Windows 7 - Connect Virtual Machine To Host Via IEEE1394 / USB Or Serial Port
May 15, 2013
I have a host machine (Laptop, Win 7 Home Premium x64) running Windows 7 Ultimate x64 on VMWare Workstation 9. I've got this system set up for UMDF driver development, because I need a target machine to debug drivers on. However, because I'm developing drivers for Win 7 (x86 and x64), I cannot connect to the virtual machine on via a simple network connection. Connection methods are outlined here.
I have tried a few different pieces of software (mostly Eltima software), and have Google'd every combination of phrases that I can think of. I can't find any information on this anywhere. I don't just need to share data between the machines, I need a more "physical" connection.
Does any know how to do this, or if there's another (preferably more simple) way of doing it?
View 1 Replies
ADVERTISEMENT
Jan 5, 2013
VIRTUAL MACHINE ~ Can Guest OS become Infected Through Host OS ?If I setup and use a virtual machine running/containing both a Host OS and a guest OS ... do they remain completely separate entities when operating one or the other?My main concern is Virus related ... if for instance I'm Running Windows 7 as the host and XP as the guest and I get the host OS infected, will the guest XP OS also contract it by default because it is operating on the same disk?
View 1 Replies
View Related
Jan 11, 2012
One of the persons involved in a home network has installed a Dlink DIR-825 Rev-B Extreme router on the Comcast cable system to allow a 'better' wireless signal on upper floors of the home. Two others involved in the same home network use a 'secure desktop access' software called NetOp to access the network remotely. To facilitate this software, we must 'port forward' port 6502 on BOTH UDP and TCP to the single system that is accessed.
However, this setup (simple port forwarding) does not seem to work - neither does 'virtual server', for that matter. Prior to this router being installed, it was extremely simple to accomplish this remote access using a Linksys router, so our software firewall configuration has not changed but the new Dlink seems unable to allow remote access.
How (and via which of these access methods - port forwarding or virtual server) would be best? This configuration seems frustratingly difficult to accomplish and I'm about to take the Dlink 'out' of the network and re-install the Linksys with a 'high-gain' external antenna to facilitate simple signal enhancement.
View 3 Replies
View Related
Jun 1, 2012
I have created a virtual server that hosts a ticketing website on it, locally i can access the website when i input my private ip .
Now i want to make it accessible to the agents outside my company , i have change my private ip to a public one, but the problem is still there,i cant connect . i disabled the firewall , just so i would be sure its aint a F.W problem and still , not working .
View 2 Replies
View Related
Jun 7, 2012
I am trying to configure a NIC IPv4 with IPv6 disabled on a virtual machine (win server 2008)The instructions I got say that I need to use IP 192.168.210.0/24.However when I enter this IP and use subnet mask 255.255.255.0 I get the following error. Why this is and if there is a way to resolve the error?
View 3 Replies
View Related
Jan 5, 2012
I need to connect to the console port on a cisco firewall, an rj-45 connector. The cable is a rj-45 at one end and a serial on the other. My PC has no serial port and I am unable to use the provided cable to connect to the firewall appliance. Is there software that can allow serial over my PC's Ethernet? I really don't have time to order a serial card for my PC.
View 1 Replies
View Related
Feb 7, 2012
I have a PC behind a DSL router. In my PC (WinXP SP3) I have a virtual machine also running WinXP SP3. I would like to access the VM via remote desktop. Since I have a dynamic IP, I use the(url)tool to solve the problem. I installed the no-ip sync tool in the VM. Now when I write my no-ip address in the remote desktop from my office, I will access my host system, and not the hosted VM. Does any knows how I should configure things in order to get access to the virtual machine and not to the host machine
View 5 Replies
View Related
Aug 29, 2012
I wish to access my virtual pc remotely, As i have downloaded OTRS ticketing system on a virtual machine and i wish to access it remotely. The physical server IP is 62.84.xx.xx the Virtual server IP is 10.0......"check link below please"
View 2 Replies
View Related
Aug 10, 2012
I still use some old applications on windows XP.So I run them on vware.I could visit the real PC from virtual PC without any problem.But I could not visit the virtual pc by another real PC.No matter how I change the connection type.
View 1 Replies
View Related
Apr 25, 2012
We have purchased LMS 4.0 -300 and were wondering how well the software will perform on a Virtual Enviornment.
View 3 Replies
View Related
Feb 7, 2013
I'm in the process of installing a Virtual Clustering for studying and wanted to get some mail filtering for my Exchange 2010. Of course my clients and what I normally use is cloud filtering like mimecast, etc. Any know of a local filtering software or a virtual machine that does filtering I can place between my IP and Exchange?
View 3 Replies
View Related
Aug 14, 2012
how to transfer the messages or files from one virtual machine to another virtual machine in oracle virtual box
View 1 Replies
View Related
Feb 18, 2013
Implement the procedures required so that machine 1 and machine 2 can communicate statically with one another. Outline the TCP/IP settings to be used on each of the machines and set this machine up accordingly. I followed this guide http:[URL]....tid=210 but what has happened is that now the two machines can't connect to the internet. How can I fix this?
Here is a links to the ipconfig/ all on the XP virtual machine http:[URL]....the default gate way here is the same as on my actual working machine.
View 2 Replies
View Related
Feb 17, 2013
I am running a websever on virtual machine on ubuntu .how can i forward all traffic coming to my ip to virtual machine which is 192.168.1.4 on my LAN.here are my configs.
OS - Windows 7
Router - DLink
Virtual machine network Setting - Bridged adapter.
View 19 Replies
View Related
Mar 3, 2013
I recently installed VMplayer on my Win 7 machine, and I installed Win XP on the VM. So far everything seems to work fine. However, on my home network I have a Linksys NSLU2 mini network server which has a flash drive plugged in that contains my files that I access from any of my home PC's. No problem accessing it from the Win 7 machine, but when I try to setup a "new network place" on the XP system, I get an error telling me that the address is not valid.
View 8 Replies
View Related
Sep 22, 2012
My host OS is Ubuntu 12.04 and I am running a LAMP stack there. I have several Windows virtual machines (XP and Windows7) running in Virtual Box so I can test IE6, IE7, etc..
I frequently move this laptop between a few wireless networks and sometimes I am without an internet connection. I pause and save the VM execution state. Regardless, I want the virtual machines to be able to access the sites I am hosting locally on Ubuntu. The virtual machines do not need regular internet access. On the host I can point the browser at localhost or any subdirectory that apache is serving and view pages I've set up already. What is the best configuration for this?
Should I use Bridged or NAT virtual adaptors and should the guests use static IP's or DHCP ? I've also considered using ad-hoc networks between guests and host, but I think this will require that the host disconnect from any other networks (with internet access).
View 1 Replies
View Related
Aug 2, 2011
I have a strange error on my home network that I cannot find a solution to.I have an Huawei SmartAX MT882 from TalkTalk acting as a modem connected to a D-Link DSL-G624T acting as a router/switch. Connected to the D-Link I have a Windows 7 Pro machine (64-bit, SP1) and an XP (home i think) machine (sp 2 i think).The SmartAX modem is set up to perform DHCP and DNS relaying and the D-Link has DHCP turned off and DNS relay turned off.The Win7 machine can access the network, get an IP address and access the internet without problems, regardless as to the status of the XP machine.The XP machine can access the network, get an IP address and access the internet with no problems ONLY of the win7 is powered up. When the win7 machine is off, the XP machine seems to drop about 25% of the ping packets between it and the D-Link router and has no internet access (because of this i assume). [code]
View 8 Replies
View Related
Jul 20, 2011
New Win-7 machine set up. I used the printer set-up wizard to install a networked printer in the new machine with absolutely no problem. Proved it would print from that machine.Now, I get a call informing me that her old XP machine, which had been printing to the network printer with no problems, will no longer print.Documents go into the print queue, but they don't get printed.No error messages show up.I did some messing around via remote access, and finally removed the printer with the intention of reinstalling it.Scanning for network printers turned up several redundant instances of the same printer with different names. Some are identified as "invalid" some a "access denied". Bottom line. I can't get any of the selections to install.On the Win-7 machine I did find a window that indicated that the printer is designated as being shared, but I didn't explicitly set it for sharing when I installed it. Also, I somehow got to a window that told me that for printers that were to be shared with other versions of windows I could optionally install drivers to support such machines. Didn't have the driver disk handy and took the window down. Now I can't even find it again.I need sorting this all out.Part of the problem is that out there in "network land" there are redundant remnants of previous installations that are being remembered inappropriately.
View 11 Replies
View Related
Apr 22, 2013
I have installed 4 virtual machines using virtualbox on a windows 7 host and i'm searching how i could connect them so as they can communicate each other.
View 2 Replies
View Related
Jul 8, 2012
Basically, I am swapping my Atom/ION nettop (that I use as a file server, game server, torrent server etc. etc.) for one that has no fans and no mechanical HDD. I control it primarily via RDP, so I don't need to plug a keyboard or display into the nettop itself.
The new one I'm getting should be a step up due to the whole no moving parts thing, as well as the much faster CPU. But Intel, in their infinite wisdom, have not provided (and don't plan on providing) a 64bit graphics driver for the GMA 3650.
If I were to install 64bit Windows on this new machine without installing a driver for the graphics, would I have any issues using RDP? I'm not sure if the visuals are generated on the host or the client and whether it would matter either way.
View 2 Replies
View Related
Jan 22, 2012
it was possible to install RSA Authentication Manager server into the ACS 5.3 Virtual Machine ?
View 0 Replies
View Related
Feb 2, 2011
Running a Windows 7 laptop plugged into a LAN using ethernet cable with internet.The built-in wireless nic on the laptop connects to a totally different internet network. I set up an XP Mode Virtual PC on the laptop with the intention that it would use the wireless internet connection.I set this up by installing Microsoft Loopback Adapter, then sharing the wireless nic to it. The Virtual PC is set to use the Microsoft Loopback Adapter as its network connection.My problem is that only the hard wired internet connection works.The wireless is connected and has an ip address, however no traffic flows through it until i either disable the cabled network or physcially unplug the cable. Is it possible to have my host laptop use the cabled internet connection and my virtual pc use the 2nd wireless internet?
View 1 Replies
View Related
Jan 3, 2011
I just replaced my router and EVERY time I do anything the win 7 machine is a pain in the A to get connected again. My two macs (wireless) and my Vista PC (wired), not one single problem but this win 7 thing I can't get to connect. It is wired not wireless.
View 10 Replies
View Related
Mar 29, 2013
I have a DIR-655 B1 with FW 2.05.I have different computers/phones connected to internet via the router, both via wifi and ethernet. I have Linux/Windows 7/Android and iOS units. Two weeks ago one of my Windows 7 laptops did not connect to internet and I thought it was the computer. I did a lot of troubleshooting the computer, still did not work at home. When I brought the laptop to a friend it work directly. Now I started to think that it was the router that was the problem. On the status page I can see that the machine got an IP address in the "LAN Computers" part. I can confirm in the laptop that it received the same IP address via DHCP.
I have look around in the menus but can not find anything that should make this computer not connect. I can not even login to the router via this computer.
View 7 Replies
View Related
Nov 15, 2012
I have been working with a friend set up a brand new laptop with Win-7 Home Premium (64 bit) preinstalled. I did the initial set-up at my home, with the machine connected via broadband internet cable to my router. I had absolutely no problem getting it to connect with the internet. Didn't bother to try getting the thing going wirelessly at my location. During the initial setup, I selected "home" as the network type (as opposed to public, etc.)But, when I took the machine to the owner's home, it wouldn't connect via her broadband modem.
Mousing over the network icon in the tray area brings up a tool-tip baloon, "Unidentified Network, No internet access). Opening the Sharing Center shows the network as "Unidentified Network, Public Network. None of the settings accessible to me from that point seemed useful or relevant.I have not been able to find appropriate settings to redefine the network type, etc. Her old machine, which is in the process of dying, is still able to connect, and I'm using the same cable to connect both machines. To top it off, I very recently upgraded my own laptop to Win-7, so I took it over there and it exhibits the same problem. And, if I bring her machine back to my house it connects right up with no fuss at all.
View 14 Replies
View Related
Mar 9, 2012
I'm having problems connecting to the VPN. I can access the web portal, but cannot connect SSL VPN on my Mac 10.7, or a virtual windows 7 machines. I've read a lot of forum posts about the mac problem, but for some reason the Windows 7 machine won't connect SSL VPN on windows 7 x64, Chrome, FIreFox.
I tried downloading QuickVPN and set up a user account, but it just sits on the machine at the "Connecting" screen. My primary users will be running Windows 7 Professional x64.
View 1 Replies
View Related
Feb 23, 2011
I've been trying to set-up DMZ for my DSL-2542B-SE_1.00_06112008.
But the problem is when I access my IP from WAN, It connects to Router Control Panel, I have set DMZ IP as 192.168.1.2 which is the my computer where I have the Server set-up.
Now I've disabled DMZ but still I can access to my router from WAN through my IP.
View 2 Replies
View Related
Apr 28, 2012
My host has an IP of 20.168.1.2 from a router DHCP. I have a virtual environment which has a DC and DNS and the IP is: 192.168.1.x how can I get access from my host to the virtual environment? What do I need to setup on the host OS? (Windows)
View 3 Replies
View Related
Apr 27, 2013
I have a single cisco 11503 load balancer.There is a single Banner student information system which is load balanced on it with Virtual ip 10.3.20.101 which is working fine without any issues .I am now trying to add an Oracle ERP application with virtual IP 10.3.20.230 and physical ips 10.3.19.22 and 10.3.19.23 all on port 8003.When I just make the group ERP-Apps-Grp active , the vitual ip address 10.3.20.230 is pingable , but when I make the the content Erp_IAT active it stops pinging. [code]
View 6 Replies
View Related
Apr 27, 2011
When I try to ping ipv6.xsnews.nl on either of my Windows 7 computers, it returns "Ping request could not find host". But when I do it on XP, it succeeds. I have tried putting the W7 PC in the DMZ, disabling the software firewall but it doesn't work.
What I think it involves is having ipv6 installed on each. I tried to duplicate the setup of both the XP and a W7 computer, installing the gogo6 tunnel. But apparently it's not setup on this computer because the ping result is the same as on the third computer which hasn't had ipv6 installed. s not setup on this computer because the ping result is the same as on the third computer which hasn
View 3 Replies
View Related
Apr 29, 2012
I have a network problem. My windows 7 machine is not detecting win xp machine whereas win xp machine is detecting win 7 machine. They are in the same workgroup named Home. And the networking system is set to work. I have left the homegroup I was previously in. I enabled file sharing for devices that use 40 bit and 50 bit encryption. On XP I have enabled NetBios over TCP/IP. File sharing is enabled on both computers. I think it's something obvious as both instalations on different computers are really fresh and both windows haven't been tampered with.
View 12 Replies
View Related
Jun 3, 2008
I have a WLC 2006 running 4.2.130 code with AP1020s.I also have several users that have VMware machines that run various flavors of Linux, etc Virtual Machines on Windows XP Pro.
The Windows XP works fine on the wireless. It is the VMWare Virtual Machine running the Bridged ethernet connection that have problems.
The problem is that the Virtual Machine doesn't get a DHCP IP address from the wireless network.
If the user plugs into the wired network all works fine.I have done some captures that show the DHCP requests going out with the MAC address of the wireless client, but no DHCP replies.
It looks like the WLC is seeing the additional DHCP requests from the MAC address of the wireless adapter and dropping them.The same DHCP server (different scopes) are used for both wireless and wired clients.
The DHCP server shows NO activity when the Virtual Machine tries to get a DHCP IP address.The DHCP server is a Cat 6500 running IOS v12.2(33)SXH. DHCP activity was monitored using debug IP dhcp server events/debug IP dhcp server packets. The VMWare Workstation tried is 6.02-6.04.
View 13 Replies
View Related
Feb 16, 2011
I am having an issue opening a port (4040) on the 655 for my Fedora-based subsonic server. Inside the LAN, I can see the device from other peer machines, so I am confident the port is open and listening. However, I can't seem to get to the machine-port from outside/internet.
I have tried Virtual Server and Port Forwarding with single port. The server has a stactic IP which I've included in the DHCP range and outside the range. I have a DSL connection (AT&T), modem only. I have updated firmware. I have exhausted the Subsonic community's knowledge, everything points to the router, but all the settings seem correct. What am I missing? Is if possible there is a defect in the router? (don't laugh). Is there a way to trace a request to that port to see where it is hanging?
(yes, I've STFA, but don't know what else to do).
View 2 Replies
View Related
