Fax Machine That Operate Without A Landline?
Jan 30, 2012Are there any fax machine that operate without a landline
View 1 Replies
ADVERTISEMENT
2 DSL ATT Modems Work On 1 Landline?
Aug 21, 2011I have ATT 2wire DSL but the range sucks, can I hook up a second one on the same phone line at the other end of my house?
View 3 Replies View RelatedLandline Phone Disconnects Router When In Use?
Apr 9, 2013I had my phone companys old westtell router that they sent when our Town first went wireless back in 05-06 this past nov. I contacted the phoneCompany about having to reset the westell often. They were shockedI still had the old router and said i needed the new one and promply sentThis comtrend they supply and ever since i have this new comtrend whichThey even switced out once the below problem has beenoccurringOn a regular basisPhone company has come twice first time moved phone base awayFrom router seemed to work for awhile. Then it started again 9 weeksLater this time said the phones must be the same gigahertz as the routerAand to plug in an old style phone not a wireless handheld. Nothing they
View 11 Replies View RelatedSevere % Dropped Packets On XP Machine When Windows 7 Machine On Network Not Switch
Aug 2, 2011I have a strange error on my home network that I cannot find a solution to.I have an Huawei SmartAX MT882 from TalkTalk acting as a modem connected to a D-Link DSL-G624T acting as a router/switch. Connected to the D-Link I have a Windows 7 Pro machine (64-bit, SP1) and an XP (home i think) machine (sp 2 i think).The SmartAX modem is set up to perform DHCP and DNS relaying and the D-Link has DHCP turned off and DNS relay turned off.The Win7 machine can access the network, get an IP address and access the internet without problems, regardless as to the status of the XP machine.The XP machine can access the network, get an IP address and access the internet with no problems ONLY of the win7 is powered up. When the win7 machine is off, the XP machine seems to drop about 25% of the ping packets between it and the D-Link router and has no internet access (because of this i assume). [code]
View 8 Replies View RelatedInstalled Network Printer On Windows 7 Machine / Now XP Machine Won't Print To It
Jul 20, 2011New Win-7 machine set up. I used the printer set-up wizard to install a networked printer in the new machine with absolutely no problem. Proved it would print from that machine.Now, I get a call informing me that her old XP machine, which had been printing to the network printer with no problems, will no longer print.Documents go into the print queue, but they don't get printed.No error messages show up.I did some messing around via remote access, and finally removed the printer with the intention of reinstalling it.Scanning for network printers turned up several redundant instances of the same printer with different names. Some are identified as "invalid" some a "access denied". Bottom line. I can't get any of the selections to install.On the Win-7 machine I did find a window that indicated that the printer is designated as being shared, but I didn't explicitly set it for sharing when I installed it. Also, I somehow got to a window that told me that for printers that were to be shared with other versions of windows I could optionally install drivers to support such machines. Didn't have the driver disk handy and took the window down. Now I can't even find it again.I need sorting this all out.Part of the problem is that out there in "network land" there are redundant remnants of previous installations that are being remembered inappropriately.
View 11 Replies View RelatedDSL Modem ZXDSL - Possible To Make Landline Calls Through Computer
Oct 22, 2011I have a DSL connection and obviously it coming through the phone line. Is there any kind of software that I can use to make landline calls through my computer? The DSL modem is ZXDSL. I know I can use Skype, vBuzzer and Google Talk etc etc. But I want to make calls through my landline using my computer or laptop.
View 11 Replies View RelatedBelkin Routers :: F7d4302 V1 - Wifi Disconnecting With Use Of Landline?
Mar 30, 2013For some reason, wireless connections from my moms Belkin Play router #F7D4302 v1 disconnect everytime the landline phone is used! There is no phone line connected to my moms computer, modem or router
View 3 Replies View RelatedRouters / Switches :: Connect Landline Phone To Use As Talkback On Radio?
Jan 12, 2012how to connect landline phone to use as talkback on my radio
View 1 Replies View RelatedWindows 7 Machine Does Not Detect Win Xp Machine
Apr 29, 2012I have a network problem. My windows 7 machine is not detecting win xp machine whereas win xp machine is detecting win 7 machine. They are in the same workgroup named Home. And the networking system is set to work. I have left the homegroup I was previously in. I enabled file sharing for devices that use 40 bit and 50 bit encryption. On XP I have enabled NetBios over TCP/IP. File sharing is enabled on both computers. I think it's something obvious as both instalations on different computers are really fresh and both windows haven't been tampered with.
View 12 Replies View RelatedCisco Wireless :: AP 1142 - Operate With WLC
Jul 8, 2012I have Cisco AP 1142 standalone and I want this one to operate with WLC.
I have searched in Google, they said I need to upgrade AP1142.
I don't know how to upgrade it.
Operate A Website From A Shared Internet Connection?
Mar 26, 2012I am designing a network internet connection to our 20 apartment block. The WAN is Ultima up to 40mb/s and the take up is expected to be modest in terms of throughput. However I have been told that two apartments want to run their own non commercial web sites which currently operate on adsl with ddns provision from TZO. The netgear vdsl router supplied by the ISP will obviously have port forwarding but how do I cater for more than one LAN destination requiring port 80 traffic??Surely I dont have to have an in-block DNS.
View 6 Replies View RelatedObtain The Security Key To Allow Computer To Operate Internet?
Jan 23, 2011I have forgotten my security key in order for my new computer to connect to the internet wirelessly. What is the easiest way to find that security key?
View 1 Replies View RelatedOperate The Internet Wirelessly On The Television Monitor?
Feb 9, 2013I would like to operate a design program and have access to the internet on a 32 inch television wirelessly from my laptop. What do I need?
View 1 Replies View RelatedRealtek RTL8168D - How To Operate At Gigabit Speeds
Sep 1, 2011I recently said to hell with wireless and wired my apartment with Cat6. My desktop computer next to the router is running fine at 1Gbps. My media center one room over is only running at 100Mbps, and I cannot figure out why.
The motherboard has a Realtek RTL8168D . I have green ethernet enabled... could that be it? Auto disable gigabit is disabled. I tried changing speed & duplex from Auto to 1Gbps, and that didn't change anything. The latest driver is installed. Their ethernet diagnostic utility shows the link speed at 100.
Linksys Wireless Router :: WRT160N-SG - Unable To Operate
Oct 18, 2011I selected: Static IP
Static IP:192.168.0.100
Subnet: 255.255.255.252
Gateway:192.168.0.1
DNS: 60.49.166.105
I am a Malaysian, using Streamyx here, I search some articles shows that the ISP given is 60.49.166.105 or 60.49.166.106. Am I right in the setup? Why I am still unable to online though successful to connect after the setup configuration?
Cisco AAA/Identity/Nac :: Can Operate Simultaneously Multiple External DB In ACS 4.2
Jan 24, 2012Can operate simultaneously multiple external DB in ACS 4.2?Mutiful External DB server is AD and Token server
View 1 Replies View RelatedCisco Switches :: ESW-500 / SPA525G CDP - Operate Differently Between Phones?
Aug 8, 2010I have an ESW-500, a SPA525G (also tried 504G), Polycom IP330/670 phones, and a Switchvox (Asterisk-based IP-PBX) and CDP causes some issues.Both the SPA5xx and Polycom phones support CDP but it appears to operate differently between the phones. And, surprisingly, worst of all on the SPA's.
In short:
* Switch - CDP enabled (VLAN 100), DHCP disabled (Option 82 enabled) which is basically how it comes out of the box
* Polycom phones - CDP enabled (default)
* Cisco phones - CDP enabled (default)
* DHCP/TFTP server on port 1
* Phones on ports 7,15,19 - default as smartports for Desktop & Phone
* Switchvox on port 17 - port configured as General (not Trunk) with 1U & 100U VLANs. This was required to get Polycom phones to appear in Switchvox config
With that configuration the Polycom phones work perfectly. They appear in the switch web-GUI under CDP, they present in Switchvox and can be configured.But with that configuration although the Cisco phones appear in the CDP screen they do not get DHCP. My DHCP server can see 'DHCP Discover' messages but it just goes around in circles. Disabling CDP on the switch will allow the phone to get an IP but disabling CDP on the phone still has the same problem. When I saw "around in circles" this is what I mean....
Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:25:84:06:12:46 [10/08 13:51:27.031]
DHCP: proposed address 192.168.100.16 [10/08 13:51:29.000]
4064 Request 2 not processed [10/08 13:51:29.062]
Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:25:84:06:12:46 [10/08 13:51:30.093]
DHCP: proposed address 192.168.100.16 [10/08 13:51:31.593]
4064 Request 2 not processed [10/08 13:51:31.656]
[code]....
With the difference being there's a 'DHCP Inform Msg' which there never is from the Cisco.I have tried many options regarding DHCP Relay, DHCP Server addresses, DHCP VLAN Interfaces, smartport settings etc but with CDP enabled the Cisco phone just will not get DHCP.
Linksys Cable / DSL :: WAG 320N Why Can't Both Modems Operate Wired And Wireless
Nov 6, 2012I have my broadband line feeding into a WAG 320N in an outside room. There are computers in the outside room which are wired to the modem via CAT leads & plugs. Wireless is turned on, but is not currently being used in this room, as the wired connections work fine. From this outside room there is an underground cable (12 metres) to the house, which through a CAT lead is plugged into another WAG 320N, which operates primarily wirelessly, so laptop computers can be used in the house wirelessly. When the outside room modem is turned on AND the house modem is turned on, only one modem OR the other can access the internet, NOT BOTH. Why can't both modems operate wired and wirelessly. What is the problem? Is there a conflict between the two wireless signals? Can/ should I turn off the wireless signal from the outside modem (if so HOW?) . OR is there a way I can have both modems transmitting a wireless signal.
View 1 Replies View RelatedLinksys Wireless Adapters :: Any Driver Which Can Operate WUSB600N V2 Under Windows 98
Jun 20, 2011I'm looking after any driver wich can operate the WUSB600N v2 under Windows 98 at an old computer who is not able to operate with WinXP.Is any "freak" there who knows wich driver can be used for it? (Perhaps as well an older driver from any other older CISCO wlan stick ... ?)
View 2 Replies View RelatedCisco Switching/Routing :: 6509 How Does Spanning-tree Operate
Mar 21, 2012..I am connecting a Nexus 5K to a 6509 without VSS. Is the recommended configuration just straight etherchannel? Since the 6509 cannot do vpc, is an etherchannel the best way to configure this uplink? How does spanning-tree operate.
View 3 Replies View RelatedCisco :: Operate Both Prime Fulfillment 6 AND LMS 4 On Single Solaris 10 Server?
Feb 22, 2012Is it possible to easily operate both Prime Fulfillment 6 AND LMS 4 on single Solaris 10 server?
View 1 Replies View RelatedCisco WAN :: 2921 Handle 100mbps Connection Plus Operate BGP With Partial Updates
Mar 1, 2013Can a Cisco 2921 handle a 100mbps connection plus operate BGP with partial updates? I am worried about the CPU.
View 5 Replies View RelatedCisco Wireless :: 3500 - Any Door Access Point Which Can Operate In Very Low Temperature
Feb 23, 2011Recently i have visit some site for survey of wireless (WiFi). My client ask to provide the Access Point inside the Cold storage of factory( For RF scanners) The temperature of the place is -25 C to -30 C. I have go throug the wireless option of cisco like 1200 series, 1100 series, 3500 series, but all of these operate maximum of -20C. while only out door access point ( cisco 1500 Series ) support such low temparture.
View 13 Replies View RelatedWRT160N - Wireless Router Gives Landline Internet But No Wireless
Mar 11, 2011I have a Linksys Wireless-N Broadband Router Model No. WRT160N. I have had it since 2008; therefore, the warranty is expired and Linksys refused to give me tech support over the phone. Here's the problem:
It is not giving off a wireless signal. It works as a router just fine. I have my landline ethernet cable coming into it, and then a cord going to my desktop and a cord going to my laptop and the internet works fine. However, it give off no wireless signal.
I tried resetting to factory settings and that did not work. I've attached a pic of the router when it's turned on. You can see the middle button is Orange and the wireless icon is not lighted at all.
Linksys Wireless Router :: E4200 - Unable To Operate Wireless Devices?
Feb 23, 2012I have a E4200 router. The firmware version is 1.1.02. I am reluctant to upgrade; however, my iMAC is picking up the 5GHz broadcast setting, but the rest of my wireless devices only recognize my lower 2.4GHz setting. I have changed channels, my router address is changed because it conflicted with my Verizon DSL. I do not have FIOS. What can I do to fix this problem. I have an ipad, 2 iphones, 2 ipod touches, 2 laptops (PCs), an XBOX, and a PS3 that needs to connect to a higher broadcast. The connections are slow and at times get dropped.
View 4 Replies View RelatedInstalling OS From Another Machine CD-ROM
Jan 25, 2012I want to install a windows operating system in my machine but my machine dont have a CD-ROM. so i want to install an OS from using my another PC(Laptop)'s CD-ROM. So is it possible to install OS into my one machine from another different machine(windows-7) via sharing the drive .
View 4 Replies View RelatedCan't Use IP On Virtual Machine
Jun 7, 2012I am trying to configure a NIC IPv4 with IPv6 disabled on a virtual machine (win server 2008)The instructions I got say that I need to use IP 192.168.210.0/24.However when I enter this IP and use subnet mask 255.255.255.0 I get the following error. Why this is and if there is a way to resolve the error?
View 3 Replies View RelatedMultiple Connections To A Machine?
May 17, 2011I am working on a project at my company. In short, there is one PC in the office to which other user must remotely connect to perform certain tasks. The stuff they do must be done from the machine with the specific IP, the IP of that machine, as this is specified in agreements with the companies we work with. So far, we have been using Remote Desktop (our machines are Windows-XP-based PC's), but this is quite annoying when more than one person needs to use the machine at the same time
View 3 Replies View RelatedWay To Move Packet From One Machine To Another
Feb 23, 2011If i want to send a packet from one host to another host through a router, how will the packet be sent? I mean what are the stages that a packet can reach to the destination.
View 6 Replies View RelatedNetworking XP With Windows 7 Machine
May 4, 2012I am trying to link a Windows 7 machine with a laptop running Windows XP. The workgroup on both computers is the same. On the Win7 machine, I have a couple of folders set to be shared. The first is the C Drive and the share name is C-drive. The second is Quickbooks that I have named Quickbooks. On the XP machine, I went to map network drive and in the blank typed \Remote1C-drive. It asked for username and password and just like that we were connected. But I can't see all of the files on this drive. I don't even see all of the folders - one of which is Quickbooks. So I tried \Remote1Quickbooks and Windows XP couldn't find that path even though I'm positive that folder is shared on Win7. So no matter what I try, I can't see this folder on the XP machine, I even tried copying this folder to other locations around the computer and setting up shares in hope that something would work, but it never did. So I went back to the C Drive share on the XP machine. I tried to go in reverse, creating a file and putting it on the root of the c drive (I did this on the XP machine, but the file should have actually been located on the Win7 machine. When I check Win7, the file didn't exist. So I tried the other way. I right clicked on the c drive in Win7 and created a new bitmap image file. Back to the XP laptop, that file doesn't show. But if I look at the c-drive on Win7 from the xp machine, I see several other folders and some of them like Program Files contains actual files. But some of them are just empty such as \Remote1C.
View 6 Replies View RelatedCommunicate To Machine On A Subnet With Another On B
Dec 2, 2011I have two routers in my office, each one having wireless extensions and its own DSL connection.I want machine on A subnet communicate with machine on B,I'll need some sort of physical connection (a cable? a new device?).Router A and B are typical home router with wifi extension: they only have a WAN port,I won't be able to let them talk to each other simpy by plugging an Ethernet cable between two LAN ports, since the two routers are on different subnets.
View 4 Replies View RelatedRDP Without VGA Driver On Host Machine?
Jul 8, 2012Basically, I am swapping my Atom/ION nettop (that I use as a file server, game server, torrent server etc. etc.) for one that has no fans and no mechanical HDD. I control it primarily via RDP, so I don't need to plug a keyboard or display into the nettop itself.
The new one I'm getting should be a step up due to the whole no moving parts thing, as well as the much faster CPU. But Intel, in their infinite wisdom, have not provided (and don't plan on providing) a 64bit graphics driver for the GMA 3650.
If I were to install 64bit Windows on this new machine without installing a driver for the graphics, would I have any issues using RDP? I'm not sure if the visuals are generated on the host or the client and whether it would matter either way.
Add Two Dial Ups In A Single Xp Machine?
Jan 4, 2012i have one xp machine. i wnd to configure two different dial up connection in one xp machine for band width sharing.
View 1 Replies View Related