Actually not randomly. It's normally after weekly reboots. This causes the Great Plains DB to be locked to 1 person, so other people get errors.
Sometimes I can just unrestrict access, other times it's grayed out and I have to drop the DB and restart the services to take it out of single user mode.
SQL 2k3.
I got an ASA 5510 system currently in single context mode, with CSC SSM installed. Single ISP uplink to internet, no VPN. And now customer would like add another ISP uplink, without invest another box for HA.What come across my mind is make the current box into multi context. There's some area i need to concern and also need yours perspective on it.
Question 1: For making the firewall into multi context, am i need to do it from scratch, issue mode multiple command. Then rebuilt the current production config into one of the context, then another context meant for the new IPS uplink, and one admin context?
Question 2: For CSC -SSM licensing requirement, model ASA 5510 with security plus license is able to support 2 context. So if i split my firewall like what i mention in question, what exactly number of context do i own (admin, context A, context B)?
Question 3: For CSC-SSM module in multi context mode, so the management port of CSC SSM must attach at admin context?
Question 4: After configured all the policy and traffic to scan, how exactly i should do in order apply this policy to the interface? Should i only enable at admin context, then firewall service-policy rules, and apply it global, OR should i also do the same action on context A and Context B?
I want to create a local user in my Cisco ASA 5520 to allow the user to use the ASDM in Read-Only mode. I want the user to view the Dashboard only.
View 1 Replies View RelatedFound you on Google and prays that the regulars here will take pity on a former Juniper admin. I've got a brand new shop to handle that is all Cisco including CUCM 8.x and I have zero Call Manager experience. How to enable international calling for a single user
[code]...
brief flow/steps for making sure a user can dial international? I figured it was as easy as making sure their DN CSS had the ability to do so, but apparently not.
I am having an issue with the user VPNs. For users connected via the AnyConnect VPN client, all of their Internet traffic goes out their local Internet connection, since I am using split tunneling. However, I need a specific public IP address to go through the VPN tunnel and out the DIA at the main office, rather than the user's local internet connection. I managed to have this IP address go through the tunnel to the ASA at the main office, but it appears that it gets blocked somewhere there, or maybe the return traffic gets blocked. I am using an ASA 5520 at the main office, with software version 8.3.
View 3 Replies View RelatedI have a WLAN with 5 1200 Series AP (A/G) configured for Fast Roaming using the Cisco supplied documentation. Can I use one user name for all of my devices to connect to the Internal Radius Server? This would be similar to having a passphrase for WPA.
View 3 Replies View Relatedhow to set WLC 5508 to allow single create web authentication user account to get connected in a same time. i found that i can use the same username and password combo to be login in 2 machine in the same time.
View 4 Replies View RelatedI have a Cisco ASA 5505 that I've setup with an SSL VPN. This is for personal use, and I therefore don't have need for anything more than local authentication. [code]
I'd like to have one profile/policy where I only encrypt data going to my split-tunnel ACL, and I'd like to have one profile/policy where I encrypt all traffic.
The issue ive been fighting is - it doesn't seem like its possible to associate more than one group policy per user. If it IS possible - can you tell me how I associate both groups to my local account?
If you are using DAP-1522 A1 and set to 5GHz 802.11 n bridge mode but disconnect randomly. Don't bother to do any troubleshooting because DAP-1522 A1 only support 802.11 draft n and incompatible with 802.11 n. If unit still under warranty then call D-Link and request unit replacement and ask for hardware reversion B1.
A1 - Ralink RT2880+RT2850 chips
[URL]
B1 - Ralink RT3662 chip
[URL]
connecting a Cisco 3945 Router to an Ethernet WAN Link. The service provider has provided a 100M Ethernet Single Mode Fiber handoff to the customer premises with SC Connector. The CPE configuration proposed for this setup is like this.
Cisco 3945
EHWIC-1GE-SFP-CU (EHWIC 1 port dual mode SFP(100M/1G) or GE(10M/100M/1G)
GLC-FE-100LX 100BASE-LX SFP for FE port.
Since the SFP has LC Connector, i suppose i need to have an SC-LC Cable for connecting the Ethernet link. Do i need anything else, apart from above?
Will i need another RFS6000 controller to run a single AP650 (isolated remote location) or it can be set in stand-alone mode ? I might consider install one antenna per location in 5 different store.
View 6 Replies View RelatedUsing SFP-10G-LRM with single mode fiber? We have 1310nm.
View 2 Replies View RelatedI have 3 Data centres which I am linking up via Single Mode Single Strand Fibre.The switches at each data centre are WS-C4948-E
-Distance between Data Centre 1 and Data Centre 2 is 60km single mode single strand
-Distance between Data Centre 2 and Data Centre 3 is 70km single mode single strand
What type of SFP do I need to use in each Data Centre for the WS-C4948-E switches for these distances.
I have a new building to add to our campus and I have been encouraged to run single mode fiber. All of my other buildings are connected with multi-mode fiber. I just want to make sure i will not have an issue if I run single mode to the new building with SM SFP's.
View 2 Replies View RelatedI'm working with a customer who has an SGE2000P and a Catalyst 2960 to setup and configure a single mode fiber link. The SGE2000P has an MFELX1 fiber GBIC and the 2960 has a GLC-LH-SMD GBIC. When I have the customer plug in his fiber, there is a power light that comes on on the MFELX1 GBIC. Neither GBICs/switches show that a link or activity is occurring, but the presence of that light makes me think that they are connecting somehow. Are these two switches/GBICs compatible?
View 1 Replies View RelatedI'm looking for switches that support single mode fiber connections and would like to know if "WS-C3750-FS-S Catalyst 3750 24 100BaseFX + 2 SFP" and "WS-C3750G-12S-S Catalyst 3750 12 SFP" can serve the purpose?
View 6 Replies View RelatedThe module WS-X4306, support fibber fiber single mode ó fiber multi mode? what GBIC is for fiber single mode or fiber multi mode?
View 1 Replies View RelatedPrior we only had 62.5u multi mode.I've got 3750x switches and new SM SFP and yellow fiber patch cables. None of my links show connected. No lights and trunk port interfaces show down/down.
Is there a special command you have to do on a port when using SM fiber? Do you think I need cross over fibers?
Also, should I be able to see a laser signal light like MM or is SM a different frequency so it's not as visible as MM?
I have a 7206vxr with a NPE-G1 card in it. I am planning to add some PA-GE card with a ws-g5486 to light single mode Gigabit dark fibre.
it seems that users are experiencing throughput of around 200Mbps. Is this per card, or for the entire chasis? I have 6 free slots, if i were to fill 3 of them up with PA-GE card would i get 200Mbps on each card ?
I'm having a problem with some new gear and can't seem to figure it out. I have a 3750X-48P-S with a C3KX-10G-NM using SFP-10G-LR transceivers and I'm trying to trunk that with a 6509 that has a X2-10G-LR transceiver over single mode fiber. This is not working. Cisco TAC says the SFP+'s that we just got brand new are both bad and we need to order new ones. I find that hard to believe but who knows.
The switch recognized the module and I tested all 4 ports in gigabit mode using GLC-SX-MM transceivers, all worked great. I have the SFP+'s in tengig1/1/1 and 1/1/2 as they should be. There are no other SFP's in the module either.
When I do a sho int tengig1/1/1 and 1/1/2 the media type doesn't show the transceiver that is installed like it does for the GLC-SX-MM ones. Maybe it's not supposed to or maybe it just doesn't recognize them and it's a hardware issue.
I am troubleshooting a fiber connectivity issue.Now I have two switches, one is 3750, and another is small biz 300 series switch. Both switch has a single mode smf gbic. Now I have two swtiches face to face and connect with a single mode cable. Do you think if I would get a link light on? Both ports are no shutdown.
View 3 Replies View RelatedI am struggling to find an SFP transceiver, single mode, that operates at 100Mbps in a 1000Mbps port in an ME3600 or ME3800.
View 5 Replies View RelatedI have a requirement to connect two 3750 switch with 10G speed between two sites with 150km distance. We will lay-out our own fiber (48 core) between two sites. I just want to consult the following:
1. Could i use two core switch 6500 with single mode fiber as a transport equipment?
2. Or i need to use SDH equipment because of the distance concern? If so do i need a repeater?Could i use Cisco Metro Core ONS, which one?
3. Any other option to achieve this requirement?
We've just purchased a WS-C3750-24FS-S, only to find that the 100baseFX ports will not work over Single Mode fibre, backhaul links. Any way or a device that convert from MM to SM?
View 2 Replies View Relatedconnecting a Cisco 3945 Router to an Ethernet WAN Link. The service provider has provided a 100M Ethernet Single Mode Fiber handoff to the customer premises with SC Connector. The CPE configuration proposed for this setup is like this. [code]
Since the SFP has LC Connector, i suppose i need to have an SC-LC Cable for connecting the Ethernet link. Do i need anything else, apart from above?
I am facing the following issue. In our environment we have a couple of WS-C2960S-24TS-L configured as stack. These switches are configured as VTP mode transparent.We are running LMS 4.1 and although UserTracking Acquisition works fine for all other switches, it only runs on demand for the above. The user tracking report for these switches shows only the MAC of the connected end hosts, without the respective IP address. The vlan I am interested in is configured on both the gateway (cisco 6509) and the switches, and the subnet is routable.Show arp on the gateway does show the "mac-ip address" binding, so I would have thought that usertracking would have been able to report both IP and MAC.
Why does usertracking only run on demand for the above switches in vtp mode transparent?Why does the UserTracking report show only the MAC and not the IP?Are the above issues related to the vtp mode? I have ruled out any connection to the switch-model, because we have recently installed the same switches in VTP mode client and User Tracking Acquisition works fine for them.
I'm looking to implement a single proxy server for two different VLANs. Both VLAN have outgoing traffic configured through different ISP i.e. traffic for users on VLAN1 is routed through ISP1 and traffic for users on VLAN2 is routed through ISP2. Inter-VLAN communication is enabled. The proxy server should route internet traffic for users in VLAN1 through ISP1 and for users in VLAN2 traffic should be routed through ISP2.
View 6 Replies View RelatedI just want to keep one PC as a server and one switch connect to it (For LAN). I want to connect multiple client/screen to that server, so I can use single servers for multiple screen/client.(Client machine will not have any CPU, they will utilize servers memory.)
View 1 Replies View RelatedRoughly 10 or so computers and 10 or so printers connected to a server 2003 machine with att dal internet. Upgraded to att uverse and because of our program that we use (hotel management software) we have to keep the gateway / ip's all the same. Well for whatever reason, just so happen that our specific info that we have to use, the uverse modem has reserved for its self and we cant use it on there. We hook up a cisco e1000 router and have it act as the gateway so that we can configure our settings the way we need. Get everything going just perfectly fine. Sometime that night, 2 of the computers lose server/networked files access, but still have internet access. They only lose access to shared files, printers, etc... Logging off/on or restarting the pc's fixes the problem. But then every night almost like clockwork around the same time frame, it all happens again. I've changed ip's on the machines, changed settings here and there, but nothing has fixed the problem. The biggest pain is, I cant replicate the problem, I have to waot until that night to know if what I did worked or not. The last thing I tried was changing the lease expire timer in the router from 24 hours to 7 days. I figured I'd give that a try since it seems that its almost 24 hours exactly between errors.
View 19 Replies View RelatedI have a single DL 380 G5 server with 2 NIC , i have 2 applications which run on 2 separate WAN static ip addresses my query is that can i install both the applications on a single server ? secondly can i assign 2 different WAN static ips on the 2 NIC of the same server ? if yes then how it will be done i.e whether gateway will be given to both the NIC or only a single one
View 11 Replies View RelatedI have 2 internet connection with the same ISP, SmartBro 2mbps.We have 7 computer unit plus 1 unit that will serve as the server.Is it possible that we combine the two internet connection into just one LAN so that all PC's will see each other. Mainly for network gamesBTW, we don't have any routers or switch yet.
View 5 Replies View RelatedI have successfully set up a windows 2008 box as a Radius server and use it to authenticate VPN users against ta AD database.I have also set up a similar policy that permits authentication for management purposes to all my networking devices (routers,switches and the ASA).Both policies work fine.Of course I don't want every VPN user to have administrative access to the ASA and every other device on my network.How can I discriminate between the 2 groups (VPN users and Network administrators)
View 3 Replies View RelatedWe have a project in which we are using 34 Cisco SG200-18's each with a MGBLX1 (LC Single Mode Fiber) SFP mini-GBIC.All the fiber's come back to one building where we must "bridge" all 34 fiber connections. What hardware should be used to accomplish this? A L2 switch? For example, a 12 port SFP Switch with Fiber SFP's accepting the first 12 fiber connections, then other switch with SFP for the next 12 and so on, until there is a overall capacity of 36 and having patch cables between the 3 switches?
what cisco or non cisco hardware would work with these SF200-18's to accomplish this?