Setup 2 Computers To Communicate With Each Other?

Sep 30, 2011

How do I set up to computers to contaminate with each other in the same room

View 1 Replies


ADVERTISEMENT

How Computers On Separate Subnets Communicate With One Another

Mar 13, 2011

I have two groups of students I wish to seperate by subnetting. Students are nine in each group, and there's one Cisco router (or W-server set as a router). After giving group A an IP of 192.168.200.1, and group B an IP of 192.168.200.129 and connecting each interface to it's own seperate switch, what else does each PC user need to do to establish communication with members not in his/her own subgroup?

View 1 Replies View Related

How To Get WLAN Computers To Communicate With Equipment On LAN

Dec 19, 2012

On a small office setup we have many computers connected to one another using wireless LAN. One of the PCs on the WLAN also has a LAN connection with a few other equipment connected to it. The WLAN IP Addresses are 192. 168. 1.XXX and the LAN addresses are 192.168.0.XXX. How can I get to communicate the WLAN computers with the equipment on LAN.

View 7 Replies View Related

Setup A Network With 100 Computers Along With Router?

Oct 29, 2011

i want to enquire how we can setup a network with 100 computer along with router, firewall, print server, file server. diagram of network to understand the things.

View 1 Replies View Related

Wireless Router To Multiple LAN Computers Setup?

May 9, 2012

I have one wireless router, 2 computers, 3 wifi laptops. so i want connect these all things in network.

View 1 Replies View Related

Three Computers - Internet Modem And Router Setup

Jul 14, 2011

We have three laptops in our house. We are set up with internet that gives me a direct connect and up to eight wireless devices. My son and daughter-in-law use the wireless and I use the direct connect. M son added a router (which I have no idea what that does) and set up networking on his computer (which I also have no idea what that does). When I am the only one on the computer, it flys. When either of them get on thiers too, it slowes a little. When both of them get on, I might as well get off because it can take up to three and a half minutes to load a page.

View 3 Replies View Related

Setup A Hard Wired Network For 30 Computers?

Jan 28, 2013

I want to setup a hard wired network for 30 computers

View 1 Replies View Related

Cisco :: SF302-08 VLAN Setup - VLAN Cannot Communicate With Each Other?

Nov 27, 2012

I am trying to set up a Vlan on an SF-302-08 small business switch. I would like two Vlans both with internet access but the two cannot communicate with each other. I am not really sure how to go about setting this up as its all fairly new to me. I have successfully set up the Vlans and the ports on each VLAN cannot communicate with each other however the internet access will only work when plugged into either VLAN but wont work on both together

View 1 Replies View Related

Business Network Setup -restrict Access To Some Of The Computers?

Jun 26, 2012

I have a client who has asked me to "optimize" their network.They currently have a few shared folders that everyone can see, but what they want is to restrict access to some of the computers on the network.More specific,they don't want the receptionist and the backroom workers to have access to those shared folders while the rest of the employees (the bosses) do have access to those folders.They have 2 computers with Windows 7, 2 computers with Windows XP, and a mac.

View 4 Replies View Related

Advanced Security Options For Wireless Setup (45 Computers)

Jul 25, 2011

Our company is moving to a new location temporarily and we will be looking to do wireless for our network instead of wired. We have a dell power edge 2900 server running windows SBS 2008 and a switch with more than enough ports for what we need.What i need to know is how exactly to do the wireless and what hardware would work best for us. We plan to have approximately 45 computers hooked into the server and have some wired but for the most part wireless. Also we would want to look into advanced security options for our wireless set up as we will be in the same building as a few other companies.

View 5 Replies View Related

Two Internet Connection (same ISP) To A Single LAN (8 Computers With Server Setup)

Aug 9, 2012

I have 2 internet connection with the same ISP, SmartBro 2mbps.We have 7 computer unit plus 1 unit that will serve as the server.Is it possible that we combine the two internet connection into just one LAN so that all PC's will see each other. Mainly for network gamesBTW, we don't have any routers or switch yet.

View 5 Replies View Related

Setup A Wired Network Between Computers But Leave The Wifi On Them?

May 5, 2011

I'm sort of new to networks so I'm not sure if this is even possible but what I'm trying to do is set up a wired network between computers but leave the wifi on the computer as how it connects to the internet. I'm using two computers connected through a lynksys router(not connected to the internet) and ethernet cable, and one of the computers has a wireless card that connects to another router that is connected to the internet. i can set up a network between the two computers but then the one can't connect to the internet(even though it says it is connected the network with internet),

View 2 Replies View Related

Home Network :: Setup A Remote Desktop Connection For 3 Computers?

Apr 28, 2011

i want to setup a remote desktop connection for 3 computers on the same network to connect to remotely. Originally i was going to port forward the original windows RDP port and run the windows rdp service but learnt that XP Home Edition doesn't support this feature. I want to be able to log onto these computers at any time remotely with the need of accessing the computer before i connect.

View 2 Replies View Related

Home Network :: Setup A Local Network Between The 3 Computers But Separated?

Jun 28, 2012

i'm connected to the internet through a shared internet connection through a switch,and also have 3 computers connected to the same switch,what i want to setup a local network between the 3 computers but separated from the internet network?

View 6 Replies View Related

Cisco :: PC0 Cannot Communicate With Other Two PCs

Sep 21, 2012

I am preparing for CCNA exam and for that I have been working with OSPF in packet tracer.In the scenario below I have made configuration with three routers and everything seems to be working well. However, following ping commands cannot be reached.PC0 cannot communicate with other two PCs. Others can.(can ping from PC1 to PC0 and PC2. Can ping from PC2 to PC0 and PC1 BUT CANNOT PING FROM PC0 TO PC1 and PC2) [code]

View 2 Replies View Related

Unable To Communicate With DNS?

Dec 1, 2011

My friend and I bought Acer Aspire 5741's about 9 months ago and neither of us has had any problems until now. My friend went to connect to the internet via wireless router yesterday to find that there was limited connectivity (no internet access). We assumed it was a router issue and I gave her a number of things to check but all seemed ok with it. I went to her house to look at it today and when I ran the connection troubleshooter got "windows can't communicate with.......... (DNS server)". I connected my laptop via her router and everything was fine. I brought her laptop back to my house and tried to connect to the internet via my router and got exactly the same 'DNS' message - my laptop again connected without any problem.

I have re-booted the routers, laptops, network adapters etc and also checked the wireless adapter settings on both laptops, which appear to be the same. I have re-set the TCP/IP stack and have also tried ipconfig /release and /renew - none of which seems to have made any difference. the results of the tests are as follows (linksys is the SSID in use):

Windows IP Configuration
Host Name . . . . . . . . . . . . : Debbie-PC
Primary Dns Suffix . . . . . . . :

[Code].....

View 6 Replies View Related

Cannot Communicate With DNS Server

Jan 12, 2011

I've been having a problem with my browser lately, Its really slow and it turns out I have 1000 ping average ...the ping does up and down some times its 1 or 2 sometimes 500 . any way I get this msg when I use the diagnose option " Cannot communicate with DNS server(196.40.3.9) .

View 14 Replies View Related

How Two Routers Communicate To Each Other

Nov 15, 2012

RIP works on which layer and how it works.how two routers communicate to each other.

View 1 Replies View Related

Cannot Communicate With DSN Server

Jul 16, 2012

Haven't been able to connect to the internet for the whole day,This is what I get when I run ipconfig in the cmd, tried doing the two resets but it won't work!

Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:UsersFelicia>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Michelle-PC

[code]....

View 1 Replies View Related

How To Get Dir 615 To Communicate Wirelessly To Dir 655

Nov 7, 2012

I need to get a dir 615 router in one room to comunicate wirelessly to a dir 655 in another room that is connected to my internet modem. I can't connect them with an ethernet cable. I need the extra ports on the dir 615 because the signal strength from the 655 is too weak

View 1 Replies View Related

Routing Protocols Cannot Communicate Together

Sep 5, 2011

I have an skill exercise with 4 Routing Protocols Default Route,Static Route,Eigrp, Ospf. I have about 6-7 routers, and each of them has an routing protocol. But the problem is the Main router INTERNET, which it has to use Static in a direction, and default in the opposite path. This is the scheme of routers and how the r.protocol have to be configured.

View 19 Replies View Related

Cisco :: Router 6 Cannot Communicate With 0

Jan 21, 2012

I tested ospf multi-areas in packet tracer as shown in attached file.(Sorry I don't know how to upload the lab image.)There I got a problem that router 0 in area 1 and router 6 in area 3 cannot communicate.Except this, router 0 can communicate with other routers and the same to router 6. I have made a virtual link between backbone,area 1 and 2 ABR router 1 and area 2,3 ABR router 4.I use process id 123 for every area. But when I type "show ip route" in router 0, it is shown [code] when it is typed in router 6, it is shown [code] So, router 6 cannot communicate with router 0.I don't wanna make a static route to 1.0.0.0 network in router 6.

View 1 Replies View Related

Cannot Communicate With Primary DNS Server (68.105.28.12)

Jun 18, 2012

I recently set up our new Cisco Linksys E1000 router (we originally had a Belkin, but it is dying). It works perfectly fine on my desktop. However, there is only a "local connection" on my mom's laptop, a Toshiba Satellite running Vista. Diagnosis: Cannot Communicate with Primary DNS Server (68.105.28.12). I've read a bunch of other posts on many websites but so far nothing has worked.

View 3 Replies View Related

Windows Can't Communicate With DNS Server

Nov 30, 2011

My friend and I bought Acer Aspire 5741's about 9 months ago and neither of us has had any problems until now. My friend went to connect to the internet via wireless router yesterday to find that there was limited connectivity (no internet access). We assumed it was a router issue and I gave her a number of things to check but all seemed ok with it. I went to her house to look at it today and when I ran the connection troubleshooter got "windows can't communicate with.......... (DNS server)". I connected my laptop via her router and everything was fine. I brought her laptop back to my house and tried to connect to the internet via my router and got exactly the same 'DNS' message - my laptop again connected without any problem.

I have re-booted the routers, laptops, network adapters etc and also checked the wireless adapter settings on both laptops, which appear to be the same. I have re-set the TCP/IP stack and have also tried ipconfig /release and /renew - none of which seems to have made any difference. The results of ipconfig/all are:-

Windows IP Configuration

Host Name . . . . . . . . . . . . : Debbie-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No

[code]....

View 10 Replies View Related

Communicate To Machine On A Subnet With Another On B

Dec 2, 2011

I have two routers in my office, each one having wireless extensions and its own DSL connection.I want machine on A subnet communicate with machine on B,I'll need some sort of physical connection (a cable? a new device?).Router A and B are typical home router with wifi extension: they only have a WAN port,I won't be able to let them talk to each other simpy by plugging an Ethernet cable between two LAN ports, since the two routers are on different subnets.

View 4 Replies View Related

Cannot Communicate With Primary DNS Server 194.168.4.100

Sep 13, 2011

I had my broadband installed and activated and I'm using my laptop with vista I've used it before with wireless Broadband and was fine but now I'm having trouble using the Internet, wifi is on and it is showing as connected to the router but when I open the web browser it is unable to connect, I used diagnostics and it comes up with the following:Cannot communicate with primary DNS server 194.168.4.100

View 5 Replies View Related

How To Make 2 Subnet Communicate

Oct 26, 2011

I have 2 subnet on the network, 192.168.10.x and 192.168.30.x.

192.168.30.x can ping .10.x and print from the printers on .10.x but 192.168.10.x can not ping or print from the other subnet (.30.x)

View 1 Replies View Related

Can't Communicate With Primary DNS Server

Mar 24, 2011

Problem: No internet connection. 'Can't communicate with primary DNS server'Information: I am using a Windows 7 64 laptop (LAN connection) to connect to the internet. Two days ago this stopped working (after working fine for 3 months). Using windows troubleshoot I receive the message 'Can't communicate with primary DNS server'. I have checked the IPv4 and IPv6 and they are all set to automatic.I then tried to reset this using Microsoft 'fix it solution' as indicated Can't communicate with Primary DNS Server this still had no luck.I have also tried,

Reset WINSOCK entries to installation defaults: netsh winsock reset catalog

Reset IPv4 TCP/IP stack to installation defaults. netsh int ipv4 reset reset.log

Reset IPv6 TCP/IP stack to installation defaults. netsh int ipv6 reset reset.log

and ipconfig/ release and ipconfig/ renew none of this has made any difference. I can successfully ping the default gateway but cannot ping google. All packets time out.Additional information: Using an older laptop I am able to successfully connect to the internet on the same line. Also the laptop that is not working does work fine at work. So I don't even know if the problem is with the hub or the laptop.

View 4 Replies View Related

Cannot Communicate With Primary DNS Server (65.32.5.111)

Nov 13, 2011

My wireless connection showed connected but Internet Explorer kept showing the page cannot be displaced. When I clicked the diagnose connection problems, the message kept coming back with "Cannot communicate with primary DNS server (65.32.5.111)".

View 7 Replies View Related

Cannot Communicate With Primary DNS Server (194.168.4.100)

Apr 9, 2011

I'm having an absolute nightmare trying to get my laptop to connect to the internet. It will connect to our home network (virgin media cable broadband) locally but won't connect to the internet. I've tried a few of the fixes I've read on here such as changing the DNS settings myself but it's going nowhere.I can connect to other networks for example my parents virgin media network and the other laptops and my ps3 can all connect to our internet just fine so I really don't understand why mine isn't working.When I diagnose the problem it says "Cannot communicate with Primary DNS Server (194.168.4.100)" and underneath it says "Network diagnostics pinged the remote host but did not receive a response"

Here is the System info:

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft� Windows Vista� Home Premium , Service Pack 1, 32 bit
Processor: Intel(R) Pentium(R) Dual CPU T2330 @ 1.60GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 2037 Mb
Graphics Card: Mobile Intel(R) 965 Express Chipset Family, 448 Mb
Hard Drives: C: Total - 183238 MB, Free - 27189 MB;
Motherboard: Sony Corporation, VAIO, N/A, N/A
Antivirus: AVG Anti-Virus Free Edition 2011, Updated and Enabled

Here is the IPCONFIG/ALL:

Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:Windowssystem32>IPCONFIG/ALL

Windows IP Configuration

Host Name . . . . . . . . . . . . : sonny-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid

[code]....

View 13 Replies View Related

Wireless :: Cannot Communicate With DNS Server

Feb 17, 2011

Wireless on this laptop will not connect. Another laptop connects without problems.DDS (Ver_10-12-12.01) - NTFSx86
Run by Owner at 20:48:45.56 on Fri 02/11/2011

[Code].....

View 2 Replies View Related

Cannot Communicate With Primary DNS Server 19.168.331

Aug 22, 2012

My dad is all the sudden no longer able to connect his HP laptop to the internet, my moms netbook and my Mac connect with no problems.

View 9 Replies View Related

How To Communicate A Network Switch With PC

Feb 9, 2012

A brand new network switch how i check this network switch on may pc how to communicate this switch very 1st time with pc

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved