I have a laptop (Windows XP 32bit) and a new desktop Windows 7). The Epson rx595 is connected to the desktop. A network has been created and I can share files, but the laptop will not recognize the printer
View 2 RepliesI have an Epson Stylus D88 printer connected by USB to my Windows XP desktop that is connected to my router by an ethernet cable.
I would like to print through that printer from my Win7 laptop wirelessly, but when I follow the "add printer" steps I get told; "Windows can't find a driver for EPSON Stylus D88 Series on the network. To locate one manually, click OK. Otherwise, click Cancel and consult your network administrator or the printer manufacturer's website."
\toshibapictures is not accessible. you might not have permission to use this network resource. contact the administrator of theis server to find out if you have permissions.
I have a little small network created with 6 computers. 5 of them are windows xp home and pro. jsut bought a new laptop with windows 7 64 bit home pre. All the xp laptops can share files easily but the windows 7 is giving me a really hard time.
The win xp computers can see the windows 7 folders showing up in my network places but when i try and open then it gives me this error "\toshibapictures is not accessible. you might not have permission to use this network resource. contact the administrator of theis server to find out if you have permissions"
I need setting up File/Folder/Printer sharing in small office LAN and also secure Files (password protect) among users. I have attached two JPG files in which i have tried my best to show the network diagram and how i want to share the files and folders. All the PCs are connected and i have made one Windows 7 Ultimate PC acting as File Server keeping its D Drive in sharing with other five Windows 7 Ultimate PCs acting as clients. I just want to know how to protect Files as per my requirement. There are no fixed PC of any dept users. All the users or Dept Head use any PCs as per availability.
View 1 Replies View RelatedI just recently bought a windows 7 laptop and got everything set up to my preferences... or so I though. I was walking past my fathers computer and noticed he was browsing through MY computers files through windows media center, I thought I had told everything on the control panel/windows setup to NOT share files but I am finding more and more that I all my media/data is wide open for everyone to access
View 1 Replies View RelatedWin 7 computer wired into D-Link 615 router (address of 192.168.1.1).Set win 7 computer static address at 192.168.0.100. Then set Epson wireless at 192.168.0.103.DCHP IP address range 192.168.0.105 to 192.168.0.199.Computer finds printer and everything works fine for about a week. Then computer can no longer ping the printer.
View 2 Replies View RelatedOk, I have a new win 7 pc and my old win xp pc has all my video and picture files. On both of my xp pc's i can transfer files via my network places. Can I and if so how do I do that from the xp pc to the win 7 pc? I can stream the videos from the xp on the win 7 but not transfer them.
View 17 Replies View RelatedMy win xp pro 32bit cannot add network printer kxp1121 from win 7 64 bit which is using epson lx series 1 (80). Request driver ' unknown Inf'
View 1 Replies View RelatedI have a win xp laptop which connects via wireless to a cheap belkin router I have a Win 7 pro laptop which is hardwired to the router. The Win 7 machine is NOT set up for home groups. We are all on the same workgroup.
I have added the user name from the XP machine to the Win 7 pro machine with admin rights. I shared a folder on Win 7 and added the user name and gave read/write rights. I have no software firewall.
When I try to connect via win explorer via the workgroup I see the Win 7 machine (after 10 seconds). I see 'User' folder which I can browse and I see the folder that I shared but I can't access it. Access denied...
I was wondering what settings need to be set, and what needs to be done on both computes, i have Printer sharing up and running with no problems but i can't seem to get my mac to be detected on my main Windows 7 PC. I am able to connect to my Windows 7 PC but can't seem to get my mac to show up. Also i have connected it to the Windows 7 workgroup and still nothing.
View 2 Replies View RelatedThe Windows XP SP3 PC can login to the Windows 7 PC's file shares without a problem.But, the Windows 7 PC cannot login to the XP PC's file shares. Using the GUI I always get error code 0x800704b3. Using the "Net Use" command I always get "System error 67 has occurred. The network name cannot be found."This problem occurs regardless of whether I try to connect to the Windows XP PC by network name or IP address.On the Windows 7 PC I can successfully ping the Windows XP PC by both network name and IP address.
View 8 Replies View RelatedI have three laptops and a NAS in our house. I can access the NAS fine from the Win Vista computer, but not the Win XP (sp2)machine.I can ping the NAS and can access shares through the web interface, but when I try to add a network location and use 'browse' or try to type in the address directly it cannot find it. Similarly, nothing shows up under 'My Network'.I do not have a firewall on this computer and file sharing is enabled.
View 3 Replies View RelatedSo i'm trying for 4 hours to give internet to my PC with windows XP (installing windows 7 not an option) but it seems impossible, i'm getting an error that says:Limited or no connectivity, and the network it's not receiving any packages it's only sending could it be the cable?
View 9 Replies View RelatedI have a small office network of 6 computers. I have just added the 6th computer running windows 7 home premium to the network and having a few problems. We are running sage accounts system and i cant connect to the main computer that is acting as the hub which runs of windows xp to acces the sage data.The main computer is visible on the network along with all other computers on the network but i cannot connect to it. when i click on it a box appears titles 'windows security' it asks me to 'enter network password' and says below 'enter your network password to connect to cornwall-31aae0' which is the name for the hub pc.
I type in the username and password for that computer and press ok and nothing happens the box flashes and remains the same as if stuck in a continual loop. i have tried various combinations of usernames and passwords including using the computer name as a username and none work.i have played around with the settings changing workgroups and network names etc to match the hub pc and none work either. i have disabled and enabled password protected sharing etc and none of this works either. i seem to have tried everything and also tried matching the settings so that it is the same to another pc on the network running windows 7 also but still makes no difference.
When i trying sharing folder in LAN ... using different windows OS .. win Xp and Win 7 ... sharing done but giving me the option as |Enter user name and Password | i done that but this option appeared again when hit enter... (user name and password given were correct). (Sharing folder/s IN LAN as what meant by Poweruser and it is must the others would be members of poweruser for sharing purpose?)
View 1 Replies View RelatedI'm trying to network my computer that runs XP to my friends laptop that runs Windows 7. He's created a homegroup and he's turned his file sharing on but he can't see my computer and I can't see his. He also can't share his public folder, it says "folder can not be shared." I have another computer on my network that runs XP and I can see that one on my network just fine and it can see my computer.
View 1 Replies View RelatedI recently moved my computer from my home to my girl friend's house, and there is a minor problem. The laptop that has win7 already is in a homegroup. For some reason my computer(win7) does not want to connect to their homegroup. But I moved past that. Now I am trying to connect to her computer. She has Win xp. I used the same Ethernet cord from my house that I used to share internet over at her house, and I cannot seem to find out what is wrong. On the win7 it says Unidentified network-No Internet Access, and on the XP it says limited or no connectivity. I set the XP ICS to on (share) for the Ethernet port. The XP has the internet and is using a USB wireless adapter to a router. My computer is way to far from the router and neither can be moved.
Notes: I can share files, but no internet can be passed. XP = Host and Win 7 = Client
I newly installed win 7 in 2 pc's. I had used the internet connection sharing when I had Win xp installed in them before. So I gave the static IP address,192.168.0.1 to the pc with the internet connection, and had the other pc obtained the IP address automatically. File sharing works fine, but somehow the 2nd PC could not be connected to the internet. When I checked its connection details, the Autoconfiguration IPv4 Address was 169.254.224.63. I think this IP address should be something like 192.168.0.xxx, but it's configured to auto, so I can't really do anything right now
View 1 Replies View RelatedHow can I share Internet to more than one network adapter? Internet Connection Sharing can only share to one adapter at a time, and I need to do this to two.
View 3 Replies View RelatedTSG SysInfo:
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz, x86 Family 6 Model 15 Stepping 11
Processor Count: 2
RAM: 2046 Mb[code]...
I am trying to share my printer with the other 2 computers on my home network. I have the printer connected to my XP machine. The other 2 computers are running XP and Windows 7. The Windows 7 machine is directly connected to the router and my computer and the other XP computer are connected wirelessly.I've shared my printer and given it a share name. But the other 2 computers cannot access my computer for some reason.I'm not sure why they can't access my computer to see the shared printer.
so i have a printer attatched to my mom's computer and it's set up for sharing. i can get to the printer through my macbook, but it's asking for a username and password to the network (which it didn't ask me to do when setting up the sharing settings on the windows pc) what do i need to do?
View 11 Replies View RelatedI have my Windows 7 computer and my daughters computer with Windows Vista networked over a wired home LAN. For the most part, everything seems to work fine. I can access files on her computer, and she can access files from mine (photos, music, video, etc.). I set up a shortcut icons on her desktop for easy access to specific folders I am sharing on my computer. Unfortunately, when I share a folder on my computer, she is unable to view any files added after I initially shared it. So I routinely have to go in and share the folder again. It's not a huge issue, but it is annoying. The limitation seems to be one way, as I can access newly added files on her computer, without resharing.
View 2 Replies View RelatedI'm trying to network my Windows 8 media player and a samsung Smart TV... My computer is running a USB adapter for wireless, and I have just plugged in a Wireless extender. The TV doesn't last long before it losses the connection to the computer.
View 1 Replies View RelatedI am having a tough time with file/print sharing between Windows 7 and OS X 10.6. On Windows 7 I can see the Mac, but only the printers that the Mac has installed. On the Mac, it does not see the Windows machine at all in Network.
View 3 Replies View RelatedWe have a server machine running windows 7. just a few days ago, it started not being able to access its own sharing folders. From network, I can see all other computers(Xps and Window 7s). I can access other computer's sharing folders too. But when I try to access the server's own sharing folder, it gives me this error message:
"Check the spelling of the name. Otherwise, there might be a problem with your network. To try to identify and resolve network problems, click diagnose. "
I'm running Windows 7 and I want to share folders with other users on my University network. I have the sharing enabled and people within my broadcast domain (the dorms) are able to access my shares. The problem occurs when trying to access those shares from academic buildings which are in a different broadcast domain (and are part of a different VLAN).I have verified with Wireshark that the requests to access the shared media do reach the Windows 7 computer, but for some reason it doesn't respond.
View 11 Replies View Relatedwhen i am using win server2003 the file sharing is disconnected automatically.
View 2 Replies View RelatedInternet Connection Sharing. On one of my pc's with Win 7 I try to use ICS and it does not work. I have tried forcing the ip address on the LAN connection on the host computer (192.168.0.1 or something) and it will not assign an IP address to any device hooked up to it.On my macbook running Win 7 and all the settings the same, all of the same devices work fine. I tried using a cross-over cable and switch (not at the same time) with no luck. Not using any firewall and I've tried for days.
View 1 Replies View RelatedI have set up the workgroup and named each other and now i can see the file shared from my XP laptop and Windows 7 and it shows me that communicate with PC is OK.But throught the Remote I typed the computer name as mentioned on Remote and it says This computer cant connect to the Remote Computer.
I just want to remote the computer locally in the same network. when i browse for to remote PC and tried to click workgroup but the error appear as do not contain terimal servers.
I have been trying for the past 5 hours to set up a home network between my old HP Pavilion Windows XP PC, which doesn't have a wireless router, and another PC, running windows 7, on my wireless network. I want to remotely access the files on my old, slow, Big Bertha computer, which is soo terribly, horribly slow, using my new Win7 PC. But it won't let me! The XP PC is connected via ethernet cable to my Belkin Wireless-N router, and the new HP Win7 PC is connected to my wireless network via wireless signal. The computers cannot see each other or find each other on the network. I have tried- renaming the workgroup name on both PCs to be the same as the wireless network SSID, Installing some worthless "topology" update for the XP computer, which it refused to install, saying it didn't need it, Connecting the XP computer directly to the Win7 PC via ethernet cable and trying to bridge the LAN and Wireless connections on the Win7 PC and the LAN and Windows Network connections on the XP computer
View 8 Replies View RelatedI'm trying to get internet from my Windows 7 starter pack Toshiba notebooks wireless connection to my Windows XP pro 32-bit through a crossover cable. I've gotten to the point were the two comp's connect to each other successfully, but I still can't get them to share internet.
View 17 Replies View Relatedi am trying to share files/folder from a win7 system to a winXP system.Some work ok, but some say i need permissions to open (one in particular i would like is C drive from Win7..
View 8 Replies View RelatedI am trying to connect 2 windows 7 machines wirelessly but without much luck.Both machines are connected to the wireless router and have internet connection. I have created a workgroup and put files into the the public folder, but still cannot get to the files even though the computers can see one another.
View 1 Replies View Related