernet Lan-cable (without a router), ping to Yandex.ru is 4 ms. If we connect by router ping is 27 ms. If we ping by web-interface it is 4 ms. Connecting by Wi-Fi it is 27 ms.I' ve substituted the cable connected router and computer. So my questions are: why ping is rising when I connect to the Internet by router?
View 1 Replies
View Related
Jul 26, 2011
I have external hard drive connected to E3000. It is formatted as NTFS and working fine. However if I disconnect from router and connect to PC usb port directly, I get a message that hard drive needs to be formatted.
View 2 Replies
View Related
Dec 12, 2010
I just purchased the E3000. I am trying to set up my laptop with Cisco Connect software but my CD seems to be broken now. Is there anywhere I can download it?
View 9 Replies
View Related
