Unable To Reach New Printer (Epson SX620FW) Wireless
Mar 1, 2011
Recently i bought a new printer: Epson SX620FW, I've tried many things, but I can't connect it wireless to my network. Ive downloaded and installed the latest drivers and software from the internet. My PC is connected with a cable to my wireless router. When I connect the printer with a cable to my router everything works perfectly. But I want to connect my printer wireless. On the printer I disconnect the cable. I followed the wireless wizard setup on the printer and I connect to my wireless router. This is confirmed by an ip adress on the printer. Also in the menu of my router I find the ip adres of my printer in the DHCP clients list. So far so good. But from my PC I can not find the printer in my network. I also cant ping my printers ipadres. When I connect the UTP cable to my printer again, I can ping the ip of my printer.
View 2 Replies
ADVERTISEMENT
Jan 2, 2013
I recently purchased an Epson XP-205 Wi-Fi printer, and I set it up on my network and installed the drivers to my laptop, initially I could print over the network, but since a restart I can't. I have tried an uninstall and reinstall of the printer, but to no avail and if it matters, I'm running W7 64-bit.
I've ensured the printing programs are part of my firewall exclusion rules, and I can access the printers set up page via 192.168.1.3, also as expected, the printer is "pingable". On top of this my Android tablet is able to send things to the printer, so I'm sure it is an issue with my laptop.
View 1 Replies
View Related
Jan 25, 2011
I have 2 Samsung NC10's here at home that I would like to be able to print using my new Epson PX720WD wireless printer.The printer is fine when sending doc's or images from my main PC, but I suspect I need to load the same software via the CD onto these laptops? Problem with that is they don't have CD drives. Am I thinking along the right lines here? If so, is it possible to drag the info onto a memory stick, insert into laptop and off I go?
View 3 Replies
View Related
Apr 9, 2012
just bought a gateway dx4860 with wifi and a epson printer stylus nx230 wifi also. im having a problem to connect it wireless.
View 3 Replies
View Related
Mar 22, 2011
I have one of the above units which has worked fine since i first set it up over a year ago.Yesterday I tried to add an Epson sx425 WI-FI printer, I followed the instrucions and it connected ok however it started to drop the link intermitently and kept failing to print (which was also crap from my machine and total jibberish from any other!) then it lost it all together and all the other wireless devices lost their connection .The router reported it was ok with good signal strength but nothing connected so I switched it off for half an hour and rebooted but it was still the same so I tried to change the pass word but still nothing will connect. I have tried to reset the router also but this had no effect. the units plugged in via wire are working ok it is just something to do with the wirless signal.
View 26 Replies
View Related
May 21, 2012
I HAVE AN EPSON SX435W WITHOUT THE DISC. EVERY TIME I DOWNLOAD SOFTWARE. MY PRINTER SAYS IT CANNOT FIND THE PC. WHY?
View 1 Replies
View Related
Feb 27, 2012
I have a multifunctional printer epson cx8300 and have it connected to a print server TP-LINK TL-PS310U in a hope that every PCs on the network can share the printer to do printing and scanning. When I did a test to check if I can send a job to the printer, I could actually print it through the print server. However, the problem now is I can not scan a document. When I went to open windows Fax and Scanner window, unable to see any scanner there. So my question is whether this is the limitation of the epson printer itself or the print server or the scanners do not work on the network.
View 1 Replies
View Related
Apr 7, 2012
I have an Epson Stylus D88 printer connected by USB to my Windows XP desktop that is connected to my router by an ethernet cable.
I would like to print through that printer from my Win7 laptop wirelessly, but when I follow the "add printer" steps I get told; "Windows can't find a driver for EPSON Stylus D88 Series on the network. To locate one manually, click OK. Otherwise, click Cancel and consult your network administrator or the printer manufacturer's website."
View 4 Replies
View Related
Oct 21, 2012
I am trying to get my printer to be able to use it from my phone and I need the SSID and then the password and Idk them.
View 2 Replies
View Related
Dec 20, 2011
The printer, EPSON SX515W Series, is connected to the old computer, plugged in. The other laptops were not connected to the printer and would print as wireless. However now only the old computer prints directly to the printer, the other laptops fail to print it says that the laptop has the EPSON printer as it's default printer yet when ever I try to print, an exclamation mark in yellow triangle appears on the icon, in the control panel>printer section. Troubleshoot does not fix the problem either.The other problem is I can't remember how this was set up as my dad did it, and he will kill me if I don't fix it back. Also the old computer is different to the laptops. Old computer has Windows XP, and the laptops are vista.
View 3 Replies
View Related
Mar 4, 2013
I'm trying to use an EPSON WF2530 printer over wifi from my laptop Everythings fine until the printer gets turned off and on and the router assigns a new (different) IP address via DHCP.
I can run:
sudo nmap -PR -sP 192.168.1.1/24
which returns a list of MAC addresses and IP addresses on the LAN and then manually set the printer properties to the new IP address or I can log into the WiFi router and inspect the DHCP table then do the same thing What I'd really like to be able to do is have Ubuntu handle this automatically, e.g. it queries the MAC addresses on the LAN, finds the printer, extracts the current IP address and sets the printer properties appropriately? have to check the printers IP address every time I want to use it.I don't want to go down the route of having a static IP table
router is Cisco Linksys Dual-Band Wireless-N ADSL2+ Modem Router with Gigabit WAG320N
View 1 Replies
View Related
Aug 15, 2011
I have a printer (epson cx6600) I wanted to connect to our router here so everyone can print to it. It only has a usb connector (which you would typically connect to your pc)... I did notice they have usb to lan cables out there and was going to buy one and connect it to the router that way.
View 1 Replies
View Related
Mar 28, 2012
I've just reset our WISM2 in the test lab back to factory default as I needed to reconfigure the 6500 and the WISM2 itself. Bearing in mind I had it working before.I've just renamed and re-addressed some of the vlans so things flow better and make it easier to add more WISM2s in the future.Now I've run through the initial configuration and it's rebooted ok and show WISM status is showing Oper-Up and there's a port channel 407 been created as I would expect. However, I am unable to get to the management interface via GUI or SSH. In fact from the 6500 I can't even ping the management interface (but I can the service port).The Vlans have been changed in the 6500 config so it knows the native-vlan and service vlan etc and all the vlans are up/up.
View 17 Replies
View Related
Mar 12, 2013
I am facing the following problem. SmartPhone is connected WiFi hotspot. Suppose SmartPhone ip is 10.0.2.2 and hotspot ip is 10.140.13.12. I am able to send data from smartphone to a server(over internet) which has static ip and sender details in server are hotspot ip. Problem is sending data from server back to smartphone. Tried sending to 10.0.2.2(smartphone) from server but packets are not received.
View 3 Replies
View Related
May 9, 2012
I have configured a Remote access vpn on pix 525 with 7.2(4) code. After getting connected (with ip address assigned from the pool) i am not able to reach any of the internal networks. [code]
View 3 Replies
View Related
Feb 8, 2011
I have remote access vpn setup and I can get connected with no issues. I assigned the vpn a pool of addresses from the end of my inside interface subnet. When connected I can ping any device on that subnet, I can also connect to my switch on the same subnet via my browser. I can not however access any device located in my dmz while connected. This is a new setup I'm testing but I need vpn user to be able to use rdp to connect to machines in the dmz.
Result of the command: "show running-config"
: Saved
:
ASA Version 8.2(1)
!
hostname ASA1
domain-name
enable password encrypted
[code].....
View 4 Replies
View Related
Apr 3, 2011
We are facing strange issue in our network. We have a remote branch which is connected to main branch using Leased Line. Remote branch is having Cisco 1700 Router. Every day in the morning time the remote router is unreachable. We are not able to reach (ping/telnet) the remote Router but able to reach L3 switch/ LAN behind this router. The users from remote branch is also not able to reach the local router but they are able to ping the Main branch.Users in the remote branch are not able to access any resources in the main branch during the issue.
During the issue, we have checked the remote branch router and found the CPU utilization of the Cisco 1700 router is very high (99%). If we run "Show process CPU" command (please find the attachment) specially IP input process is very high (97%).
View 1 Replies
View Related
Mar 21, 2011
I have 2 desktops (running windows 7), a Canon MF8300 printer, and an outgoing ethernet line, all on a Netgear Advanced Cable Modem Gateway CGD24-CPR. I'm only concerned with having the 2 desktops set up with the Canon printer.Both computers have been connected to the printer before and I have the startup disk. But once the new offices were set up and both of the desktops were moved, I can no longer access or find the printer.
I can IPconfig the Desktops for their IPV4 addresses and both desktops recognize eachother on a Homegroup, but I can't find the printer. I printed off the print configuration page from the printer which gave me an IP address (printer is set for auto-obtain), but using an IP search won't bring up the printer.All of the devices are plugged into ethernet ports set up for the three different office they are in and the actual location of the Netgear cable modem/router is over 100 feet away. My primary concern is getting the printer for the desktops, but I also need to add a wireless router into one of those office in the future.
View 15 Replies
View Related
Apr 2, 2012
The Cisco 1921 router has two routed adapters. One is GE0/0 which I am using for my WAN interface. It is working properly. The 2nd interface is GE0/1 which is being used as my internal adapter. It is running NAT. When I attempt to reach the internet it fails while checking the exit interface. Here is the report.
AttributeValueRouter ModelCISCO1921/K9Image Namec1900-universalk9-mz.SPA.151-3.T.binIOS Version15.1(3)THostnameBulldog
Interface Details
AttributeValueInterfaceGigabitEthernet0/1IP address192.168.1.1DescriptionNOC Link Test Activity Summary
[Code].....
View 1 Replies
View Related
Jul 23, 2011
I have a sg300-10 switch. i update the firmware with the last one. Things are complicated when i create 2 VLAN. ( really 1 VLAN cause the first is native ).So i have the first VLAN with the interface 192.168.1.254 ans the VLAN 2 wich IP is 192.168.2.254
I'm connected with my workstation ( ip : 192.168.1.2/24 with GW 192.168.1.254 ) and i try to ping a web server on VLAN 2 ( ip : 192.168.2.2/24 GW 192.168.2.254 )
Ping is OK ! But when i try to reach any ports of the webserver : Nothing.
View 11 Replies
View Related
Sep 18, 2012
I have ASA 5510 and configured client VPN or Annyconnect VPN, when I connect to the ASA remotely using anyconnect I am able to get IP address as configued, from Internal network I can ping and RDP that anyconnect VPN desktop, but the problem is from the remote anyconnect VPN client I am unable to access internal network, when I use ASA packet tracer and check traffic from internal to anyconnect pool of addresses it gives result ok, but when i use packet tracer to check traffic on outside interface from anyconnect address pool to internal subnet it always gives the packet is dropped at WebVPN - SVC, and I can find any where related configuration for that.
View 5 Replies
View Related
Feb 18, 2012
I'm replacing our current router with an ASA 5510 running 8.4(3) and I'm having what I think are NAT issues.From the 192.168.0.0/24 subnet, I'm able to reach the outside world (via NAT/PAT) without any issues. However none of the internal subnets (e.g. 192.168.10.0/24) are able to. Packet-tracer shows no ACL issues.
Here's my config:
ASA Version 8.4(3)
!
hostname gw
domain-name internal.mycompany.com
enable password asdf encrypted
[code].....
View 6 Replies
View Related
Mar 2, 2012
I have a problem where I have 3845 router and c3845-advsecurityk9-mz.124-24.T5.bin dis is the IOS running on it and there's a back up BRI interface for the serial. Now if my serial link goes it normally goes to my BRI, once we had a time where the BRI was also down and when we restored back the Serial link we were still not able to reach the other side. We are using OSPF routing to reach the destination. When this happens and when we reboot this router we are able to reach the destination. sometimes we are able to reach it when we remove ospf and use static and now if we put back the ospf routing the link comes back, this happens again and again.
View 2 Replies
View Related
May 27, 2013
I have a multiple Offices in my location , all my external users are connecting my site using Cisco Client to site VPN and accessing my 2 sites , All users are able to access my 2nd office servers which are in 10.10.0.x pool , I have a different vlan in that same location with 10.10.35.x series and users are not able to access this pool servers , I am not much familiar with Routing . i am using ASA 5520 firewall .
View 11 Replies
View Related
May 10, 2012
I have 2691 router with following config
line console 0
login local
password xty
When i remove the login local from the line console i connect to console port and press enter it shows router prompt 2691Router> but i am unable to go to enable mode.If i telnet to router then i put username and pw then it goes straight to enable mode.
vty config is
line vty 0 4
exec-timeout 600 0
logging synchronous
login local
length 500
transport input telnet ssh
escape-character 3
Any reasons why i can not go to enable mode by console?
View 3 Replies
View Related
Nov 27, 2011
I am able to connect 3 computers to the network. When I enter the passkey in the HP printer, the network goes down and I need to restart it. Then computers are back on, but the printer cannot be seen. The printer driver is downloaded.
View 3 Replies
View Related
Aug 10, 2011
I have windows 7 on one client and windows xp on seconad client. the problem occure when i share hp 1320 pcl 5 printer on network..when i go to install the error shows " unable to find *.inf file".
View 4 Replies
View Related
Feb 20, 2013
Region : UnitedStates
Model : TL-WR841ND
Hardware Version : V5
Firmware Version :
ISP : charter cable
I am trying to install a HP officejet 6700 all-in-one wireless printer on my home network. I can see the MAC and static IP addresses in the ARP list but fail to connect to it via my laptop. I have disabled the Norton Internet Security smart firewall and the windows firewall and still fail to connect. I have spent 2 four hour chat sessions with HP and they tell me it is my router. They had me change the channel to 6 from 5 and 11g-only from the 11gb-mixed and it still does not connect. They also had me do a firmware upgrade but the Printer was up to date.
View 2 Replies
View Related
Dec 30, 2012
i try to connect my laptop wirelessely to my Epson printer epson 720WD , i dont exactly every thing write as it says it temporarly need a usb cable to connect wirelessely to the printer done that after that it started checking mac adress every thing ,but at the end what i get is installation failed .it says chanell conflict has been detected , how can i sort my router channel and the printer channel
View 7 Replies
View Related
Feb 9, 2013
Get "router/acess point channel conflict error and when I try Epson scan icon it tells me it cannot communicate with scanner.When I reinstalled CD, it told me the installation failed as some files necessary fo set up were missing.
View 2 Replies
View Related
Jan 28, 2011
I've set up my HP on a network with two laptop pc's. The second PC works great but the first PC will not let me print a document from a program. I get an "unable to communicate with Printer" Error. However, I can scan to both computers and the first computer can print a diagnostic page.
View 2 Replies
View Related
Mar 22, 2013
Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : latest
ISP : telecentro
I recently purchased a tl-wr842nd, my printer is a hp laserjet 1020 and it is in the compatible list as I seen. The problem is that I connect the printer in the usb routers port and the led do not light up, I tried putting my pendrive to see if the usb routers port wasn't working but it does since the pendrive is accepted and online and the usb led lights.I downloaded and installed the latest firmware but there's no change, I did everything like it saids in the faq 415 where it explains how to install and use printer server with no luck.
View 1 Replies
View Related
Sep 13, 2012
what do i need to do to be able to print from my macbook air to my epson r280. i have a wireless network set up. computer attached to the printer is a dell running windows xp home edition
View 2 Replies
View Related
