How To Connect Multiple Virtual Machines On Windows 7
Apr 22, 2013I have installed 4 virtual machines using virtualbox on a windows 7 host and i'm searching how i could connect them so as they can communicate each other.
View 2 Replies
ADVERTISEMENT
Cisco Infrastructure :: 2509 - Create The Virtual Com Ports On Windows And Linux Machines?
Sep 5, 2011I recently acquired a 2509 router that I plan to use as a serial device router. My question is, how do you create the virtual com ports on Windows and Linux machines to point to the TCP address:ports in the 2509 router? Is there software or drivers that do this? Or something third-party?
View 12 Replies View RelatedCisco Firewall :: ASA5505 Using Outside Interface To Connect To Multiple Machines Inside
Oct 28, 2011I have been working on a configuration for single IP address (on outside ) of ASA5505.I am trying to utilize the outside address 192.168.0.249 to PAT/NAPT to 10 inside machines [code]
What I am not sure of (actually that could be considered all encompassing) is the mapped services/real services.Any constructive comments assistance?
Ports On Different Virtual Machines
Nov 6, 2011I have a single physical machine A (Windows XP). On A, I have 3 virtual machines (A1,A2,A3) If a want to communicate with port 4444 on virtual machine A1, can communicate to the same port 4444 on machine A2, All the VMs below exist on the same physical machine.
View 3 Replies View RelatedLost Internet Connection With My Virtual Machines
Feb 18, 2013Implement the procedures required so that machine 1 and machine 2 can communicate statically with one another. Outline the TCP/IP settings to be used on each of the machines and set this machine up accordingly.
I followed this guide [TUT] Setting a static internal IP (Windows and Linux)but what has happened is that now the two machines can't connect to the internet.
How To Allow Two Machines On Virtual Network To Communicate Statically
Feb 18, 2013Implement the procedures required so that machine 1 and machine 2 can communicate statically with one another. Outline the TCP/IP settings to be used on each of the machines and set this machine up accordingly.
View 4 Replies View RelatedConnect Windows XP Machines Together Without Domain
Oct 26, 2011I have 3 machines running windows XP, they all belong to my company's domain. These machines have to leave our office but still have to be able to connect to each other and share a few folders on each. I used to do this all the time. I would make sure to turn on the "Server" service, set the windows firewall to allow File and Printer sharing, set the File and Printer sharing setting in the Local Area Connection properties, and set the proper sharing/security of the specific folder. Then as long as each machine used a specific local logon name that was the same on each machine, they would all connect to the shares and work perfectly.However now, I seem to not be able to get any of this to work on machines that have service pack 3. Is there something in sp3 that breaks this?Isn't there a way to still share files on these sp3 machines even though I'm not on the domain? (without changing the domain membership)
View 9 Replies View RelatedCisco :: 5508 Virtual Machines With Bridged Connection / No IP From DHCP?
May 31, 2011We are experimenting with virtual machines running on some laptops here as part of a future deployment.Equipment in use:
-5508 WLC
-1262 LWAP
The actual operating system has no issues connecting to the wireless. When you start the virtual machine on any client machine (OSX, Win 7, Win XP, anything) it is unable to get an IP through an external DHCP server when the VM is set up to use a bridged connection.This works fine with Autonomous access points and over cable all mapped to the same VLAN. Helper addresses are configured on the VLAN.Is this a limitation of the WLC where it cannot provide more than one IP address per MAC? Is it a limitation of CAPWAP? Or is there an option to turn of DHCP snooping (which I suspect to be the cause of the issue)?
XP Machines Unable To Connect To Windows 7 Shares
Jan 26, 2011I have a Windows 7 machine sending shares across the network. Other Windows 7 machines have no problems connecting, but XP machines cannot connect. (Win7 can connect to XP shares).
I have adjust every setting that I have seen to no avail. This includes turning off HomeGroups, turning off password. Removing my password from my user account. Adding "Everyone" to each of the shares. I have even messed with the Local Group Policy Editor to send unencrypted passwords to third party SMB's.
Windows 7 - Connect Virtual Machine To Host Via IEEE1394 / USB Or Serial Port
May 15, 2013I have a host machine (Laptop, Win 7 Home Premium x64) running Windows 7 Ultimate x64 on VMWare Workstation 9. I've got this system set up for UMDF driver development, because I need a target machine to debug drivers on. However, because I'm developing drivers for Win 7 (x86 and x64), I cannot connect to the virtual machine on via a simple network connection. Connection methods are outlined here.
I have tried a few different pieces of software (mostly Eltima software), and have Google'd every combination of phrases that I can think of. I can't find any information on this anywhere. I don't just need to share data between the machines, I need a more "physical" connection.
Does any know how to do this, or if there's another (preferably more simple) way of doing it?
Servers :: Changing Network Information Of Multiple Machines?
Sep 25, 2012I have a list of servers that will be migrated from one subnet to another. Is there a script that can take my file that has the server name and the new IP address and modify the existing servers' network from the list? I want to place the script on the servers before I am ready to change subnets for preparation.
View 1 Replies View RelatedMachines With Windows 7 Are Not Working
Jul 24, 2011i have configured some machines into a workgroup. all machines are opening except two machines having windows 7 . they are showing a window for username and password as appears in a domain. how to correct it
View 3 Replies View RelatedSet Up A Functional VPN Between Two Windows 7 Machines?
Oct 15, 2012How can I set up a functional VPN between two windows 7 machines?
[code]....
Windows 7 Machines And Non-Operating Server
Sep 18, 2011I am on my home network and I do have a Windows 2008 Server and hopefully I will have another one soon. I also have 2 windows xp machines and 2 windows 7 machines and a non-operating server.
View 6 Replies View RelatedXP Pro Machines Can't Access Data On Windows 7 PC
Jan 18, 2011I'm having problems in a mixed XP Pro (SP3)/Win 7 Pro (64 bit) network getting the XP machines to access data on the Win7 box. The XP machines are connected wirelessly to a D-Link DSL-2640R router modem and the Win7 machine is connected via an Ethernet cable.
Internet access from all machines works perfectly.The two XP machines can see each other either via mapped drives or My Network Places and can access files.The Win7 PC can access data on both the 2 XP machines.All machines are part of the same Workgroup and the network is set up as 'Office' on the Win7 machine.The XP machines can see the Workgroup, including the Win7 machine after I changed the network type from Home to Office, but can not access the data on it.I assume this is a permissions problem on the Win7 machine. I've made the root directory of the HD in the Win7 machine shareable as \Hppro3125hd via Advanced Sharing/Properties and in the Advanced Sharing tab I have set the permissions for Everyone to Full Control.
There is only one user (Garry) explicitly set up on the Win7 machine. I've tried connecting to the Win7HD via a mapped drive on each of the XP machines by logging on as a different user i.e. matching the user name from the Win7 machine but still no joy.Is there an easy to follow step-by-step guide to lead me through the necessary steps to allow the XP machines to access data on the Win7 box?
VRF On Cisco 3550 Create Multiple Virtual Switch On Physical
Oct 17, 2011can we create VRF on Cisco 3550 EMI switch so that we can create mutiple virtual switch on physical switch.
View 4 Replies View RelatedSharing :: Connecting Two Windows 7 Machines Wirelessly?
Aug 10, 2011I am trying to connect 2 windows 7 machines wirelessly but without much luck.Both machines are connected to the wireless router and have internet connection. I have created a workgroup and put files into the the public folder, but still cannot get to the files even though the computers can see one another.
View 1 Replies View RelatedWindows 7 And XP Machines - Network Resource Access?
Jun 20, 2011We have a Windows 7 machine and two Windows XP machines. We use windows sharing of resources over a cisco wireless network. Sharing works fine on all computers for files and printers, however the DVD/CD Rom drives are not accessible.Sharing is enabled on all of these devices.When we try to access these DVD/CD Rom drives we get the following error message:Windows cannot access //computer name/resource name.You do not have permission to access //computer name/resource name. Contact your network administrator to request access.
View 1 Replies View RelatedInternet Connection Dropping By Windows 7 Machines Only?
Feb 4, 2011I recently added two Win7 computers to my ethernet network (one replaced an older computer, the other has brought the total to 4 machines). The original 2 workstations (XPpro) are fine, but the 2 new Win7 computers intermittently lose internet connection. They remain on the network, just lose internet. The 2 that are having the problem are wired directly to the first router, Linksys WRT160N. The 2 XP computers, that work perfectly, are wired 150 feet away, attached to a Linksys WRT54G used as an access point.The problem is much more severe on one of the new machines, with Win7 Home Deluxe - it stays offline about half of the time. The other, Win7 Pro, is occasionally waxed for 5 or ten minutes. Both use the Win7 default firewall & settings, I've added Avast free anti-virus but no additional firewall software. I have not noted any error messages other than the red X on the networking diagram, and the browser can't find page
View 2 Replies View RelatedEnabling File Sharing From A Windows 7 To XP / Vista Machines
Aug 3, 2012I've created a workgroup on windows 7 Laptop to connect with 2 other system, one is PC with win7 and another is laptop with win vista, I've a wirless wi-fi switch. Problem to share file with Windows Vista only, PC with Windows 7 is working well, But Windows vista laptop can't connect with any of two systems...
View 1 Replies View RelatedD-Link DIR-655 :: Get Machines To Connect To Mac Mini Through SMB
Dec 29, 2011I am using a Dlink 655 router. On the inside are DHCP systems. On the outside is my server. I cannot seem to get the inside machines to recognize my file shares outside the dlink. The outside server is a MAC mini. Any machine outside the server can see the file shares (regardless if they are a Mac or a Windows PC - So I know that SMB is set-up properly).How can I get the inside servers to see the file shares on the outside machine?
View 1 Replies View RelatedSetup LAMP On Virtual Box On Windows 7?
Nov 20, 2011I want to setup LAMP on Virtual Box on Windows 7. I am wondering if it is possible to (regular cable modem from ISP connected to desktop through ethernet port, dynamic IP)
1) Connect from Windows7 to Linux (Apache, MySQL-server, etc...)
2) Connect from Linux to the Internet
3) Connect from Windows 7 to the Internet ...all at the same time?
Virtual PC And Windows XP Mode Network Connectivity
Jun 17, 2011I have 64bit Windows7 Professional OS, and have installed Windows XP Mode, I have a wireless and ethernet-capable Router. My HP PC has both wireless and ethernet connection capability.When running Windows 7 alone, the Internet access is connected by wireless to the Router, and runs well but when I start Windows XP Mode, the Intel 21140-based PCI Fast Ethernet, complains if the Ethernet Cable is not plugged in to the Router.When I plug it in, I still get no Internet connectivity, the error is Windows cannot obtain an IP Address. How can I have the wireless and ethernet connectivity co-exist together or separately when required.
View 5 Replies View RelatedCisco :: Upgrade LMS Windows 3.2 To Virtual Appliance 4.1?
Sep 5, 2011currently have LMS 3.2 on a Windows server. I'd like to upgrade to 4.1 on a virtual appliance. I don't care about migrating data and would probably like to just start fresh. My question is If I were to download the 4.1 evaluation virtual appliance and also purchase the 3.2 to 4.1 upgrade license would I be able to apply that license to the evaluation?
View 6 Replies View RelatedCisco Switching/Routing :: Connect 3750G Switches To Some HP Machines
Jun 12, 2012We have to connect two 3750G switches to some HP machines. Those machines have several network interfaces, which are going to be configured in several bondings. The load balancing mode they want to configure is mode 6, alb. We have investigated and it is: [code] Receive load balancing is achieved through ARP negotiation.We would like to know if it is supported to be connected to a 3750G an if an special configuration is needed.
View 1 Replies View RelatedNetworking :: Linksys WRT320N - Use Hostname To Connect To Machines On LAN TG585v7
Jul 27, 2011I have just had my broadband upgraded to FTTC which means my router has had to change. Previously I was using a Thomson TG585v7 ADSL thingy provided by my ISP. One nice thing about that router was that it would act as a local DNS and allow me to find my other machines on the network by using <hostname>.lan instead of IP addresses.
I've now switched to a Linksys WRT320N ethernet router which connects to my fibre modem, and which I've updated to the latest firmware (1.0.04). I have 2 machines on the network which I regularly want to connect to each other; one is running Windows 7 and the other is running OS X Lion.
The problem I'm having is that I'm unable to connect to my Win7 machine from the OS X machine using the Win7 machine's name. However, I'm able to ping the OS X machine from my Win7 machine using the hostname.
Cisco Switching/Routing :: 880 W Router - Remote Computers Can't Connect To Target Machines
Jun 20, 2012I have and 880 W router. The LAN members can get out t o the internet. Now I want to configure NAT such that outside computers can access a couple of the machines using Remote Desktop (RDP). I am using Configuration Professional.
When I configure inside to outside, the remote computers can't connect to the target machines.When I configure outside to inside, the target machines acn't get to the internet.
When I try to use the advanced NAT definition wizard, I can't complete the task because the only inside pool (?) or LAN (?) is "designated" and not available to select. I can't free it up without deleting the one working NAT entry which is the one that enables all computers to reach the internet.
Can't Connect Client / Server In Virtual PC
Sep 29, 2011I'm having trouble connecting my client/server in my virtual PC. they just aren't seeing each other when it comes to connecting them to continue my server class.
server 2003 windows xp running on virtual PC I'm running windows 7 on my computer
How To Connect Website On Virtual Machine To The Internet
Jun 1, 2012I have created a virtual server that hosts a ticketing website on it, locally i can access the website when i input my private ip .
Now i want to make it accessible to the agents outside my company , i have change my private ip to a public one, but the problem is still there,i cant connect . i disabled the firewall , just so i would be sure its aint a F.W problem and still , not working .
Ubuntu 10.10 On Virtual PC 2007 - Cannot Connect To Internet
Feb 17, 2011I have installed Ubuntu 10.10 on Virtual PC 2007 on my desktop Windows machine. The internet connection has failed.
View 2 Replies View RelatedMultiple LAN Cards On Windows XP?
Mar 1, 2012I have 4 computers with 3 LAN cards (1 onboard + 2 PCI) installed on each of the machines. One of the machines run Windows Server 2008 and other 3 run Windows XP. I am trying to simulate routing on these desktops. I have connected all the machines in a mesh topology. Please refer to the image attached. I am able to ping all the 3 machines from the server machine. However when I try to ping the machines from the client PC running XP, it is able to ping only one machine connected to it. All the network cards on the client machine running XP show that they are connected (in control Panel-> network connections). But ping packet shows only one host is reachable. The other two network cards(that are not able to ping other machines) are showing red light. I am not able to get over this.
View 8 Replies View RelatedMultiple NIC Segregation In Windows?
Jul 11, 2012I'm in a shop that requires our workstations to have two NICs. One attaches to a router and through to a DCHP internet connection. The other is a static IP via crossover to our instrumentation system. The issue is that these systems can be extremely remote and rely on satellite or 3G Network connections and are not overly reliable. Every time our net connection drops, BOTH NICs reset, causing us data loss from our instrumentation. Any way to separate the connections so that if one drops, the other is left unmolested?
View 5 Replies View RelatedCan't See Multiple Work-groups In Windows 7
Oct 24, 2011As we all know, MS has changed the default workgroup names in different versions of windows. Additionally, you can rename your workgroup anything you like. I have XP, Vista, and Win7 computers, a television, BluRay player, a Wii, two printers, and a NAS with two USB drives attached. All of these -except the Win7- are wired to one of two switches. I have wireless: iPad, the Win7 notebook, Nintendo DSs. I have friend, and non-friend machines (computers, tablets, and phones) that come and go that are wired or wireless. The 3 windows computers all have the same workgroup name. All of my other units do not use workgroup names. I have a router, and two unmanaged switches, and have, on occasion, a second router. The main router, which has wired, and dual band wireless (each with two named wireless networks) nets, sees everything, by name and/or MAC address. Win7 is blind, deaf, and dumb.: it shows its own workgroup name, but no other workgroup name(s) , and, consequently, no unit on these other workgroups. It will show some wired units not in a workgroups - the television, and the printers (not the Wii or NAS). It will not show the wired XP computer! No wireless units either in workgroups or not in workgroups appear. Additionally, Win7 only shows units on its wireless network, not on the other three. The wired units it does show are not on any of the wireless networks, though it lists them on its wireless network.I have left the Homegroup, and terminated the Homegroup services. I have allowed discovery, and unlimited sharing of everything on every computer on the router, and yet the Win7 unit does not share or see well at all.Why?
View 2 Replies View Related