Communicate To Machine On A Subnet With Another On B
Dec 2, 2011
I have two routers in my office, each one having wireless extensions and its own DSL connection.I want machine on A subnet communicate with machine on B,I'll need some sort of physical connection (a cable? a new device?).Router A and B are typical home router with wifi extension: they only have a WAN port,I won't be able to let them talk to each other simpy by plugging an Ethernet cable between two LAN ports, since the two routers are on different subnets.
View 4 Replies
ADVERTISEMENT
Jan 3, 2013
I am trying to get an XP machine to communicate with 2 printers that are wired via USB to a windows 7 machine. Peachtree accounting is running on both machines and the windows 7 machine holds all the data this works fine but when I try to share the printers I can not. When I go into the window 7 Home Prem. network share and choose to allow printer and file shareing and close out the window cut off the computer reboot and go back into file and printer shareing both are in the off position what's up?
View 6 Replies
View Related
Oct 26, 2011
I have 2 subnet on the network, 192.168.10.x and 192.168.30.x.
192.168.30.x can ping .10.x and print from the printers on .10.x but 192.168.10.x can not ping or print from the other subnet (.30.x)
View 1 Replies
View Related
Apr 7, 2011
I have an GRE Tunnel across my head office and remote site with multiple subnets using cisco 1841 routers.I can ping most of the devices on the remote side, but I can not ping certain devices.These devices respond to ping requests on the local LAN, but not through the WAN link. If I change the IP of device than it start responding. I am using same gateway and mask on these devices.The remote site is running classic STP on switches with distribution switch being the root bridge.
View 4 Replies
View Related
Aug 2, 2011
I have a strange error on my home network that I cannot find a solution to.I have an Huawei SmartAX MT882 from TalkTalk acting as a modem connected to a D-Link DSL-G624T acting as a router/switch. Connected to the D-Link I have a Windows 7 Pro machine (64-bit, SP1) and an XP (home i think) machine (sp 2 i think).The SmartAX modem is set up to perform DHCP and DNS relaying and the D-Link has DHCP turned off and DNS relay turned off.The Win7 machine can access the network, get an IP address and access the internet without problems, regardless as to the status of the XP machine.The XP machine can access the network, get an IP address and access the internet with no problems ONLY of the win7 is powered up. When the win7 machine is off, the XP machine seems to drop about 25% of the ping packets between it and the D-Link router and has no internet access (because of this i assume). [code]
View 8 Replies
View Related
Jul 20, 2011
New Win-7 machine set up. I used the printer set-up wizard to install a networked printer in the new machine with absolutely no problem. Proved it would print from that machine.Now, I get a call informing me that her old XP machine, which had been printing to the network printer with no problems, will no longer print.Documents go into the print queue, but they don't get printed.No error messages show up.I did some messing around via remote access, and finally removed the printer with the intention of reinstalling it.Scanning for network printers turned up several redundant instances of the same printer with different names. Some are identified as "invalid" some a "access denied". Bottom line. I can't get any of the selections to install.On the Win-7 machine I did find a window that indicated that the printer is designated as being shared, but I didn't explicitly set it for sharing when I installed it. Also, I somehow got to a window that told me that for printers that were to be shared with other versions of windows I could optionally install drivers to support such machines. Didn't have the driver disk handy and took the window down. Now I can't even find it again.I need sorting this all out.Part of the problem is that out there in "network land" there are redundant remnants of previous installations that are being remembered inappropriately.
View 11 Replies
View Related
Apr 29, 2012
I have a network problem. My windows 7 machine is not detecting win xp machine whereas win xp machine is detecting win 7 machine. They are in the same workgroup named Home. And the networking system is set to work. I have left the homegroup I was previously in. I enabled file sharing for devices that use 40 bit and 50 bit encryption. On XP I have enabled NetBios over TCP/IP. File sharing is enabled on both computers. I think it's something obvious as both instalations on different computers are really fresh and both windows haven't been tampered with.
View 12 Replies
View Related
Aug 3, 2012
What I am trying to do is I have one switch with say a 10.1.9.1 sub-net I need to have one of the ports to be trucked with two vlans one for DSL and the other for a local connection with the sub-net of 10.1.5.1 both of the sub-nets are configured in the core as 9 and 5 so I have port 0 set up as a trunk and it is set up as ge-0/0/0.0 vlan_5, vlan_192 on the 10.1.9.1 subnet switch. The DSL is working but the local is not pulling a 10.1.5.1 IP and has no connectivity. Everything looks as if it is configured correctly but still the DSl is working but not the Local connection.
View 2 Replies
View Related
Sep 21, 2012
I am preparing for CCNA exam and for that I have been working with OSPF in packet tracer.In the scenario below I have made configuration with three routers and everything seems to be working well. However, following ping commands cannot be reached.PC0 cannot communicate with other two PCs. Others can.(can ping from PC1 to PC0 and PC2. Can ping from PC2 to PC0 and PC1 BUT CANNOT PING FROM PC0 TO PC1 and PC2) [code]
View 2 Replies
View Related
Dec 1, 2011
My friend and I bought Acer Aspire 5741's about 9 months ago and neither of us has had any problems until now. My friend went to connect to the internet via wireless router yesterday to find that there was limited connectivity (no internet access). We assumed it was a router issue and I gave her a number of things to check but all seemed ok with it. I went to her house to look at it today and when I ran the connection troubleshooter got "windows can't communicate with.......... (DNS server)". I connected my laptop via her router and everything was fine. I brought her laptop back to my house and tried to connect to the internet via my router and got exactly the same 'DNS' message - my laptop again connected without any problem.
I have re-booted the routers, laptops, network adapters etc and also checked the wireless adapter settings on both laptops, which appear to be the same. I have re-set the TCP/IP stack and have also tried ipconfig /release and /renew - none of which seems to have made any difference. the results of the tests are as follows (linksys is the SSID in use):
Windows IP Configuration
Host Name . . . . . . . . . . . . : Debbie-PC
Primary Dns Suffix . . . . . . . :
[Code].....
View 6 Replies
View Related
Jan 12, 2011
I've been having a problem with my browser lately, Its really slow and it turns out I have 1000 ping average ...the ping does up and down some times its 1 or 2 sometimes 500 . any way I get this msg when I use the diagnose option " Cannot communicate with DNS server(196.40.3.9) .
View 14 Replies
View Related
Nov 15, 2012
RIP works on which layer and how it works.how two routers communicate to each other.
View 1 Replies
View Related
Jul 16, 2012
Haven't been able to connect to the internet for the whole day,This is what I get when I run ipconfig in the cmd, tried doing the two resets but it won't work!
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:UsersFelicia>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Michelle-PC
[code]....
View 1 Replies
View Related
Nov 7, 2012
I need to get a dir 615 router in one room to comunicate wirelessly to a dir 655 in another room that is connected to my internet modem. I can't connect them with an ethernet cable. I need the extra ports on the dir 615 because the signal strength from the 655 is too weak
View 1 Replies
View Related
Sep 5, 2011
I have an skill exercise with 4 Routing Protocols Default Route,Static Route,Eigrp, Ospf. I have about 6-7 routers, and each of them has an routing protocol. But the problem is the Main router INTERNET, which it has to use Static in a direction, and default in the opposite path. This is the scheme of routers and how the r.protocol have to be configured.
View 19 Replies
View Related
Jan 21, 2012
I tested ospf multi-areas in packet tracer as shown in attached file.(Sorry I don't know how to upload the lab image.)There I got a problem that router 0 in area 1 and router 6 in area 3 cannot communicate.Except this, router 0 can communicate with other routers and the same to router 6. I have made a virtual link between backbone,area 1 and 2 ABR router 1 and area 2,3 ABR router 4.I use process id 123 for every area. But when I type "show ip route" in router 0, it is shown [code] when it is typed in router 6, it is shown [code] So, router 6 cannot communicate with router 0.I don't wanna make a static route to 1.0.0.0 network in router 6.
View 1 Replies
View Related
Jun 18, 2012
I recently set up our new Cisco Linksys E1000 router (we originally had a Belkin, but it is dying). It works perfectly fine on my desktop. However, there is only a "local connection" on my mom's laptop, a Toshiba Satellite running Vista. Diagnosis: Cannot Communicate with Primary DNS Server (68.105.28.12). I've read a bunch of other posts on many websites but so far nothing has worked.
View 3 Replies
View Related
Nov 30, 2011
My friend and I bought Acer Aspire 5741's about 9 months ago and neither of us has had any problems until now. My friend went to connect to the internet via wireless router yesterday to find that there was limited connectivity (no internet access). We assumed it was a router issue and I gave her a number of things to check but all seemed ok with it. I went to her house to look at it today and when I ran the connection troubleshooter got "windows can't communicate with.......... (DNS server)". I connected my laptop via her router and everything was fine. I brought her laptop back to my house and tried to connect to the internet via my router and got exactly the same 'DNS' message - my laptop again connected without any problem.
I have re-booted the routers, laptops, network adapters etc and also checked the wireless adapter settings on both laptops, which appear to be the same. I have re-set the TCP/IP stack and have also tried ipconfig /release and /renew - none of which seems to have made any difference. The results of ipconfig/all are:-
Windows IP Configuration
Host Name . . . . . . . . . . . . : Debbie-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code]....
View 10 Replies
View Related
Sep 13, 2011
I had my broadband installed and activated and I'm using my laptop with vista I've used it before with wireless Broadband and was fine but now I'm having trouble using the Internet, wifi is on and it is showing as connected to the router but when I open the web browser it is unable to connect, I used diagnostics and it comes up with the following:Cannot communicate with primary DNS server 194.168.4.100
View 5 Replies
View Related
Mar 24, 2011
Problem: No internet connection. 'Can't communicate with primary DNS server'Information: I am using a Windows 7 64 laptop (LAN connection) to connect to the internet. Two days ago this stopped working (after working fine for 3 months). Using windows troubleshoot I receive the message 'Can't communicate with primary DNS server'. I have checked the IPv4 and IPv6 and they are all set to automatic.I then tried to reset this using Microsoft 'fix it solution' as indicated Can't communicate with Primary DNS Server this still had no luck.I have also tried,
Reset WINSOCK entries to installation defaults: netsh winsock reset catalog
Reset IPv4 TCP/IP stack to installation defaults. netsh int ipv4 reset reset.log
Reset IPv6 TCP/IP stack to installation defaults. netsh int ipv6 reset reset.log
and ipconfig/ release and ipconfig/ renew none of this has made any difference. I can successfully ping the default gateway but cannot ping google. All packets time out.Additional information: Using an older laptop I am able to successfully connect to the internet on the same line. Also the laptop that is not working does work fine at work. So I don't even know if the problem is with the hub or the laptop.
View 4 Replies
View Related
Nov 13, 2011
My wireless connection showed connected but Internet Explorer kept showing the page cannot be displaced. When I clicked the diagnose connection problems, the message kept coming back with "Cannot communicate with primary DNS server (65.32.5.111)".
View 7 Replies
View Related
Apr 9, 2011
I'm having an absolute nightmare trying to get my laptop to connect to the internet. It will connect to our home network (virgin media cable broadband) locally but won't connect to the internet. I've tried a few of the fixes I've read on here such as changing the DNS settings myself but it's going nowhere.I can connect to other networks for example my parents virgin media network and the other laptops and my ps3 can all connect to our internet just fine so I really don't understand why mine isn't working.When I diagnose the problem it says "Cannot communicate with Primary DNS Server (194.168.4.100)" and underneath it says "Network diagnostics pinged the remote host but did not receive a response"
Here is the System info:
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft� Windows Vista� Home Premium , Service Pack 1, 32 bit
Processor: Intel(R) Pentium(R) Dual CPU T2330 @ 1.60GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 2037 Mb
Graphics Card: Mobile Intel(R) 965 Express Chipset Family, 448 Mb
Hard Drives: C: Total - 183238 MB, Free - 27189 MB;
Motherboard: Sony Corporation, VAIO, N/A, N/A
Antivirus: AVG Anti-Virus Free Edition 2011, Updated and Enabled
Here is the IPCONFIG/ALL:
Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:Windowssystem32>IPCONFIG/ALL
Windows IP Configuration
Host Name . . . . . . . . . . . . : sonny-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
[code]....
View 13 Replies
View Related
Feb 17, 2011
Wireless on this laptop will not connect. Another laptop connects without problems.DDS (Ver_10-12-12.01) - NTFSx86
Run by Owner at 20:48:45.56 on Fri 02/11/2011
[Code].....
View 2 Replies
View Related
Aug 22, 2012
My dad is all the sudden no longer able to connect his HP laptop to the internet, my moms netbook and my Mac connect with no problems.
View 9 Replies
View Related
Feb 9, 2012
A brand new network switch how i check this network switch on may pc how to communicate this switch very 1st time with pc
View 3 Replies
View Related
Jul 17, 2011
I'm having issues connecting to the Internet through my netgear router. The other laptops in the house work fine so I'm sure it's an issue with the setting on my laptop that are the issue. It connects to the router, tries to identify, them says unidentified and remains at a local only connection.The error says: cannot connect with primary dns server(192.168.2.1). Windows cannot resolve it itself.
View 5 Replies
View Related
Feb 28, 2013
i can't connnect to the internet wirelessly, i am able to with ethernet cable. i am able to connect to other networks with the computer. Reason i say it is a problem with one of my computers, is i am able to connect to the same internet with 4 other computers wirelessly. it is just this one computer. the computer is a HP Pavillion notebook 6000 series
View 13 Replies
View Related
Feb 21, 2011
I recently got new comcast internet installed on my PC and now i want to add a router but when i connect the router i keep getting the same error message, "Cannot communicate with primary DNS server" It also says it tried to ping but did not recieve or something like that. When i connect straight from the modem to the PC it works perfect but when i add the router it does not.[CODE]
View 7 Replies
View Related
Sep 30, 2011
How do I set up to computers to contaminate with each other in the same room
View 1 Replies
View Related
Jul 24, 2011
Upon trying to perform device discovery in LMS 3.2.1, we encountered this error stating "Cannot communicate with JRM Server."
View 1 Replies
View Related
Jun 22, 2012
I have two server computers. there IP addresses are:
1. 192.168.0.99
2. 192.168.1.99
Now, how to configure it for accessing data from each other?
View 7 Replies
View Related
Dec 5, 2012
I'm having a bit of trouble connecting to the internet on my desktop. Basically, my desktop computer, running windows 7, wired connection via LAN, is having trouble connecting to the internet. It appears to be connected to the internet (all indicators are "green light"), but when I attempt to open a browser, for example, there is no response. After running a diagnosis, I found this: Windows can't communicate with the device or resource (Primary DNS server). The strange thing is that our apartment wireless network works just fine. I looked around on here for a solution, but all were entertaining laptops with wireless connections. My IPs are set to automatic as well.
View 4 Replies
View Related
May 5, 2011
I have recently gotten a Virgin Super Hub router and everyone in the house is able to connect to the internet fine except me. I have a Toshiba laptop with Windows Vista running on it. I am able to connect locally to the network however it lists it as an "unidentified network" and when I try to diagnose the problem I receive notifications such as "Cannot communicate with primary DNS server 194.168.4.100" and "Network Diagnostic pinged remote host but did not receive a response. When I have a cable plugged into the router and my laptop I am able to connect but on a separate network "Network 3".
View 7 Replies
View Related
