Operate The Internet Wirelessly On The Television Monitor?
Feb 9, 2013I would like to operate a design program and have access to the internet on a 32 inch television wirelessly from my laptop. What do I need?
View 1 Replies
ADVERTISEMENT
Use TV As Extended Monitor Wirelessly?
Aug 11, 2012I have a sony bravia tv that has wifi and supports dlna. And I have a desktop in another room, running windows xp. Since they both connected to the same network, is it possible to use the tv as another screen for the pc?( duplicate the screen, whatever i do on the pc will be shown on the tv screen) I'm installing a software that might stream content from the pc to the tv, but then i'm not hoping too much on it because the tv seems to be very picky about fCPUile formats... so i figured somehow duplicating the screen would be best if all else fails i'll just hook up the CPU to the TV.
View 1 Replies View RelatedOperate A Website From A Shared Internet Connection?
Mar 26, 2012I am designing a network internet connection to our 20 apartment block. The WAN is Ultima up to 40mb/s and the take up is expected to be modest in terms of throughput. However I have been told that two apartments want to run their own non commercial web sites which currently operate on adsl with ddns provision from TZO. The netgear vdsl router supplied by the ISP will obviously have port forwarding but how do I cater for more than one LAN destination requiring port 80 traffic??Surely I dont have to have an in-block DNS.
View 6 Replies View RelatedObtain The Security Key To Allow Computer To Operate Internet?
Jan 23, 2011I have forgotten my security key in order for my new computer to connect to the internet wirelessly. What is the easiest way to find that security key?
View 1 Replies View RelatedGet My Television To Recognise My Computer
Jan 22, 2012i have purchased a sony 3d tv with wi fi, wi fi works fine. firstly cant get my tv to recognise my computer at r all using hdmi lead tv but does not see comp at all have a sony vaio comp.the tv does recognise it on home network but when i try and keeps saying cannot access server
View 1 Replies View RelatedHow To Connect Laptop To A Television
Jun 3, 2011Am having trouble connecting my laptop to my television set.I enjoy watching movies but watching too many on my laptop is inconvenient so wanted to check if there is a way to connect laptop to tv and continue them.I have the following ports on tv and laptop.
View 3 Replies View RelatedConnect Router To Panasonic Television To Watch Iplayer?
Jan 24, 2011How do I connect my broadband router to my panasonic television to watch iplayer
View 4 Replies View RelatedConnect From External Hard Drive (USB 2.0) To Television HDMI Hub?
Feb 19, 2011How to connect from external hard drive (USB 2.0) to my television HDMI hub? my television doesnt have USB 2.0 hub
View 3 Replies View RelatedFax Machine That Operate Without A Landline?
Jan 30, 2012Are there any fax machine that operate without a landline
View 1 Replies View RelatedCisco Wireless :: AP 1142 - Operate With WLC
Jul 8, 2012I have Cisco AP 1142 standalone and I want this one to operate with WLC.
I have searched in Google, they said I need to upgrade AP1142.
I don't know how to upgrade it.
Getting Monitor Browser's Internet Usage?
Mar 9, 2011In the company I work for, employees' internet traffic is monitored, and if you download too much, you get a warning, and later there might be more serious consequences. But they don't tell how many kilobytes are too much, and they also don't tell, how much of your "kilobyte budget" you have spent already. So I want to be able to monitor my own internet activity. However, all the programs I found so far watch the whole traffic going through the network card, which, beside the internet usage, includes LAN and mail server communication, which don't count. So, I'm looking for a free portable program that can monitor specifically my browser's internet usage, i.e. the number of kilobytes sent and received by the browser application. It is imperative that the program should be portable, or at least installable without administrator privileges, because I don't have that.
View 2 Replies View RelatedOptions To Monitor Internet Traffic?
Feb 23, 2011ISP has recently announced that they are going to start charging $1 for every GB that their customers go over their monthly limit. i have a 100GB/mo package and i figure that's sufficient for my habits which consist of approx 40GB of torrents, a bit of skyping, bit of browsing, etc. my ISP makes usage graphs available online, when i checked earlier last month to confirm i'm staying under my 100GB limit the graphs said over the past 12 months the highest i topped was 90GB, usually in the 70's. pretty much what i expected. but when i check their usage graphs again recently it says i've been using over 400GB for the past 3 months straight (as far back as the new graphs go). i call BS and find it very suspicious that my internet usage magically quadruples the same time my ISP wants to start charging for overusage, especially retro-active.
anyhoo, i want to somehow monitor my internet traffic usage independently but i'm not sure the best way to go about it.my home network is the typical modem -> router -> LAN.my router is a new netgear wndr3700, it has a traffic meter built in, but considering it's only forms of notification is cutting the internet off altogether or changing a green blinking LED to and orange blinking LED when the defined limit is reached, it's kinda useless. i just got it a couple months ago too, so buying a new router with better traffic monitoring isn't an option.i could put a net meter on each and every computer i have, then sum up their usage stats, but that would be a pain in the ass and wouldn't take my PS3 or WDTV media player into account, as little as they're used online.my prefered solution is to use an old laptop i hardly touch anymore and set it up as a gateway and share the internet connection or make it a proxy server. that way i could set up a net meter on just the one NIC on that to track my internet usage. modem -> laptop -> router -> LAN. the problem i have hear is forwarding ports from one NIC to the other so they can then get ditributed by the router, never tried this before, not sure how to go about it. right now it has XP home, but i can put 7 on it if that's better to work with.
Realtek RTL8168D - How To Operate At Gigabit Speeds
Sep 1, 2011I recently said to hell with wireless and wired my apartment with Cat6. My desktop computer next to the router is running fine at 1Gbps. My media center one room over is only running at 100Mbps, and I cannot figure out why.
The motherboard has a Realtek RTL8168D . I have green ethernet enabled... could that be it? Auto disable gigabit is disabled. I tried changing speed & duplex from Auto to 1Gbps, and that didn't change anything. The latest driver is installed. Their ethernet diagnostic utility shows the link speed at 100.
Home Internet Bandwidth Usage Monitor?
May 6, 2011I have 4 laptops (WiFi), 2 desktops (LAN), xbox (LAN), and dish receiver (LAN) that are all connected to the internet using the method between the brackets. Recently i am running out of bandwidth, and what i am looking for is a freeware that i can install in one of the computers that could tell me which IP or MAC address used how much internet.I have read several articles: some articles point me to softwares which only monitor the computer that they are installed. Other posts argued that such thing can only be done through the main router. I know my router doesn't have such feature. I use SMC router.
View 3 Replies View RelatedBroadband :: Monitor Internet Usage Through Home DSL?
Nov 17, 2012I am trying to figure out how I can see what my monthly total bandwidth usage is. I have been trying to find a way to monitor my internet usage so I can make an informed decision on ISPs. one has a cap but allows ESPN3, the other is the opposite on both accounts. everything I have been finding look like good products however they all look like they are for an individual device. I have about ten devices and not all would have the ability to have these programs on them. I have and old xp machine that really is only good as a paper weight, If I had to I could make it a proxy but before I do that and create a major bottleneck I wanted to see if there were any other options
View 1 Replies View RelatedTools To Monitor Internet Usage Of Network?
Jul 21, 2011I would like a free tool that would moniter the internet usage of our network. it has about 20 computers and would like the following features: be able to show the usage of each computer the type of usage, ie, browsing, downloading, streaming a total usage Is there such a free program? would Microsoft Network Monitor 3.4 be able to do the trick if i learnt how to use it?
View 1 Replies View RelatedMonitor Internet Activity On Wireless Router?
Feb 17, 2011I recently received an email from my internet provider showing illegal movie downloads through my modem. I have a wireless router hooked up (with password security) for my roommates to use and would like to monitor their internet activities to know who is downloading these movies.
View 3 Replies View RelatedMonitor Internet Usage On A Wireless Network?
Apr 27, 2012we have a high speed internet and my modem is capable of wireless what I want to know, is there a way that I can monitor how much my daughter is on her computer and what websites she is visiting without having to install a program on her notebook or having to check her history etc? I would like to be able to do it all from my computer
View 2 Replies View RelatedLinksys Wireless Router :: WRT160N-SG - Unable To Operate
Oct 18, 2011I selected: Static IP
Static IP:192.168.0.100
Subnet: 255.255.255.252
Gateway:192.168.0.1
DNS: 60.49.166.105
I am a Malaysian, using Streamyx here, I search some articles shows that the ISP given is 60.49.166.105 or 60.49.166.106. Am I right in the setup? Why I am still unable to online though successful to connect after the setup configuration?
Cisco AAA/Identity/Nac :: Can Operate Simultaneously Multiple External DB In ACS 4.2
Jan 24, 2012Can operate simultaneously multiple external DB in ACS 4.2?Mutiful External DB server is AD and Token server
View 1 Replies View RelatedCisco Switches :: ESW-500 / SPA525G CDP - Operate Differently Between Phones?
Aug 8, 2010I have an ESW-500, a SPA525G (also tried 504G), Polycom IP330/670 phones, and a Switchvox (Asterisk-based IP-PBX) and CDP causes some issues.Both the SPA5xx and Polycom phones support CDP but it appears to operate differently between the phones. And, surprisingly, worst of all on the SPA's.
In short:
* Switch - CDP enabled (VLAN 100), DHCP disabled (Option 82 enabled) which is basically how it comes out of the box
* Polycom phones - CDP enabled (default)
* Cisco phones - CDP enabled (default)
* DHCP/TFTP server on port 1
* Phones on ports 7,15,19 - default as smartports for Desktop & Phone
* Switchvox on port 17 - port configured as General (not Trunk) with 1U & 100U VLANs. This was required to get Polycom phones to appear in Switchvox config
With that configuration the Polycom phones work perfectly. They appear in the switch web-GUI under CDP, they present in Switchvox and can be configured.But with that configuration although the Cisco phones appear in the CDP screen they do not get DHCP. My DHCP server can see 'DHCP Discover' messages but it just goes around in circles. Disabling CDP on the switch will allow the phone to get an IP but disabling CDP on the phone still has the same problem. When I saw "around in circles" this is what I mean....
Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:25:84:06:12:46 [10/08 13:51:27.031]
DHCP: proposed address 192.168.100.16 [10/08 13:51:29.000]
4064 Request 2 not processed [10/08 13:51:29.062]
Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:25:84:06:12:46 [10/08 13:51:30.093]
DHCP: proposed address 192.168.100.16 [10/08 13:51:31.593]
4064 Request 2 not processed [10/08 13:51:31.656]
[code]....
With the difference being there's a 'DHCP Inform Msg' which there never is from the Cisco.I have tried many options regarding DHCP Relay, DHCP Server addresses, DHCP VLAN Interfaces, smartport settings etc but with CDP enabled the Cisco phone just will not get DHCP.
Can't Connect Wirelessly To Internet
Mar 27, 2011I came home last night and both my internet name and password were changed. I accessed the modem's website and changed both. I then hit connect to internet. My xbox worked, but none of my laptops. This morning I reset all the modem and the laptops. All of them connect but the internet is slow and fades in and out. My xbox tells my my NAT type is moderate. I go back on the modem's website and it says that none of my wireless devices can connect.
View 2 Replies View RelatedCan't Connect To Internet Wirelessly?
Sep 27, 2012I have an HP dv8t and can't connect to the internet wirelessly. I run windows network diagnostics and result says Problem with wireless adapter or access point. Not fixed how can this be fixed?
View 1 Replies View RelatedConnecting To The Internet Wirelessly
Mar 27, 2011I have the 2wire Gateway modem to connect to the internet on my HP all-in-one desktop computer, which I bought a little over 3 years ago. Occasionally, the computer will show that the internet is disconnected, however the modem will have all it's lights flashing. After attempting several times to get to connect again, I called the support number, and they told me that I would either have to the ethernet cord hooked to the computer or purchase a network adapter. BUT my computer already had a network adapter installed in it before I even bought it, so I don't feel that I need to purchase one and I was able to get it to connect to the internet wireless by myself after hanging up. My question is how to keep my computer from wanting to disconnect from the wireless internet?
View 2 Replies View RelatedSoftware To Monitor Internet Connectivity Through Wireless Router
Jul 1, 2011I have a cable modem with a wireless router attached.There are 2 laptops that connect to the internet via the router. I've never been able to get the hard wired desktop to connect to the internet via the router, so, when the desktop is used, the router is disconnected from the modem and the desktop is connected.I do not have free access to the modem, router or desktop devices, but I do have free access to the 2 laptops.I would like to be able to install on one of the laptops, something that would keep track of the internet connectivity.
I know that even when the router is disconnected from the modem, it is still sending it's wireless signal (most likely) but it's not connected to the internet anymore.So, I would like to be able to know the date and time the router looses internet connectivity and the date and time it gets the connectivity back every time this happens.I would love to be able to monitor the activity that takes place on the internet during that time frame, but know it's not possible when all I have access to is a wirelessly connected laptop that would lose the internet connectivity. So, it would be good just to be able to know when the router is disconnected and how long it is disconnected.
Linksys / Cisco WRT 120N - Monitor Internet Usage In LAN?
Feb 7, 2013I have a small Network at my office, all done by myself with my limited knowledge. I have 9 systems connected thru physical LAN and 1 laptop connected through Wireless (from my internet router)I have distributed the internet connection openly, not using a proxy server. Anyone plugs in will get Internet on their system through the DHCP.Recently I found that internet usage been crossing the limits.sniff/monitor internet/bandwidth usage system wise.I have a internet router (Linksys/Cisco WRT 120N) from which the cable goes to an un-managed 8 port switch.I have three different areas in my office, so I pulled single cable to each of these areas and there I used another un-managed 8 port switch to distribute the LAN to the systems.
View 3 Replies View RelatedE4200v1 - Monitor Home Network / Internet Bandwidth?
Apr 7, 2013I'm wondering if there is an easy way to monitor how much bandwidth is being consumed at any given moment for a home network.specifically, for the incoming/outgoing internet connection.My network is as thus:
DSL Modem -> Wifi Router (Linksys E4200v1 - PPPoE enabled here) -> Gigabit switch -> 2nd Wifi router (D-Link DIR-815 - DHCP disabled, repeats same SSID and password)
Most devices are connected directly into the switch, with one computer hard-plugged into the DIR-815 (I will eventually change this, as the 815 only has 10/100 ports).Basically, I want to easily be able to check how much up/down data is being sent for my internet connection. This means that I cannot use a program on a computer (I've used DL Meter before. Works great, but limited to a single computer).
The Linksys E4200v1 is using standard firmware, but I'm not opposed to loading DD-WRT onto it (was the original plan anyway, just never got around to it), if DD-WRT has this capability.Nice to have feature: Ability to see which devices are consuming what part of the bandwidth. Not necessary, but would be a cool feature.Alternatively, if there is a cheap (like $100 or less deal) box that can interface, say, between the E4200 and the switch, that can do this, that would work as well.
Linksys Cable / DSL :: WAG 320N Why Can't Both Modems Operate Wired And Wireless
Nov 6, 2012I have my broadband line feeding into a WAG 320N in an outside room. There are computers in the outside room which are wired to the modem via CAT leads & plugs. Wireless is turned on, but is not currently being used in this room, as the wired connections work fine. From this outside room there is an underground cable (12 metres) to the house, which through a CAT lead is plugged into another WAG 320N, which operates primarily wirelessly, so laptop computers can be used in the house wirelessly. When the outside room modem is turned on AND the house modem is turned on, only one modem OR the other can access the internet, NOT BOTH. Why can't both modems operate wired and wirelessly. What is the problem? Is there a conflict between the two wireless signals? Can/ should I turn off the wireless signal from the outside modem (if so HOW?) . OR is there a way I can have both modems transmitting a wireless signal.
View 1 Replies View RelatedLinksys Wireless Adapters :: Any Driver Which Can Operate WUSB600N V2 Under Windows 98
Jun 20, 2011I'm looking after any driver wich can operate the WUSB600N v2 under Windows 98 at an old computer who is not able to operate with WinXP.Is any "freak" there who knows wich driver can be used for it? (Perhaps as well an older driver from any other older CISCO wlan stick ... ?)
View 2 Replies View RelatedCisco Switching/Routing :: 6509 How Does Spanning-tree Operate
Mar 21, 2012..I am connecting a Nexus 5K to a 6509 without VSS. Is the recommended configuration just straight etherchannel? Since the 6509 cannot do vpc, is an etherchannel the best way to configure this uplink? How does spanning-tree operate.
View 3 Replies View RelatedCisco :: Operate Both Prime Fulfillment 6 AND LMS 4 On Single Solaris 10 Server?
Feb 22, 2012Is it possible to easily operate both Prime Fulfillment 6 AND LMS 4 on single Solaris 10 server?
View 1 Replies View RelatedAfter Each Startup Can't Connect Wirelessly To Internet?
Sep 8, 2012My hp pavilion g6 has always had the problem of not connecting to internet after i restart it. It shows excellent signal but cant connect to internet. This has been the case on two different routers/modems with two seperate service providers, however the problem gets fixed by turning off then back on the modem/router.
View 8 Replies View RelatedDesktop Won't Connect To Internet Wirelessly
Mar 17, 2012Now I decided to switch my desktop to hdmi after doing that the cord was affecting my wireless antenna so I took it out and put it in the other wireless antenna spot while it was on now everytime I try to connect it says the password is wrong or theres something wrong with the router everything else connects I have a dell inspiron 620 desktop and a Begin.91Bb modem/router
View 2 Replies View Related