I do have a quick question about Cisco ACS 5.3 and multi domain authentication. How is it exactly handled?
Can I join more than one domain with the ACS server? Or do I still need to configure that bidirectional trust relationship between those AD forests (even with the ACS 5.3)?
Currently on ACS 5.2 and our MS Active Directory is migrating to a completely new domain. There will be a two way trust between them for the 24 month migration period. How best to configure ACS connect to both domains?
View 2 Replies View RelatedI'm looking to implement ACS 5.2 using 802.1X, we have two seperate AD domains.A single switch will need to support both ADs, so if a machine in AD1 is connected, it will be authenticated to the ACS using AD1 and applied to VLAN1, while a machine that is in AD2 will be authenticated to AD2 and applied to VLAN 2.
I'm looking at machine authentication, not user authentication, so I assume that I will need to import two certs from each AD.
Is it possible for Windows 7 to host multiple domains? I have seen that it is available for plenty of other OSs and I am sure that it is. I just wanted to make sure.
View 2 Replies View Relatedjoin multiple domains in windows xp?
View 2 Replies View RelatedThe users belong to Multiple AD domains. If we purchase WLC 2500 controller. Can I have one more WLANs authenticate to multiple radius or ad domains? I thought one WLAN/ ssid authenticate to single radius server.
View 4 Replies View RelatedI have a customer with three rooms where teh access layer aggregation switches are run back to.
Access Switch Stack A -> room 1 + room 2
Access Switch Stack B -> room 2 + room 3
Is it possible to have three Nexus 7000s ie one in each room (1,2 and 3) and have them setup like this:
Nexus 7000#1 vPC domain 1
Nexus 7000#2 vPC domain 1 + vPC domain 2
Nexus 7000#3 vPC domain 2
Thus gving all access switch stacks redundant links to the core withouit spanning tree.
I know its not ideal but its a campus site and thats how the existing fibre runs go.
We are trying to set up ACS 5.2 in our multi-forest AD environment. As part of our evaluation we set up an Active Directory External Identity Store to a domain (a.b.edu). It connects properly and I can see the directory groups in the that tab when we Select. This domain (a.b.edu) has a two way trust with another domain in another forest (x.y.b.edu). However, I do not see the groups in that domain and I cannot seem to manually add those groups using the Add on the free text Group Name.
The documentation is not clear on this point: Page 8-41 and 8-42 of the "User Guide for the Cisco Secure Access Control System 5.2) says: "The External User Groups dialog box appears displaying a list of AD groups in the domain, as well as other trusted domains in the same forest." This implies to me that it cannot cross forests even though a trust is set up. This seems to be what is happening.
I have an ACS 5.3 cluster, that is configured to use AD. There are a few wireless devices, and monitoring tools that do not have AD accounts. I would like to configure ACS to first check AD for the user authentication, and if that fails to roll over to the local (Internal Users) identity source where I can define these user accounts.
It seems that when the authentication hits the initial Identity Policy rule, it never moves onto the next one if the first fails.
Attached are screen shots that show how i'm configured for the test, i have a local user defined and I'm trying to log into the firewalls.
- Identity Definition : Screen shot of the main ACS definition for the rule i'm testing that's not working
- Identity Rule 1 : The configuration of rule 1 that if it fails i need it to move onto rule 2.
- Log Output : Screen shot for one of the failed attempts from the ACS View Log server.
Reason I need to configure it this way is:
- Wireless users authenticate to wireless using AD user accounts. Some hand held scanners do not support that and will need to authenticate using the MAC address.
- Authentication to Network devices for managment uses AD accounts. We have some monitoring tools that do not have AD accounts, and will need to be able to log into Network devices to issue some commands (Examples: Cisco Prime LMS and NCS, Infoblox NetMRI).
I understand that Cisco Secure ACS 5.3 supports the integration with existing external identity repositories such as Windows Active Directory and LDAP servers. In fact, in my environment, my ACS 5.3 is now integrated with AD and RSA.My question here is can Cisco Secure ACS 5.3 integrate with "multiple" WIndows AD, LDAP, RSA Server etc.? if yes, is there a Cisco document stating this? The keyword here is multipple.
View 4 Replies View RelatedI am trying to setup PEAP authentication for wireless users but I got stuck at place where I have single ssid and users are store in different identity stores like some will be using their active directory and some are locally created users on ACS. I created separate service for wireless authentication and under that I am unable to create rule to differentiate them with identity stores. any idea how to achieve this.
I tried creating identity selection based on role but it does not work as for protocol like radius.peap,ms-chap ACS does not look for another identity store once user not find in an identity stores.
I want to use multiple cert (enterprise certs and verisign cert) for authentication in wireless.Users that have their computer in the domain should use EAP-TLS and PEAP (verisign) are for users in the domain but on non-domain computers.I can only enable one certificate in system adminstration->local server certificates-> local certificates to use EAP.I have installed both enterprise and verisign cert in the CA store in User and Identy store and enbled the enterprise cert for EAP-TLS.The EAP-TLS connection works fine when the enterprise cert is enabled for EAP (in local certificates) but PEAP does not. If I enable EAP on the verisign cert in local certificates the enterprise cert get EAP disabled and that authentication stops working av PEAP starts working.
Is the ACS5.2 only able to have one certificate enabled at the time for EAP?
I've inherited some ACS appliances from another part of my organization. I need to keep most of the settings but want to remove all the AAA clients; and preferably not one-by-one. I don't see a way in the documentation and web searches have proven fruitless.
View 1 Replies View RelatedI have acs 4.2 for windows installed on a windows server 2003 box, because of a merger I need to now authenticate against 2 different domains, there is a bidirectional trust between the two domains and the dial-in permission has been set in ADUC but whenever I try to authenticate a user it says dial-in permissions needed in the acs failed authentication log.
View 5 Replies View RelatedWe have an ACS 5.2 server connected to an AD domain controller which has several trusted domains. (domain1, domain2, domain3) We currently have to specify which domain each user belongs to (ie, domain1user) in order to connect. We would like to only have to enter the user name without the prefix, (ie, user1) and have ACS automatically check each domain for a match. Is this possible with ACS 5.2? I seem to remember this was possible with ACS 4.2.
View 2 Replies View RelatedCan operate simultaneously multiple external DB in ACS 4.2?Mutiful External DB server is AD and Token server
View 1 Replies View RelatedWe currently use ACS 4.2 for authentication of corporate users who are accessing the network in 2 different ways:
1) VPN client (via ASA5510)
2) Wireless (EAP-PEAP)
For all users who currently access the network via either of the above 2 methods, the Password Authentication under User Account settings in ACS is set to query an RSA SecurID Token Server.
We would like to try achieve the following in ACS:
IF an access request comes from the ASA (VPN clients), THEN we would like the user's password authentication to be handled by the RSA SecurID Token Server as it currently is. IF an access request comes from the Wireless LAN controllers THEN we would like to use EAP-TLS authentication. (We are aware that we would obviously need to configure the WLC, clients, PKI infrastructure etc accordingly for eap-tls).
Using Sha1 for Cisco 7925g and sha256 for data. Two separate CA's, one EnTrust (SHA1) the other Local Wondows CA (SHA256); ISE can only use one at a time to process a particular protocol (ie..EAP-TLS, HTTP, etc...) As a result we have to have a separate PSN just for Wireless and Wired VoIP (which can only hold SHA1 RSA1024).
View 5 Replies View Relatedis there a way to have multiple instances of user custom attributes and insert those as multiple instances of the A/V Pair in the authorisation profile in ACS 5.2/5.3 ?Background: We have to migrate a ACS 4.2 to 5.3. In ACS 4.2 our client used the multiline attribute
Number
#Name
#Description
#Type of Value
#Inbound/Outbound
[code]....
to specify multiple routes to various networks in the RADIUS reply spcific for every single PPP username of routers dialing in.Using the internal user database, extended by a string attribute and using that attribute as source of a dynamic value in the access-policy works basically. But as I have only ONE single line instance of the attribute for every user, I can only return ONE framed-route.We have lots of cases where multiple routes have to be assigned to one router.I 'd like to avoid defining a seperate access profile for every remote RAS router for external PPP Dial-In...[URL]
We having ACS version 5.2 0.26 with Active/Standby. We need to integrate active directory with ACS. Domain name given by Server team was as xyzcompy.local. When I tried to resolve the same domain name I got five servers ip address against the same domain name. however we given the ip reachability to only for two servers. We we try to save we get error saying that "Can not resolve the network address".
So my questions are;
- does ACS should have ip reachaibility to all five servers
- does the username/password we entered in the ACS should have domain admin rights?.
- the given AD is configured with windows NTP [URL] but when we configured ACS as windows NTP it was taking local server as active NTP..?
When we check the ACS logs, we saw the following error;
in acsLocalStore:
AdminName=acsadmin, DomainName=qatarconvention.local, ADOperationResult=unable to create secured connection against AD server, switching to non-secured connection. javax.naming.CommunicationException: simple bind failed: qnccad02.xxxxconvention.local:636 [Root exception is java.net.SocketException: Connection reset],
in ACSADAgent;
32484]: INFO dns.findsrv FindSrvFromDns failed: res_query failed _ldap._tcp.xxxxconvention.local
Sep 4 12:43:20 acs01-cc4 adjoin[32484]: INFO cli.adjoin Join to domain 'xxxxconvention.local', zone 'null' failed.
I attached some screen print which saw the error and output of nslookup for the domain name.
I have multiple campuses and a Central Admin...I've created Groups for all, except I need a few devices within Central to be available to the Campus Admins... (ie..a Cisco WCS System) How do I allow a device to be put into multiple NDG groups?
View 1 Replies View RelatedSo we have multiple ISE Servers with differing personals. I was having an issue with our new ISE setup not identifying AD Group Attributes when using them in Authorization rules. We have 2- 3395 appliances running Admin and Monitoring/Troubleshooting Personas and 2- 3395 appliances running as Policy server personas. We are running v1.1.1.268 with the latest two patches. I was unable to pull Active Directory Group Attributes in any of my Authorization rules. After Resyncing all the boxes with the Primary Administration box I was able to do this. There is no bug listings for this occurrence nor do we have Smartnet to call support for other reasons.
View 3 Replies View RelatedI use ACS 5.3.0.40.8 with TACACS+ servicing Device AAA and RADIUS servicing the Cisco Wireless environment for AD user access. How can I implement 802.1x with the current RADIUS implementation with hindering current wireless users or am I hindered due to the EAP-GTC in use with PEAP via RADIUS?
View 3 Replies View RelatedI'm working with a 1113 ACS device running the 4.2.0.124 software. I'm trying to get multiple network device groups to use an existing Remote Agent set up for authentication against our Windows domain. For instance, we want our infrastructure switches to authenticate agains the local Active Directory and our WLC to authenticate users agains the same Active Directory. When I try and set both network device groups to use the same remote agent, it fails and reports either the host name is already in use or the IP address overlaps with an existing remote agent.
The question is:
Can I have multiple network device groups use the same remote agent? Or do I have to install the remote agent software on separate Windows servers in order to have different types of devices authenticate against the Windows AD?
My company bought another company and moved them into our building. the company moved in but are on an entirely different network all together. wired separately, different domains.what i would like to do is be able to have them communicate with each other. have users on company A be able to use printers on company B's side of the network.
View 15 Replies View RelatedNeed step by step instructions for setting up trust between two domains
View 1 Replies View RelatedI am creating a migration plan for our organization, Im wondering, how many domain controllers people have, how many member servers and what there used for?
View 3 Replies View RelatedHow do I block specific domains (pandora.com, etc.) in the Sonicwall? It seems like this would happen in the CFS but do I need a subscription for this? I don't want to subscribe to Sonicwall's filtering list, I just want to block a couple specific domains.
View 9 Replies View RelatedMy company have just set up a new subsidiary. I have had a request from my Managing Director asking if it is possible for us to share calendars with the other company so if he wants to make a meeting appointment he can check if Joe Bloggs from the subsidiary is free.There is domain A (parent company) and domain B (subsidiary)Both us and the subsidiary are currently running Microsoft Exchange 2007 on windows SBS 2008 server with mainly windows 7 clients with Outlook 2007-2010?Is it possible to share calendars between the 2 domains?
View 7 Replies View RelatedI've been tasked with designing a network consisting of 3 separate broadcast domains with each one representing a separate business accross 3 separate floors. None of the companies should be able to communicate with each other.I've been told that the design should only represent the first 3 layers of the OSI model so I'm only looking at Cabling, Switching and Routing.
I don't expect you all to tell me exactly how I should do this, however I just need a starting point. My main issue is with routing. I'm aware that each port on a router represents a broadcast domain so if I use one router, 3 broadcast domains, does that means that none of the domains will be able to communicate with each other? Should I use more than one router or can i get away with one? Also just so you are aware I've been told not to use VLans and each broadcast domain must have its own ip address schema.
Does the LDAP authentication work across W2K3 Active Directory domains and multiple ASA5510 firewalls? Or do I need to setup another type of authentication? If I use another type of authentication can I get specific portals with special bookmarks based on login account?
View 4 Replies View RelatedI would like to configure few routings on my Cisco router 871 in order to allow my employees to have access only to specific websites.However, since some websites have dynamic IPs propably the route that I will create will not work.
My question is, can I configure a route or is there any other way to configure this permission based on the hostname/domain? For example, if I want to permit access to this website www.surveymonkey.com (75.98.93.51) instead of configuring:
ip route 75.98.93.51 255.255.255.255 192.168.10.250
is there any way to configure based on the url.. in order to be able to recognise this host correctly??
Currently, my company runs a DC and exchange server in the building. It is also hosting our website with IIS7. All AD users currently have @company1.com.au email addresses.We have just started an off shoot company and would like to setup emails in exchange so that we can automatically assign and manage emails on the same exchange server. so that each user hasWhat is the best way to do this?At the moment, company2.com - company is hosted outside with someone else. Is there a way that he can direct the mail to us so that he hosts the website but we host the email server?
View 1 Replies View Related