I can't connect my Epson Stylus SX130 printer/scanner via the USB port on the Linksys E4200. It all ends up with cisco referring me to this website. I re-installed the printer/scanner, but it didn't work. The Stylus SX130 works fine when I connect it directly to my computer.
View 6 Repliesjust bought a gateway dx4860 with wifi and a epson printer stylus nx230 wifi also. im having a problem to connect it wireless.
View 3 Replies View RelatedI have an Epson Stylus D88 printer connected by USB to my Windows XP desktop that is connected to my router by an ethernet cable.
I would like to print through that printer from my Win7 laptop wirelessly, but when I follow the "add printer" steps I get told; "Windows can't find a driver for EPSON Stylus D88 Series on the network. To locate one manually, click OK. Otherwise, click Cancel and consult your network administrator or the printer manufacturer's website."
I am trying to get my printer to be able to use it from my phone and I need the SSID and then the password and Idk them.
View 2 Replies View RelatedI can't get my Epson Workforce 615 (610 series) All in One Printer to connect to my WRT54G router. I was on the phone with Epson for over an hour and renetered my SSID and security code 4 times. They said it was something about the router not letting it connect. The printer sees the SSID and I put my laptop in the same location as the printer and it has very good signal strength. I even took the printer back and got another one. The router does not have MAC filtering enabled.
View 5 Replies View RelatedI have one of the above units which has worked fine since i first set it up over a year ago.Yesterday I tried to add an Epson sx425 WI-FI printer, I followed the instrucions and it connected ok however it started to drop the link intermitently and kept failing to print (which was also crap from my machine and total jibberish from any other!) then it lost it all together and all the other wireless devices lost their connection .The router reported it was ok with good signal strength but nothing connected so I switched it off for half an hour and rebooted but it was still the same so I tried to change the pass word but still nothing will connect. I have tried to reset the router also but this had no effect. the units plugged in via wire are working ok it is just something to do with the wirless signal.
View 26 Replies View Relatedi try to connect my laptop wirelessely to my Epson printer epson 720WD , i dont exactly every thing write as it says it temporarly need a usb cable to connect wirelessely to the printer done that after that it started checking mac adress every thing ,but at the end what i get is installation failed .it says chanell conflict has been detected , how can i sort my router channel and the printer channel
View 7 Replies View RelatedI have a printer (epson cx6600) I wanted to connect to our router here so everyone can print to it. It only has a usb connector (which you would typically connect to your pc)... I did notice they have usb to lan cables out there and was going to buy one and connect it to the router that way.
View 1 Replies View Relatedneed to find SSID from my network security key and mac address filter - active/disable DHCP. trying to connect EPSON WF610 WiFi to my imac in a home network?
View 2 Replies View RelatedGet "router/acess point channel conflict error and when I try Epson scan icon it tells me it cannot communicate with scanner.When I reinstalled CD, it told me the installation failed as some files necessary fo set up were missing.
View 2 Replies View RelatedI recently purchased an Epson XP-205 Wi-Fi printer, and I set it up on my network and installed the drivers to my laptop, initially I could print over the network, but since a restart I can't. I have tried an uninstall and reinstall of the printer, but to no avail and if it matters, I'm running W7 64-bit.
I've ensured the printing programs are part of my firewall exclusion rules, and I can access the printers set up page via 192.168.1.3, also as expected, the printer is "pingable". On top of this my Android tablet is able to send things to the printer, so I'm sure it is an issue with my laptop.
what do i need to do to be able to print from my macbook air to my epson r280. i have a wireless network set up. computer attached to the printer is a dell running windows xp home edition
View 2 Replies View RelatedRecently i bought a new printer: Epson SX620FW, I've tried many things, but I can't connect it wireless to my network. Ive downloaded and installed the latest drivers and software from the internet. My PC is connected with a cable to my wireless router. When I connect the printer with a cable to my router everything works perfectly. But I want to connect my printer wireless. On the printer I disconnect the cable. I followed the wireless wizard setup on the printer and I connect to my wireless router. This is confirmed by an ip adress on the printer. Also in the menu of my router I find the ip adres of my printer in the DHCP clients list. So far so good. But from my PC I can not find the printer in my network. I also cant ping my printers ipadres. When I connect the UTP cable to my printer again, I can ping the ip of my printer.
View 2 Replies View RelatedI have 2 Samsung NC10's here at home that I would like to be able to print using my new Epson PX720WD wireless printer.The printer is fine when sending doc's or images from my main PC, but I suspect I need to load the same software via the CD onto these laptops? Problem with that is they don't have CD drives. Am I thinking along the right lines here? If so, is it possible to drag the info onto a memory stick, insert into laptop and off I go?
View 3 Replies View RelatedWe have finding the projector in the network. When we connected a Epson projector and a laptop in different access points in wireless, we can found the projector in the network. But when we connected them in same access points in wireless, we can't found the projector. We need to find the solution of it. We are using Epson PowerLite 1761W projector and the access point is WAP4410N with firmware version 2.0.6.1.
View 1 Replies View RelatedWin 7 computer wired into D-Link 615 router (address of 192.168.1.1).Set win 7 computer static address at 192.168.0.100. Then set Epson wireless at 192.168.0.103.DCHP IP address range 192.168.0.105 to 192.168.0.199.Computer finds printer and everything works fine for about a week. Then computer can no longer ping the printer.
View 2 Replies View RelatedWhat is the ip address for my epson xp-300
View 1 Replies View RelatedI am trying to an Epson WF 545 to connect to a wireless network. I get an error message when it fails to connect to a networked iMac. The message says, "Entered security key/password does not match the one set for your router/access point."Several weeks ago, I had to reset my wireless network password/security key. That reset worked for our 3 PCs and 2 Macs including this iMac...the one that now doesn't connect to the wireless printer or maybe vice versa...why the iMac can't connect to the Epson (or vice versa), but the iMac does connect to the wireless network, and in order to do that, it makes use of the new network password / security key that I just put in the Epson to set it up in the network. Can you tell me if the wireless router somehow has a password / security key that I did not change when I changed the wireless network security key? The new network password/security key that I entered in the Epson is correct.
View 9 Replies View RelatedI have a laptop (Windows XP 32bit) and a new desktop Windows 7). The Epson rx595 is connected to the desktop. A network has been created and I can share files, but the laptop will not recognize the printer
View 2 Replies View RelatedCan not connect computer to Cisco Connect -.Receive error msg 82BD0305. Reset to EA3500 to default and reinstalled software.
View 8 Replies View RelatedI have a wireless Linksys E1500 router, and for quite a few months now, my router just stopped working properly. It quit, I unplugged everything and plugged it back in, and it worked, but from that point on, it's been displaying this:
I've tried changing the Ethernet cables
I HAVE AN EPSON SX435W WITHOUT THE DISC. EVERY TIME I DOWNLOAD SOFTWARE. MY PRINTER SAYS IT CANNOT FIND THE PC. WHY?
View 1 Replies View RelatedI have a multifunctional printer epson cx8300 and have it connected to a print server TP-LINK TL-PS310U in a hope that every PCs on the network can share the printer to do printing and scanning. When I did a test to check if I can send a job to the printer, I could actually print it through the print server. However, the problem now is I can not scan a document. When I went to open windows Fax and Scanner window, unable to see any scanner there. So my question is whether this is the limitation of the epson printer itself or the print server or the scanners do not work on the network.
View 1 Replies View RelatedI purchased a Epson Artisan 835, which I am runnung wireless. When I try to check the ink levels from my laptop they are all greyed out. Epson tech said the Dir-655 was the problem and that I needed to get the router to give permission for the ink levels to go through.
View 14 Replies View RelatedI just bought the e1000 router today and I'm already having trouble. I got it setup the first time and all my computers set up with it and it works fine for internet. Everything is snappy and responsive and I don't have any of the problems I did with my old belkin. However, I am unable to connect to the router using cisco connect or the web interface. I need to forward ports, configure wireless security, etc etc. All I did was disable the guest account through cisco connect, and then when the software just sat there doing nothing with the spinning circle in the middle, I opened task manager and killed the process to get it to go away. Now I can't connect using either cisco connect or the web interface.
View 7 Replies View RelatedThe printer, EPSON SX515W Series, is connected to the old computer, plugged in. The other laptops were not connected to the printer and would print as wireless. However now only the old computer prints directly to the printer, the other laptops fail to print it says that the laptop has the EPSON printer as it's default printer yet when ever I try to print, an exclamation mark in yellow triangle appears on the icon, in the control panel>printer section. Troubleshoot does not fix the problem either.The other problem is I can't remember how this was set up as my dad did it, and he will kill me if I don't fix it back. Also the old computer is different to the laptops. Old computer has Windows XP, and the laptops are vista.
View 3 Replies View RelatedI'm trying to use an EPSON WF2530 printer over wifi from my laptop Everythings fine until the printer gets turned off and on and the router assigns a new (different) IP address via DHCP.
I can run:
sudo nmap -PR -sP 192.168.1.1/24
which returns a list of MAC addresses and IP addresses on the LAN and then manually set the printer properties to the new IP address or I can log into the WiFi router and inspect the DHCP table then do the same thing What I'd really like to be able to do is have Ubuntu handle this automatically, e.g. it queries the MAC addresses on the LAN, finds the printer, extracts the current IP address and sets the printer properties appropriately? have to check the printers IP address every time I want to use it.I don't want to go down the route of having a static IP table
router is Cisco Linksys Dual-Band Wireless-N ADSL2+ Modem Router with Gigabit WAG320N
I have a WRT54GS which works fine with Linux both from both wired and wireless computers using Linux. But I reinstalled Win XP and now I can't reestablish a connection following the EasyLink advisor. I did have a connection under Win XP before.
The last instruction on the Easylink advisor tells me to look for something marked "local" I don't find that word on the screen.
When I try to go to192.168.1.1 it says connection interrupted. If i use the Cisco Connect it tells me i am not connected to the internet. My pc is connected via ethernet cable. My son can pull it up on is laptop and is connect the our Linksys E3000 wirelessly. I can go online, I just cant get to the router.
View 9 Replies View RelatedIf I update my firmware on my EA2700 router to be able to use the Cloud, will I loose the ability to connect to my router on 192.168.1.1 ? If this is so, why couldn't linksys let you use both Cloud and 192.168.1.1 in their latest firmware?
View 3 Replies View RelatedI want to use cisco connect with the Router E1200. There is a wireless connection between laptop and E1200 Router. When I run the "Cisco Connect" after couple minutes searching It can not find the Router and I have to put an (Router name SSID) and password.
View 9 Replies View RelatedI bought a Cisco-Linksys E3200 8 months ago and it worked well until last month. I usually power down the router after midnight & power up in the morning and evevry time it can connect to internet through DSL modem without problem until this Feb. Most of the time after powering up the router it just can't connect to internet anymore. I am sure the AT&T DSL modem is working. I have to reboot/reset the router & DSL modem several time to get router to connect to internet again. The order of resetting/rebooting DSL modem & E3200 router seems to make no difference. It just appears suddenly the router can connect to internet by chance. I changed router IP and it didn't work either. It's really annoying becuase I have to spend 10~40 minutes to resetting/rebooting DSL modem & router to get internet connection every day.
View 9 Replies View RelatedI am trying to set up a wireless repeater at home and it requires that I get configuration settings from my wireless router.However I can't access the router configuration screen.The router is a Linksys WRT54G.I am trying to access it using the IP address 192.168.1.1.I keep getting an error that says the page cannot be accessed.
-I have tried using both my a wireless and wired connection to the router. I confirmed the internet connection before attempting this.
-I have tried using internet explorer and Firefox
-Some posts on this site suggested trying 192.168.2.1, and 172.16.106.1, neither worked (they timed out)
-I typed ipconfig and into the cmd prompt and found that 192.168.1.1 IS my default gateway
-I tried adding the "s" (https://192.168.1.1) and got a username and password prompt.I do not believe I ever set up a username and password for my router.