Cisco Wireless :: Epson PowerLite 1761W / Finding Projector In Network?
Apr 22, 2013
We have finding the projector in the network. When we connected a Epson projector and a laptop in different access points in wireless, we can found the projector in the network. But when we connected them in same access points in wireless, we can't found the projector. We need to find the solution of it. We are using Epson PowerLite 1761W projector and the access point is WAP4410N with firmware version 2.0.6.1.
View 1 Replies
ADVERTISEMENT
Apr 15, 2011
I have Access Point and Wireless Projector,cannot connect to both! i want Internet when i'm connected at Wireless Projector,without Connect RJ45 in wireless projector
View 1 Replies
View Related
Feb 13, 2013
I am trying to hook up a wireless projector and connect an old audio mixer to my Laptop wireless and in sync so that I can operate the projector video and audio from my laptop anywhere in the room. I have a 30' by 60' sanctuary in my church an old audio mixer hooked up to key board, mics and speakers and one cordless mic. I am considering purchasing a Epson Powerlite 96W Projector and the optional wireless LAN module but wondered if there was a way to hook up a Epson EX7210 projector wireless as it does not accept the optional wireless LAN module. Also we currently have a great singer and no musicians so I am trying to find church presentation software that would include lyrics, background effects and music to accompany our singer.
View 1 Replies
View Related
Dec 20, 2011
The printer, EPSON SX515W Series, is connected to the old computer, plugged in. The other laptops were not connected to the printer and would print as wireless. However now only the old computer prints directly to the printer, the other laptops fail to print it says that the laptop has the EPSON printer as it's default printer yet when ever I try to print, an exclamation mark in yellow triangle appears on the icon, in the control panel>printer section. Troubleshoot does not fix the problem either.The other problem is I can't remember how this was set up as my dad did it, and he will kill me if I don't fix it back. Also the old computer is different to the laptops. Old computer has Windows XP, and the laptops are vista.
View 3 Replies
View Related
Mar 12, 2011
where do i find my security key for my wireless setup
View 2 Replies
View Related
May 21, 2011
need to find SSID from my network security key and mac address filter - active/disable DHCP. trying to connect EPSON WF610 WiFi to my imac in a home network?
View 2 Replies
View Related
Mar 4, 2013
I'm trying to use an EPSON WF2530 printer over wifi from my laptop Everythings fine until the printer gets turned off and on and the router assigns a new (different) IP address via DHCP.
I can run:
sudo nmap -PR -sP 192.168.1.1/24
which returns a list of MAC addresses and IP addresses on the LAN and then manually set the printer properties to the new IP address or I can log into the WiFi router and inspect the DHCP table then do the same thing What I'd really like to be able to do is have Ubuntu handle this automatically, e.g. it queries the MAC addresses on the LAN, finds the printer, extracts the current IP address and sets the printer properties appropriately? have to check the printers IP address every time I want to use it.I don't want to go down the route of having a static IP table
router is Cisco Linksys Dual-Band Wireless-N ADSL2+ Modem Router with Gigabit WAG320N
View 1 Replies
View Related
Dec 28, 2011
Three weeks ago I moved all the APs at one of our sites from WISMs (running 5.2.193) over to a pair of 5508s (running 7.0.220) and everything appeared to be fine through testing and implementation. We've got about 400 devices on this network and almost everything is working without issue, except for about 10 Honeywell Dolphin hand-held scanners that our distribution department uses. On occasion when the users go to use them, even when sitting 15 feet from an AP, the device will kick out an error that the "wireless network was not found - please move closer to an access point or return to cradle".
As much as I would love to say it's a device issue, they said the problem started the same day I moved the APs to the new controllers (they gave me the date they started experiencing the issue, I was able to link that back to the date I made the move). They worked without issue on the old controllers / code and, for the most part, both old and new controllers are configured similarly (except for enabling a few new feature that the new code supports like client-link and band-select). These are b/g clients and I did diable all .11b data rates when moving to the new controller. Also, this happens in multiple locations, not just in the receiving / distribution area.
Lastly, I'm at my wit's end on this. The issue is totally random and when they are having an issue I can't even see the device trying to connect (by debugging the client on the controller). One suggestion I've made is that we may need to upgrade the device firmware, but I'm not sure why it would work with the old controllers and not the new. I guess the worst case scenario is that I can move the couple APs they have in the receiving area back to the old controllers to see if the issue continues.
View 10 Replies
View Related
Apr 1, 2012
laptop not finding any wireless network Suddenly....and the hardware(dell wireless 1702 802.11b/g/n) not recognized suddenly it was working then start to lose signal sometimes then stopped ....i removed the driver software and re-install but nothing changed.
View 4 Replies
View Related
Nov 28, 2011
How can i create a local projector at home
View 1 Replies
View Related
Feb 16, 2012
im trying to use my dell inspiron 1012 to project onto another, bigger screen laptop. im usng vga cable, which poth laptops have vga.... but i cant seem to connect them. i can do it fine with my tv, but i cant find a way of projecting onto another laptop.
View 5 Replies
View Related
Dec 30, 2012
i try to connect my laptop wirelessely to my Epson printer epson 720WD , i dont exactly every thing write as it says it temporarly need a usb cable to connect wirelessely to the printer done that after that it started checking mac adress every thing ,but at the end what i get is installation failed .it says chanell conflict has been detected , how can i sort my router channel and the printer channel
View 7 Replies
View Related
Feb 9, 2013
Get "router/acess point channel conflict error and when I try Epson scan icon it tells me it cannot communicate with scanner.When I reinstalled CD, it told me the installation failed as some files necessary fo set up were missing.
View 2 Replies
View Related
Jan 2, 2013
I recently purchased an Epson XP-205 Wi-Fi printer, and I set it up on my network and installed the drivers to my laptop, initially I could print over the network, but since a restart I can't. I have tried an uninstall and reinstall of the printer, but to no avail and if it matters, I'm running W7 64-bit.
I've ensured the printing programs are part of my firewall exclusion rules, and I can access the printers set up page via 192.168.1.3, also as expected, the printer is "pingable". On top of this my Android tablet is able to send things to the printer, so I'm sure it is an issue with my laptop.
View 1 Replies
View Related
Sep 13, 2012
what do i need to do to be able to print from my macbook air to my epson r280. i have a wireless network set up. computer attached to the printer is a dell running windows xp home edition
View 2 Replies
View Related
Aug 10, 2011
I have got my WRVS4400 setup and i can VPN into the network. Once in i cannot access any of the computers inside the network. I can log into the router and see that they are connected but I cannot find them in my windows network.
View 1 Replies
View Related
Oct 1, 2011
I am doing a security course and I need to find out the IP addresses of the devices on my network in order to carry out a ping of death on one of my devices. I've done the ipconfig command but that doesn't give me the information I need.
View 5 Replies
View Related
May 26, 2012
How to find my network security key on my computer?
View 1 Replies
View Related
Mar 1, 2011
Recently i bought a new printer: Epson SX620FW, I've tried many things, but I can't connect it wireless to my network. Ive downloaded and installed the latest drivers and software from the internet. My PC is connected with a cable to my wireless router. When I connect the printer with a cable to my router everything works perfectly. But I want to connect my printer wireless. On the printer I disconnect the cable. I followed the wireless wizard setup on the printer and I connect to my wireless router. This is confirmed by an ip adress on the printer. Also in the menu of my router I find the ip adres of my printer in the DHCP clients list. So far so good. But from my PC I can not find the printer in my network. I also cant ping my printers ipadres. When I connect the UTP cable to my printer again, I can ping the ip of my printer.
View 2 Replies
View Related
Aug 16, 2011
Want some input on what will be the best solution in this scenario.Basicly this is a small ISP network.In each area, behind the C3750s, there are som DSLAMs, access switches and wireless base stations.Some of the clients need L2 connections across the network, as they have several offices.The C3750s are all Cisco WS-C3750G-12S-E.The management networks must be isolated, but be able to reach each other.What do you think would be the best solution realising this network, based on the awailable hardware?
View 1 Replies
View Related
Dec 20, 2012
i have not needed my wi-fi pasword for 3yers. I cannot remember or find it. The isp is Orange (EE). I do know the wi-fi name.
View 2 Replies
View Related
Jan 25, 2011
I have 2 Samsung NC10's here at home that I would like to be able to print using my new Epson PX720WD wireless printer.The printer is fine when sending doc's or images from my main PC, but I suspect I need to load the same software via the CD onto these laptops? Problem with that is they don't have CD drives. Am I thinking along the right lines here? If so, is it possible to drag the info onto a memory stick, insert into laptop and off I go?
View 3 Replies
View Related
Feb 16, 2010
I can't get my Epson Workforce 615 (610 series) All in One Printer to connect to my WRT54G router. I was on the phone with Epson for over an hour and renetered my SSID and security code 4 times. They said it was something about the router not letting it connect. The printer sees the SSID and I put my laptop in the same location as the printer and it has very good signal strength. I even took the printer back and got another one. The router does not have MAC filtering enabled.
View 5 Replies
View Related
Dec 6, 2011
I can't connect my Epson Stylus SX130 printer/scanner via the USB port on the Linksys E4200. It all ends up with cisco referring me to this website. I re-installed the printer/scanner, but it didn't work. The Stylus SX130 works fine when I connect it directly to my computer.
View 6 Replies
View Related
Apr 9, 2012
just bought a gateway dx4860 with wifi and a epson printer stylus nx230 wifi also. im having a problem to connect it wireless.
View 3 Replies
View Related
Mar 19, 2011
I'm looking for Ethernet Controller and Network Controller for Toshiba Satellite L655D-S5164 running on Windows 7 32bit and 64bit on two different laptops.Also, i tried to downgrade to Windows XP and every time the cd boots it gives me blue screen of death.
View 1 Replies
View Related
Mar 25, 2005
I can't find the driver for the Network Controller on a Inspiron 1150, I just did a clean installation of WinXP, I used the Dell CD-ROM that came with the piece... I searched every CD that came with the darn thing and I still cant find the driver I need... In the device manager the " Network Controller ", has a question mark by it meaning it doesnt have the driver installed
View 5 Replies
View Related
Mar 22, 2011
I have one of the above units which has worked fine since i first set it up over a year ago.Yesterday I tried to add an Epson sx425 WI-FI printer, I followed the instrucions and it connected ok however it started to drop the link intermitently and kept failing to print (which was also crap from my machine and total jibberish from any other!) then it lost it all together and all the other wireless devices lost their connection .The router reported it was ok with good signal strength but nothing connected so I switched it off for half an hour and rebooted but it was still the same so I tried to change the pass word but still nothing will connect. I have tried to reset the router also but this had no effect. the units plugged in via wire are working ok it is just something to do with the wirless signal.
View 26 Replies
View Related
Jul 17, 2011
I have a hobby network at home, the structure of which follows:*Modem * - active SPI firewall -- Then the E4200 distributes data via wifi to/between the following machines --*Server - providing services such as http, FTP, VPN, Mail, MySQL, OpenDirectory, Plex media server, etc.*Two other workstations that access their user details/settings from open directory on the server.Now the purpose of this network other than providing standard access to Internet services from within the LAN is to provide access to the services maintained on my server to users on my LAN when they leave it/go mobile.Now with my limited knowledge of networking I have been using port forwarding to direct service requests through the firewall, however I have found with the E4200 that I have a limited number of custom port fields to use (about 15) which is extremely limiting when I have as many potential services that my server can provide.I could move the Server to a DMZ but then dosen't that put all my other services that have no need to be exposed at unnecessary risk.Do I need to invest in a separate hardware firewall and put it after the modem and before the router?
View 1 Replies
View Related
Nov 12, 2011
Win 7 computer wired into D-Link 615 router (address of 192.168.1.1).Set win 7 computer static address at 192.168.0.100. Then set Epson wireless at 192.168.0.103.DCHP IP address range 192.168.0.105 to 192.168.0.199.Computer finds printer and everything works fine for about a week. Then computer can no longer ping the printer.
View 2 Replies
View Related
Dec 25, 2012
What is the ip address for my epson xp-300
View 1 Replies
View Related
Apr 9, 2012
I am trying to an Epson WF 545 to connect to a wireless network. I get an error message when it fails to connect to a networked iMac. The message says, "Entered security key/password does not match the one set for your router/access point."Several weeks ago, I had to reset my wireless network password/security key. That reset worked for our 3 PCs and 2 Macs including this iMac...the one that now doesn't connect to the wireless printer or maybe vice versa...why the iMac can't connect to the Epson (or vice versa), but the iMac does connect to the wireless network, and in order to do that, it makes use of the new network password / security key that I just put in the Epson to set it up in the network. Can you tell me if the wireless router somehow has a password / security key that I did not change when I changed the wireless network security key? The new network password/security key that I entered in the Epson is correct.
View 9 Replies
View Related
Feb 6, 2012
I have a laptop (Windows XP 32bit) and a new desktop Windows 7). The Epson rx595 is connected to the desktop. A network has been created and I can share files, but the laptop will not recognize the printer
View 2 Replies
View Related
