Implement the procedures required so that machine 1 and machine 2 can communicate statically with one another. Outline the TCP/IP settings to be used on each of the machines and set this machine up accordingly.
I followed this guide [TUT] Setting a static internal IP (Windows and Linux)but what has happened is that now the two machines can't connect to the internet.
Implement the procedures required so that machine 1 and machine 2 can communicate statically with one another. Outline the TCP/IP settings to be used on each of the machines and set this machine up accordingly. I followed this guide http:[URL]....tid=210 but what has happened is that now the two machines can't connect to the internet. How can I fix this?
Here is a links to the ipconfig/ all on the XP virtual machine http:[URL]....the default gate way here is the same as on my actual working machine.
We are experimenting with virtual machines running on some laptops here as part of a future deployment.Equipment in use:
-5508 WLC
-1262 LWAP
The actual operating system has no issues connecting to the wireless. When you start the virtual machine on any client machine (OSX, Win 7, Win XP, anything) it is unable to get an IP through an external DHCP server when the VM is set up to use a bridged connection.This works fine with Autonomous access points and over cable all mapped to the same VLAN. Helper addresses are configured on the VLAN.Is this a limitation of the WLC where it cannot provide more than one IP address per MAC? Is it a limitation of CAPWAP? Or is there an option to turn of DHCP snooping (which I suspect to be the cause of the issue)?
I have a single physical machine A (Windows XP). On A, I have 3 virtual machines (A1,A2,A3) If a want to communicate with port 4444 on virtual machine A1, can communicate to the same port 4444 on machine A2, All the VMs below exist on the same physical machine.
View 3 Replies View RelatedImplement the procedures required so that machine 1 and machine 2 can communicate statically with one another. Outline the TCP/IP settings to be used on each of the machines and set this machine up accordingly.
View 4 Replies View RelatedI have installed 4 virtual machines using virtualbox on a windows 7 host and i'm searching how i could connect them so as they can communicate each other.
View 2 Replies View RelatedI recently acquired a 2509 router that I plan to use as a serial device router. My question is, how do you create the virtual com ports on Windows and Linux machines to point to the TCP address:ports in the 2509 router? Is there software or drivers that do this? Or something third-party?
View 12 Replies View RelatedI recently added two Win7 computers to my ethernet network (one replaced an older computer, the other has brought the total to 4 machines). The original 2 workstations (XPpro) are fine, but the 2 new Win7 computers intermittently lose internet connection. They remain on the network, just lose internet. The 2 that are having the problem are wired directly to the first router, Linksys WRT160N. The 2 XP computers, that work perfectly, are wired 150 feet away, attached to a Linksys WRT54G used as an access point.The problem is much more severe on one of the new machines, with Win7 Home Deluxe - it stays offline about half of the time. The other, Win7 Pro, is occasionally waxed for 5 or ten minutes. Both use the Win7 default firewall & settings, I've added Avast free anti-virus but no additional firewall software. I have not noted any error messages other than the red X on the networking diagram, and the browser can't find page
View 2 Replies View RelatedRunning a Windows 7 laptop plugged into a LAN using ethernet cable with internet.The built-in wireless nic on the laptop connects to a totally different internet network. I set up an XP Mode Virtual PC on the laptop with the intention that it would use the wireless internet connection.I set this up by installing Microsoft Loopback Adapter, then sharing the wireless nic to it. The Virtual PC is set to use the Microsoft Loopback Adapter as its network connection.My problem is that only the hard wired internet connection works.The wireless is connected and has an ip address, however no traffic flows through it until i either disable the cabled network or physcially unplug the cable. Is it possible to have my host laptop use the cabled internet connection and my virtual pc use the 2nd wireless internet?
View 1 Replies View RelatedI installed virtual pc 2007 that has winXP and my host is Windows vista. I was able to make my virtual pc to connect to host internet using NAT for adapter 1 long time ago without any problems but it is not working anymore since last month! Although it works when I try it on another host. I believe the problem is in my host so what to check excatly in my host.
View 1 Replies View RelatedSo I'm trying to set up my computer to act as a virtual router so I can connect another device to the network.I can successfully create the network but it doesn't seem to be sharing my internet. I believe the problem may be that on the sharing tab for the initial internet connection there is no drop down menu like the one below.
View 5 Replies View RelatedWhen I try to connect to the internet I get IE cannot dislay the webpage. All connections show that they are working fine. I did the repair option for my LAN, it states that it is working & shows that it's connected.I tried to sign into MSN & got no connection. I ran the repair option & got a DNS & Keyports warnings.I am running Windows XP on my home computer
View 2 Replies View RelatedMy computer is part of domain.I have one LAN connection. IP address 172.100.40.70 ,subnet Mask 255.255.255.0, Default Gate Way 172.100.40.1Another is one internet connection through bluetooth PAN IP address 192.168.0.103, subnet Mask 255.255.255.0, Default Gate Way 192.168.0.1.Problem is when I connect to LAN, internet connection is lost. If I take out LAN cable or disable LAN, I get the internet connection. I want to keep both LAN connection and bluetooth PAN internet connection.I must keep LAN IP address without changing.
View 6 Replies View RelatedI was trying to browse the internet earlier, and I randomly just lost my internet connection. My homepage loaded up just fine, but then I tried to go to another site. It was taking a while to load. After about a minute a page finally came up that said "Server not found" (I use firefox). I can't get on any websites now and I can't get internet on any of my wireless devices either. When I right clicked my network icon on the toolbar and clicked on diagnose and repair it said "There may be a problem with the DNS. Windows attempted to find the well known host www.microsoft.com using dns. The server responded that the name was unknown." I have Windows Vista. Now I have no idea what I could have done. I didn't do anything out of the normal, just tried to go to a website that I frequently visit with no problems and this happened. This is what I get when I type ipconfig/all in cmd prompt. [code]
View 14 Replies View RelatedI dont have an internet connection through my computer. This one tells me error 106. I have 3 computers hooked through the same router. So, I know I have internet, as I am writing this now. But for some reason, that computer is now telling me I lost the internet connection. I have tried unplugging everything, restarting the computer, and nothing has worked. I dont know how to get the internet back on that computer.
View 2 Replies View RelatedWhenever I restart or boot my computer, it loses internet connection (Local Area Connection Unplugged). I need to unplug the cable connecting my pc to the modem and replug it until the green and orange light comes on on the area where I plug the cble to the pc w/c means that there is already internet connectionSystem:Win XP sp3 OSGigabyte S-series motherboard ma74gm-s2Amd Athlon X3 processorMotorola SURFboard SB5101U/SB5101N Cable modem
View 8 Replies View RelatedI have just turned my PC on to find that i have lost connection to the internet through my desktop PC. I am using the wired connection to my router, and i also have my xbox connected to the router which is working ok too. My laptop also works when connecting to the router both wired and wirelesly.
My network adaptor on my desktop is a Nvidia nForce, i have tried updating the driver on this to no avail. Next i tried to ping the router but i get PING Transmit faild, error code 1231. I ran IPCONFIG /all and found that i had no default gateway set, and also it was saying that the ethernet adaptor was : Media Unoperational, but since i rebooted both the pc and router the media unoperational tag has gone.
On the network and sharing page it shows i am connected to an unidenfied network but there is a cross through the internet. It also says the access and Connection for the unitentified network are Local only.
I no longer have internet access from my home network ONLY on my desktop computer. Everything was working fine as always - then while I was in my Network and Sharing Center, and clicked on my ethernet connection, 'Local Area Connection 3', I accidentally disabled it. No big deal I thought, so I re-enabled the connection. Except for some reason, my connection is all screwed up now. The name of this connection was and always has been 'dkm2' and now it just says 'Network', with no internet access. I have unplugged the cord and plugged it into this laptop and it immediately recognizes 'dkm2' and connects flawlessly, so I know the problem is on the desktop computer's end, and not the cable or router. I have tried reinstalling the ethernet adapter, as well as reinstalling/updating all drivers for it.The network diagnostic tool turns up with a message that says the connection between either my ethernet adapter or router and the Internet is broken. No matter what I seem to try, I can't get my connection to go back to it's normal 'dkm2' connection and stop giving me a generic, disconnected 'Network'. I can't figure out what could have changed. All that happened was the disabling and enabling of Local Area Connection 3.
View 9 Replies View RelatedAt power on and off on my laptop, the wireless internet connection is lost on windows 7.
View 1 Replies View Relatedthe modem is open.the router also is open but dont have internet access.
View 1 Replies View RelatedI have lost my wireless connection on my acer notebook... where is the button/switch etc to give me the blue flashing light to demonstrate connection to my wireless internet?
View 3 Replies View RelatedI have PC System Windows XP home edition Version 2002 SP3 and I lost Internet access in the middle of downloading a new program. I have a Motorola modem and modem is connected to the Netgear router. When I turn my desktop PC on which is connected to the router it shows the local connection is connected, but the Bridge Network cable is unplugged I have no idea what that is and if I need it to be connected to the internet. I called the Comcast service and the lady assistant did not even know what the Bridge cable is and I do not know ether since. I do not know what I should do to get the connection back to the PC; another PC work just fine also is connected to the router.
View 1 Replies View RelatedWe've had no problems with our Internet before but yesterday I could only get local access connection. Neither my iPhone, laptop or home computer cud get any further than local connection on wireless.I'v tried the classic turnin it off and on (the router) and I'v tried connection with a cable but still gettin the same connection level! The router is a netgear if that means anything!
View 1 Replies View RelatedYesterday we had a very brief power outage and until then everything worked fine. Small business that runs modem - router - switch. Since the power outage I can only get internet if I run straight into the modem. As soon as I run from the modem to any (tried 3 different ones) router I lose internet. I get a wireless signal on my router. I've reset the router to default settings. I've plugged in another router to the modem to check and I don't get anything from that router either (which was not plugged in during the power outage).
View 1 Replies View RelatedI have an HP EliteBook 6930p with windows 7 installed and everything was working fine until i did a recent windows upgrade (might just be a coincidence) and i suddenly lost internet connection. My laptop picks up the router, shows full strength but i cannot connect to the internet wireless or Ethernet cable. I restored to a previous date and it worked fine, and all my other devices work fine (iPad, iPhone, other laptops). The trouble is when i connected to the internet again it up dated windows and i cant restore back to the original date anymore as it has gone from the list.
View 5 Replies View RelatedWe lost internet connection and found out that our router's light is off. Is it possible that something is wrong with the adaptor?
View 1 Replies View Relatedmy compaq presario CQ50 suddenly will not connect to internet.my router is a linksys WRT54G.
View 2 Replies View RelatedI am running Windows 7 - 64 bit on my laptop. I currently have Avast Internet Security installed and I have tried to uninstall the Avast software as I wish to change my antivirus software. I have tried uninstalling in safe mode using the Avast Clear utility. Unfortunately after using this utility the Avast program still remains on my hard drive in Program Files which I then have to delete manually. After doing so and restarting my computer I have no internet connection and the only way I can restore my internet connection is by copying the Avast program back into my Program Files.
View 3 Replies View RelatedI have lost my wireless internet connection it has been working perfectly, I phoned Sky and they say I will have to speak to dell to see where my internet has gone. I have a Studio 1745 Laptop. Is there a manual disable button on my laptop that I may have disabled by mistake.
View 1 Replies View RelatedI changed a configuration and suddenly I lost the internet connectivity... Result of the command: "show running-config"
: Saved:ASA Version 8.2(1) !hostname ciscoasaenable password qVQaNBP31RadYDLM encryptedpasswd 2KFQnbNIdI.2KYOU encryptednames!interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 !interface Vlan2 nameif ATT security-level 0 pppoe client vpdn group ATT ip address pppoe setroute !interface Ethernet0/0 switchport access vlan 2!interface Ethernet0/1!interface Ethernet0/2!interface Ethernet0/3!interface Ethernet0/4!interface Ethernet0/5!interface Ethernet0/6!interface Ethernet0/7!ftp mode passiveclock timezone EST -5clock summer-time EDT recurringsame-security-traffic permit inter-interfaceobject-group service DM_INLINE_TCP_1 tcp port-object eq ftp port-object eq ftp-data port-object eq wwwaccess-list ATT_access_in remark Linkstation Accessaccess-list ATT_access_in extended permit tcp any host 99.23.119.78 object-group DM_INLINE_TCP_1 access-list ATT_access_in remark Linkstation
[code]....
I have a DELL inspiron N5110 laptop. I have 2 laptops at home including this one. However the Dell suddenly stopped connecting to our Sky broadband when it was previously connecting normally. The other devices including Iphones are fine! It says there is normal broadband connection, but then no internet connection! how to get back internet connection!
View 1 Replies View RelatedI have a Cisco ASA 5520 that we was working properly. I tried to create a VPN IPSEC to test but when I finished the wizard I lost the conection between the inside interface and outside. I use other interface for DMZ and other for printers network but this adapters are working properly. I have reviewed the NAT's and the ACL's but I don't see the problem?
I have delete the VPN IPSEC but it's still not working and I have the network down
I have a dual wan router with a main cable modem for high speed and a backup adsl modem hooked just in case. The problem is that quite often it seems that my ISP loose his connection to the internet but communication is not lost between my ISP and my modem and router. Because of this, my router doesn´t do the automatic changeover from my WAN 1 to my WAN 2 hooked slower ADSL modem. My router has the ping to keep alive option checked on the WAN 1 setings using my Cable ISP provided IP address.How can I force my router to notice that my cable ISP lost his connection to the internet and do right away the changeover from his WAN 1 to his WAN 2 input?
View 1 Replies View Related