Cisco AAA/Identity/Nac :: Can Operate Simultaneously Multiple External DB In ACS 4.2

Jan 24, 2012

Can operate simultaneously multiple external DB in ACS 4.2?Mutiful External DB server is AD and Token server

View 1 Replies


ADVERTISEMENT

Cisco AAA/Identity/Nac :: ACS 4.2 Authentication Using Multiple External Databases

Feb 7, 2012

We currently use ACS 4.2 for authentication of corporate users who are accessing the network in 2 different ways:
 
1) VPN client (via ASA5510)

2) Wireless (EAP-PEAP)
 
For all users who currently access the network via either of the above 2 methods, the Password Authentication under User Account settings in ACS is set to query an RSA SecurID Token Server.
 
We would like to try achieve the following in ACS:
 
IF an access request comes from the ASA (VPN clients), THEN we would like the user's password authentication to be handled by the RSA SecurID Token Server as it currently is. IF an access request comes from the Wireless LAN controllers THEN we would like to use EAP-TLS authentication. (We are aware that we would obviously need to configure the WLC, clients, PKI infrastructure etc accordingly for eap-tls). 

View 1 Replies View Related

D-Link DCS-930L :: Camera Support Multiple Destinations Simultaneously?

Aug 31, 2011

Can the camera support multiple destinations simultaneously?

In testing set-up for ftp and email, while observing results in a browser on the Mac, and also MyDlink app on an iPad, I observe that a few jpegs get sent to email, a few to ftp, and MyDlink keeps "timing out". My Mac is wired gigabit ethernet to the router, and the wireless LAN is 802.11n.
Maybe it can't handle multiple destinations?

Does MyDlink cause continued transmissions at the video frame rate set in the setup panel, even if no one is connected to look.

View 14 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.2 Group Mapping With LDAP External Identity Store

May 18, 2011

I have a new Cisco Secure ACS 5.2 on a VM. We want to use it to for administrative access to our Cisco equipment  with TACACS+. I am trying to map user permissions to different groups of devices based on active directory group membership, however it is not working.
 
I am using an LDAP (configured for secure authentication) external identity store. On the directory organization tab, I have confirmed the accuracy of the subject and group search base and the test configuration button shows that it's finding > 100 users and >100 groups.
 
On the directory groups page I have entered the groups according to the required format. cn=groupname1,ou=groups,dc=abc,dc=com
 
I have a rule based result selection under group mapping. I have two rules in the format below.
 
Conditon
LDAP:Externalgroups groupname1
Result
Identitygroup1
 
I have the default group set to a identity group named other. My problem is, no matter what user attempts to authenticate, the Default rule is applied, and the user is put into the other identity group.This occurs when I log on as a groupname1 user, groupname2 user, or as user that is not a member of either of those groups. LDAP authentication works and the user is able to logon to the device.

View 3 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.1.0.44 External Identity Stores Account To Be Locked Out

May 11, 2012

I am currently running cisco ACS 5.1.0.44 and use active directory as the main authentication identity store to allow network administrators to have access to network devices in my organization .As per the established security policies in my organization , the ACS has to disable any account after 3 failed login attempts to any network devices .i have gone through all the settings oN the acs but couldn't find where or how it is done .

View 3 Replies View Related

Cisco AAA/Identity/Nac :: Authenticate VPN Users Via ACS 5.4 And AD Via External Identity Store

Feb 22, 2013

I have installed ACS 5.4 and we are looking to authenticate our Anyconnect users with ACS via Active Directory. I think I have the correct commands in our ASA ( we had ACS 4 and authenticated our anyconnect users ).
 
I also have configured ACS to use Active Directory  and installed the server side cert in ACS. I'm just uncertain how to program ACS to use the security group that I have setup in Active Directory.

View 6 Replies View Related

Cisco AAA/Identity/Nac :: ACS5.3 - Configuring Multiple Identity Sources

Aug 28, 2012

I have an ACS 5.3 cluster, that is configured to use AD. There are a few wireless devices, and monitoring tools that do not have AD accounts. I would like to configure ACS to first check AD for the user authentication, and if that fails to roll over to the local (Internal Users) identity source where I can define these user accounts.
 
It seems that when the authentication hits the initial Identity Policy rule, it never moves onto the next one if the first fails.
 
Attached are screen shots that show how i'm configured for the test, i have a local user defined and I'm trying to log into the firewalls.
 
- Identity Definition : Screen shot of the main ACS definition for the rule i'm testing that's not working
- Identity Rule 1 : The configuration of rule 1 that if it fails i need it to move onto rule 2.
- Log Output : Screen shot for one of the failed attempts from the ACS View Log server.
 
Reason I need to configure it this way is:

- Wireless users authenticate to wireless using AD user accounts. Some hand held scanners do not support that and will need to authenticate using the MAC address.
- Authentication to Network devices for managment uses AD accounts. We have some monitoring tools that do not have AD accounts, and will need to    be able to log into Network devices to issue some commands (Examples: Cisco Prime LMS and NCS, Infoblox NetMRI).

View 4 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.3 Connect To Multiple Identity Stores

Aug 15, 2012

I understand that Cisco Secure ACS 5.3 supports the integration with existing external identity repositories such as Windows Active Directory and LDAP servers. In fact, in my environment, my ACS 5.3 is now integrated with AD and RSA.My question here is can Cisco Secure ACS 5.3 integrate with "multiple" WIndows AD, LDAP, RSA Server etc.? if yes, is there a Cisco document stating this? The keyword here is multipple.

View 4 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.2 - Multiple Identity Store For PEAP

Sep 25, 2011

I am trying to setup PEAP authentication for wireless users but I got stuck at place where I have single ssid and users are store in different identity stores like some will be using their active directory and some are locally created users on ACS. I created separate service for wireless authentication and under that I am unable to create rule to differentiate them with identity stores. any idea how to achieve this.
 
I tried creating identity selection based on role but it does not work as for protocol like radius.peap,ms-chap ACS does not look for another identity store once user not find in an identity stores.

View 1 Replies View Related

Cisco Firewall :: Multiple External IPs On ASA 5505?

Dec 26, 2011

We have a working config with 1 external IP, we need to a second webserver (https) and it should be routed via a second public IP address. I already tried some suggestions from the community but haven't been able to find the solutions.
 
xxx.xxx.xxx.194 is going to the internal IP of 192.168.60.1 for OWA (https)
xxx.xxx.xxx.195 should go to a new webserver on 192.168.60.3
 
both server should be connected using SSL This is the current configuration :
 
ASA Version 8.3(1) !hostname fwdomain-name domain.localnames!interface Vlan1nameif insidesecurity-level 100ip address 192.168.60.250 255.255.255.0 !interface Vlan2nameif outsidesecurity-level 0ip address xxx.xxx.xxx.xxx 255.255.255.0 !interface Ethernet0/0switchport access vlan 2!interface Ethernet0/1!interface Ethernet0/2!interface Ethernet0/3!interface Ethernet0/4!interface Ethernet0/5!interface Ethernet0/6!interface Ethernet0/7!ftp mode passiveclock timezone CEST 1clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00dns server-group DefaultDNSdomain-name domain.localobject network obj_any subnet 0.0.0.0 0.0.0.0object network NETWORK_OBJ_192.168.70.0_26 subnet 192.168.70.0 255.255.255.192

[code].....

View 3 Replies View Related

Cisco WAN :: Multiple External IPs Routed Through RV016?

Oct 16, 2011

I have been looking over the manual for my rv016 but cannot find the information I need.
 
I have 4 external ip addresses that I need to be able to forward to specific internal ips.
 
A couple of the external addresses will be forwarding with the same ports so just simple port trggering or forwarding will not work.
 
Can this be accomplished with the rv016 or do I need to look at another device?

View 4 Replies View Related

Cisco Switching/Routing :: NAT Multiple External IPs On RV180?

Dec 25, 2012

how to properly route multiple external IPs to internal ips assigned to several servers.  Where I'm getting a bit lost is that I have two levels of routing - one from the outside into a comcast business class cable modem, which also creates its own internal network.  Within that internal network, I have my RV180 router, which creates another separate internal network in which the servers live (don't want the servers to have access to other computers within the Comcast Modem's internal network).  I want to map the external ips to servers within the RV180 second level network.
 
To diagram:
 
Comcast Cable Modem
/         
RV180     Computer(s)
/    
S1     S2
  
An internal IP is assigned to the RV180 router.  Suppose it is 192.168.1.100.
 
The cable modem itself supports NAT as well.  Do I use NAT twice (on both cable modem and RV180) to route the external IP to S1 and S2?
 
Or do I modify the routing table on the cable modem?  Then use One to One NAT on the RV180 to map the external IPs directly to the internals?

View 2 Replies View Related

Cisco Firewall :: PIX 515E - Multiple External Subnets

May 23, 2011

I have an existing pair of PIX 515E that has two interfaces. One connected to the public internet via my ISP and one internal.  
I recently ran out of IP's and had the ISP route an additional block to public IP of my firewall. This isn't working for some reason and I'm trying to figure out why.
 
The "ip address outside XXX" command defines the outside address and I don't see any way to add a secondary sub net.
 
I tried just adding a rule to the firewall for one of the IP's in the new subnet, but I can't seem to get traffic to pass though the device.

View 1 Replies View Related

Cisco Routers :: RV042 Firewall Multiple External IP Addresses

Oct 6, 2011

if possible with the RV042.Primary External IP address uses port forwards for some ports, all okay.I would like to have other external ip addresses assigned to machines on my lan.Basic host multiple web servers, on different IP addresses, using port 80. [code]
 
From what i am reading, it looks like the RV042 can do this, but I am not real clear what my rules should look like.
 
I would think my high priority rule for each external IP address would be to deny all traffic first for each machine on the lan.Then create one entry with source 202.x.x.2 port 80 -> 192.168.168.2 ?
 
How should I set my rules to do this, and what settings should I have on the Nic of the second machine?

View 3 Replies View Related

Cisco VPN :: Separate L2L VPN Tunnels On Multiple External ISP Interfaces With ASA 5510

Oct 18, 2012

Due to special circumstances we have 2 ISP links on an ASA5510. I am trying to terminate some L2L VPN tunnels on one link and others on the second ISP Link, eg below:
 
LOCAL FIREWALL
crypto map outside-map_isp1 20 match address VPN_ACL_Acrypto map outside-map_isp1 20 set peer 1.1.1.1crypto map outside-map_isp1 20 set transform-set TS-Generic
crypto map outside-map_isp2 30 match address VPN_ACL_Bcrypto map outside-map_isp2 30 set peer 3.3.3.3crypto map outside-map_isp2 30 set transform-set TS-Generic
crypto map outside-map-isp1 interface ISP_1crypto map outside-map-isp2 interface ISP_2
crypto isakmp enable ISP_1crypto isakmp enable ISP_2
route ISP_1 0.0.0.0 0.0.0.0  1.1.1.254route ISP_2 3.3.3.3 255.255.255.255  2.2.2.254
 
Establising the VPN tunnels in either direction when using ISP_1 works fine establishing in either direction from remote access users and multiple L2L tunnels (only showing one for example).
 
On ISP_2
1. Peer 3.3.3.3 device establishes a VPN tunnel, but the return traffic does NOT get back to devices on 3.3.3.3 tunnel.
2. The local firewall does NOT establish a VPN tunnel going to 3.3.3.3
It would seem to indicate that the problems lies with this multihomed firewall not directing the traffic correctly to either return down and establised VPN tunnel (point1) or to intiate a tunnel if none exists (point 2).

Reconfiguring the VPN tunnel peer for 3.3.3.3 to be on ISP_1 of the local firewall, all springs into life! There are sufficient license etc...

View 4 Replies View Related

Cisco Firewall :: Statically PAT Multiple Internal Hosts To One External Host 5510

Feb 20, 2012

I am working on replacing our Checkpoint Firewalls with ASA's, and am running into the following NAT problem. On some of our Checkpoints, there are external NAT's that are mapped to multiple internal hosts based on ports.Is there any way to translate that to the ASA? I'm not sure the ASA will let you have multiple internal hosts mapped to one external IP using static NATs. The main issue, is these are alarm panels that receive data from external hosts (the traffic is initiated externally on the Internet) so I can't use dynamic PAT with this.

View 1 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.3 - Connection To External ID Store - Encrypted?

Mar 14, 2012

are the connections between the ACS and external identity stores encrypted?I know that when setting up LDAP identity store there is the option to specify SSL conection.  Are the other connections encrypted by default, or is the data sent between the ACS and AD, for example, sent in the clear?

View 3 Replies View Related

Cisco AAA/Identity/Nac :: LDAP Or AD For External Database - Secure ACS 5.2

Sep 27, 2012

I am working on project with Secure ACS 5.2.  I am trying to determine the proper External Database to use.  LDAP or direct to AD?
 
Additionally, the Domain that I am connecting to has Multiple sub domains.  All of the users are currently in the Sub domains, but will be moving to root domain later.  How should I configure the connection, do I need to connec to each sub domain or can I just connect to the root?

View 2 Replies View Related

AAA/Identity/Nac :: ACS 4.2 - Send RADIUS To An External Site?

Jan 16, 2012

I've got a pair of Cisco ACS 4.2 servers running on our corporate LAN. Currently they are doing TACACS+ for the network gear, and wireless authentications for internal users.
 
We have contracted with an external web site for an application - They can run RADIUS from their site to our LAN for the user authentications. How can I best do this?
 
1. NAT the traffic on my ASA firewalls to the internal servers, send the RADIUS traffic to/from the external site?
 
2. Is this secure?
 
3. Should I have a RADIUS server in the DMZ instead?
 
4. Any issues with doing this on ACS 4.2?

View 0 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.3 - External Proxy Service User Logs?

Apr 11, 2012

We are currently using Cisco ACS 5.3.0.40.2. One of the Services Selection Policy it hosts is:
 
Receive Authentication request from a wireless controller for a wireless userIf the wireless user's username contains a particular domain suffix, the request is proxied to an external proxy server using an External Proxy service (configured for both local/remote accounting)On receiving an Acccess-Accept from the external proxy, the user is given access and ACS 5 will start logging account packets for the username (nothing appears in the RADIUS authentication logs - ACS 5 it seems doesn't log proxied authentication requests) The above setup works fine in most instances. We start to have problems when an external proxy server strips the domain suffix off the username in the Access-Accept packet e.g.
 
ACS 5 proxies an Access-Request to an external proxy server (with Username = someuser@somwhere.com)The external proxy replies with an Access-Accept (with Username = someuser)The user 'someuser' is given access but subsequent accounting attempts fail because their username (without the domain suffix) doesn't match the Service Selection PolicyIs there any way to get ACS 5.3 to log proxied authentication requests? If not, can I configure ACS 5.3 to use the username in the Access-Request packet (rather than the username in the Access-Accept packet) for accounting?

View 2 Replies View Related

AAA/Identity/Nac :: ACS5 Try To Authenticate User In External Database

Jan 16, 2012

Is it possible to create on ACS5 rule which will:

1. Try to authenticate user in external database1 (radius)
2. When external database1 returns FAIL (because of bad password) ACS5 should try to authenticate user in another external database2 (radius)

View 5 Replies View Related

AAA/Identity/Nac :: CSACSE-1113-K9 / ACS 4.2.1.15 External User Database

Mar 9, 2012

Having CSACSE-1113-K9 with ACS 4.2.15.I want to configure windows user database under extrenal user database but i get an error  (attached) 'An error has occured while processing the Authen DLL Configure pagebecasue an error occured.I tried to stop the services and start agian but the same issue. The eappliance is secondary (backup) ACS. On the primary it is working fine.

View 1 Replies View Related

AAA/Identity/Nac :: ACS 4.0 / 4500 Switch - External DB User Invalid Or Bad Password

Apr 19, 2011

I have problem with Cisco ACS 4.0 "Windows" with core 4500 switch "cat4500-ENTSERVICESK9-M 12.2"  the problem shows only on one device  "x.x.x.x" the problem is " Authen failed-------badcred------External DB user invalid or bad password" i can see it in failed attempt. on the same side i can see in Passed Authentications for same record "Authen OK", i can login to the mentioned switch using my ACS credentials and not local database credentials
 
can debug this from ACS if not how can view the authentication records from core switch?

View 8 Replies View Related

Cisco AAA/Identity/Nac :: ACS5 / One User / Two Credentials (external Token Versus Cert)

Nov 30, 2011

I have ACS4 and i am planning to upgrade to ACS5.I would like to have such a rules:I have user1, one ASA device which is VPN concentrator for remote users.ASA have two different tunnel-groups: one which allow for logging via certificate (with mandatory pki authorization thru ACS) with disabled Xauth,and second tunnel-group with allow login thru typical Xauth with authorization thru ACS which users external database (RSA Tokens).So i have one user1 which can login thru VPN using RSA tokencode or certificate.For example: on phone user1 uses certificate, and on PC station the same user1 uses token password.For tunnel-group with pki authorization ASA checks username in ACS and in typical scenario login="CN from certificate" and password="CN from certificate". So we would need "two credentials" for the user - one for pki authorization, and second one external database (RSA token).Is such scenatio possible under ACS 5 ? where one user uses different credentials based on tunnel-group usage ?

View 2 Replies View Related

Cisco AAA/Identity/Nac :: Multiple EAP Certificates In ACS 5.2?

Feb 10, 2011

I want to use multiple cert (enterprise certs and verisign cert) for authentication in wireless.Users that have their computer in the domain should use EAP-TLS and PEAP (verisign) are for users in the domain but on non-domain computers.I can only enable one certificate in system adminstration->local server certificates-> local certificates to use EAP.I have installed both enterprise and verisign cert in the CA store in User and Identy store and enbled the enterprise cert for EAP-TLS.The EAP-TLS connection works fine when the enterprise cert is enabled for EAP (in local certificates) but PEAP does not. If I enable EAP on the verisign cert in local certificates the enterprise cert get EAP disabled and that authentication stops working av PEAP starts working.
 
Is the ACS5.2 only able to have one certificate enabled at the time for EAP?

View 10 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.3 Multiple AD Domains

Aug 9, 2012

I do have a quick question about Cisco ACS 5.3 and multi domain authentication. How is it exactly handled?
 
Can I join more than one domain with the ACS server? Or do I still need to configure that bidirectional trust relationship between those AD forests (even with the ACS 5.3)?

View 5 Replies View Related

Cisco AAA/Identity/Nac :: ACS 4.2 - Delete Multiple Clients?

Jun 28, 2011

I've inherited some ACS appliances from another part of my organization.  I need to keep most of the settings but want to remove all the AAA clients; and preferably not one-by-one.  I don't see a way in the documentation and web searches have proven fruitless.

View 1 Replies View Related

Cisco AAA/Identity/Nac :: ACS 4.2 Multiple AD Domain Authentication?

Feb 3, 2013

I have acs 4.2 for windows installed on a windows server 2003 box, because of a merger I need to now authenticate against 2 different domains, there is a bidirectional trust between the two domains and the dial-in permission has been set in ADUC but whenever I try to authenticate a user it says dial-in permissions needed in the acs failed authentication log.

View 5 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.x - Configuring Multiple AD Domains For Authentication

Jan 7, 2013

Currently on ACS 5.2 and our MS Active Directory is migrating to a completely new domain. There will be a two way trust between them for the 24 month migration period. How best to configure ACS connect to both domains?

View 2 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.2 Multiple Domain Prefix Searching?

May 23, 2011

We have an ACS 5.2 server connected to an AD domain controller which has several trusted domains.  (domain1, domain2, domain3)  We currently have to specify which domain each user belongs to (ie, domain1user) in order to connect.  We would like to only have to enter the user name without the prefix, (ie, user1) and have ACS automatically check each domain for a match.  Is this possible with ACS 5.2?  I seem to remember this was possible with ACS 4.2.

View 2 Replies View Related

Cisco AAA/Identity/Nac :: 7925 ISE Cannot Run Multiple Signed CA In Store

Jun 4, 2013

Using Sha1 for Cisco 7925g and sha256 for data. Two separate CA's, one EnTrust (SHA1) the other Local Wondows CA (SHA256); ISE can only use one at a time to process a particular protocol (ie..EAP-TLS, HTTP, etc...) As a result we have to have a separate PSN just for Wireless and Wired VoIP (which can only hold SHA1 RSA1024).

View 5 Replies View Related

Cisco AAA/Identity/Nac :: Multiple Instance Of Custom Attributes ACS 5.x?

Nov 27, 2011

is there a way to have multiple instances of user custom attributes and insert those as multiple instances of the A/V Pair in the authorisation profile in ACS 5.2/5.3 ?Background: We have to migrate a ACS 4.2 to 5.3. In ACS 4.2 our client used the multiline attribute
 
Number
#Name
#Description
#Type of Value
#Inbound/Outbound

[code]....

to specify multiple routes to various networks in the RADIUS reply spcific for every single PPP username of routers dialing in.Using the internal user database, extended by a string attribute and using that attribute as source of a dynamic value in the access-policy works basically. But as I have only ONE single line instance of the attribute for every user, I can only return ONE framed-route.We have lots of cases where multiple routes have to be assigned to one router.I 'd like to avoid defining a seperate access profile for every remote RAS router for external PPP Dial-In...[URL]

View 1 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.2 - AD Integrate With Single Domain Name With Multiple ADs

Sep 3, 2011

We having ACS version 5.2 0.26 with Active/Standby. We need to integrate active directory with ACS. Domain name given by Server team was as xyzcompy.local. When I tried to resolve the same domain name I got five servers ip address against the same domain name. however we given the ip reachability to only for two servers. We we try to save we get error saying that "Can not resolve the network address".
 
So my questions are;

- does ACS should have ip reachaibility to all five servers

- does the username/password we entered in the ACS should have domain admin rights?.

- the given AD is configured with windows NTP [URL] but when we configured ACS as windows NTP it was taking  local server as active NTP..?
 
When we check the ACS logs, we saw the following error;

in acsLocalStore:
AdminName=acsadmin, DomainName=qatarconvention.local, ADOperationResult=unable to create secured connection against AD server, switching to non-secured connection. javax.naming.CommunicationException: simple bind failed: qnccad02.xxxxconvention.local:636 [Root exception is java.net.SocketException: Connection reset],
in ACSADAgent;
32484]: INFO  dns.findsrv FindSrvFromDns failed: res_query failed _ldap._tcp.xxxxconvention.local
Sep  4 12:43:20 acs01-cc4 adjoin[32484]: INFO  cli.adjoin Join to domain 'xxxxconvention.local', zone 'null' failed.
 
I attached some screen print which saw the error and output of nslookup for the domain name.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved