I want to install a windows operating system in my machine but my machine dont have a CD-ROM. so i want to install an OS from using my another PC(Laptop)'s CD-ROM. So is it possible to install OS into my one machine from another different machine(windows-7) via sharing the drive .
View 4 Replies
I have a strange error on my home network that I cannot find a solution to.I have an Huawei SmartAX MT882 from TalkTalk acting as a modem connected to a D-Link DSL-G624T acting as a router/switch. Connected to the D-Link I have a Windows 7 Pro machine (64-bit, SP1) and an XP (home i think) machine (sp 2 i think).The SmartAX modem is set up to perform DHCP and DNS relaying and the D-Link has DHCP turned off and DNS relay turned off.The Win7 machine can access the network, get an IP address and access the internet without problems, regardless as to the status of the XP machine.The XP machine can access the network, get an IP address and access the internet with no problems ONLY of the win7 is powered up. When the win7 machine is off, the XP machine seems to drop about 25% of the ping packets between it and the D-Link router and has no internet access (because of this i assume). [code]
View 8 Replies View RelatedNew Win-7 machine set up. I used the printer set-up wizard to install a networked printer in the new machine with absolutely no problem. Proved it would print from that machine.Now, I get a call informing me that her old XP machine, which had been printing to the network printer with no problems, will no longer print.Documents go into the print queue, but they don't get printed.No error messages show up.I did some messing around via remote access, and finally removed the printer with the intention of reinstalling it.Scanning for network printers turned up several redundant instances of the same printer with different names. Some are identified as "invalid" some a "access denied". Bottom line. I can't get any of the selections to install.On the Win-7 machine I did find a window that indicated that the printer is designated as being shared, but I didn't explicitly set it for sharing when I installed it. Also, I somehow got to a window that told me that for printers that were to be shared with other versions of windows I could optionally install drivers to support such machines. Didn't have the driver disk handy and took the window down. Now I can't even find it again.I need sorting this all out.Part of the problem is that out there in "network land" there are redundant remnants of previous installations that are being remembered inappropriately.
View 11 Replies View RelatedI have a network problem. My windows 7 machine is not detecting win xp machine whereas win xp machine is detecting win 7 machine. They are in the same workgroup named Home. And the networking system is set to work. I have left the homegroup I was previously in. I enabled file sharing for devices that use 40 bit and 50 bit encryption. On XP I have enabled NetBios over TCP/IP. File sharing is enabled on both computers. I think it's something obvious as both instalations on different computers are really fresh and both windows haven't been tampered with.
View 12 Replies View RelatedI am trying to configure a NIC IPv4 with IPv6 disabled on a virtual machine (win server 2008)The instructions I got say that I need to use IP 192.168.210.0/24.However when I enter this IP and use subnet mask 255.255.255.0 I get the following error. Why this is and if there is a way to resolve the error?
View 3 Replies View RelatedI am working on a project at my company. In short, there is one PC in the office to which other user must remotely connect to perform certain tasks. The stuff they do must be done from the machine with the specific IP, the IP of that machine, as this is specified in agreements with the companies we work with. So far, we have been using Remote Desktop (our machines are Windows-XP-based PC's), but this is quite annoying when more than one person needs to use the machine at the same time
View 3 Replies View RelatedIf i want to send a packet from one host to another host through a router, how will the packet be sent? I mean what are the stages that a packet can reach to the destination.
View 6 Replies View RelatedI am trying to link a Windows 7 machine with a laptop running Windows XP. The workgroup on both computers is the same. On the Win7 machine, I have a couple of folders set to be shared. The first is the C Drive and the share name is C-drive. The second is Quickbooks that I have named Quickbooks. On the XP machine, I went to map network drive and in the blank typed \Remote1C-drive. It asked for username and password and just like that we were connected. But I can't see all of the files on this drive. I don't even see all of the folders - one of which is Quickbooks. So I tried \Remote1Quickbooks and Windows XP couldn't find that path even though I'm positive that folder is shared on Win7. So no matter what I try, I can't see this folder on the XP machine, I even tried copying this folder to other locations around the computer and setting up shares in hope that something would work, but it never did. So I went back to the C Drive share on the XP machine. I tried to go in reverse, creating a file and putting it on the root of the c drive (I did this on the XP machine, but the file should have actually been located on the Win7 machine. When I check Win7, the file didn't exist. So I tried the other way. I right clicked on the c drive in Win7 and created a new bitmap image file. Back to the XP laptop, that file doesn't show. But if I look at the c-drive on Win7 from the xp machine, I see several other folders and some of them like Program Files contains actual files. But some of them are just empty such as \Remote1C.
View 6 Replies View RelatedI have two routers in my office, each one having wireless extensions and its own DSL connection.I want machine on A subnet communicate with machine on B,I'll need some sort of physical connection (a cable? a new device?).Router A and B are typical home router with wifi extension: they only have a WAN port,I won't be able to let them talk to each other simpy by plugging an Ethernet cable between two LAN ports, since the two routers are on different subnets.
View 4 Replies View RelatedBasically, I am swapping my Atom/ION nettop (that I use as a file server, game server, torrent server etc. etc.) for one that has no fans and no mechanical HDD. I control it primarily via RDP, so I don't need to plug a keyboard or display into the nettop itself.
The new one I'm getting should be a step up due to the whole no moving parts thing, as well as the much faster CPU. But Intel, in their infinite wisdom, have not provided (and don't plan on providing) a 64bit graphics driver for the GMA 3650.
If I were to install 64bit Windows on this new machine without installing a driver for the graphics, would I have any issues using RDP? I'm not sure if the visuals are generated on the host or the client and whether it would matter either way.
i have one xp machine. i wnd to configure two different dial up connection in one xp machine for band width sharing.
View 1 Replies View RelatedI have connected fax machine with line card, line card with Modem (MT5656SMI), and with modem is connected to PC UART. i want to pause the fax machine from PC, while scanning. i gave AT+FTS=10 command. but it did not worked.
how to pause the fax machine during scanning??
I have two Win XP machines and a Linux Mint. I can access the shared folders of my Win machines from Linux but Win machines, in the Workgroup, shows the Linux connection as "MyMint server (Samba, Linux Mint)(MyMint)" but I can't access files on that machine. "MyMint" is the computer name.
View 3 Replies View RelatedAre there any fax machine that operate without a landline
View 1 Replies View RelatedI have a Windows 7 machine connected to my TV set. I want this machine to act as much as an appliance and as little as a PC as possible. To that end, I want it to be able to access my NAS disk, but not the Internet. Internet = annoying update messages (think Adobe), viruses, crap.I don't know if this is a setting that I can do in Win7 or in the DI-Link AirPlusG router thing
View 2 Replies View RelatedI have 2 NIC cards on the same machine running Redhat 9.I need to setup the machine in such a way that both cards are in the same subnet but card on port eth1 can be reached through card on port eth0.I tried modifying the iptables (with the limited knowledge that I have on it,used google) and even tried turning it off.I also tried setting files /proc/sys/net/ipv4/ip_forward and /proc/sys/net/ipv4/conf/all/proxy_arp to 1 but was unable to ping from IP address on port 0 to IP address on port 1 and vice-versa
View 1 Replies View RelatedEverything in the house can connect to the internet aside from my windows 7 machine. It was working fine acouple days ago. it was connecting via a wireless network adapter through a USB. I tried switching the USB ports, hardwiring, re-ownloading/installing the drivers and even reformatting the machine. i still cannot get an internet connection. Only logical thing to do would be to replace the NIC ?
View 3 Replies View RelatedI have set up an ACS (5.2) to do EAP-TLS Machine and User Authentication.I am getting intermittent results with the machine authentication using the same laptop as a test client.When the machine authentication succeeds the RADIUS name shows as host/xxx-yyy.When the machine authentication fails the RADIUS name shows as xxx-yyy without the host/.
View 9 Replies View RelatedI have a question relating to installing lines underground in a conduit.
We've had several lines get hit by lighting which leads to the line being bad, equipment being damaged and so on. We've then installed a new cat6e cable WITH lightning arrestors which were blown almost instantly on the first storm. This is obviously a bad ground issue, and a risk to the equipment.
This being said, I would like very much to run fiber optic cable in this conduit and then convert it to ethernet, but I don't know if fiber is susceptible to lighting like ethernet cable is, OR if there are other methods to prevent this freak of nature crap!
Is it possible to install the above alfa card on mac os x 10.7.4?
View 2 Replies View RelatedI would like to learn how to install an OS like XP or linux over the network.
View 2 Replies View RelatedI am looking for the appropriate procedure for connecting an external HDD to a D-Link router with a USB 2.0 port. I am told I need to create a TCP/UDP 19540 port on my system.
View 1 Replies View RelatedI have had my new computer up and running for 2 days amd have installed 2 games but i couldnt connect to the internet because my driver installation cd says "D: is not a valid win32 application" when i try to run it and i dont know what to do i have tried resetting cd to defaults, installing manually by going in to cd files and have tried running in safe mode but nothing works .i have windows 7 home premium 64 bit OS
View 3 Replies View RelatedI'm installing WIFI for my personal business, and want to make sure my server and modem are unaccessable by WIFI users. I have the modem set to 192.168.1.1 and router(wifi) to 10.0.0.1. The problem is i can still type in 192.168.1.10 (server's ip address) or 192.168.1.1 while on WIFI and i get can still get to both.
View 2 Replies View Relatedall the drivers required to connect to the Internet wireless,,
View 1 Replies View RelatedTrying to upgrade a pair of ACS servers from 5.2.0.26 base to patch 4. I have tried creating different repositiories that are SFTP, FTP, and Local. The secondary unit(ROTACS2) upgraded fine with no problems the primary(ROTACS) will not, see below.
Cisco Application Deployment Engine OS Release: 1.2ADE-OS Build Version: 1.2.0.182ADE-OS System Architecture: i386
Copyright (c) 2005-2009 by Cisco Systems, Inc.All rights reserved.Hostname: ROTACS
Version information of installed applications---------------------------------------------
Cisco ACS VERSION INFORMATION-----------------------------Version : 5.2.0.26Internal Build ID : B.3075
ROTACS/mpartain#
[code]....
It appears that the GPG key is not vaild on this primary server. The patches are in the repositories and I used the acsrepo repo to install on the ROTACS2 secondary server.I have looked through articles and the only mention is to not use TFTP, which I am not. I have also tried to apply patches 1-3 with the same results.
I'm having problems installing LMS 4.2 in other partition. I have two operating system. One on C: Windows 7 Pro and One on D:Windows Server 2008,after installing it on Windows Server 2008, i'm able to access the server using the command net start crmdmgtd; but if i restart my machine it gets and error (blue screen) and says: Could not find ntdll.dll in the dynamic library. NTSerializeboot.
View 1 Replies View RelatedI built a new Win2k8 server meeting all prereq's. This is a new install of LMS. Right at the beginning of the install process, i get this error and the install halts.
View 2 Replies View RelatedI know a ip from a thing without being connected? I'm working yhe.. now I can't access physical to pc because its implanted in some officce wall but i knwo its log on in net service... the only thing i want its to find the ip from it like magic I dont know
View 2 Replies View RelatedI am running 802.1x using a cluster of ACS 5.2 appliances and Windows XP hosts using EAP-MSCHAPv2 over a PEAP tunnel.The PC are set to perform machine authentication and if authentication is successful,they are mapped to a specific VLAN based on their AD group memberships.The problem that I am encountering is when the machine password expires while a user has their laptop off the LAN. When they bring the laptop back to work and put it on the LAN, authentication fails and the laptop does not run through the authorization policy to determine what action to take. Looking at the microsoft site, I found this:
http:[url].....
This basically states that Microsoft is aware that Windows XP is not able to change machine passwords on login after the expiry period. They offer two solutions for a workaround:
1. Use EAP-TLS - I don't want to use certificates for machine authentication due to PCs dropping off the network when they are renamed due to the PC name on the certificate not matching the PCs actual name
2. Perform user based auth - Windows XP doesn't pause the netlogon process during bootup, therefore if the user VLAN changes when user authentication is performed, all statup scripts will fail.
This brings me to trying to perform a workaround directly on the ACS appliances after authentication fails.I have an access service setup that matches any machine authentication packets from PCs configured for machine based authentication.This service then maps the VLAN upon successful authentication. Since the authentication will not be successful, the process will fail before getting to the authorization policy.I have looked into forcing the policy to continue upon failure, however this advanced option is not available for PEAP authentication.Now,I am trying to determine if there is anyway to perform VLAN mapping for a host that fails machine authentication using a rule based result selection on my identity policy for the machine authentication, but this is not working. There really needs to be a way to force a policy to continue processing even when authentication to the domain fails for PEAP authentication.
I manage the network of a small (120 users) network spread out over 5 sites within a 10 mile radius (for normal ops- extended ops can expand to include other cities).I think I'd call that a Campus LAN, perhaps it's just a really small MAN (for normal ops)...I am starting my CCENT/CCNA track so this may be blazingly obvious to some of you- but I'm sure to learn something either way...Every now and again we have to go find "hostname "X"" for an update that won't roll out by way of our (Server Sr SysAdmin's) tools, so we actually have to put hands on it. Unfortunately the prior admins didn't document the inventory to such a level that we know "laptop_015" is in the building down by the college.
I DO have documentation on my equipment (I'm the Network Sr SysAdmin) that I have rolled together over the last 9 months being here...I have a Cisco 5520 ASA, and use ASDM to manage it. What would be extremely handy would be the ability to put a query in the system to report back what switch a given hostname is plugged intoBetter yet, if it could tell me switch and switchport.I imagine this would be simple if I had the MAC address- there's got to be a way to grep the switches for a given MAC- but not sure if it'll work in a similar fashion for ARP lookups.
how to get mac address of linux machine using vb6 programming
View 1 Replies View RelatedI have a PC behind a DSL router. In my PC (WinXP SP3) I have a virtual machine also running WinXP SP3. I would like to access the VM via remote desktop. Since I have a dynamic IP, I use the(url)tool to solve the problem. I installed the no-ip sync tool in the VM. Now when I write my no-ip address in the remote desktop from my office, I will access my host system, and not the hosted VM. Does any knows how I should configure things in order to get access to the virtual machine and not to the host machine
View 5 Replies View Related
