I am trying to configure a NIC IPv4 with IPv6 disabled on a virtual machine (win server 2008)The instructions I got say that I need to use IP 192.168.210.0/24.However when I enter this IP and use subnet mask 255.255.255.0 I get the following error. Why this is and if there is a way to resolve the error?
View 3 Replies
I have a PC behind a DSL router. In my PC (WinXP SP3) I have a virtual machine also running WinXP SP3. I would like to access the VM via remote desktop. Since I have a dynamic IP, I use the(url)tool to solve the problem. I installed the no-ip sync tool in the VM. Now when I write my no-ip address in the remote desktop from my office, I will access my host system, and not the hosted VM. Does any knows how I should configure things in order to get access to the virtual machine and not to the host machine
View 5 Replies View RelatedI wish to access my virtual pc remotely, As i have downloaded OTRS ticketing system on a virtual machine and i wish to access it remotely. The physical server IP is 62.84.xx.xx the Virtual server IP is 10.0......"check link below please"
View 2 Replies View RelatedI still use some old applications on windows XP.So I run them on vware.I could visit the real PC from virtual PC without any problem.But I could not visit the virtual pc by another real PC.No matter how I change the connection type.
View 1 Replies View RelatedWe have purchased LMS 4.0 -300 and were wondering how well the software will perform on a Virtual Enviornment.
View 3 Replies View RelatedI'm in the process of installing a Virtual Clustering for studying and wanted to get some mail filtering for my Exchange 2010. Of course my clients and what I normally use is cloud filtering like mimecast, etc. Any know of a local filtering software or a virtual machine that does filtering I can place between my IP and Exchange?
View 3 Replies View Relatedhow to transfer the messages or files from one virtual machine to another virtual machine in oracle virtual box
View 1 Replies View RelatedVIRTUAL MACHINE ~ Can Guest OS become Infected Through Host OS ?If I setup and use a virtual machine running/containing both a Host OS and a guest OS ... do they remain completely separate entities when operating one or the other?My main concern is Virus related ... if for instance I'm Running Windows 7 as the host and XP as the guest and I get the host OS infected, will the guest XP OS also contract it by default because it is operating on the same disk?
View 1 Replies View RelatedImplement the procedures required so that machine 1 and machine 2 can communicate statically with one another. Outline the TCP/IP settings to be used on each of the machines and set this machine up accordingly. I followed this guide http:[URL]....tid=210 but what has happened is that now the two machines can't connect to the internet. How can I fix this?
Here is a links to the ipconfig/ all on the XP virtual machine http:[URL]....the default gate way here is the same as on my actual working machine.
I am running a websever on virtual machine on ubuntu .how can i forward all traffic coming to my ip to virtual machine which is 192.168.1.4 on my LAN.here are my configs.
OS - Windows 7
Router - DLink
Virtual machine network Setting - Bridged adapter.
I have created a virtual server that hosts a ticketing website on it, locally i can access the website when i input my private ip .
Now i want to make it accessible to the agents outside my company , i have change my private ip to a public one, but the problem is still there,i cant connect . i disabled the firewall , just so i would be sure its aint a F.W problem and still , not working .
I recently installed VMplayer on my Win 7 machine, and I installed Win XP on the VM. So far everything seems to work fine. However, on my home network I have a Linksys NSLU2 mini network server which has a flash drive plugged in that contains my files that I access from any of my home PC's. No problem accessing it from the Win 7 machine, but when I try to setup a "new network place" on the XP system, I get an error telling me that the address is not valid.
View 8 Replies View RelatedMy host OS is Ubuntu 12.04 and I am running a LAMP stack there. I have several Windows virtual machines (XP and Windows7) running in Virtual Box so I can test IE6, IE7, etc..
I frequently move this laptop between a few wireless networks and sometimes I am without an internet connection. I pause and save the VM execution state. Regardless, I want the virtual machines to be able to access the sites I am hosting locally on Ubuntu. The virtual machines do not need regular internet access. On the host I can point the browser at localhost or any subdirectory that apache is serving and view pages I've set up already. What is the best configuration for this?
Should I use Bridged or NAT virtual adaptors and should the guests use static IP's or DHCP ? I've also considered using ad-hoc networks between guests and host, but I think this will require that the host disconnect from any other networks (with internet access).
it was possible to install RSA Authentication Manager server into the ACS 5.3 Virtual Machine ?
View 0 Replies View RelatedI have a host machine (Laptop, Win 7 Home Premium x64) running Windows 7 Ultimate x64 on VMWare Workstation 9. I've got this system set up for UMDF driver development, because I need a target machine to debug drivers on. However, because I'm developing drivers for Win 7 (x86 and x64), I cannot connect to the virtual machine on via a simple network connection. Connection methods are outlined here.
I have tried a few different pieces of software (mostly Eltima software), and have Google'd every combination of phrases that I can think of. I can't find any information on this anywhere. I don't just need to share data between the machines, I need a more "physical" connection.
Does any know how to do this, or if there's another (preferably more simple) way of doing it?
I have a WLC 2006 running 4.2.130 code with AP1020s.I also have several users that have VMware machines that run various flavors of Linux, etc Virtual Machines on Windows XP Pro.
The Windows XP works fine on the wireless. It is the VMWare Virtual Machine running the Bridged ethernet connection that have problems.
The problem is that the Virtual Machine doesn't get a DHCP IP address from the wireless network.
If the user plugs into the wired network all works fine.I have done some captures that show the DHCP requests going out with the MAC address of the wireless client, but no DHCP replies.
It looks like the WLC is seeing the additional DHCP requests from the MAC address of the wireless adapter and dropping them.The same DHCP server (different scopes) are used for both wireless and wired clients.
The DHCP server shows NO activity when the Virtual Machine tries to get a DHCP IP address.The DHCP server is a Cat 6500 running IOS v12.2(33)SXH. DHCP activity was monitored using debug IP dhcp server events/debug IP dhcp server packets. The VMWare Workstation tried is 6.02-6.04.
I have a strange error on my home network that I cannot find a solution to.I have an Huawei SmartAX MT882 from TalkTalk acting as a modem connected to a D-Link DSL-G624T acting as a router/switch. Connected to the D-Link I have a Windows 7 Pro machine (64-bit, SP1) and an XP (home i think) machine (sp 2 i think).The SmartAX modem is set up to perform DHCP and DNS relaying and the D-Link has DHCP turned off and DNS relay turned off.The Win7 machine can access the network, get an IP address and access the internet without problems, regardless as to the status of the XP machine.The XP machine can access the network, get an IP address and access the internet with no problems ONLY of the win7 is powered up. When the win7 machine is off, the XP machine seems to drop about 25% of the ping packets between it and the D-Link router and has no internet access (because of this i assume). [code]
View 8 Replies View RelatedNew Win-7 machine set up. I used the printer set-up wizard to install a networked printer in the new machine with absolutely no problem. Proved it would print from that machine.Now, I get a call informing me that her old XP machine, which had been printing to the network printer with no problems, will no longer print.Documents go into the print queue, but they don't get printed.No error messages show up.I did some messing around via remote access, and finally removed the printer with the intention of reinstalling it.Scanning for network printers turned up several redundant instances of the same printer with different names. Some are identified as "invalid" some a "access denied". Bottom line. I can't get any of the selections to install.On the Win-7 machine I did find a window that indicated that the printer is designated as being shared, but I didn't explicitly set it for sharing when I installed it. Also, I somehow got to a window that told me that for printers that were to be shared with other versions of windows I could optionally install drivers to support such machines. Didn't have the driver disk handy and took the window down. Now I can't even find it again.I need sorting this all out.Part of the problem is that out there in "network land" there are redundant remnants of previous installations that are being remembered inappropriately.
View 11 Replies View RelatedI have a network problem. My windows 7 machine is not detecting win xp machine whereas win xp machine is detecting win 7 machine. They are in the same workgroup named Home. And the networking system is set to work. I have left the homegroup I was previously in. I enabled file sharing for devices that use 40 bit and 50 bit encryption. On XP I have enabled NetBios over TCP/IP. File sharing is enabled on both computers. I think it's something obvious as both instalations on different computers are really fresh and both windows haven't been tampered with.
View 12 Replies View RelatedI have a single physical machine A (Windows XP). On A, I have 3 virtual machines (A1,A2,A3) If a want to communicate with port 4444 on virtual machine A1, can communicate to the same port 4444 on machine A2, All the VMs below exist on the same physical machine.
View 3 Replies View RelatedI have Vista as my Host OS and using Microsoft Virtual PC, I have Installed 3 machines (XP, Win2003 and Linux)I am connected to Internet via USB data card.My guest OS are not able to see each other(ping each other).
View 14 Replies View RelatedI want to setup a lap environment for my studies using Microsoft Virtual pc. I have installed 3 virtual pc of which 2 are windows server 2008 named srv1 and srv2, the third virtual pc is running windows XP professional services pack 2 with the host operating system being windows 7.I have installed Microsoft loop-back adapter and i am trying to network the 3 virtual pc and the host.
srv1 ip address is 192.168.2.200
srv2 ip address is 192.168.2.201
wk1 ip address is 192.168.2.10
host pc's ip addresss for the loopback adaptor is 192.168.2.5 when i check the workgroup i see only srv1 and srv2 i am only able to ping srv1 and svr2, the rest are unreachable.
I have an issue with virtual box as it is blocking all my ports when the adapter is set as bridged. My OS is Windows 7 and the OS I am trying to connect to is Win 2k3 Server.
I made it bridged to be on the same LAN. how I can open ports and can be able to telnet for example port 80?
I want to setup a virtual LAN setting in a single machine, whats the procedure?
View 1 Replies View RelatedWhat is the best virtual software to run on the server
View 1 Replies View RelatedI want to install a windows operating system in my machine but my machine dont have a CD-ROM. so i want to install an OS from using my another PC(Laptop)'s CD-ROM. So is it possible to install OS into my one machine from another different machine(windows-7) via sharing the drive .
View 4 Replies View RelatedI have a server that is running on 2003 and we are having a few problems and in the event log I am getting id101 with the message whats virtual is not enable and i am not sure what this refers to or how to sort it out.
View 2 Replies View RelatedI want to setup LAMP on Virtual Box on Windows 7. I am wondering if it is possible to (regular cable modem from ISP connected to desktop through ethernet port, dynamic IP)
1) Connect from Windows7 to Linux (Apache, MySQL-server, etc...)
2) Connect from Linux to the Internet
3) Connect from Windows 7 to the Internet ...all at the same time?
Sometime in the past month my virtual server has been serving slow speeds to a majority of places when I used to get 500KB/s + speeds down and 250KB/s speeds up regularly. My home network is Verizon Fios 15/5 and speedtest.net reports exactly those speeds at any test server I choose.
I've been going back and forth with my virtual server host (1and1) about my virtual server download and upload speeds. I've done a lot of testing to see if there is packet loss with WinMRT and also traceroutes from a couple locations.1and1 has done testing and verified it's NOT their network causing the slow downs as their download tests have returned fast speeds. I've tested at about 8 locations to download this file ( [URL] I can assure you that link is safe, it's just a zip of the .Net 4 redist pacakge) and 6 out of the 7 get speeds ranging from 10kb/s-50kb/s, only 1 out of the 7 gets 400kb/s+ download speeds and that is located in Chicago, 4 are from Los Angeles area and 2 from Denver area and one from Orlando area.
Is it possible to get some users (Preferably West Coast USA) here to download and report the speed it downloads, location they are at, and the internet provider and package they have? If I cannot find the cause of this, I may have to move to a different virtual server provider which takes a lot of configuration for my server because of the nature of it
I need a virtual switch in my Linux OS instead of a real switch for doing some research purpose. Means it works same as a real hardware switch work. Suggest me any virtual switch for linux. For example there are 3com, cisco switches.. I need a virtual switch which work same as real switch.
View 1 Replies View RelatedRunning a Windows 7 laptop plugged into a LAN using ethernet cable with internet.The built-in wireless nic on the laptop connects to a totally different internet network. I set up an XP Mode Virtual PC on the laptop with the intention that it would use the wireless internet connection.I set this up by installing Microsoft Loopback Adapter, then sharing the wireless nic to it. The Virtual PC is set to use the Microsoft Loopback Adapter as its network connection.My problem is that only the hard wired internet connection works.The wireless is connected and has an ip address, however no traffic flows through it until i either disable the cabled network or physcially unplug the cable. Is it possible to have my host laptop use the cabled internet connection and my virtual pc use the 2nd wireless internet?
View 1 Replies View RelatedI'm having trouble connecting my client/server in my virtual PC. they just aren't seeing each other when it comes to connecting them to continue my server class.
server 2003 windows xp running on virtual PC I'm running windows 7 on my computer
I have XP running on this older laptop for my kids.I wish to connect this laptop wireless (WPA2 encrypted) with the internet AND with other hardware in my home (other pc, harddisk, mediaplayer, printer).I know it can be done in windows 7, and Microsoft also had a virtual WiFi research project for a WEP encrypted visual WiFi.But as said I need a WPA2 encrypted virtual WiFi for a laptop running XP.
View 14 Replies View Related
