Cisco :: Operate Both Prime Fulfillment 6 AND LMS 4 On Single Solaris 10 Server?
Feb 22, 2012Is it possible to easily operate both Prime Fulfillment 6 AND LMS 4 on single Solaris 10 server?
View 1 Replies
ADVERTISEMENT
Cisco :: EPM Server Processes Don't Die After Dmgtd Stop - LMS 4.2 Solaris
May 16, 2012I am unable to kill EPMServer processes after shutting down LMS 4.2 on Solaris 10. There are still 60 or so EPMServer processes running. Killing them manually does not work as they appear to restart again after killing. Only way to knock them off is to reboot the system. Why does dmgtd stop not kill all LMS processes and is there a patch required for LMS 4.2 or Solaris 10 that would work?
View 5 Replies View RelatedCisco :: LMS Prime 4.2 / How To View The Running Config On A Single Device
Jan 14, 2013We have LMS Prime 4.2. I know how to view the running config on a single device. How do I run a report that will pull all the running configs of all my devices in one report? I'd be able to same them as one big pdf or text file. ]
View 1 Replies View RelatedCisco :: Prime Infrastructure 1.2 Server License Distribution?
Feb 18, 2013We currently support multiple companies' infrastructure on a single Prime Infrastructure 1.2 server. We are using lifecycle licenses. Is it possible to assign licenses to various Businesses? For example, can I upload 100 licenses for Company-X and 100 licenses for Company-Y and when adding devices into Prime, tell it which licenses pool to pull from? Could something like this be accomplished with virtual domains?
View 3 Replies View RelatedCisco :: L-PI-1.1-CM-500 / Prime Infrastructure 1.x Server Requirements And Operating System?
Feb 2, 2013I need to order LMS for one of our customer with 500 devices and reporting capabilities ..... So i chose base license "R-PI-1.1-K9" and 500 device license "R-PI-1.1-500-K9" and Compliance Management - 500 Device License "L-PI-1.1-CM-500"? i tried to search server capability for my requirements & Operating system and couldn't find it .....
1) What is the server requirements ?
2) What is operating system (windows 2008 or VMWare VMware ESX/ESXi Version 4.1 or 5.0)
3) Is their any dedicated appliance from Cisco ?
Cisco :: Prime LMS 4.2 Soft Appliance Vmware Server Backup
Jun 13, 2012I have to install Prime LMS 4.2 on ESX customer infrastructure (ova image as soft appliance). The customer would like to know if LMS 4.2 is compatible with his backup agents :
* Symantec Veritas Netbackup (v7.1.0.2)
* Control-m (v6.4.01.300)
If not, what would be the best solution to backup the server ? Are the VMware tools supported now ?
Cisco :: LMS 4.1 For Solaris
Oct 2, 2011Is there a version LMS 4.1 available for Solaris? If so, Is it available on the Cisco Web Site for download?
We currently are running LMS 3.2.1 and need to upgrade to LMS 4.1.
Cisco :: Cannot Connect To LMS 2.6 (Solaris)
May 21, 2012We got the following error message on Ciscoworks LMS 2.6 on Solaris 5.9:
{diskWatcher} - Avialable space in /var of server xxx is less than 10 percent.
We stopped the Daemon Manager and delete some log files. After restarting the Daemon Manager it took about 45 min to came up but unfortunately when we tried to connect to the sever by IE we got "Internet Explorer cannot display the webpage" the pdshow shows that:
Process= Apache
State = Never started
Pid = 0
[Code].....
What Is Special In Solaris OS
Apr 4, 2011What's special in solaris OS?
View 2 Replies View RelatedCisco :: LMS 4.0 Installation Errors On Solaris 10
Sep 1, 2011Any info concerning the installation of CW LMS 4.0.1 on Solaris 10!
The installation keeps on failing when it is checking for packages. Also the second time when we downloaded the software once more.
ERROR: AddProperty called with invalid package name: CSCOmd.
I have also attached the install log files.
The system is Solaris 10 with zones:
bash-3.00# more /etc/release
Solaris 10 10/09 s10s_u8wos_08a SPARC
Copyright 2009 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 16 September 2009
121133-02, 125503-02, 126897-02, 127127-11, 127755-01, 138866-01 Incompatibles:
[Code] .....
Cisco Switching/Routing :: DL 380 2 WAN Ips On A Single Server
Nov 13, 2012I have a single DL 380 G5 server with 2 NIC , i have 2 applications which run on 2 separate WAN static ip addresses my query is that can i install both the applications on a single server ? secondly can i assign 2 different WAN static ips on the 2 NIC of the same server ? if yes then how it will be done i.e whether gateway will be given to both the NIC or only a single one
View 11 Replies View RelatedSingle Proxy Server For Two Different VLAN And ISP?
Jan 17, 2013I'm looking to implement a single proxy server for two different VLANs. Both VLAN have outgoing traffic configured through different ISP i.e. traffic for users on VLAN1 is routed through ISP1 and traffic for users on VLAN2 is routed through ISP2. Inter-VLAN communication is enabled. The proxy server should route internet traffic for users in VLAN1 through ISP1 and for users in VLAN2 traffic should be routed through ISP2.
View 6 Replies View RelatedMultiple Clients On Single Server?
Mar 30, 2012I just want to keep one PC as a server and one switch connect to it (For LAN). I want to connect multiple client/screen to that server, so I can use single servers for multiple screen/client.(Client machine will not have any CPU, they will utilize servers memory.)
View 1 Replies View RelatedCisco :: Works LMS 3.2 (solaris) Installation SP1 Error
Jan 3, 2012We have a Cisco Works LMS 3.2 (solaris) and installing service pack 1 we get an error during installation process:[code] We attach instalation log. We think the problem can be related to bug CSCtn45425.
View 1 Replies View RelatedSQL 2k3 Server Goes Into Single User Mode Randomly?
Jan 12, 2011Actually not randomly. It's normally after weekly reboots. This causes the Great Plains DB to be locked to 1 person, so other people get errors.
Sometimes I can just unrestrict access, other times it's grayed out and I have to drop the DB and restart the services to take it out of single user mode.
SQL 2k3.
Cisco Wireless :: 2504 - Redundant NCS Server Connected To Single WLC
Apr 15, 2013I have a customer who has 2 NCS servers; 1 residing at their corporate site and the other residing at their local site. They have a WLC2504 controller at the local site. They would like to connect both ncs servers to to the local WLC. Is it possible to connect 2 ncs servers to a single controller? Can WLC configuration databases on two different NCSs be the same? How can you prevent 1 NCS from overwritting the other?
View 5 Replies View RelatedTwo Internet Connection (same ISP) To A Single LAN (8 Computers With Server Setup)
Aug 9, 2012I have 2 internet connection with the same ISP, SmartBro 2mbps.We have 7 computer unit plus 1 unit that will serve as the server.Is it possible that we combine the two internet connection into just one LAN so that all PC's will see each other. Mainly for network gamesBTW, we don't have any routers or switch yet.
View 5 Replies View RelatedAAA/Identity/Nac :: Single Win2008R2 NPS Server To Authenticate Both VPN Users
Jul 17, 2012I have successfully set up a windows 2008 box as a Radius server and use it to authenticate VPN users against ta AD database.I have also set up a similar policy that permits authentication for management purposes to all my networking devices (routers,switches and the ASA).Both policies work fine.Of course I don't want every VPN user to have administrative access to the ASA and every other device on my network.How can I discriminate between the 2 groups (VPN users and Network administrators)
View 3 Replies View RelatedCisco :: Migrate From Prime LMS 4.0.1 To Prime Infrastructure
May 9, 2013I'm currently running CiscoWorks LMS 4.0.1 on Windows 2003 under VMware and just got upgrade licensing for Prime Infrastructure 1.2. I am assuming that I will need to upgrade the current server to Prime LMS 4.2 in order to ensure that data migration to Prime Infrastructure goes well. I am planning to follow Cisco's recommendation to run Prime LMS and Prime Infrastructure in parallel for a time and migrate individual functions.
My real question is about Syslog handling. All of the managed devices are currently sending Syslog data to LMS. As a last step in the migration, is it possible to change the IP address of the Prime Infrastructure server to replace the Prime LMS server so that the Prime Infrastructure server will just start getting all the Syslog data, or do I need to go change hundreds of managed devices to point to a new address?
Cisco :: Link Between NCS / Prime LMS And Prime Infrastructure 4.2
Mar 12, 2013What is the relation between: cisco NCScisco Prime LMSCisco Prime infrastructure.As i orderd a Cisco Prime infrastructure from a Cisco Partner and what i got is :
x2 cisco NCS appliances
x1 DVD cisco prime infrastructure
x1 DVD Cisco prime 4.2
Cisco Switching/Routing :: 6500 Single IP Bound To 2 Server Mac Address
Jun 11, 2013I have 2 servers, one active, the other standby, both will be using the same IP. If the active fails then a re-patch for the standby to make this the active. I understand that i will need to clear the arp & maybe mac address table on the 6500 for the new active server to work, as the failed server will have its mac address on the 6500,.
is there a way around this so i dont have to clear the arp cache & clear the mac table? [code]
Cisco Firewall :: 5510 Single Outside Public / Can PAT Out And NAT SMTP Server Back
Jul 30, 2012I have an ASA 5510, one public IP address on my outside interface, an internal email server and a private network.I would like...
1: Users on my private network to be able to access the internet (PAT them to external outside address)
2: Email to be delivered to my MX (my single public IP address translated back to my internal email server.
i.e. can I share my single public IP address to serve translation in both directions (private users surfing the Internet (in-to-out) and an outside to inside NAT for email) ?
Email (MX) = 1.2.3.4
Public (outside) address = 1.2.3.4
Email server internal = 10.1.2.3
Internal private subnet for users = 10.0.0.0/8
Cisco VPN :: 3845 - Multiple RADIUS Authentication Groups On Single Windows Server
Feb 15, 2011We have multiple RA VPN groups on a 3845 router.RADIUS authentication is currently happening between the 3845 and a single Windows 2008 server. We have a specific windows group that AD users are members of, and they are allowed to connect via VPN.
I'm creating a new RA VPN Group, which should only allow different AD users. Is it possible to create another RADIUS association to the same server, or do I need to authenticate against a different Windows server?
Cisco Wireless :: AP 1142 - Operate With WLC
Jul 8, 2012I have Cisco AP 1142 standalone and I want this one to operate with WLC.
I have searched in Google, they said I need to upgrade AP1142.
I don't know how to upgrade it.
Fax Machine That Operate Without A Landline?
Jan 30, 2012Are there any fax machine that operate without a landline
View 1 Replies View RelatedCisco AAA/Identity/Nac :: Can Operate Simultaneously Multiple External DB In ACS 4.2
Jan 24, 2012Can operate simultaneously multiple external DB in ACS 4.2?Mutiful External DB server is AD and Token server
View 1 Replies View RelatedCisco Switches :: ESW-500 / SPA525G CDP - Operate Differently Between Phones?
Aug 8, 2010I have an ESW-500, a SPA525G (also tried 504G), Polycom IP330/670 phones, and a Switchvox (Asterisk-based IP-PBX) and CDP causes some issues.Both the SPA5xx and Polycom phones support CDP but it appears to operate differently between the phones. And, surprisingly, worst of all on the SPA's.
In short:
* Switch - CDP enabled (VLAN 100), DHCP disabled (Option 82 enabled) which is basically how it comes out of the box
* Polycom phones - CDP enabled (default)
* Cisco phones - CDP enabled (default)
* DHCP/TFTP server on port 1
* Phones on ports 7,15,19 - default as smartports for Desktop & Phone
* Switchvox on port 17 - port configured as General (not Trunk) with 1U & 100U VLANs. This was required to get Polycom phones to appear in Switchvox config
With that configuration the Polycom phones work perfectly. They appear in the switch web-GUI under CDP, they present in Switchvox and can be configured.But with that configuration although the Cisco phones appear in the CDP screen they do not get DHCP. My DHCP server can see 'DHCP Discover' messages but it just goes around in circles. Disabling CDP on the switch will allow the phone to get an IP but disabling CDP on the phone still has the same problem. When I saw "around in circles" this is what I mean....
Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:25:84:06:12:46 [10/08 13:51:27.031]
DHCP: proposed address 192.168.100.16 [10/08 13:51:29.000]
4064 Request 2 not processed [10/08 13:51:29.062]
Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:25:84:06:12:46 [10/08 13:51:30.093]
DHCP: proposed address 192.168.100.16 [10/08 13:51:31.593]
4064 Request 2 not processed [10/08 13:51:31.656]
[code]....
With the difference being there's a 'DHCP Inform Msg' which there never is from the Cisco.I have tried many options regarding DHCP Relay, DHCP Server addresses, DHCP VLAN Interfaces, smartport settings etc but with CDP enabled the Cisco phone just will not get DHCP.
Operate A Website From A Shared Internet Connection?
Mar 26, 2012I am designing a network internet connection to our 20 apartment block. The WAN is Ultima up to 40mb/s and the take up is expected to be modest in terms of throughput. However I have been told that two apartments want to run their own non commercial web sites which currently operate on adsl with ddns provision from TZO. The netgear vdsl router supplied by the ISP will obviously have port forwarding but how do I cater for more than one LAN destination requiring port 80 traffic??Surely I dont have to have an in-block DNS.
View 6 Replies View RelatedObtain The Security Key To Allow Computer To Operate Internet?
Jan 23, 2011I have forgotten my security key in order for my new computer to connect to the internet wirelessly. What is the easiest way to find that security key?
View 1 Replies View RelatedOperate The Internet Wirelessly On The Television Monitor?
Feb 9, 2013I would like to operate a design program and have access to the internet on a 32 inch television wirelessly from my laptop. What do I need?
View 1 Replies View RelatedRealtek RTL8168D - How To Operate At Gigabit Speeds
Sep 1, 2011I recently said to hell with wireless and wired my apartment with Cat6. My desktop computer next to the router is running fine at 1Gbps. My media center one room over is only running at 100Mbps, and I cannot figure out why.
The motherboard has a Realtek RTL8168D . I have green ethernet enabled... could that be it? Auto disable gigabit is disabled. I tried changing speed & duplex from Auto to 1Gbps, and that didn't change anything. The latest driver is installed. Their ethernet diagnostic utility shows the link speed at 100.
Cisco Switching/Routing :: 6509 How Does Spanning-tree Operate
Mar 21, 2012..I am connecting a Nexus 5K to a 6509 without VSS. Is the recommended configuration just straight etherchannel? Since the 6509 cannot do vpc, is an etherchannel the best way to configure this uplink? How does spanning-tree operate.
View 3 Replies View RelatedLinksys Wireless Router :: WRT160N-SG - Unable To Operate
Oct 18, 2011I selected: Static IP
Static IP:192.168.0.100
Subnet: 255.255.255.252
Gateway:192.168.0.1
DNS: 60.49.166.105
I am a Malaysian, using Streamyx here, I search some articles shows that the ISP given is 60.49.166.105 or 60.49.166.106. Am I right in the setup? Why I am still unable to online though successful to connect after the setup configuration?