Cisco WAN :: 1700 Unable To Reach Remote Router
Apr 3, 2011
We are facing strange issue in our network. We have a remote branch which is connected to main branch using Leased Line. Remote branch is having Cisco 1700 Router. Every day in the morning time the remote router is unreachable. We are not able to reach (ping/telnet) the remote Router but able to reach L3 switch/ LAN behind this router. The users from remote branch is also not able to reach the local router but they are able to ping the Main branch.Users in the remote branch are not able to access any resources in the main branch during the issue.
During the issue, we have checked the remote branch router and found the CPU utilization of the Cisco 1700 router is very high (99%). If we run "Show process CPU" command (please find the attachment) specially IP input process is very high (97%).
View 1 Replies
ADVERTISEMENT
Apr 13, 2013
-cisco 2651xm router
-cisco 1760 router
I have a cisco 2651xm router here at home, and at another remote location I have a cisco 1760 router, both are connected to the internet via adsl (WIC1-ADSL card).The problem is that from home I can't connect to the snmp-service on the 1760 router. I'm using a PC that's on the LAN of the 2651XM router, the blockage is in the 2651XM router, because if I swap it for a cheap plastic domestic router I can get snmp data from the 1760 router, and this is without any port forwarding in the domestic router. What config do I need on the 2651XM router so it will pass this traffic?
View 3 Replies
View Related
Oct 13, 2011
I have a (central) ASA5510 acting as a EasyVPN server and a number of (remote) ASA5505 as EasyVPN client. All the communication works fine between the different networks. The issu is the ASA itself. The remote ASA can ping the central ASA on it's internal IP-adress, but it can't ping any other resoruces at the central network. If I ping the DC at the central network from the remote ASA I get a deny in the central ASA with source address as the public IP-adress of the remote ASA and destination of the internal address of the DC. If I from the remote ASA do "ping inside ip-of-central-dc" it work's like a charm, but "ping ip-of-central-dc" dosen't work.
View 3 Replies
View Related
Feb 10, 2011
I'm having some troubles with SSLVPN connectivity. I've setup SSLVPN at one site and it works great with web access, file share, RDP plugin etc. at the local LAN on that site. But I also would like to reach another site (connected with an IPSEC tunnel). Is this possible? if it is, how do I do it?Both firewalls are ASA5505, one 8.31 and one 8.22 Just a note, it works to connect with IPSEC client and reach the remote site just fine.
View 8 Replies
View Related
Mar 14, 2011
I configured a remote-access vpn on an ASA 5510 version 8.3. This is the configuration [code]The vpn goes up and I get an ip address, but it's impossible to reach the internal network. [code]
View 9 Replies
View Related
Jan 31, 2011
I have a friend that have in his company an ASA5505 at central point and about 5 remote sites connected via Vpn site-to-site.All tunnels are up and reach the central network.The only traffic that pass throw the tunnel is the traffic with the ASA local network destination.
My friend asked me what it needs to reach from one Vpn remote site to another Vpn remote site, passing throw the ASA5505 central site.The ASA5505 can reach all remote networks throw the tunnels.
What it needs for the ASA to route traffic between the VPN´s tunnels?Does it need static routes on the remote sites to advertise the other remote sites ?
View 5 Replies
View Related
Feb 11, 2012
I have 25 of these routers installed behind various providers and transport (DSL, Cable, UVerse). At sites where I have static IP, I can't reach any service inside, and in fact can't even reach the router for Remote Management. At all times the users indoes can do whtever they like, the have Internet access.
At sites where we draw a dynamic IP or use PPPoE, I can reach services and manage the router until a known issue stops the inbound traffic.
View 3 Replies
View Related
May 9, 2012
I have configured a Remote access vpn on pix 525 with 7.2(4) code. After getting connected (with ip address assigned from the pool) i am not able to reach any of the internal networks. [code]
View 3 Replies
View Related
Feb 8, 2011
I have remote access vpn setup and I can get connected with no issues. I assigned the vpn a pool of addresses from the end of my inside interface subnet. When connected I can ping any device on that subnet, I can also connect to my switch on the same subnet via my browser. I can not however access any device located in my dmz while connected. This is a new setup I'm testing but I need vpn user to be able to use rdp to connect to machines in the dmz.
Result of the command: "show running-config"
: Saved
:
ASA Version 8.2(1)
!
hostname ASA1
domain-name
enable password encrypted
[code].....
View 4 Replies
View Related
Mar 12, 2013
I am facing the following problem. SmartPhone is connected WiFi hotspot. Suppose SmartPhone ip is 10.0.2.2 and hotspot ip is 10.140.13.12. I am able to send data from smartphone to a server(over internet) which has static ip and sender details in server are hotspot ip. Problem is sending data from server back to smartphone. Tried sending to 10.0.2.2(smartphone) from server but packets are not received.
View 3 Replies
View Related
Apr 2, 2012
The Cisco 1921 router has two routed adapters. One is GE0/0 which I am using for my WAN interface. It is working properly. The 2nd interface is GE0/1 which is being used as my internal adapter. It is running NAT. When I attempt to reach the internet it fails while checking the exit interface. Here is the report.
AttributeValueRouter ModelCISCO1921/K9Image Namec1900-universalk9-mz.SPA.151-3.T.binIOS Version15.1(3)THostnameBulldog
Interface Details
AttributeValueInterfaceGigabitEthernet0/1IP address192.168.1.1DescriptionNOC Link Test Activity Summary
[Code].....
View 1 Replies
View Related
Jul 23, 2011
I have a sg300-10 switch. i update the firmware with the last one. Things are complicated when i create 2 VLAN. ( really 1 VLAN cause the first is native ).So i have the first VLAN with the interface 192.168.1.254 ans the VLAN 2 wich IP is 192.168.2.254
I'm connected with my workstation ( ip : 192.168.1.2/24 with GW 192.168.1.254 ) and i try to ping a web server on VLAN 2 ( ip : 192.168.2.2/24 GW 192.168.2.254 )
Ping is OK ! But when i try to reach any ports of the webserver : Nothing.
View 11 Replies
View Related
Sep 18, 2012
I have ASA 5510 and configured client VPN or Annyconnect VPN, when I connect to the ASA remotely using anyconnect I am able to get IP address as configued, from Internal network I can ping and RDP that anyconnect VPN desktop, but the problem is from the remote anyconnect VPN client I am unable to access internal network, when I use ASA packet tracer and check traffic from internal to anyconnect pool of addresses it gives result ok, but when i use packet tracer to check traffic on outside interface from anyconnect address pool to internal subnet it always gives the packet is dropped at WebVPN - SVC, and I can find any where related configuration for that.
View 5 Replies
View Related
Feb 18, 2012
I'm replacing our current router with an ASA 5510 running 8.4(3) and I'm having what I think are NAT issues.From the 192.168.0.0/24 subnet, I'm able to reach the outside world (via NAT/PAT) without any issues. However none of the internal subnets (e.g. 192.168.10.0/24) are able to. Packet-tracer shows no ACL issues.
Here's my config:
ASA Version 8.4(3)
!
hostname gw
domain-name internal.mycompany.com
enable password asdf encrypted
[code].....
View 6 Replies
View Related
Mar 2, 2012
I have a problem where I have 3845 router and c3845-advsecurityk9-mz.124-24.T5.bin dis is the IOS running on it and there's a back up BRI interface for the serial. Now if my serial link goes it normally goes to my BRI, once we had a time where the BRI was also down and when we restored back the Serial link we were still not able to reach the other side. We are using OSPF routing to reach the destination. When this happens and when we reboot this router we are able to reach the destination. sometimes we are able to reach it when we remove ospf and use static and now if we put back the ospf routing the link comes back, this happens again and again.
View 2 Replies
View Related
Mar 1, 2011
Recently i bought a new printer: Epson SX620FW, I've tried many things, but I can't connect it wireless to my network. Ive downloaded and installed the latest drivers and software from the internet. My PC is connected with a cable to my wireless router. When I connect the printer with a cable to my router everything works perfectly. But I want to connect my printer wireless. On the printer I disconnect the cable. I followed the wireless wizard setup on the printer and I connect to my wireless router. This is confirmed by an ip adress on the printer. Also in the menu of my router I find the ip adres of my printer in the DHCP clients list. So far so good. But from my PC I can not find the printer in my network. I also cant ping my printers ipadres. When I connect the UTP cable to my printer again, I can ping the ip of my printer.
View 2 Replies
View Related
Mar 28, 2012
I've just reset our WISM2 in the test lab back to factory default as I needed to reconfigure the 6500 and the WISM2 itself. Bearing in mind I had it working before.I've just renamed and re-addressed some of the vlans so things flow better and make it easier to add more WISM2s in the future.Now I've run through the initial configuration and it's rebooted ok and show WISM status is showing Oper-Up and there's a port channel 407 been created as I would expect. However, I am unable to get to the management interface via GUI or SSH. In fact from the 6500 I can't even ping the management interface (but I can the service port).The Vlans have been changed in the 6500 config so it knows the native-vlan and service vlan etc and all the vlans are up/up.
View 17 Replies
View Related
Feb 28, 2012
We currently have 1 T1 coming into a 1700 series router for our internet traffic. We are looking to add 2 more T1's to this and was curious what would be a recomended router for this. Our provider is trying to sell us an adtran for $4200 which can handle 4 T1's.
View 4 Replies
View Related
May 27, 2013
I have a multiple Offices in my location , all my external users are connecting my site using Cisco Client to site VPN and accessing my 2 sites , All users are able to access my 2nd office servers which are in 10.10.0.x pool , I have a different vlan in that same location with 10.10.35.x series and users are not able to access this pool servers , I am not much familiar with Routing . i am using ASA 5520 firewall .
View 11 Replies
View Related
May 21, 2011
Remote-access users aren't able to reach our remote network through a site-to-site VPN tunnel between two ASA 5505's.
I've seen several threads about that here, I've run through the walkthrough at [URL] I've taken a stab at setting split tunnelling and nat exemption, but it seems I'm still missing something. Remote-access users can reach the main site, but not the remote site.
Remote-access (vpn-houston) uses 192.168.69.0/24.
The main site (houston) uses 10.0.0.0/24
The remote site (lugoff) uses 10.0.1.0/24
View 5 Replies
View Related
May 10, 2012
I have 2691 router with following config
line console 0
login local
password xty
When i remove the login local from the line console i connect to console port and press enter it shows router prompt 2691Router> but i am unable to go to enable mode.If i telnet to router then i put username and pw then it goes straight to enable mode.
vty config is
line vty 0 4
exec-timeout 600 0
logging synchronous
login local
length 500
transport input telnet ssh
escape-character 3
Any reasons why i can not go to enable mode by console?
View 3 Replies
View Related
Feb 11, 2011
I have a Cisco 1700 series router (i dont know exact series number) running:
ROM: System Bootstrap, Version 12.2(7r)XM4, RELEASE SOFTWARE (fc1)
ROM: Cisco IOS Software, C1700 Software (C1700-K9O3SY7-M), Version 12.3(7)XR3, RELEASE SOFTWARE (fc2)
installed is a WIC-4ESW card.
This should be simple, cant get it working. in a nutshell... I'm trying to configure fa0 as a vlan "trunk" port trunking vlans 1 and 20 from my managed switch (switch is configured correctly) and i want fa1 on vlan 1 and fa2 on vlan 20.
another words:
fa0 tagged with vlan 1 & 20
fa1 untagged with vlan 1
fa2 untagged with vlan 20
Code:
! Last configuration change at 20:35:48 EST Sat Feb 12 2011
! NVRAM config last updated at 20:47:38 EST Sat Feb 12 2011
version 12.3
[Code] .....
View 15 Replies
View Related
Aug 25, 2012
I'm trying to configure 1700 K9 router to act as PPTP client and connect to Microsoft VPN server (in order to enable all clients on LAN to seamlessly access host on remote location). [URL]
I'm using GMS3 to test everything in lab environment. I managed to connect to Microsoft VPN server but the connection drops immediately. Below is debug info from router R1 (router R2 just simulates host on LAN) and configurations for both routers. The only clue I got from debug is that immediately before closing connection there's a message "CCP: Failed to negotiate with peer"...
R1#sh debug
PPP:
PPP detailed event debugging is on
MPPE Packet Details debugging is on
[Code].....
View 2 Replies
View Related
Apr 7, 2011
i got a big problem, during a configuration reset i got an electrical blackout. I have set the configuration back after a password reset and send the reset prompt. At the restart of the router the blackout take all for 10 seconds out. When i restart the system an connect the router with the hyper terminal i get the following output:
[Code].....
I think the config was lost but how can i restart the router and enter a new one?
View 2 Replies
View Related
Jan 23, 2012
We currently have a main network running through a static broadband connecting using a Cisco 1700 ADSL router, everything is working fine locally.
We are looking to rent some space in an office nearby so im going to order another business adsl connection with static IP for this site and i currently have a spare 1800 router.My question is can the cisco routers connect up like a VPN connection so both sites work together and will the connection remain online constantly so from the remote office we can access all our servers from the main network?
Also how does the IP addressing work on 2 sites. The main network uses 10.120.21.x and DHCP is assigned from a cisco router. Does the remote network assign from the same DHCP server or would the remote sites cisco router need to be setup to give out DHCP to local machines. If so what would be the best IP setup to use.
View 9 Replies
View Related
Jul 15, 2012
I have a sky router (Netgear DG834GT), which i have connected a secound router to which is a D link DIR-615 (with DD wrt firmware D4).I can get access to the sky router remotely without any issues even when changing the port number. its the Dlink router i cannot get access to remotely (within the network i can by typing in the dlink's ip address and works). Main router Sky router IP is 192.168.0.1 - Currently the port number is 8081.Secondary router Dlink IP is 192.168.0.2 (Static ip) - currently the port number is 8080.I have tried to configure the ports but it just dont want to open. Ive tried to open the ports on main netgear and tried all the option my dlink for port forwarding. i must be missing something fundametal here.
View 2 Replies
View Related
Apr 30, 2013
I am being told from my remote end I do not have port 22 opened up. I have single port forwarding to SSH 22 and Port Range 22 enabled.
View 1 Replies
View Related
Nov 20, 2011
My University has free Internet at student homes, but we need to login by PPTP to get an official, public IPv4 and be able to reach the outside world. The network people at the University says that when the PPTP is up, everything should be open (no firewall of any kind).
have my WRT160NL that gets a 10.10.73.0/23 address from DHCP on WAN port. Currently I have 10.10.74.21. My internal network uses 172.17.17.0/24.My PPTP-server is located at 10.192.1.1 and when I connect, I usually get an IP in the 158.37.73.0/24-range. Currently I have 158.37.73.28. I use DynDNS to make sure I always know the public IP by the host binders.dyndns.info ...
So, I have Remote management enabled with HTTP and HTTPS, any IP and default port 8080. But no response from the outside world seems to go through.If I turn of the "filter ICMP" but keep the SPI Firewall on, I get ping reply from external sources towards my router, but still no HTTP or HTTPS response.I also have a Torrent I try to port forward to to be active, this is 23277, and this is the only thing that keeps coming up in the incoming log on my router.
It's not possible to connect to the routers management over the PPTP-tunnel?And why can't I get the port forward to work .. Same reason? PPTP 158.37.73.28 -> 172.17.17.100 (LAN) won't work?
View 1 Replies
View Related
May 30, 2012
I am just setting up a simple scenario with a 1841. Server @ 172.31.1.1 cannot ping 172.31.0.254 or 172.31.0.105. It can ping 172.31.1.250. The router can, on the other hand, ping devices on both networks. This is just for testing routing theory so I don't know why hosts on either side of the network cannot ping each other.
I am only using the FastEthernet interfaces on Router 1841.
View 3 Replies
View Related
Jan 17, 2011
I have not done much with business routers, but we have a 1700 series with a WAN WIC-1ENET card with a RJ45 connection. We had a T1 line and will be moving to ehternet. We are going to be moving to a 20MB line, and i just wanted to make sure I have the right connections before installing. We also have a T1 line in another loaton and would be moving to this same 2811 router there as well.We would also like to copy over the configuration from 1700 series router to the 2811 router. Would it be easier to do it by hyper-terminal? Also if we keep the 1700 routers are they capable of using layer-3?
View 2 Replies
View Related
Feb 26, 2012
I was looking for a way to connect an AUX port from a 1700 router to a 6500 switch module console port, to see the output of the Switch's on the 1700 router, in case there is a network downtime, I could see what's going on in the switch, what cable should I use ? Also, is there is any kind of documentation for this type of config what have I seen is very few info.
View 2 Replies
View Related
Dec 19, 2010
I have two sites with a dedicated, point to point, LAN, site 1 has a Cisco 1700, LAN IP: 192.168.0.101; Site 2 has a Cisco 1800, LAN IP: 192.168.1.101.From site 2 I can ping the router on the other side: 192.168.0.101, but nothing else on that network
From Site 1 I can't ping the other network at all,Both sites ping fine to their respective local interfaces. I also noticed, when trying to ping site 2 from 1, the "WIC ACT/CH" light blinks, otherwise it's off.
Site 1 has it's own web connection through COMCAST, site 2 is set to route through site's 1 connection to go out. The only thing the routers are doing are the actual connection between sites, and in the case of site 2, routing web traffic to 192.168.0.100, which is a Sonicwall on Site 1.
This was all working just fine, for a long time, up until yesterday, when the problem I described started happening.
View 1 Replies
View Related
Oct 1, 2011
The wan routers are 2600 and 1700. Conversions between the two? Pros/Cons of one versus the other? Regrets or horror stories for one versus the other?
View 3 Replies
View Related
